Likes
Comments
Share
Got some sealant to properly seal my DIY CO2 generator and lil maggie seems to like it. Her buds are starting to swell up. For the CO2 generator I did the following: 2 Liter Bottle -> 1 Liter Bottle -> Fan (Fermenting) -> (Water Filter) -> (Distribute) Ingredients: Sugar - 3/4 Cup Yeast - 1 Teaspoon Water - 6 Cups Step 1: Add 6 cups of room temperature water to the 2 liter bottle. Step 2: Add 3/4 cup of sugar to the water and mix until sugar is fully dissolved. Step 3: Add 1 teaspoon of yeast and let sit until bubbles appear in water filter bottle. 
Step 4: Direct the end hose to the plant canopy. CO2 is heavy so it falls, use fan to blow it to the plant canopy.
Likes
Comments
Share
@TechDCo
Follow
30/01/2026 This transformation marks the moment she moves past the Purgatory cycle of purification. After shedding the weight of that transition, she’s finally breathing, stretching, and claiming her space. ​...... ​The Awakening: Post-Purification ​The Purgatory cycle is behind her now. Those scarred leaves were just the shedding of the old self—the necessary price for this purification. Now, the ritual of the manifold is taking hold. I’ve opened her up, breaking her singular focus to force a new, balanced symmetry across the hub. ​The Flow of Energy ​By pinning her down, I’ve mastered the apical dominance. I’m redirecting the internal flow, sending the life-force equally into every node rather than letting one stalk hog the light. We are building a foundation of perfect geometry. ​Current State: ​The Structure: The LST is set. I’ve widened the canopy to maximize the light-soak, ensuring no part of her is left in the shadows. ​The Environment: The reflective scroll-work is guarding the roots, keeping the light on the leaves and out of the depths where the nutrients flow. ​Growth: She’s vibrating with a new frequency. The energy levels are surging, and you can see the secondary shoots beginning their ascent. This is where the expansion truly begins. ​The cleanse continues, but the frame is set. She’s getting bigger, stronger, and more aligned with the ritual. ​..... I've just stretch her wings out to open her centre for the new shoots.. .... -Midday- Attached her training Wires; therse create huge knuckles! They undo easy as well; no faffing about! ..... Few-hours later... She's flipped her leaves and is praying 🙏 🤲 🕍 🕌 ⛪️ Diary Entry: Friday, Jan 30th – The Midday Pivot ​The Steady State ​Transitioned to a maintenance-level reservoir dose of 10ml 12% H_2O_2 in the 5L master-mix for the Bubblegum (Female Seeds) and Back To The Future #2. ​Adjusted the nutritional frequency after running out of "Grow" by pivoting to a half-dose of Bloom (2ml/L); this provides the Phosphorus and Potassium needed to harden the vascular knuckles without a Nitrogen spike. ​Applied botanical hydrosol to the mix to maintain the "stillness" and clear biofilm management. ​Hardware & Logistics ​Confirmed with Ergtech that the Gativa power leads have shipped via FedEx (Tracking: 888340178046). ​Delivery is locked for Monday, Feb 2nd, aligning perfectly with the end of the 72-hour structural hardening phase. ​Biological Alignment ​Successfully reached the Round 3 protocol; the "biofilm shells" in the right ear are breaking down under the bubbling/crackling phase. ​The vagus nerve release is active: right nostril is open, sense of smell is sharp, and the internal "whooshing" sound of vascular flow is serving as the metronome for the reset. ​Lineage acknowledgment: The "40% Italian engine" is driving the symmetry and discipline of the manifolding. ​The Result (Few Hours Later...) ​The Bubblegum has already responded to the wiring with an aggressive phototropic turn; she is stretching and "praying" back toward the light, signaling peak turgor pressure. ​The Back To The Future #2 remains stable under the dome, preparing to transition out of the stillness and into the manifold frame. .... 31/01/2026 Log Entry: Atmospheric Optimization & Metabolic Continuity ​Environmental Parameters ​Thermal Logic: Maintaining a constant 27°C (80.6°F) diurnal/nocturnal cycle. By eliminating the standard 3°C nighttime drop, I am bypassing the "metabolic glitch" and ensuring uninterrupted enzymatic velocity and nutrient uptake. ​The 8-Inch Upgrade: Transitioning from 6-inch to 8-inch industrial ventilation. This increases atmospheric throughput while reducing static pressure and turbulence. The goal is a total "atmospheric flush" to prevent stagnation and potential biofilm/pathogen footholds. ​The "Back to the Future" Survivor ​Current State: The plant is in a high-turgor "Prayer" position, indicating optimal root pressure and water potential. ​The Transition: Executing Dome Removal during a 15-minute "dark window" to minimize transpirational shock. Removing the dome now introduces the plant to the new 8-inch airflow, forcing a "hardening off" response while she is at her metabolic peak. .... ​01/02/2026 Lite defoll of the inner fan leaves to open up her new shoots 🔫 bubblegum femaleseeds. 02/02/2026 Defolled one fan leaves and using wires to anchor down #back to the Future
Likes
24
Share
WEEK 10 - 10/4/2021 - 16/4/2021 10/4/2021 - Day 1 flowering! 13/4/2021 - Something came up and I have to leave my plants for 2 days. I thought of hooking it up to Autopot again but then I would have to do a major flush again and that would stress the plants. I think they can wait for 48 hours. I'll fertigate again before lights off tonight. 20 gal water mixed with the following: Liquid silicon - 1ml/L - 76ml Cal Mag - 5ml/Gal - 100ml Micro - 2.5ml/Gal - 50ml Gro - 2.5ml/Gal - 50ml Bloom - 2.5ml/Gal - 50ml Fulvic acid - 2.5ml/gal - 50ml Hydroguard - 2ml/gal - 40ml Rapid start - 1ml/gal - 20ml Chitosan Olligosaccharide  - About 30 ml. I ran out of pH down and improvised with Chitosan. Managed to bring down the pH to 6.2. Improvise. Adapt. Overcome! :) pH - 6.21 EC - 1.28 mS/cm T - 26 14/4/2021 - The HLG 550 light seem a little dim these past week. After checking with a Quantum PAR meter, the PPFD was only around 400 mid section at 24 inches height from canopy. At first I thought it was the LED diodes but after disconecting the dimmer potentiometer, the PPFD went up to 1200. So it was the dimmer malfunction. So I just left the light as full brightness 24 inches above canopy since the girls are in bloom now, 16/4/2021 - Major defoliation done for all 8 plants. Basically removed any large leaves shading the lower nodes as well as to improve air circulation. Did supercropping on several branches to maintain even canopy.
Likes
3
Share
@Bdawg
Follow
Getting frosty in eya Flawless finish few nore days
Likes
6
Share
@Mandatem
Follow
59 Days I think it will be ready by the end of this week. There are a few amber trichomes. Es wurde heute noch zusätzlich eine Lampe ergänzt. Die Seitentriebe etwas aufgebogen damit das Licht etwas besser an die unteren Triebe gelangt.
Likes
13
Share
@Lazuli
Follow
I feel this plant will need 14 weeks so 3 to go, next week i start the overdrive
Likes
6
Share
This week I topped each main cola at the 3rd node as usual and performed a selective defoliation to improve light penetration and airflow. From now on, I won’t be doing any more apical cuts. In a few days, I plan to introduce a scrog net to start guiding the branches and prepare for an even canopy 🌿💪
Likes
12
Share
This week we started to flush after the first signs of proper cloudy trichome cover. Not long now! Plants have been quite heavily defoliated in the top 2/3 of each branch, in an effort to maximize flower growth in the last stages. Considering using ice for the final 48hr blackout. Any ideas welcome. Still piling on mass at a surprising rate and all stinking heavily. GLue Gelato has some sweetness and heavy gas notes, and the cream Caramel, well like name like shtank haha. Close to first ever harvest. It's business time!
Likes
16
Share
@Mrg7667
Follow
Still see nitrogen toxicity so im going cut biogrow down to half dose and see how it goes! Besides that all looks well Smells are stepping it up in a couple pheno! On the Chocolate Marshmallow side we have a intense sour fruity pebbles on a pheno that is just unreal And on the double d side we have some rotten tooth chem smells coming through!
Likes
4
Share
@QixxGrows
Follow
Day22: As said in Week3, I will not keep this perspective for the whole grow, as it doesn't really show the size of the plant. But it gives a nice view of how to top leaves grow :) The flashes that you see in the video is the humidifier. It pumps out vapour every hour for 15mins. So basically a quarter of each second of the video will be when the humidifier runs. Day23: I changed it, as I wanted to see the size as well. Day24 - Day28: Happy, healthy growth.
Likes
3
Share
Esta será la última semana donde incorporamos Bio Vega a la dieta de alimentación. La potencia de las luminarias al 75% y regamos cada tres días aproximadamente alternando entre fertilizante y agua.
Likes
2
Share
Peyote Zkittlez is back on track after fixing ph issue. Moved both tents to new MH 2x4. More room for growth. Glitter Gas hasn't missed a beat. Even with the same pH issues and runoff at 1.7 going to use plain water next feeding Ph down. 1 week, maybe a little more, then flipping to flower. So far I would say the Growweedeasy.com manifold technique is not only faster but makes for easier training.
Likes
7
Share
@cg_grow
Follow
Starting 12:12 at Christmas with my ViparSpect XS3000 @80% (240W) + new 2 additional SpiderFarmer GlowR80 (80W) that turn on 10min before, and off 10min later than the main light
Likes
25
Share
i accidently bought some unbuffered coco and mixed it with my ussual earth, had major calmag problems in mid-flower but i´m still pleased with the results...also had a little trouble with mold at the end due to bad weather and high humidity in the final weeks of the grow, had to remove a few buds and harvest early @ day 55 of flower....but there's still alot of great looking buds left for me to enjoy and all look mostly done... Just harvested and hung them upside down, currently drying them at constant 19.5-20.5°C and 50-60% RH..will update as soon as they are dry
Likes
21
Share
suggerimenti sulla progressione della coltivazione? mi scuso se non posso rispondere , perche al momento non mi conferma la mail e non so il perche , qualcuno mi puo aiutare? grazie mille
Likes
14
Share
Processing
Likes
9
Share
Earlier watering was fed with nutrients, and my temperature is not low so I should go with minimum to medium quotas with more water avoiding burns, without much runoff mixing with soil compounds and mycorrhizae for better performance I know they need a calcium magnesium for better performance the problem is money I will continue with the use of salt Epson the option I have at the moment, direct sulfur in the soil mix has helped me hear a noticeable change. watering ph 6.2 solution temperature 20 ° - 0.50 g of large white microreceptor 2 days earlier sprayed with ppm-free water via leaves - lights off to serve as a cool-down shower is great for stomata . Simple led panel added as main light source 260watts being divided to 3 plants in the fullspectro tent model, did not get much difference in temperatures compared to HPS, is more the same spectro ratio and UV to reach more directly in the trichomes and terpenes. Moc medium leaves look more like Indica while larger leaves bring one more sativa a set a nice strong sweet smell, I prefer to conclude in the end the true tone I feel, she drinks more water than others the soil is easier to drain So I see in her an ability to take more quotas of nutris, slowly being able to take if necessary always try to avoid burns ...