Likes
Comments
Share
@BigGGrows
Follow
This week i harvested her on day 88 from seed week 13. This girl had some issues. She none the less survived long enough to finish up. Around the 2 week of flower she began burning up underneath the led's ( which don't get that hot). It's really weird, because out of 3 plants that were under the led's i run, this candy kush was the only one to react this way. I narrowed it down to this being the issue after flushing and verifying run off ph, defoliation, and nutrient decreases.She was also transplanted during preflower from a 1 gallon to a 5 gallon pot, which she took to well and really grew alot bigger from. I pulled off soooo many damaged leaves from the issues that occurred from the burning. It was so bad, i eventually built a greenhouse for her to finish up in. Although i think she could have been grown better and produced more, i cannot complain. I did oven bake some bottom branch larf buds and rolled up a sample. Of course the terpines were garbage and she tasted like shit haha, but the high was pretty good and intense! After she is done drying i will supply dry picks and weights, then she will be going into them curing jars. Oh and she was flushed for one week using only tps signal and molasses. She will indeed get another run in the future.
Likes
4
Share
Likes
12
Share
Starting to fill out nicely now
Likes
13
Share
One plant has got purple top buds. Very strong smell. I’m doing the flushing for the excess nutrients.
Likes
12
Share
@Tagadatek
Follow
Il me semble que les puissante brûlure son due au pk13-14. J'ai effectuer un rinçage . En attente de résultats, espérons ne pas brûler les bud
Likes
178
Share
This week has gone fine except for one thing which I’ll come to later on. Still stretching, canopy par level is 900 on average and I don’t have any way of getting the lights up further. Hoping the intense light will slow the stretch down a bit but we will have to wait and see. Worst case I’ll have to dim the lights down a bit. That leads me onto the mystery of this week. The nearly dead plant. I have no idea why it has gone so limp. You can kind of see on the photo lapse how quickly it collapses. Incase it’s some kind of disease I’ll give it another day in there. If it doesn’t recover I’ll have to pull her out and try to train the other plants over her empty spot so I don’t waste any light. EC is around 1.2-1.5 atm, the highest dose I’ll be giving them will be week 4 and 5 of flower when the buds seem to do the most weight gains (visually). Canopy is actually quite even if you overlook the hole in the canopy, maybe a couple inches between highest and lowest. Anyway, thanks for checking in guys, if anyone has any thoughts/comments about the dead plant let me know as I’m struggling to find answers online. 😊
Likes
18
Share
@Chubbs
Follow
Weekly update on these lovely ladies. They've improved a bunch since last week as I think they needed a boost of nutes. I added some grow nutes to add some nitrogen and I think it worked. The pistols on the Colas are very cool to look and see the the flowers starting to form. All in all Happy Growing.
Likes
40
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ We planted 5 seeds, our goal is 2 plants of this strain for this 4x4 (all extra plants will live out in the 5x5)..we're using a brand new light for this grow, the Solux350 by Hortibloom! 💡🌱(https://hortibloom.com/products/solux-350-led-grow-light)... This tiny fixture emits a ton of light for its size..we have 20 seedlings under her, hung at the recommended 24inches and at 25% power..I'm really excited to see what this light is capable of! Thanks for dropping by and happy harvests everyone!! ❤️💡🌱😽💨 ⚡Hortibloom/Solux 350⚡ Specifications ⚙️: Diodes: Samsung LM281 Pro / Osram DR (1,440 total)💡 Driver: Inventronics 350 watt🔌 PPF: 1015 μmol/s ☢️ PPE: 2.9 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 14.3lbs lbs (6.5kg) Veg Coverage: 5 x 5 ft 🌱 Flowering Coverage: 4 x 4 ft 🌼 -The Solux 350 uses an aluminum heatsink (no fan), quiet operation 👂⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Many units may be daisy-chained via RJ14 and dimmed from a single controller 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Likes
7
Share
@Ruthlez
Follow
Blütetag 49. Die linke Pflanze welche ich getoppt ist geht langsam in den Herbst und ist gefühlt schon etwas weiter als die rechte welche ich mit LST trainiert habe. Beide entwickeln sehr starken Geruch und ihre typische lila Farbe. Die trichome sind unter dem Mikroskop bei diesem Pflanzen milchig,bei der rechten entstehen die ersten bernsteinfarbenen. Noch ca. 1-2 Wochen bis Ernte
Processing
Likes
10
Share
@PisBaked
Follow
Everything is looking amazing! All plants are at 4.5wks -5wks old now. Growth is extremely rapid. PPMS/PH of run off is less than what's going in! Still feeding to run off daily; vacuuming out the water everytime!! They're starting to need close to a gal. each :D I have defoliated & continue to pinch lower plant growth to lolly pop each branch -- I find this the best method hands down for autos.. The canopy for the most part is even with the exception of LSD-25, Fruit Punch, & most importantly; the one GSC (fast buds) -- it is a fucking monster as you can see (tallest plant by FAR). Cant wait to see the buds on what appears to be a Sativa dominate GSC pheno -- this plant was under the same 630w's worth of CMH along with the other GSC -- because it keeps growing, and was starting to developing light burn on leaves closer to the CMH's I've since switched spots with a GG#4 & it's now under two 600w LED's; growth continues to stretch on her, but I'm less concerned now that it's under less intense lighting, with a bigger distance from the lights . Other than that, things are looking to be on track for an epic harvest. Once buds start forming, I will drop the temps on the AC gradually to bring out the colors in GSC/LSD/Fruit Punch -- with lights/fans on full blast I can hold temps as low as 70f / 30% RH with the AC at less than 50% - Will be uploading more pics this weekend!
Likes
16
Share
Week 10 flushing plant this week and next week before harvest!! Fast Buds White Widow has been really easy to grow the plant is strong genetically and can handle some stress and recover if your a beginner I highly suggest you give this lady a try. She smells sweet, looks beautiful with her purple hues in her buds and the trichomes just glistening from every angle even the leaves remind you of fall as she's in her final stage. I hope this motivates and encourages others to grow their own medication!!!
Likes
Comments
Share
@Comfrey
Follow
Die Ernte ist zwar lange her, aber ich wollte das Album noch abschließen. Leckere Blüten.
Likes
3
Share
@RatmanJR
Follow
November 16th, 47 days post flip. Plants continue to fatten and have put on some really noticeable weight in the last week. By the looks of things I’m expecting around 10 more days of fattening and than a week or two of ripening before harvest. I will do my final defoliation around mid week this week. Shooting for day 49 or 50. At this point will not be providing anything but water. I still am not seeing any fade so I think she has plenty of what she needs. I did get a chance to add those two smaller fans I wanted to add. This has dropped my temperatures from 82 to 77. This drop should hopefully help preserve terpenes and help prevent mold. The airflow will also help prevent mold. Plant 1(Cherry Chunks): The frost on this one is insane. I also get why they call it cherry chunks, it’s terpenes profile is starting to come through and it is tart in nature; its structure is also very chunk like. Much lighter green compared to the two purple marmalades Plant 2(Purple Marmalade): The resin on this thing has been insane since the very start of flowering. Smells of tropical fruits and guava really looking forward to this one Plant 3(Purple Marmalade): Smells on this one are finally starting to take off, it slept for awhile as far as the smell department went. It is starting to take on a sweet gassy funk kind of smell. Possibly lavender and gas? I’ll have a better idea come next week. The density on these nugs are also insane, look like they are going to explode any second. Purple Marmalade Clones: Growing very well, needs a good defoliation here soon and maybe some craft blend. As always guys thank you so much for following along and God bless!
Likes
13
Share
@KirbyFarm
Follow
Started giving them plain water to flush before harvest. Buds look like they are still chunking up though. They have like a lemon smell too i was not expecting. Great strain for sure
Likes
4
Share
I didn't pay much attention to this grow - as I was mostly exhausted from all the previous autos harvests. So, to say I was pleasantly surprised would be an understatement - I'm still in total shock at the yield here. Trimming took about 4 hours almost non-stop :) Edit: 2nd plant harvested the next night - 396g (wet) :)
Likes
48
Share
i accidently bought some unbuffered coco and mixed it with my ussual earth, had major calmag problems in mid-flower but i´m still pleased with the results...also had a little trouble with mold at the end due to bad weather and high humidity in the final weeks of the grow, had to remove a few buds and harvest early @ day 55 of flower....but there's still alot of great looking buds left for me to enjoy and all look mostly done... Just harvested and hung them upside down, currently drying them at constant 19.5-20.5°C and 50-60% RH..will update as soon as they are dry
Likes
15
Share
Day 21 and the girls are really starting to take off.I did some LST on 3 of the 5 so far and will get the other 2 bent over in the next few days. Day 27 I watered with recharge tea and tied down some branches to get some more light into the center of the plants.I have increased the light intensity to 50 percent and slightly lowered the humidity this week.
Likes
2
Share
So das ist der letzte Beitrag zu den beiden. Es war für mich der erste Durchgang, der etwas Probleme bereitete, da meine cal/mag Werte nie wirklich stimmten aber das nie große Probleme bereitete, was ich aber schnell mit dem calmag von BioBizz wieder retten und somit eine schöne Ernte einfahren konnte. Mein Fazit zu den beiden: Special Kush: hat eindeutig größere Probleme bereitet als die Skunk, die ich aber wie gesagt wieder gut in den Griff bekommen habe. Optisch hat sie mir ehrlich gesagt im Zelt besser gefallen als die Skunk und ließ sich auch einfacher trainieren, da sie nicht so extrem geschossen ist in der Blüte. Ich muss ehrlich sagen an den Blüten finde ich leider Nix besonderes, sie sind zwar schön fest und glitzern aber Geruchstechnisch ist da nicht so viel los und das was ich rieche turnt mich jetzt nicht so an was auch daran liegen kann das sie sich gerade noch im curing befinden. Skunk XL: Eine sehr robuste Pflanze die gefühlt Nix braucht. Optisch fand ich sie erst langweilig ehrlich gesagt und so habe ich sie garnicht weiter beachtet aber natürlich genau so gepflegt wie die andere, aber da hat sich gezeigt die inneren Werte zählen, jetzt wo ich beide Blüten vergleiche merke ich das diese Pflanze viel viel mehr kann als gedacht und garnicht langweilig ist. Die Blüten haben so einen interessanten Skunk Geruch schon während des curings, sind von außen mit schönen vielen Orange-braunen Härchen überzogen und Stein hart, der Ertrag war auch sehr sehr gut. Also abschließend kann ich sagen der Durchgang hat mich gelehrt meine Wasserwerte noch mehr ans Optimum zu bringen und das der erste Eindruck einer Pflanze nicht viel aussagt manchmal merkt man erst nach der Ernte welches besser ist. 😂