Check the winners The Grow Awards 2026 🏆
Likes
Comments
Share
This week will be the Last week probably, I just flushed them and will not water them any more. I Put the lightcircle down from 20 hours to 18.
Likes
7
Share
The bruccies are continuing to mature, they are probably going to get harvested sometime in the next week. One has been on flush mode for about 5 days now, going to give it another 3 or 4. About to start the other one on flush once most pistils are orange. They are both chugging about 6 gallons each per week.
Likes
9
Share
6/8 Haven't had to water yet (besides the two tens and I should've held off). It's an overcast day. Perfect for the plants. I've noticed more off shoots of 3 pronged leaves so a few plants will reveg but thats fine. I'm happy with how things are going thus far. These are certainly very resilient strains. I've done some SLIGHT LSTing. EDIT: IT'S BEEN A NICE DAY TODAY. A LITTLE OVERCAST BUT SUNNY AT TIMES. PERFECT WEATHER FOR THE GIRLS. THEY ARE LOVING IT OUT THERE! 6/9 And the girls are lookin' Fiiiiiine. In all seriousness everything is doing pretty good. Even that overwatered pink kush runt in the 10gal is coming out of its little funk. Some of my FIM's turned out amazing! With the reveg of some of these I'll definately have my hands full. Very grateful for smart pots and well draining soil! We've gotten some harsh rain but the girls all seem fine. It's the wind today that's a little worrisome. I may stop over later. I COULD put up tarps around the cage as wind blocks (and have before in the past) but it increases the humidity of an already extremely humid day. These girls are strong. I'm sure they'll be fine. I've found that the tarps typically hurt worse than they help.
Likes
18
Share
@RFarm21
Follow
9 março - 15 março 12 março - feeding 16 março - cheese #1 feeding: Bio bloom 0.5ml ; top max 0.5ml ; bio heaven 1.5ml; sílica 0.1ml; bio grow 0.7ml 16 março - cheese #2 feeding: Bio bloom 0.5ml ; top max 0.5ml ; bio heaven 1ml; bio grow 0.5ml
Likes
3
Share
@MrPipi
Follow
Yeah Lance is definetly recovering. Fascinating how this stunned him, and he and Frank are now so far apart, but same strain, same soil, same everything. Mr. Pipi will see how Lance turns out. I´m still hoping for good and quick recovery. First Pistils showed up on all the plants on Day 23. So in the next one or two Weeks Mr. Pipi expects the Flower to start. Endspurt Sportsfreunde. So as we can see in the Video Pedro is the tallest, and his overall structure is Mr. Pipis favorite, for now. Not so bushy as the Bloody Skunks but we´ll have to see what the Stretch says. The opportunity was given to tie Pedro´s main stem down. So Mr. Pipis canope stays around the same level. Initally I wanted to not manipulate them, but that´s what Mr. Pipi loves in growing. You watch´em and if you bond enough with your plants, you´ll know what to do. be in a symbiosis. But dont use Pipi on your plants.
Likes
Comments
Share
@Kardo
Follow
Die Purple Haze wächst sehr gut hat gesunde Triebe und die werden jetzt verdoppelt mal gucken wie sie es erträgt
Likes
19
Share
Start of WK3 day 17 of flower. As you can see the sour diesel has not stretched past the others. I just bought a new light (SE4500) and been hanging it about 30 inches from the canopy and this has def influenced this stretch. The northern lights is my favorite structure so far, really tight nodes and are going to form some nice colas. The Grandaddy purp I think has the most uniform canopy and feel its gonna fill out nicely. Top dressed on 3-16 with Gaia green power bloom and all purpose along with some worm castings
Processing
Likes
6
Share
Week 5 I believe and they’re doing great..topped them lil over a week ago. Thinking another week or two then flip to flower! 😎
Likes
9
Share
📆 Semana 10: La Epsilon F1 Auto continúa su floración con gran estabilidad. Los cogollos ganan densidad y brillo, con tricomas cada vez más notorios, indicando una producción de resina prometedora. El perfil aromático se intensifica con notas cítricas y especiadas más marcadas. Se mantiene la alimentación con fósforo, potasio y azúcares para consolidar la formación de flores, sin signos de sobre-fertilización ni estrés en la planta. 🌱 Todo en marcha hacia una cosecha de calidad. ¡Seguimos creciendo fuerte! 💪
Likes
8
Share
@pzwags420
Follow
On day 1 the plants are looking good. I confirmed that my one cola was seeded, so I removed all visible seed pods. After this run I will do a deep cleaning to make sure there is no pollen in my grow box. The rest of my plant colas seem fine... I changed out my reservoir and adjusted the PH to 6.1. I also dimmed my light to 75% to mimic spring conditions. On day 2 I adjusted the PH of the reservoir down to 6.1. The plants are looking great besides a few fox tails from too much light. On day 3 the PH in the reservoir is 6.2. On day 4 I diluted my reservoir with plain water to lower the ppm down to 400 ppm, and I adjusted PH to 6.2 . The buds are ripening for sure and smell great! I haven't gotten any autumn colors yet even though I have dimmed my grow light and lowered my night time temps. I hope by 8 weeks the plants will have some more purple tones but if not I'm good with the flower quality thus far :). The breeder says 7-8 weeks so I'm hoping I am close to the finish line. I will continue to monitor the trichomes for ripeness. On day 5 I adjusted the reservoirs PH to 6.0. I harvested my seeded cola on Pheno #1 as it had stopped growing/ripening and would be a good tester ;) On day 6 the reservoirs PH is 6.2. On day 7 the PH is 6.0 50 % pistils have turned amber so I believe I have entered my harvest window and expect to flush and harvest soon:) very excited!
Likes
9
Share
03.01.2026 – BT62 Es ist soweit: Die erste Pflanze wird geköpft. Gleichzeitig war sie auch die schwierigste von allen drei, dennoch bin ich mit dem Ergebnis zufrieden. Das Ganze wird nun mit der DryRocket getrocknet. Größere Sonnensegel wurden entfernt, zudem wurde darauf geachtet, dass sich möglichst wenige Buds oder Blätter berühren. Ich bin auf jeden Fall sehr gespannt, was das Teil kann und ob es für mich zukünftig eine Alternative zum Trocknen darstellt. Ich halte euch natürlich auf dem Laufenden. Des Weiteren möchte ich mich bei Shogun, DrainMaster und DryRocket für die Möglichkeit bedanken, ihre Produkte testen zu dürfen – das ist natürlich nicht selbstverständlich! Hier die Links zu den folgenden Brands: https://drain-master.de/ https://www.shogunfertilisers.com/de/ https://dryrocket.com/en/ ***UPDATE ZU DRYROCKET*** Ich habe die DryRocket am 03.01. gestartet. Zu Beginn lag die relative Luftfeuchtigkeit bei ca. 57–59 %, das Growzelt war vollständig geschlossen, inklusive aller Öffnungen. Anfangs habe ich versucht, das Zelt zusätzlich mit Tape abzudichten, allerdings hat sich dieses relativ schnell wieder gelöst. Am 05.01. habe ich das komplette Zelt mit Frischhaltefolie umwickelt. Dadurch konnte sich die RLF stabil bei 60–62,9 % einpendeln. Ab Tag 4 bzw. gegen Ende der Trocknung ist die Luftfeuchtigkeit dann kontinuierlich gefallen. Die Temperatur lag über den gesamten Zeitraum größtenteils konstant zwischen 19,5 und 21,5 °C. Lediglich für ein paar Stunden gab es einen Peak von 23,9 °C, ansonsten keine größeren Schwankungen. Die Buds waren überwiegend klein bis mittelgroß, optisch sehr sauber und das Terpenprofil ist nach wie vor sehr gut erhalten. Das Nassgewicht lag insgesamt bei ca. 335g. Nach Abschluss der Trocknung kamen die Buds für 2 Tage in ein luftdichtes Glas. Dort lag die RLF bei 52–54 %, was fürs Curen eher knapp, aber noch im Rahmen ist. Mittlerweile wurde alles in Grove Bags umgefüllt, dort hat sich die RLF bei ca. 55 % eingependelt. Die DryRocket funktioniert, man muss jedoch wirklich darauf achten, dass das Zelt so dicht wie möglich ist. Bei mir hat es ab Tag 3 deutlich geholfen, das komplette Zelt mit Frischhaltefolie zu umwickeln. Ich möchte klar sagen, dass ich für das Testen der DryRocket nicht bezahlt werde und mir die Rakete auch nicht geschenkt wurde. Grundsätzlich halte ich die Rakete für eine sehr gute und durchdachte Idee. Das Produkt ist Made in Germany, kommt aus meiner Region und in dieser Form gab es meines Wissens nach bisher nichts Vergleichbares. Der Ablauf ist extrem einfach: Pflanze ernten, aufhängen, Rakete starten – mehr muss man nicht tun. Aufgrund meiner Rückmeldung zur etwas zu niedrigen RLF wurde von DryRocket offen und lösungsorientiert reagiert. Es wurde nicht versucht, den Fehler auf den Kunden zu schieben. Stattdessen wird aktuell an Optimierungen für kleinere Mengen unter 500 g gearbeitet. Für die Zukunft würde ich mir wünschen, dass man das RocketFuel (Silica Gel) regenerieren oder zur Regeneration einschicken kann. Außerdem fände ich eine erweiterte App mit mehr Parametern und Einstellmöglichkeiten sehr sinnvoll. Der aktuelle Preis liegt bei 299 € inkl. Rocket Fuel. Ob einem das den Preis wert ist, muss jeder für sich selbst entscheiden. Produktion und Support sitzen in Deutschland was ein klarer Pluspunkt für mich ist. Ein weiterer Test folgt ! Wer mehr Informationen möchte, kann hier gerne reinschauen. In diesem Thread hat DryRocket viele Fragen zu ihrem Produkt beantwortet: https://forum.cannabisanbauen.net/t/nur-ein-entfeuchter-dryrocket-innovativ-oder-ueberfluessig-lasst-uns-das-klaeren-ama-mit-dryrocket/74222
Likes
4
Share
Will take better soon. She’s moving along. One more week The trichomes are super sandy feeling.
Likes
Comments
Share
@Lolasola
Follow
We start to see the purple ☘️🤩 2.5ec 47day flowering
Likes
91
Share
@Salokin
Follow
Hi Growmies, I'm excited to share some big news today! Although there have been some unexpected twists, it's all part of the incredible journey of gardening. I've just completed the harvest, a tad earlier than initially planned, due to finding a bit of mold in one of the buds. Despite this minor hiccup, the trichomes were already at a decent 10% to 15% amber. So, all things considered, the timing ended up being pretty spot-on. The harvested weight was a solid 609 grams after trimming, which is quite a feat! A lesson learned for next time: perhaps I let her grow a few too many buds, leading to a denser canopy than ideal. But on the bright side, the aroma is absolutely divine. I sampled an airy bud that had dried a bit, and wow, it packs a stronger punch than its clone mother. And the flavor? Pure, unadulterated cheese – no hint of pineapple here! Now, the anticipation builds for the final dry weight, which I should know in about 3-4 days. It's always exciting to see the fruits of our labor fully realized. A huge thanks to everyone who's been following along on this journey. Your interest and support mean the world. And now, the adventure continues! I've started on Epic Buzz by Anesia Seeds. The diary for this new chapter is up and running, and the seedlings have already sprouted, marking the beginning of another exciting phase. (https://growdiaries.com/diaries/185718-grow-journal-by-salokin) I can't wait to share more updates with you all. Here's to the continued growth and learning in our gardening adventures!
Likes
22
Share
Flowering day 74 since time switch to 12/12 h. Hey guys :-) Finally the time has come . The lady was harvested and hung upside down in the dry tent 😍. Before that, she stood in the drying tent in complete darkness for 2 days and the large leaves were removed. The small leaves stay attached during the drying process so that they protect the buds and allow them to dry more slowly and evenly :-) . In the dry tent, the temperature is 18-19.5 degrees and the humidity is 54-58% 👍. In this environment they are now allowed to hang for 10-14 days before they are fine-tuned and trimmed clean by hand. then after trimming they come to ferment for 6-12 weeks in dark jars with bobeda packs 62% to keep the perfect humidity. After a few weeks, the Boveda packs 58% are used so that they can slowly dry out :-) . Of course there is one last update after trimming. Until then, I wish you a lot of fun with the update. Stay healthy and let it grow 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 A thank you for this wonderful strain goes out to Herzog https://instagram.com/herzog030?utm_medium=copy_link and the Exotic Seeds team You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. You can buy this Strain at : https://www.exoticseed.eu/ Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼 MadeInGermany
Likes
26
Share
@Growin_it
Follow
Top dressed Asman and Asal with a tablespoon of Dr. Earth Bloom and 3 tbs of worm castings. Added terpinator, microbials and molasses to calmag'd water. Benesh got fed last week with the same load/mix and is doing great. No defoliation or much training early this week. Did some heavier defoliation on Sunday to give more of the bigger and higher buds space. Will make a TCHA tincture off of the defoliated buds, which I will add to later. Lovely mint and chocolate aromas on my fingers after the defoliation.
Likes
4
Share