Just harvested my first white widow, so the blue cheese just got moved into the tent

Finally moved into their forever home and final pots all seems generally good,it's abit tricky with multiple strains as they all react differently so trying to balance and learn what each strain likes is abit harder,net is in place and already using it to spread the canopy out for more top nodes and coverage

🌱 : 💧 : 4l 💡 : Dli: 45 mol/m²/d 🤔 :

Black orchard first week of flower was a bit turbulent, a bit of overwatering and stress combined because of scrog, transplant and flip to 12 12, this plant is pushing forward to its second week of flower.

Manage to get the monster transplanted into the new tent couple of branches broke unfortunately It is taking up almost the entire five-by-five I don't know if it will be over 3 pounds but I sure am hoping My last girl I managed to get 1.3 pounds out of the 4 by 3 tent This one is double the size with a bit more light so hopefully we can get there Nugs already barely fit in my hand halfway done flower 😇😁🤩 day Ok 94 My top nugs are Anywhere from the size of a can of pop up to a 2L Day 97 of grow I've decided from now on I'm going to be Putting the day and as how long it's been flowering Day 35 of flower added dense by green planet with ph water at 600ppm and 6.4ph first time let see if it will dense 😃

Somehow I miscalculated the days and started week 6 prematurely. I will just continue here thru to week 7 Day 32 From Seed NYD#2 Started LST. Pot was light, watered at 6.3 including Fish Sh!t. NYD#3 The pony tail backfired. The main is mangled. Despite small nodes, I started LST and watered at 6.3 including Fish Sh!t. Day 33 From Seed Did some research and found out the ponytail should only be used during the light cycle and removed for the dark period. I left it on, which caused the ugly. Lesson learned! Day34 Adjusted and added LST. Watered #2 at 6.5. #3 was still heavy, no water needed. Day 37 Watered, adjusted LST Day 39 From Seed Watered, adjusted LST. Found a bug that isn't a fungus gnats (NYD#3). Inspected both plants for more. Did a neem oil top drench and added Vicks Vapor Rub to the pot rims (bug deterrent). So raised light roughly 4 inches. Day 41 Light watering, adjusted LST ties, top drenched with Neem Oil. Added a few ounces of peroxide to the humidifier. They'll both need a top dress soon.

Tick followed tock Starting to fatten up now 👽🔥🔥🔥 Can't believe the size of these 5 for autos! Epic! Did some defoilation on the bottom of plants removed anything not getting light Lowered humidity to 45-48% for the late flowering! 24-26 degrees day 19 degrees night Smell is picking up big time! I let them completley dry out until I watered again. They all seem to be smashing it! buzzing with results so far!! not long now!!!! 👊👽👊

Marching through flowering!!!!!!! Starting to get a bit frosty. I flushed her during the week (thank you @BigDaddyK ) The runoff was a little too acidic at first before coming up.

for the girl, several yellowed leaves were removed :) everything looks not bad, maybe I would even say very beautiful :) I already increased the light intensity to 85%, I'm a little afraid that there might be a problem due to excessive heat, well, you have to watch :) the girl drinks a lot ,in a week I poured her 12 liters :) I also gave the girl a really strong food mixture with almost 1100 ppm, but I also gave completely clean water with 20 ppm and 6.3 ph :).

Día 1 y todas geminaron vamos a usar lst a todas y algunas lst y poda apical Día 5 desde puesta en sustrato Solo pulverizó

El olor a piel de naranja está en toda la habitación, planta con un aroma único.

Sooo.... The last week was a bit of a pain in the ass. I flushed the plant on day 14 and just gave the plant plain water for the remainder of week 3 in flower. By about day 18 I started to notice that the leaves were getting a little yellow on the top of my mother plant. The LED lights were only 7 inches from the canopy! I hadn't been paying attention to how much the plant had grown and how close it was to the light. I raised the lights so they are 14 inches above the canopy. I thought that would make the color of the leaves return. However, her condition started to get worse. Several of the fan leaves on the top of the plant started to curl up and fold like tacos. I also noticed that some of the top fan leaves were getting copper colored tops and edges. some of the lower leaves under the canopy began to fall off with severe deformities and grey patches. Some research into the matter led me to believe that I had nutrient deficiencies. I knew that I had not fed her nutes in almost a week but I don't think that would lead to the plant's current condition as quickly as it did. I then tested the Ph runoff from the pot and it was incredibly acidic! Almost 5.0! My crap Ph pen had crapped out and was giving erroneous readings. I have since flushed the plant again and properly Ph'd the water. Now I have to wait and see if her condition improves. I hope this doesn't affect the yield too much. Pro Tip: Always calibrate your meters before use!

09/03: Im pleased with their progress this week. They did indeed start growing nicely after their slow recovery adjusting to the removal of the humidity domes. I have my light at 60% and still about 18 inches away. My humidifier is never getting the humidity pas 59 when i want it to be in the mid 60s. And so i ordered the big AC Infinity humidifier and hoping it will do a better job. I was low of my typical nutrients and so i decided to try something new and bought an Advanced Nutrients stack. Going with the three part and B-52 and will mix in Big Bud, Overdrive, and Bud Candy later in the grow. Excited to see how this works out as i have seen a lot of great grows on here with these nutrients. I am just following their feeding chart recommendations until I dial in what i like. I plan to transplant them to their large 7 gallon auto pots sometime this week. Maybe as soon as tomorrow. 09/05: Transplant day! Today I transplanted them to their final 6.9 gallon pots. They all had great root systems that had not reached a root lock yet. I added some dynomyco to the transplant holes to help with root production. I will continue to water from the top for about a week before turning on the autopot drip system. 09/08: Decided to do an aggressive topping today, this was done at the 2nd to 3rd node, depending on the plant. I have not yet decided how i want to train them, but this will leave me with options while i decide over the next week. I know it looks like i took down half the plant, but trust me, we good. I may actually go with a form of main-lining that ive wanted to do for a couple years now.

Still fighting with pH. It was 5.5 when I add the plants, but when I check a few hours later, it's already above 6.5 Days 2: I trimmed the bottom fan leaves from Purple Kush to keep them off the ground. I also topped Purple Maroc. pH was still below 6 Day 4: Veg is gone wild..... I have been shoving the large fan leaves on the Autos underneath other branches to allow light in. Red Purps may get topped yet again. Day 6:. Switched autos to bloom nutrients. Added Purpanator to them. pH set to 5.5. Topped bottom and mid branches of Red Purps to keep canopy more even. Day 7: replaced CO2 generator.

https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND THEY WILL REACH FOR THE STARS WITH MARS🤘🤣. So it's been almost a week under the new MARS HYDRO FC4800 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. I think it might be the blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I've owned a gorilla grow tent before and MARS HYDRO TENTS are better. Don't waste the money on a gorilla tent, get a mars and save a couple hundred bucks for your fertilizers and soils👍🤜🤛I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll @marshydropenny Happy growing to all my friends 🤜🤛

Hello. This the end of week 8 and the beginning of week 9 of flowering. Took that partly dead Pink Kush branches out and will use them for kief. The room looks much better with it gone. The plants/buds are bulking up and some are heading for the floor The Critical is quite heavy The Pink Kush is Pinkish Purple now. And the Dos Si Dos 33 is frosty. Just started flushing, I'll flush for the next 2 weeks. Then a day or 2 of dark... then harvest. It's all about taste from here on. I add 30 mm of 30% hydrogen peroxide with every 5 gallons of tap water I use for flushing. Helps finish the plants better than anything else I've used. They will even get color when it's not cold out. The Blackberry Moonrocks will be finished in 2 weeks even thou it's mostly white with stigmas now... see the pics. OK. Keep Growing Straight. Chuck.

Hello Diary. We have reached the 9th week, 6 weeks of flowering and I think we are nearing the end. My estimate is another week until harvest. I look the situation with trichomes every day, most of them are milky, when I notice that some brown ones appear here and there, it is time to harvest. Along with Sherbet Queen on the “Farm” are two Mimosa Auto, which have grown huge, over 110cm so it’s pretty crowded in the grow-box. That's why it became quite difficult for me to take them out of the grow box so as not to damage them. The color of the leaves slightly takes on a lighter green color which slowly becomes yellowish, the flowers are nicely filled, they are big and heavy so I had to connect the plant a bit to the stick and fabric pot to stabilize it and prevent the branches from cracking. The temperature was high this week, around 30 degrees, and this is caused by the great heat outside which was above average this week. Humidity is a little above 50%, which is more than would be ideal, the cause is also heat, so the soil evaporates more and releases moisture. I have two fans that blow for 24 hours and thus prevent the potential occurrence of mold or similar problems. Ventilation also works at maximum power. Watering is still every two days, and more or less that’s all that happened this week, I’m patiently waiting for the harvest. Here is a brief overview of the week. 11/07/2021 - Day 57. Watering. I always prepare about 8 liters of water, p.H I adjusted to 6.4 and watered all three plants evenly. Temp / Humidity on the farm - 30 degrees and 50% humidity. 13/07/2021 - Day 59. Watering. Same procedure as two days earlier. Temp / Humidity on the farm - 31 degrees and 55% humidity. 15/07/2021 - Day 61. Watering. p.H - 6.2 Temp / Humidity on the farm - 30 degrees and 53% humidity. 17/07/2021 - Day 63. Watering and photography. Temp / Humidity on the farm - 30 degrees and 60% humidity. That’s it for this week, a little more and there will be a harvest, I can’t wait for next week. Until then, enjoy.

EC Wert müsste etwas korrigiert werden mit CaLMAg, Entlaubung wurde durchgeführt, wuchs ist gleichmäßig bis auf eine AH die ich nachträglich als Steckling bekommen habe.

Adjusted the pH range and watered when needed. That will continue to be the case from now til the end of flower. I can hardly wait for harvest. It's going to be great. The zkittlez is getting plump and is already dense as the PCD I grew. It doesn't quite have the smell profile I was hoping for but the frost factor is crazy. The Liberty Haze is smelling great and is fantastic in structure the colas are about 12-17" long. It's great! Stoked for the last half of flower. The forbidden fruit is being neglected but it's managing to hang in there.