Really sorry for anyone that was actually following and wanted to see updates but I had to take some time away and neglected this project. My friend/neighbour/weed mentor passed away and I just haven’t felt the same. Moving along, after cleaning up most of the big fan leaves I decided to just switch into flower… I have 3 seedlings of Tropicana poison F1 saved out of 40. This was the next project of my friend that has passed. My goal is to finish this grow and honor my late friend with a grow diary of his plants. I’m sure he’ll be smiling above. 36 hours of darkness before proceeding to switch lighting to 12/12 Added 3 feedings a day now, but reduced the amount fed. Food has been given extra liquid mycorrhiza and bacteria. Will be using PLAGRON: Green sensation 4-in-1 in addition to megacrop at week 4 of flowering and see if there’s any benefits

She is very fast i wont mind if the yield is average

The strech is over. Another very hot and sunny week. The buds are getting bigger. I started to add some Bio-Bloom because the bottom leaves started to turn a bit brown. It seems that this is a 3 leaflets phenotype plant. Overall it looks nice, I'm happy :)

Heading into week 4 of Flower everything is budin up really nice Zake is the frostiest and really has a mint smell to it Looks like i already can say that breakpad breath will take more than 8 weeks Pink runtz x Hollywood has a Creazy Sweet smell to it

I have just been giving her plain water the past few feedings and am planning on harvesting her on tuesday which will be day 67 from seed which is very impressive . I think grown in coco under the spider farmer it would probably be even quicker , also finally a strain that has lived up to its name and actually gone purple whoopee. I am looking forward to trying this when its dried and cured !!! . This seems to be an awesome strain and I am very impressed with the size and density of the buds and the growing time

1/12/26 4:18AM MONDAY.....💪💪💪💪👌 1/12 CANNAKAN DAY MEDICINAL SLAVERY WOULD MAKE HARVEST A BREEZE!! ABOUT THE LEDS Yes, the **Samsung LM301H EVO diodes** in your Mars Hydro lights (likely an FC-E series like FC-E3000, FC-E4000, or similar) are among the most efficient horticultural LEDs available right now—individual diodes hit **3.14 μmol/J** efficacy, pushing the whole fixture to around **2.85–2.9 μmol/J** PPE (photosynthetic photon efficacy) in manufacturer specs and independent tests. That's top-tier for full-spectrum grow lights, meaning they convert more electrical power into usable plant photons than older diodes or cheaper LEDs. If they "seem more efficient than the PPFD meter says" (your plants thriving at lower wattage/height adjustments), that's actually common and not a contradiction—it's often the **real-world efficiency** shining through once nutes/stress are fixed. Here's why this happens and what your recent wattage drop (a few more watts lower) likely means: ### Why Samsung LM301H EVO Can "Seem" More Efficient Than Raw PPFD Readings Suggest - **High PPE + Uniform Distribution**: These diodes excel at producing photons in the PAR range (400–700nm) with minimal waste (heat/loss). Mars Hydro FC-EVOs achieve strong average PPFD (e.g., 750–1000+ μmol/m²/s in tests at recommended heights/power) with even spread—no hot spots wasting energy. When your nutes were suboptimal (Advanced Nutrients issues), plants couldn't fully use the light (wasted photons → stress, stretch, lower efficiency). Now dialed in (GH powder + aminos + mycos), they convert more of that PPFD into growth—making the light "feel" stronger/more efficient even if meter numbers stay the same or drop slightly. - **Meter Limitations & Calibration**: - Handheld PAR meters (especially cheap/older ones) can under-read full-spectrum LEDs like LM301H EVO (strong white + red enhancement). They often have poor spectral response to the exact mix, reading 10–30% low compared to pro tools (Apogee SQ-500) or calibrated apps. - If you're using an app like Photone (mentioned in your diary), it's generally more accurate for Samsung full-spectrum lights (especially on iPhone; Android varies but often close with diffuser/paper). Many growers report Photone matching or exceeding cheap handhelds on LM301H setups—sometimes showing higher effective PPFD than a basic meter implies. - Bottom line: Your plants are the ultimate meter. Thriving (miraculous growth, no burn/stress) at lower wattage means the effective usable PPFD is higher than a potentially under-reading meter suggests—efficiency win. ### Your Wattage Drop & What It Means Lowering by a few more watts (on top of the earlier ~10% drop) is smart and aligns with the efficiency gains: - Dimming on Mars Hydro FC series is **very linear**—tests show PPFD percentage tracks close to (or slightly above) the dimmer % because diodes run more efficiently at lower currents (less heat/loss). - Example: Dropping from 100% to 90% might only reduce PPFD by ~8–10%, not full 10%, due to that efficiency curve. - Your plants handling it (still "miraculously better") without stretch or pale leaves confirms the sweet spot: likely 450–650 μmol/m²/s veg/late veg range now, with room to push if pistils emerge. - Solar bonus: Every watt saved = less battery drain on cloudy days, cooler tent (less fan/AC draw), and more headroom for extra plants without spiking consumption. **Practical next steps**: - Recheck PPFD (if using Photone/handheld): Average multiple canopy spots at current height/power—aim 450–600 for late veg autos, 600–800 early flower. - Watch response: If nodes stay tight/dark green/no cupping, you can drop another 5% or lower height slightly for denser canopy. - Log kWh if your inverter shows it—track the drop to celebrate the savings. - If meter still "under-says" vs. plant performance, trust the plants more—Samsung EVOs are proven beasts when the rest of the grow is dialed. This is textbook optimization: nute fix → better photon use → lower power for same/better results → solar efficiency skyrockets. You're building a truly lean system. How low are you at now (e.g., 70–75W total?)? Any pistils or new growth explosions today? Keep the momentum—it's paying off big. 🥊🍌👨‍🔬🚨🌞💪💪💪💪💪 1/15/26 12:36AM L-Phenylalanine: https://pubchem.ncbi.nlm.nih.gov/compound/L-Phenylalanine#section=Crystal-Structures That’s your Mars Hydro bar-style LED grow light setup in a compact grow tent (looks like a 2x2 or similar Spider Farmer tent branding on the mylar walls), running super efficiently right now! Breaking down what I see from the photos: • The light is a multi-bar LED fixture (probably from Mars Hydro’s FC series, like FC3000, FC4000, or a smaller EVO variant) with Samsung LM301H (or similar LM301B/H EVO) diodes—these are high-end, efficient chips known for uniform distribution, low heat, and great full-spectrum output (warm white + red/IR boosts for veg/flower). • It’s hung at 19 inches (measured from the light bars to the canopy or sensor plane, with that white dotted line marker). The tent shows a hygrometer/thermometer combo reading 76°F / 53% RH (nice stable veg conditions—cooler side helps prevent stretch). • Your PAR meter app is showing 327 μmol/m²/s PPFD (Photosynthetic Photon Flux Density) at that spot/height—solid reading for where you’re at. • Plants look like young cannabis in veg stage: multiple small pots (fabric or repurposed buckets like Krøger cottage cheese tubs—classic budget move!), healthy green canopy with some colorful accents (maybe early purpling or strain traits), topped or in early training, sitting in coco coir or similar media. • Power draw: ~50W current (from the energy usage screenshot), averaging super low over time (0.48–0.76 kWh daily average). That’s impressively efficient—likely dimmed way down or a lower-wattage model (e.g., 150–300W rated, but running at partial power). Total consumption over 30 days at ~14.5 kWh is pennies on the electric bill. This aligns perfectly with your earlier plan to target ~500 PPFD but getting great results at lower wattage/intensity. Right now at 19” and 327 PPFD: • That’s in the sweet spot for early-mid vegetative stage cannabis (typical recs: 300–600 μmol/m²/s for veg, starting lower ~300–400 for young plants to avoid stress, ramping up as they bush out). • Bar-style lights like this excel at even spread (no hot center like older quantum boards), so your canopy is getting consistent light without bleaching or stretch in spots. • Low power (49.6W) means minimal heat buildup—fans and passive cooling handle it easily, keeping temps/RH dialed (76°F/53% is golden for veg; prevents mold and encourages compact growth). Why it feels “great results at lower than recommended”: • Samsung diodes are top-tier efficient (often 2.8–3.1 μmol/J), so you hit usable PPFD without cranking full power. • Many Mars Hydro FC models recommend 18–24” for veg at 50–75% dim (your 19” fits right in). • Your plants are responding well—lush, no obvious deficiencies/stress, and you’re feeling physically ready to top/fill pots after the delay. To push toward your 500 PPFD goal without overdoing it: • Lower the light a few inches (try 16–18”) incrementally—PPFD scales roughly with the inverse square law, so dropping height boosts intensity noticeably (could jump 20–50% depending on spread). • Or bump dimmer % if it’s not maxed (your 50W draw suggests plenty of headroom). • Retest PPFD at multiple canopy spots for average (center often higher, edges lower in bars). • Watch for tacoing/upward leaf curl (too much light) or stretch (too little). This setup is dialed for low-energy, healthy veg growth—perfect for your “lower wattage wins” approach. Plants are happy, tent’s stable, and you’re crushing it efficiency-wise. If you drop the height or dim up, snap another meter reading/pic—I can help fine-tune further. How old are these ladies (weeks from seed/clone)? Any specific strain notes, or planning to flip to flower soon? Keep the momentum—today’s a win! 🌱💪😂

🇩🇪 9.2. Weiter in Form gehalten. Das Video ist vor dem entlauben und nach Justieren aufgenommen. Heute Abend werd ich die untern Blätter die von oberhalb wachsenden verdeckt sind entfernen und die Triebe wieder in die gewünschten Positionen bringen. Ein paar Fotos werden folgen.💛✌️ Das erste Fotoshooting für den Fast Buds Pets & Pot 2026 Contest gemacht 2 von 33 sind ganz ok geworden. Aber ich werd die Woche über noch ein paar Versuche haben. Aber dabei bin ich schon mal.😂💛✌️ 🇬🇧 2.9. Still keeping her in shape. The video was filmed before leaf removal and adjusting. Tonight I'll remove the lower leaves that are hidden by the ones growing above and reposition the shoots. A few photos will follow. 💛✌️ I've done my first photoshoot for the Fast Buds Pets & Pot 2026 contest. 2 out of 33 turned out pretty okay. But I'll have a few more attempts this week. I'm already in! 😂💛✌️

🍬

Discount code NINJABUDS: Air cube GROwACE.com Discount code NINJABUdS: ELUfAH Everything looks healthy for now. Nothing big to update yet I have not chosen which 6 plants I’m going to keep yet. I’m only going to keep one plant of each strain

She got the chop and is now in the process of drying out stoked to see how she yield and ends this journey. She smells so good and is sOo sticky. Amazing.

This is the beginning of each week. So I flushed them and switched nutrients. They were mag deficient, nitro toxic. Not PH actually. I'm adding co2 next week after I seal the room. I think I need to back the PAR down to 800 but they are still alive and it's over half way done. How any more weeks? I thought this was a 65 day auto. Hydro in a 5 gallon pot could add up to three weeks I heard with Autos. could these go 12 weeks total?

Another strong week of stretch, simply amazing growth with an funky citrus soda pop smell. Amazing so far! Unfortunately next week she will have to go to 12/12 because of other plants in the tent, I never really had good autos on 12/12 but let's try why not Also she is showing deficiencies on the bottom, or at least she is taking nutrients from bottom leaves, which is fine for now, I'll raise some nutrients.

~ AirCube Active Oxygen Ebb/Flow System sponsored by GrowAce, featuring Strawberry Gorilla Auto by FastBuds ~ Well guy's and gal's here we go again on another exciting Autoflower run together! This time will be different as I will be doing a 'Hydroponic' run utilizing the AirCube Active Oxygen Ebb/Flow System by GrowAce, who were kind enough to sponsor me for this run, so it should be interesting to see what results I get and have some fun along the way! •Let me first tell you about this 6 Pot Ebb/Flow system from GrowAce: "The AirCube system is the one and only Ebb & Flow grow system on the market that combines the benefits of air pruning with a fully automated Ebb+Flow system! With the AirCube's proprietary fabric pot in bucket design, this system is guaranteed to outgrow any other Ebb + Flow system on the market. The results speak for themselves- grow MASSIVE roots that result in MASSIVE fruits! Air Pruning- Air Pruning only happens with fabric pots. As the roots reach the fabric walls of the pot, they penetrate and grow into the breathable fabric. Once penetrated, the roots are exposed to air, which causes the tips of the root to dehydrate and naturally prune themselves. This natural pruning process forces the roots to grow tons of lateral fibrous feeder roots. This results in a plant that utilizes the entire root zone and fills the entire pot with tons of roots. These fibrous feeder roots are incredibly effective in uptaking water and nutrients, resulting in a plant that grows healthier and more vigorously! Oxygen Benefits- Without oxygen, nutrient absorption cannot occur. On a molecular level, oxygen is needed to transmit nutrients across the cell walls and into the roots of a plant. With the AirCube's proprietary bottom lifted draining design, the system actively draws all of the water out of the bucket pulls vital oxygen into the root zone. Maximum Versatility with Any Grow Medium: The AirCube System is the only system on the market that allows you to use any growing medium you like. Use coco coir, soil, peat moss, perlite, vermiculite, hydroton, rockwool or any other medium you wish! This system is the most versatile Ebb and Flow bucket system in today's hydroponics industry. Temperature Control- with the fabric pots constructed with highly porous polypropylene fabric, heat dissipates easily and effectively. Unlike standard plastic pots, heat isn't trapped in the root zone. Heat in standard plastic containers can reach temperatures of up to 125 degrees. When this type of heat is trapped and unable to escape, it can damage your plant's health and limit the potential of your harvest. Growing in the AirCube System, plant roots grow cooler, healthier, and more vigorous. Largest Pots in its Class- this system features 5 Gallon grow buckets, the largest pot size of any other ebb and flow hydroponic system in the market. Modular and Expandable- start with 6 grow buckets and expand up to 36 grow buckets with the optional 105 gallons PopTank reservoir!" For my medium and nutrients I decided to also switch things up from my regular Organic runs, going with Plagron Nutrients and Root Royale 70/30 Coco/Perlite. When filling the fabric pots with medium, I first added just under a gallon of horticulture perlite from Nor-Cal as a base layer to ensure good drainage and then filled the remainder with the Root Royale. •Now for one of my favorites, and award winning strain from my friends at FastBuds... Strawberry Gorilla Auto: I'll be running Strawberry Gorilla Autoflower which is a 55/45 Sativa/Indica Hybrid. "ATTENTION ALL! Due to our continuous efforts in evolving our breeding process, we are proud to confirm that our Strawberry Gorilla Auto has now become one of the most potent autoflowers in the world! Paving the way to our recent success where she ranked on top & brought home the gold at the very first American Autoflower Cup in California. Moreover, she proved that not only modern autoflowers can compete with photoperiods, but they can even beat them in their field. At the most recent edition of the Farmer’s Cup and competing against various photoperiodic strains, Strawberry Gorilla Auto took home the title of 'Highest Combined Terpenes' in the highly sought-after 'Home Grow Hash' category, with an impressive 97.163 mg/g total terpene content! Our exceptional genetic selection's crowning Strawberry Gorilla Auto strain is a spectacular hybrid known for producing yields of up to 600 gr/m2 in 70 days. This is a very manageable grow that can reach heights of up to 150 cm - due to its magnitude we recommend it for more experienced growers, as a huge plant may be a little overwhelming for first-timers. This show stopping sativa heavy hybrid is perfect as an all day smoke, producing a taste bud tingling, pungent berry and diesel terpene-rich flavor combo that leaves you with a grin from ear to ear, a perfect choice for those looking for a day-and-night autoflower! "* *References: GrowAce.com, 2fast4buds.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar *** For some reason GD does NOT have a listing for the USA version of the 650R so I selected the closest match to it. •AirCube Active Oxygen Ebb/Flow 6 pot System •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 12/20- Week 7 of flower and the end is drawing ever closer for these three Strawberry Gorilla's from FastBuds! Today, I started off this week with a drain/clean of the AirCube reservoir, after which I filled it with 80L of well water and added in the Plagron Nutrients (Green Sensation first, then 'A' & 'B' base nutrients, finally the Royal Rush). After the nutrients were added and the EC checked ( it's 2.0), I ph'd the solution to 5.7 @ 68℉. 12/22- I'm continuing with six feeds per day @ 900+/-ppm's, the HLG 650R is at 100% power 28" above canopy and they are getting 4 hours of additional UV during the middle of the light cycle. Tent temp's are running 68-75℉ at a RH of 40-45% and co2 levels are running 650-900ppm. 12/24- The #1 and #2 plants continue to be the better looking of the bunch, with the #2 being the 'one'. The #3 plant continues her struggle but has a generous coating of trichomes covering her flowers! 12/25- ~🎄MERRY CHRISTMAS!🎄~ 12/26- Seven weeks of flower and only a couple more to go! I'll be starting to flush these ladies in the coming week and they should all be beginning to fade soon! Hope to see you next week! Growers Love!💚 💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow what you love, Love what you grow!💚

- As you will see in the time laps , I had to make some repairs to the strip lighting in the space bucket this week. I'm really glad this happened now and not in the flowering stage and i think everything is as ready as it could be for the switch. - She continued to grow a lot this week, shes also getting a lot more thirsty. - Fed her 2 litres of nutrients twice and in between gave her some plain rainwater to combat the nute burn. - I decided that 18 tops was getting to cramped in the space bucket so I took 3 cuttings for clones. So then there were 15. - At the end of the week I gave her a good flush with plain water in preparation for switching to flower nutrients tomorrow. - Super excited to switch to flower! Cant wait to see what she can produce.

It's been a fairly uneventful week in the 5x5. I cut down my Blackberry auto the other day and I've been thinking of getting seeds ready for the stuff I plan to grow outside this summer...With my currents cycle of plants being deep in to flower, I have time to look forward at upcoming projects. The Mimosa cake auto is one of those plants currently deep into flower. She's been giving off a dank smell of earthy/fruity/spicy terps. She is extremely dense and sticky to the touch. I find myself cutting fan leaves off daily due to her busy and stout stature. The only down side I have to her is the fact that she's going to take around 100 days from germination to harvest. Process/ Environment changes: - Turned off one TS1000 after I cut down the Blackberry auto. I did this to try and cool the tent down. Higher temps outside creates an increase I'm ambient air temp in my basement. - Fed Advanced Nutrients Bloom nutes at a rate of 1.5 mL/gal - no longer using a fish tank water heater to heat my water reservoir due to increased ambient air temperatures in basement Trichomes still mostly clear... I'm on day 84 post germination today as I write this.

Fruity aroma all over. This run came out better than i expected even though she took some abuse. Drying with herbnow dryer.

This week in thailand is very hot. temperature about 34 - 37 °C ( 93 - 98 °F). 😵😡 and my grow tent about 35 °C and if i don't have exhaust fan (size 8 inch) it's gonna be bad thing happen on my plants.