They are looking real good. I think I may have gotten some nutrients on one plants leaves and it caused some yellowing and leaf curl, I’m hoping it straightens out.

Hi everyone :-) This week the buds developed super ;-) All are beautiful 😍. Super genetics 👍. Blue Cheese pheno 1 is slowly coming to an end :-) This week I will start to use up the remaining nutrients and harvest in 10-14 days ;-) Everyone else needs something else :-) have fun with the videos, stay healthy 🙏🏻 and let it grow 🌱

26/01dernière frostbanger jour - 6 récolte 27/01 1,5 litres d'eau PH 6,3

Not much change, just growth. Giving them all one more week to gain strength, then will flip to flower next Friday.

04/09 - Started minor defoliation. Shes getting too bushy and blocking bud sites and causing moisture spots. Will remove a couple of leaves every other day for the next week. 05/09 - Full res change. Realised I mucked up the ratio. Went 35ml Micro, 25ml grow, (Shouldve been the other way around, so added an extra 10ml grow), 15ml Bloom and 15ml Silica. EC 1.4, PH 5.7. Will keep an eye on her and add some additional grow if she does alright. 06/09 - Minor defoliation. Removed about 12 leaves total so far. LST to spread the canopy a little more. PH stable at 5.8, EC at 1.4, Water level dropping. Seems to be stretching and pistils have begun to form! Responding well to the uptick in nutes from the res change. 07/09 - Leaf tucking, LST and took a leaf or two. Shes getting her stretch on for sure. PH stable at 5.8, EC stable at 1.4. Water level still dropping. 09/09 - After much deliberation, I ended up going for a fairly heavy defoliation session and am now going to leave her the hell alone until at least mid flower. I removed a large chunk of shaded leaves and bud sites and effectively ended up lollipopping her. I also removed all the old LST, and added a couple to pull leaves out of the way. The canopy remains largely unchanged, but shes much more airy now, and Im seeing far fewer damp spots where leaf perspiration has occured. Now to see if I can keep my hands off for a few weeks!

Hey what’s up fellow growers I made a mistake and deleted my dairy for these clones so I just put em all in one This is week 6-8 since I had these clones All pictures is from beginning to recent I’m growing four different strains Sherbertlato , Peanbutter Breath x Cookies , Wedding Cake , & Gorilla Cookies I have them in a 4x4 diy tent under a 1200w Aglex LED & a 600w FSg tek LED budget light I only water ph at 6.6 with cal-mag since I received them I’ve transplanted twice from solo cups to 1 gallon to 5 gallon grow bags inside of a mixture of fox farm ocean forest and roots organics 707 soil I still have the wedding cake and sherbetlato in 1 gallon grow bags til they grow taller then their going in 5 gallon before flower Today is April 5th I just watered and cut some clones then placed them under an diy scrog net Once the cuttings roots I’m going to flip the Gorilla Cookies and Peanutbutter Breath x Cookies into flower I must say although this is my first grow I think I’m doing an okay job with these clones a lot better than I did with my auto flower grow I learned to watch and time my watering and feeding and I’m still learning a grower I know where I got my clones said I’m catching on fast tho n keeping my environment clean and air good not getting any bugs specially without any expensive equipment So stay tuned Im only getting better specially with the advise and techniques

Week 3 of veg. In the books and they’re all motoring along nicely. The Alaskan Thunderfuck looks to be sorting itself out so we should have 4 plants for the chopping eventually. Just gotta get em there first. They’re showing no adverse reactions to the heavier nute feed at this stage of development which is yet another feather in the cap for Druid Berkana. I’m immensely impressed with this nute line. Just another boring week of veg. In the books. Can’t wait to see transition take over👍. Background Just a fem run we were able to sneak in to the dutchy cabinet for some extra bud stock. Strain details as follows: QCS: this actually a strain of Alaskan Thunderfuck (Not AK47 as advertised). GD doesn’t have that info up yet. We’ve had it before but never grown it. I remember it being a decent and somewhat sedative indica. Blimburn: This chocolopez strain is very interesting. We’ve been waiting at least 5 years to grow something reminiscent of a chocolate Thai. This one should fit the bill there nicely. AMS: Their Borderliner strain caught my eye so we naturally had to… give it try! No matter how it turns out, this seed co. Has been nothing short of stellar to work with. We’ve got a whole bunch more of their stuff in the hopper for testing on the next cycle🤟. Smiling Tiger: This is an S1 of my buddies cross called Holy Surfer. Still haven’t seen it bud out in pollinated yet but the structure is classic skunk with a big primary cola, tight node spacing and exceptionally vigorous leaf production. The smoke should be interesting and the terp profile is very pungent and sweet.

Starting to smell very Nice the purple haze looks beautiful really nice to see different bud shapes between different strains

Will be flipping to flower here in 2 weeks or so..

I have harvested my ladies. The buds are nice and thick. I'll definitly do an update on the drying and curing. I have already done some rough wet trimming. I am planning to do some more once it has dried They are now drying in my garage with a dehumidifier.

Am Anfang der 13. Woche wurde geerntet. Kein Schimmel, keine Insektenplage. Ein Grow wie aus dem Bilderbuch. Props an Fastbuds, toller Strain! Ebenfalls der erste Grow mit Living Soil. Absolute Empfehlung.Für alle die es interessiert: Pro 10l Erde: Lightmix oder alte Erde 10l Urgesteinsmehl 50g Mycorrhyza Granulat 200g Kokoserde 1,5l Hühnermistpellets 150g Bims 0,5l Wurmhumus 0,5l Dolomitkalk 20g Zusätzlich kamen in 40l rund 10 Kompostwürmer, die den Boden schön locker halten und massiv - bei all meinen Pflanzengrows - zu gutem Wachstum beitragen und diese gefühlt deutlich resistenter machen - vorsicht: Bro-Science! Diese füttert man mit Komposttee, Stroh als Mulch und allen Blättern, die ihr der Pflanze entnehmt - kleingeschnitten. Füttert ihr die nicht, nagen die an den Wurzeln. Aber keine Angst - Stroh allein reicht im Regelfall. Die Pflanze bekam über den kompletten Grow zwei Komposttees aus Wurmhumus, das wars. Wie man sieht, fühlen sich die Tiere pudelwohl - die Honigmelone steht bereits im selben Topf - mal gucken, wie die das findet. Die Buds sind wie zu erwarten fluffig und etwas foxtailig. Das lässt sich im Gewächshaus bei dauerhaft irre heißen Temperaturen nicht vermeiden. Die Innenbuds sind trotzdem schön fest. Bin wirklich zufrieden- kam ordentlich was bei rum. Hängen jetzt bei 18 Grad im Keller im Netz. Und habe ich schon gesagt, dass die KEINERLEI !!! Schimmel hatte? Im Norden Deutschlands? Und das das keine Noternte war, sondern eine fertige Auto? Ich freue mich schon aufs nächste Jahr… vielleicht ne Apple Strudel von Fastbuds? (Falls ihr das liest: meldet euch 🤙😉😂) Ne, Spaß beiseite. Wirklich toller Strain! Stay tuned für weitere Fotos der fertigen Buds :-)

Stacking wonderfully. Starting to fade a bit. Candy Bubatz supposed to take 9-10 weeks but not there yet. Very sticky. Harvest coming soon. My 1st grow is coming to an end. Hopefully I make it

I started to flush the cookies gelato and Royal Bluematic 1. They look good and I can't wait anymore, they smell so good and are so sticky too. I have cut the yellow and burnt leaves. I think i will cut them soon and harvest in less than a week. The HulkBerry 2 follow 2 weeks late on the others or something like that, and my royal Bluematic 2 is still very strange, but is making quite a lot of small buds, very weak but look to be growing.

I’m to busy to write a paragraph sorry

Day 57. Statement : Even with hard beginning - thats my best run ! Zamnesia is AMAZING !!! With veg hiccups, they still bushout to really nice plants in less than 7 weeks. Now Blue Dream is targeting my roof, Kalini Asias are thick as f@ck. Runtz very dense plants, thought they would be a bit bigger ... They drink every 36 hours, hard to keep up with work, but i do my best not to screw up with them ;) This week : feed, water, water. Defoliation too !!! Day 59. That game - "who will reach sealings" - I don't like !!!! Moved lights two days ago ... Soon i will need axe for my roof !!! ;)) That Monster Blue Dream is insane !!! Hope will do heavy defoliation in two days, maybe this will shock her ;))) other plants keep up with her and canopy is even without all three Blue Dreams. Huge plants. Day 60. Video is showing how less space is left, but they just keep climbing !!! ;)) Day 61. Thinking to defoliate all girls tonight, but maybe i will do it after next watering. Had to reposition them, loads of branches need to be chopped, some didn't see light for last two weeks( Curly, looks like sh$t, will never reach light). Girls are too big for my setup and i really hope it will be enough light and HEIGHT for them... And so Defoliation has started !!! Hope everything will go fine !!! All done !! With the thought " WHAT HAVE I DONE !!!!??????!!!!!" i go to try to fall asleep ;))) Happy Growing !!!

https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND THEY WILL REACH FOR THE STARS WITH MARS🤘🤣. So it's been almost a week under the new MARS HYDRO FC4800 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. I think it might be the blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I've owned a gorilla grow tent before and MARS HYDRO TENTS are better. Don't waste the money on a gorilla tent, get a mars and save a couple hundred bucks for your fertilizers and soils👍🤜🤛I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll @marshydropenny Happy growing to all my friends 🤜🤛

Don’t want to scrog I’m hoping weeks 2-3 with rhino skin will give more confident stalks. I have bamboo stakes ready as a back up

27/05 - Day 1 of Veg(1L of Nutrients dissolved in water poured into the tray) 1/06 - Day 6 added toothpick to help give support 2/06 - Day 7 checked on their root development, so I can transplant (Tomorrow we transplant)

Una cepa de fácil crecimiento y resistente al ataque de bichos, humedad alta y climas cambiantes, aunque la cosecha no fue muy abundante debido a su estructura compacta, sería bueno aplicar alguna técnica de crecimiento para obtener más cosecha, una fácil y rica planta medicinal