Week 6 for these ladies. They are nice and healthy. The MAC in Alien Icicles lineage is shining through. A bit of a slow grower and is compact. We'll see what the stretch is like. She has stretch in her genetics so it could get interesting. Guillotine Gas is showing good vigor and growth. I will flip them to flower in a week or so.

Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ________________________________ 📅 D56/V49 - 10/01/24 ⚗️ EC: 1.1 pH 7.2 🌡️ T: 23 °C H: 58% 🌊 🍗 💧 💼 🧠 🚀 🎬 Added Time lapse video ________________________________ 📅 D57/V50 - 11/01/24 ⚗️ EC: 1.1 pH 7.2 🌡️ T: 23 °C H: 58% 🌊 🍗 💧 💼 Big Defolation and LST 🧠 Preparation for blooming stage 🚀 Finally she has her space back, so all the grow box is for her 😊 🎬 Added 4 pics ________________________________ 📅 D58/V51 - 12/01/24 ⚗️ EC: 0.9 pH: 7.6 🌡️ T: 23 °C H: 58% 🌊 Added 4L 🍗 Added Bud Candy - B52 💧 💼 Added ScrOG net. Defolation and LST to prepare the blooming stage 🧠 Blooming mode almost ready 🚀 🎬 Added Time lapse video and 1 pic ________________________________ 📅 D59/V52 - 13/01/24 ⚗️ EC: 0.9 pH: 7.6 🌡️ T: 23 °C H: 58% 🌊 🍗 💧 💼 🧠 pH is rising too much, but I'll not adding nothing for now 🚀 🎬 Added Time lapse video ________________________________ 📅 D60/V53 - 14/01/24 ⚗️ EC: 0.9 pH: 7.4 🌡️ T: 23 °C H: 58% 🌊 Added 6L 🍗 Calmag - Grow A-B- B-52 - Bud Candy 💧 💼 🧠 It's time to bloom triggering, in the next days I'll change the water for flush and bloom nutes 🚀 🎬 Added Time lapse video ________________________________ 📅 D61/V54 - 15/01/24 ⚗️ EC: 0.1 pH: 7.4 🌡️ T: 23 °C H: 58% 🌊 RES Changed 💦💦💦. Flushing until tomorrow 🍗 💧 💼 Passed lights to 12-12 (21.00 ON and 09.00 OFF) 🧠 🚀 🎬 ________________________________ 📅 D62/V55 - 16/01/24 ⚗️ EC: 0.1 pH: 7.4 🌡️ T: 23 °C H: 58% 🌊 Flushing almost finish, all is ready 🍗 💧 💼 Made some LST 🧠 🚀 Let's BLOOMING !! YEAHHHHHH 🎉🥂 🎬

Watering every day. Tucking leaves and tying down whenever I’m in the tent. Removing large fan leaves blocking prime bud sites. Looking good.

Hello, my growing friend! I'm downloading new photos and day comments every new day, so go back and see full last week diary right now! --------------- New week starts. 🌞12.12.2022 My girls looks healthier then ever after I flushed them both with 'GHE Clean' solution and gave them 75% of nutrient's 'Pre flowering' doze. I hope this trend will last till the very end of this run. Flowering in progress! I sprayed them with 'SeaWeed' as usual and that's all for today's treat. 🌞13.12.2022 Today I watered my babies with 75% of 'GHE' nutrients plus 'Advanced PK' in a half of recommended doze. Their leaves looking downwards after the lights was ON and i think it's because of poore watering cycle or it's overheating. I increased lamp to plant distance to 40cm. I'll try to water them more often from now. I sprayed them with 'GHE Protect' solution to stimulate immune system and it's a last time i using this nutrient. Upd: 10hrs after watering they looks fantastic. It was water deficit. Flowers developing and smell increased. 🌞14.12.2022 I think my ladies like PK complex i gave them yesturday. Plus 2cm per 24hrs. More stigmas. Healthier look. Ph don't want to go down, it stays ~7 ignoring sulfur I putted in substrate two waterings ago. 'SeaWeed' spraying today and nothing more. 🌞15.12.2022 +1cm today. I changed girls diet. Now they'll take 'GHE SeaWeed' with water directly. Plus 'Advanced PK' in a 80% of recommended dose. Also I stopped giving them 'GHE Mineral Magic' and 'GHE Diamond Nectar'. They aren't necessery when flowering in progress. All other nutrients ('GHE Flora TriPart', 'GHE O.G.Bloom') - goes in amount of 75% from recommended doze. I don't want to overfeed my babies. Also, EC of solution is ~1.2 as well. PPM is 830. I think this are max numbers to reach. They were good sprayed with 'GHE Protect' once more. I'll spray them with pure water from now. Upd: Before watering all leaves are bent down (I watering my plants every 48hrs) and they are rising up in a couple hours after the procedure. I need to water them more often, but I have my job wich cause me to hold some steady watering periods. I'll wait some time more and then will shorten watering time to once per day graphic. 🌞16.12.2022 And again +1cm per 24hrs. It's nothing planned for today, only clean water spraing. Watering stays for tomorrow. I turned ON my main ventilation with two charcoal filters. There is no signs of a smell now, but it's too noisy. It's like a car engine running near my bed all the time. Well, I need to sacrifice something to get good results... I love how my BPPa#2 looks. It's big and bushy. Now You can clearly see it's future bud brunches and I'm really satisfied with it growth. #1 is much smaller and it forming not so much yields. There are signs of overfeeding on it's leaves and that's why it goes like this. I think #1 was too small when i started feed them bouth in a 'pre flowering' mode. #2 swallowed it, but #1 couldn't. I think she'll made it, with slightly smaller size, but as delicious as #2 will be. 🌞17.12.2022 I fed my girls with a seme mixture without 'G.H.Bloom' since it is bloom activator. It was really hard, because I got ill yesturday and have 38° temperature. But feeding is feeding. And clean water spraying, of course. Upd: +4cm per 36hrs (I forgot to do mesurments in the morning). 🌞18.12.2022 Nothing special today, only fresh water spraing. +1cm per 12hrs (almost 2cm) My BPPa#1 and #2 looks different. #2 already has violet colour in its stigmas nodes. #1 all white and it has smaller hight (20cm, and #2 has 28cm). It looks like different strain. I don't think it is so, but interested, why. ------------------------ Week ends.

She is growing strong and healthy...maybe 2 or 3 week more...

This was a fun project that was a few years in the making and a year later to see if they would last a season for this upload to happen. Before any of this I would bike aorund town grabbing up all the old Ikea solid pine bed slats that I could find and storing them in the basement. I have a lot of wood down there, any size worked as long as I have enough of them. The hot days to find them were the first and last of the months because that's when people where moving in/out. I also kept an eye on the free section on local online classifieds as well. The entire purpose of this was to recycle as much off the streets as I could before buying anything to finalize the project. In the end I only bought sealer, screws and some takeaway/beers. All the wood was 100% free and salvaged off the streets of Toronto saving it from the dumpster bin. After collecting all the slats for about 2 years I was playing aorund with them on how I wanted to make this work. I had previously done a little project like this before but I messed it up and the boxes where crap. did not last longer then 2 seasons, they where thin and shallow as well could not grow much of anything in them. I Was talking to my friend who is renovating their house and we brainstormed some ideas on the boxes, I found some designs I liked online and said lets make something like this out of what I have here. We tossed out a few of the design features when looking at them as it would have been wasted wood and extra work not needed. If I had more wood them maybe it could have been an option but simple was the name of the game. They taught me what I needed to know like how the miter saw and sander worked, plus all the other tools I was using. They did help out with a table saw and creating the triangle support joints in the corners, They used some pine left overs they had while making a staircase indoors. I did not feel up to the task of using a table saw given all the relatives I know who have lost a finger to them. In the end we decided the design would be three boards high and take an alternating pattern on corners. layer one short, layer 2 long, layer 3 short. Went with a galvanized and painted deck screw so it can take the weathering. Ran into some problems like making everything level as some of the boards were warped and other ones had undesired aspects like knots and tacky sticker goo I could not remove. So I used them for the base that will not been seen so much. Clamped everything down and called it a day. Once it was all done and over with, I then brought them back home from my buddies work garage and started to seal them. I went with a boiled linseed oil as its a food safe option should the wood degrade into the soil I will plant in them. I will need to reapply it to the boxes year after year but the main coat is the most important one and I put it on 3 layers with a good dry in between coats. the inside of the boxes that where coated did not degrade at all as the sun did not hit them so it will not need a new coat just the outside. Overall the end result was very impressive for myself, I've never taken a woodworking class ever and It was a near perfect outcome for me. Heavy Duty Planter Boxes for all my gardening needs. I made a last min decision to add in a plastic liner to preserve the wood even longer and stapled that into the frame. it has held up quite well and may need replacing end of 2nd or 3rd year out in the sun. Used a thick moisture wrap plastic with UV protectors in its formula. Lets see what I can grow in them this year! m0use's haus of projects - garden box edition

Week 7 of flower, she is pushing along well. I went ahead a began flush and cut the feed. I want to fade her out nicely. I tied down her lower branching and really opened her canopy up. She is nice and bushy, running budsites up and down each cola. She looks like she may need another 2 weeks. But we shall see. She is very sticky and has fuel/pine terps coming off her. Her buds are starting to swell, but calyxes not very dense/firm yet. May need to let her go for maybe 3 more weeks to fill out nicely.

NOTE: Measuring light distance from top of net rather than top of plants for consistency. - Plant were developing nice broad leaves, but were refusing to grow any taller to push through the netting. So, I raised the light 3 inches and switched on both blue and red lights to allow them to stretch through, which did the trick! - Placed a lot of stress on the plants this week trimming and training them to grow throughout the ScrOG netting and removing lower branches that were not receiving as much light to allow the top leaves to get more nutrients. - NEGATIVE: switched off the grow lights to get natural color photos and forgot to turn them back on until several hours later! :-O My babies are too young to flower at this point. Hope they stay in vegetative state without any serious impact. Fingers crossed! - Been experimenting with clones from clippings. Last week didn't do to hot, but this time I got two nice long pieces and trimmed off the majority of leaves to give the roots a chance to develop without fighting over nutrients from the leaves. The trick this time was 1) sufficient size of clipping, 2) minimal leaves, 3) dipping the base in mycorrhizal fungi concentrate, and 3) placement near the humidifier to ensure leaves get sufficient moisture. So far so good. Check them out in the time lapse video.

2/4/19 - I'm really pleasantly surprised by Tangie'matic. I expected stress and stunting after topping, but she's pushing back with vigor and growth! I'm relieved, as this is my first topping experiment, and I'm doing it with an autoflower. Naturally, learning something new comes with a certain degree of uncertainty, but I feel like Tangie has been more of a partner in this learning process. For that I am thankful. 🙏 2/6/19 - Reservoir Δ Day! Tangie'matic's roots look immaculate!

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Umstände.

Fairly easiest plant that Ive ever grew! Very resist and Phenotype was on point. Only veg’d them for 25 days and managed to fill the entire 2x2 (60x60cm) Scrog net. Flowering time was a bit longer than 49 days, but still doable. ## From seed to harvest it took 90 days ## ## Three plants yielded me about ~150g of dry product ##

The transition is officially happening—the plant has now fully entered the flowering phase!🌱 The stretch is kicking in, and it’s growing rapidly, really taking off this week. It looks incredibly healthy, with vibrant green leaves and strong development. Thanks to the LST, it has spread out beautifully, allowing for even light distribution and great bud site exposure. I’m really happy with how things are progressing and excited to see how the buds start forming in the coming weeks! This one is looking very promising.💪😎

These girls are getting ready for harvest.

.....

She is putting all her effort in growing two long and three little branches. I turned her a bit more towards the sun and out of the shade of her neighbour plant. As the weather is great, she needs more water now.

27-08-2026 Somehow it’s hard for me to keep updating the progress of my cannabisplants. I wanted to do it weekly, but it just doesn’t happen. Our fruits and vegetables need to be harvested and our animals want a lot of attention too! I’m so happy growing with Biotabs, I hardly have to do anything and if I don’t have time, my plants are growing anyway. In week 16 (first signs of pre-flowering) all the plants got watered with 5 litres of water with 20 ml of Bio PK 5-8 and in week 20 again, 20 ml of Bio PK 5-8 diluted in 5 litres of water. This is the third time I had to water the plants manually. I just love this way of growing. Perfect for someone with a chronic illness. Flowering started earlier than last year. I’m so happy, maybe these Early Versions will finish in time, before the autumn rains are coming. The plants have a nice green colour. I still need to ‘shave the legs’ and cut some branches and leaves away at the inside of the plant. Especially now when it rains sometimes I want them to dry quickly. I already removed two baskets of leaves and small branches from NL x Big Bud and Burger Kush. GMO Fast isn’t flowering yet. She is only showing a few pre-flower hairs. I think she won’t make it in time… GMO Fast also had some issues during a summer storm with heavy winds and rain. One of her main branches came down. It was still attached to the centre of the plant, but it began to rot and I had to cut it out. I lost 25% of this plant. It’s my own fault. She is over 2,5 metres now and her height makes her susceptible for wind. It makes me think about securing all my plants with long bamboo-poles or sticks. If the flowers start growing, all those branches will get heavy eventually. Maybe it’s time to prioritize the cannabisplants at this moment…

This girl it is a very resilient client has only received mistreating him from me I have them all tied up like a bouquet of flowers came in then no space to breathe and no place to move because it has such an incredible stretch and growth that it was taking over the light of the entire tent despite being a back up plant that I put in the same planter with another string that I thought I was going to lose her this one is very strong and I have not allow her to develop properly so it is very Bushy plant I am not sure if it’s me or is the strain of plant nevertheless it has a very vigourous growth thank you for reading I will continue to update have a happy grow

420 Fastbuds week 1 Gorilla Zkittlez Auto What up grow fam. This week has been a really good one. Went away for a few days on holiday and came back to my girls doubled in size and knowing my drip system worked while away is an amazing feeling. All in all Happy Growing