Processing
Likes
Comments
Share
Busy week so Only a pic for the end of the week
Likes
44
Share
So far so good with this watermelon zkittles from barneys 😁 no issues and responding well to the topping and lst, I am making 3 litres worth of food for the week and will up it as the plant needs it. I will post more pics and a video later of the room. The purple lemonade and runtz are doing well, they look lost in there big pots 🤣. Pics to come. The orange sherbert are on day 3 of there 2 week flush with molasses and phed water, hopefully there fill out, on the plus side there getting purple on them now 😀. Marshydro tsl2000 is doing a amazing job and is really nice and cool, my hps light use to cook the plants this led is perfect can achieve good temps even cold temps to pull the colour out at the end 😀. The ac infinity with digital controller is a must have and a real game changer for a grower, I love it my mate loves his and trust me it helps, easy to use and set it up outside your grow area, dangle the thermometer cable at canopy hight and your good to go. Day 29 day 2 flower, the watermelon zkittles is starting to start her stretch I think she is going to be a nice plant, iv had no issues in the last 4 weeks and never have with the barneys seed selection.
Likes
16
Share
Well here we are, finally reaping the rewards of a successful grow. I think the nugs are denser than the mother plant had, but the yield was lower than expected considering the mom was 4oz. This strain can handle a lot of stress but it seems she burns pretty easy in flower from nutes.
Likes
Comments
Share
@Wardoggs
Follow
Defoliated the bottom 1/3rd of the plant to clear up some airflow
Likes
18
Share
my dry and cure style is this: 4 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 4 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. buds are one of the hardest as fucking rocks type of buds! very dense , compact , sticky , smelly , amazing at every aspect growing stage was 56 days and flowering stage was 75 days total (harvested tops at day 64th) the total weight of dry buds was : (plant #1 & #3 top buds 56 G + lower buds 22 G ) 78 G + (plant #2 top buds 47 G + lower buds 18 G ) 55 G + (plant #4 top buds 120 G + lower buds 67 G ) 187 G = 367 G
Likes
295
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 The girl is now ready, I've removed lot of leaves on this end week to prepare the harvest, I've discover nice long buds, but the bad news is mold on the biggest bud. Harvest tomorrow ✂️✂️ One watering with water 💧 Give water each 2/3 day 1.5 l Water PH @6 💡Mars Hydro - FC 3000 50% 48 cm. Mars Hydro Fan kit Setting 7 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Anesia Seeds - Deep Jealousy Auto🌲🌲 https://anesiaseeds.com/product/deep-jealousy-auto/
Processing
Likes
6
Share
Likes
2
Share
@TEKNOGROW
Follow
CONTEST TEKNOGROW BIG BUDDHA SEEDS BUDDHA TAHOE GROWER GIOVANNI
Likes
3
Share
@mjumbo
Follow
Week 10 / April 12 First week without adding 4or5 hours of light so they Start the flowering period. Make a defoliation so they prepare to grow the following days
Likes
11
Share
Hey hey! What’s up everyone pretty excited to start a new diary got a few new things going on so I’m pretty excited!! I germinated four purple lemonade seeds directly in the substrate and one in a Peatpod. The other plant in a Peapod is a bubble gum that I am giving to a friend. I made myself a 5 gallon bucket Deepwater culture system that I am growing the one plant in The Peatpod in. I am going to LST and trellis everything. I am running the cyco full like on both the hydro and soil plants but will only use grow xl on the soil plants. Pretty excited about this run can’t wait to update this in a few weeks! Take care and stay safe friends!
Likes
18
Share
@Ironblimp
Follow
I fed the plants 75% nutrients for it's very last feeding although 6 or more leaves are showing signs of nitrogen deficiency but the buds are still growing, all signs show that I think they need 2 more weeks. Most pistols are amber, and a few new pistols still grow from the tops or sides of each bud. New sugar leaf growth on the tops look more rounded. The trichomes on the oldest sugar leaves have turned amber, less so on middle and top. Trichomes on the buds range from appearing clear, cloudy and milky, but not amber. I want the trichomes on the buds to be anywhere between 10-30% amber.
Processing
Likes
5
Share
One of the 2 seeds the #1 pheno didn't make it to the surface after 72 hours, so I'm gonna have to replace it with another same strain seed which is the last one I got. Let's see how this baby girl of hard diesel #2 perfoms.
Likes
3
Share
Great for a novice, especially when it grows over 4 feet tall! Incredibly sweet, even still tasting it in my grinder days later.
Likes
410
Share
It's been 74 days of flower now and they only got another week left. A few of the girls were acting up so they were put into dark solitary confinement for 24 hours🤣🤣🤣🤣 bad girls... I have been flushing them for 2 weeks now. Almost there 🤘🤘. I'm very happy how they have turned out, the color, the smell, the crystals 👍. Very proud of what I created. One was chopped last week and is trimmed up and curing in jars now. Looks and smells good👍... The gals are still loving the new fc4800, TSW2000 and their new 8x8 mars hydro grow tent as much as I do👍 leaves are sticking straight up towards the light. Love how easy the zippers are to open and close. Nice and strong and guaranteed to last. It has extra material on the backside of the zipper that helps for light leaksand enough ports and vents for anything you need in it👍. the tsw2000 is still going strong and is also a very good light. Its been going almost nonstop for 6 months and still working the same as when I got it👍. not much heat off both lights but the fc4800 is alot cooler and the heat-sinks work extremely well. I have it daisy chained to the tsw2000 and 1 dimmer controls the other and i don't need to be reaching in too far to dim the other light, it's awesome and I can't wait to buy more lights to daisy 4 together👍. I would recommend this light to everyone that grows with leds and have trouble with temperatures getting too high. Even if you grow with HPS lights I think any mars hydro light is a MUST TRY. I like how heavy both lights are because I know it means they are built soild and strong 💪. Very good sign with the frost they are starting to get thanks to bith mars hydro lights. I can notice more frost under the fc4800 and I'm thinking it's from the UV DIODES they put on the fc4800 👍. 2 days ago they all smelt like my nuken, sweet marshmallows. But now I can smell the monkey dough and gorilla glue and skunk monkey coming through👍. I touched a bud on the gorilla and monkey fingers smelt like fruit loops👍 really pleasant smell. Lingered on my fingers for atleast 30 min. I'm glad mars hydro is under priced compared to some brands and for how popular they are. usually companies would charge more. Thanks mars you guys are awesome 🤘🥁🎸. I'm getting a new exhaust fan soon. An 8 inch that will work alot better than my 4 inch lol. Wayyy to small for a 8x8 Grow Tent. Dehumidifier is going almost non stop to try and get the humidity down. I love how both lights on 100% power only raise my temperature 2 or 3 degrees 👍. You can rest your hand on the lights and not much heat comes off them. Obviously there is some heat but for the brightness of the lights and only raising the temp that much is awesome 👌.  And if I wanted to I could remove the driver from the fc4800 and run it on the outside of my tent because the cord is so long but 2 or 3 degrees is barely nothing👍. The girls are starting to bulk up abit now and only 3 weeks of flowering, these lights are awesome 👌.  My last run of monkey dough and gorilla glue didn't start showing alot of crystals until week 4. These were only 2.5 weeks and I started noticing some frost. Next week I will be able to tell more about what these custom bred seeds will be like. I love how the smell is changing now. Didn't want all them to smell like nuken marshmallows lol. It's awesome that I can get right inside the tent to do any work i need👍. Even if I wanted an 4x8 tent. I'd rather this 8x8 because it's so easy to work with the plants and have so much room to move around and massive headroom when I'm in there chillin with the gals🤣🤘. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress2 Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
103
Share
3era semana. El efecto de "Amazonia" se ve reflejado en las hojas hacía arriba adorando al sol. Se la ve linda y creciendo con fuerza. Al menos 0.5cm por día. Finalizando el día 19 de su crecimiento le hice una poda apical. Por su estructura sativa y mí poco espacio decidí hacer topping y poner hacer un guiado con lst para luego poner la malla de scrog. Día 21 me olvidé de regar y se achicharraron las dos primeras hojas por deshidratación. Después de regar se la ve linda y feliz.
Likes
9
Share
Day 81, gonna call it day 32 flower. Some sweet, sweet terps are coming through! Buds are swelling. The anticipation is great with this strain
Likes
1
Share
Likes
11
Share
@TOTEM
Follow
Unfortunately my digital timer was defective and made the flowering phase delay by 2 weeks. From one side, this delay allowed them to stretch a bit more. On the other side, it made me start giving bloom nuts with bad timing, thinking the bloom phase was already started. In other words, I gave bloom nuts in the last 2 weeks of veg. This means I’ll have to give them “week 3” bloom nuts for two more weeks, maybe reducing by 50% the B-52 and Big Bud dosages (they could be a little too much). Let’s now talk about the lady: well, she’s growing like a monster: 73cm!!!! She is the biggest of the grow room. She’s been growing 7-8 cm every day in the last days. That’s impressive! Woohoo, I love sativassssss! They will make you feel like a king, and they will be your queens 👸 By the way, sativas are WILD, and they make you sweat before showing their pistils. That’s what’s happening now. As well as the two Euphoria, they’ve not shown anything but a small pre-flower (not even a pistil for the moment). We’ll see in the next days. In the meantime, enjoy the photos and the video at the end! Cheers buds 👊
Likes
15
Share
I had such a good response applying raw aloe very gel to the silver haze, just look at this weeks pics compared to last weeks. You can clearly see the difference. Aloe is high in beneficial enzymes and growth factors and more importantly an excellent source of silica. Cannabis flower, specifically the trichomes are made up of between 78% and up to 86% silica depending on the cultivar, so far only a small number of cultivars have been tested. However its clear that cannabis flowers NEED silica. Silica will also help with drought tolerance, it will armour your plant against pests, it will help the plant with transpiration, it will make water transport much easier for the plant, freeing up energy for other things like flower production. Also, If used as a foliar spray once a week in veg, it will help tighten up node spacing. So if you want those frosty buds make sure you have silica readily available for your plants.