This was the final week. I had no choice to harvest early because pm was starting to settle on a lot of stuff in my garden. The UV light worked for like a day or two and it came back. It's just not worth it. It turned a lot of the buds hairs brown and the leaves did suffer a little damage. Part of that was the peroxide solution. I mixed a little too strong, and it didn't seem like it hurt the plants, but after a few days, they showed the damage. It just seem to burn the leaves a little not really the bud so that's good. There was three days of rain coming, so I wanted to get it cut down.I didn't intend on harvesting so early, and I have no place to dry this because other plants drying so I was forced into freezing it. I cut down branches and wet trimmed it into a bin and ran to the freezer every 10 minutes to get it frozen right away. I maybe could've dried it and had some decent flower but I figured this would be a good opportunity to learn about making bubble hash. I decided I wanted a stainless steel mixing vessel and found this beer brewer for a good price. I think it's gonna be solid. It has a nice drain at the bottom. Then I bought some 5 gallon buckets for spacers for my 5 gallon bubble bags I use the heat gun to peel the stickers off and to heat the bottoms up to make it a little easier to cut them out with the utility knife. I used the heat gun again to soften the edges a little bit so I don't damage my bags. I can't do my washes until I'm done trimming my flowers, but I got a 2 Inkbird temperature controllers to bring my studio down to bubble hash temperatures with my ac unit. I could wait a little longer until it gets colder but I'm not sure how cold it's really gonna get and I wanna get this done soon as I can. I'm gonna have to try it without a freeze dryer so that should be fun and I'm not going to micro plane it at all costs. I got 25 µm screens for drying that I will use a towel to wear most of the moisture out then see if it on to some parchment and I should be able to get my studio really cold and dry to get it dried relatively quickly. I'm seeing it recommended to be 30 to 40% humidity and 50° or so for about a week and it should be dry enough to press some rosin. I'm gonna try to separate out the full melt hash, but honestly I think I'm just gonna get a wide spectrum pool on this hash and just press it into rosin to make it easier to deal with. I kind of was trying to find the cheapest bags it's still decent and wasn't paying attention when I bought it really cause there's no 45 µm and my set and I'm saying that to be the lowest recommended the pool but also seeing a lot of people pulling some nice 25 µm so I think with my early harvest I might have some smaller truck head so I might not be a bad thing to have that bag as my lowest. I'm going to catch everything under 160 to 25.

the plants both critical kush and medical mass have sprouted quietly 8 seeds or planted and 8 are germinated i am happy and thank royal Queen seeds of warnings sent

So i had to take all my plants inside because i found bud rot on 2 of them & the weather wasn’t going to get any better, had to transform my bedroom into a grow room😂 & i have 2 more plants which i am going to finish next to a window.. The smaller plant to the right is a Northern light by zamnesiaseeds that has a seperate diary if you are interested! I really hope the bud rot doesn’t spread anymore & if anyone has any tips or tricks for that they are always welcome!

For LIQUIDS ******GREEN BUZZ LIQUIDS***** also organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.

😁

Roots are growing in rock wool cube. Only 1 tank have water ( cuttings have already colonize the rock wool on this one ) i'm waiting for better root to add water on the second ( 2-4 days maximum ) Edit 24/01/2019 : - Add First timelapse - End of the Week, everything is going well, both tank have water, i top them to get 4 branch by plant, i'll remove small branch i don't need to keep only the biggest 💪👍

A week of noticeable growth acceleration and the appearance of the first pistils. As the days passed, the substrate became compacted and it was necessary to fill the pots a little with more substrate.A week in which it was very cold and windy outside again, making it difficult to maintain a comfortable environment inside the grow tent. Since the grow tent is outside, I have to deal with this problem. Una semana de una clara aceleración en el crecimiento y la aparición de los primeros pistilos. Pasados los dias el sustrato se va apelmazando y tocó rellenar un poco las macetas con más sustrato. Una semana en la que volvió hacer mucho frío y viento en el exterior y me fue complicado mantener un mejor ambiente dentro del armario. Al tener el armario fuera de casa tengo que lidiar con este mal.

This Baby just can't stop grow. i wanna smoke this strain so bad so badddd. To give you an example of why i'm telling you this, check this out. i have my grow tent with the door open in my house with my infinity at maximum speed 10/10. AC ON 24/7. This days are really really hot over here and if i close the grow tent the Temp will raise up to 85%. Anyway.... 2 days ago i had a visit in home and i was a little afraid for the smell, turns that when they got here the first thing they ask for.... was the fruit that smell like that?. 😂😂 I said that i made a casquito de guayaba (that's a famous cuban dessert made from real guavas) smells very very sweet and taste asome. This plant smells like that. Like a candy or a very sweet fruit But she's taking her time and im glad of that. I want to tanks to @jinks101 @Trueorganics84 for the help they give me in this, my first grow. 🙏 thank you all guys...

Vanno tutte cose bene spero di raccogliere molti chili

Seguimos utilizando los mismos productos que la semana pasada, solo que esta vez aumentando el EC a 1,2. Hoy 26 de febrero lavamos las raíces. Yo creo que tal vez estaban con un bloqueo de nutrientes, no se ve como si estuvieran sobre fertilzidas porque creo que las hojas estarían más de un color verde oscuro y duras, como cuando parecen casi de plásticos. Ahora las hojas están como caídas, con esas puntas amarillas, lo cual me preocupa. Espero que con el lavado de raíces vaya mejor. No hemos podido controlar bien la temperatura y ha llegado a 26 durante algunas horas, podría la temperatura causar este efecto en las plantas? Gracias por leer y cualquier concejo es bienvenido 💚

10/5 Day 31. I've added a dehumidifier now that the plants are starting to show signs of pre-flower or flower. Maybe one of the expert growers can let me know. :o) 10/6 Day 32. I did some more defoliation to open up the air flow at the base of the stem (mini lollipoping). I also re-arranged the pots and lifted the air pumps so that I could have more room for training them. This should also improve air flow. I moved the rotating fan so that it is pulling air from the lower tent intake. Move the 6'' hurricane fan so that it is blowing down at the center of the tent. More LST training after giving everyone some more "elbow" room! I will allow them to recovery for a few days after the defoliation, but will keep adjusting the LST wires. - Added 1 gallon of purified H2O to each plant. No signs of any deficiencies on the leaves. Nice and Green with new nodes popping up (I think). Red - PH 5.54 TDS 703 EC 1.459 Blue - PH 5.77 TDS 735 EC 1503 Yellow - PH 5.6 TDS 693 EC 1.482 Blue (runt) is finally showing a growth spurt and has almost caught up to Red who seems to have healed from the partial stem tear. Yellow seems to still be the front runner in size and horizontal stretching. I will continue to train them until they definitely show signs of vertical growth and bud formation. At that time I will switch over their feeding to decrease N and increase P & K. SO far the GHE products are doing well, I might switch over to advanced nutrients for the next grow. Roots in all 3 pots are filling up and are still nice and white. Thankfully I am able to keep the water temp around 74-75 F. The UC Roots product is doing it's job as well. As of right now I'm not using any type of extra CO2 generator, but have watched some videos on You Tube on making a DIY. I wish there was more community involvement on questions and the need help section of this site. Also a lot of the You Tube sites that claim to cater to the "beginner grower" seem more interested in their "hip" music selection, video shots of their plants, and talking a lot of nothingness just to get viewers, verses providing quality content to really help the newbie growers. Ok off my soap box. I am really enjoying this grow and today after spending about an hour in the tent it was quite relaxing and therapeutic tending to the plants. 😊 10/7 Day 33. Rest in Peace Eddie Van Halen! Your influence in rock and roll will always be remembered! Feeding day! I am liking the 4 day schedule giving them 1/2 of the weekly recommended amounts per a consensus of growers who all say it's better to feed a little less, and make any additional increases as needed. The extra day helps to spread it out too. Also the importance of looking at the plants daily to see if there are any issues. Yellow is drinking more water that the other 2 and is still the front runner in overall growth and size. To think Yellow almost didn't make it past the seedling stage due to a "stretching bend" injury during week 1. - Amounts total in 4 gallons. UC Roots 8ml, CalMag 5ml, Micro 6ml, Gro 2ml, Bloom 6ml. These amounts are overall as the pots have 4 gallons of water in them. I adjusted to pot size in the description above. I made some small adjustments to the LST wires. All of the plants are now competing to who will become "Top Cola." I've also decided to name the plants per their growing pot color. Ruby, Bertha, Yuki. I picked Bertha as she was the runt, hopefully the name with inspire a great weigh in on dried flowers! 10/8 Day 34. Plants showing some signs of heat stress. I raised the lights up 2 inches. Now that I'm in flowering, heat and humidity reduction will get more of a focus. Tested the PH and it dropped to 5.2. I re-calibrated the pen just to make sure. Since they are starting to really drink more water I added 1/2 gallon of regular tap water that had been de-chlorinated. Checked PH 3 hours later and it is back up to 5.8. I have some PH up solution that I use for the aquarium, so will decided if I should adjust PH with watering using purified store water to lower PH and tap water to raise it since I anticipate them needing a gallon of water added every other day. Or I could just PH up the store bought water. 10/9 Day 35. Heat stress seems to be subsiding, but have noticed a few of the leaf tips are showing signs of nute burn. Overall they are looking great. I will monitor the leaf's for any additional issues. I know autoflowers like to be under feed compared to what the fertilizer companies recommend. I might look at going to a feed every 5 days using 1/2 of the recommended feeding amounts, along with seeing what the plant leaf's, water chemistry is telling me. As this is my first Cannabis grow it feels like I'm trying to "learn how to fly this particular model while I'm building it!" Anyone else feel like that on their 1st grow? 10/11 Day 37. All is growing well. Added a mixture of store water and tap to make adjustments to PH dropping. Each girl needed 1 gallon of water. Flowers are starting to grow :O) Ruby - PH 5.0 TDS 786 EC 1.651 (added PH up water to correct and an extra dose of 5ml UC Roots) Bertha - PH 5.96 TDS 858 EC 1.831 Yuki - PH 6.09 TDS 753 EC 1.725 Week 5 Lessons Learned: 1. Bought some Botanicare Silica Blast for the next grow. 2. Need to ensure the lid holes for adding water, and the air stone line is placed correctly with the water level sight guage. Yuki (Yellow) will need a new lid for the next grow. 3. More and a bit larger bore drill holes for the LST tie down points on the edges of the lids.

12/21/20 Seeing exponential growth now. I don’t want to start any type of training until I am able to take some clones off each plant. Very excited for this grow Nutes: Veg A: 0.382g/gal Veg B: 0.257g/gal PPM: 140 Water temp: 64°F pH: 6.0 12/22/20 Nutes: Veg A: 0.382g/gal Veg B: 0.257g/gal PPM: 140 Water temp: 64°F pH: 6.0 12/23/20 I upped nutrients today just slightly as to not cause any damages/burns. Nutes: Veg A: 0.437g/gal Veg B: 0.294g/gal PPM: 145 Water temp: 64°F pH: 6.0 12/24/20 Nutes: Veg A : 0.874g/gal Veg B : 0.588g/gal PPM : 275 Water Temp: 64°F pH : 5.9 12/25/20 Accidentally vacuumed up two leaf tips when vacuuming up excess runoff 🤦‍♂️. 1 leaf off both #3 & #4. It was the single blade fan leaf on both so I took off the matching leaf. 2 leaves off each plant for total 4 leaves. Nutes: Veg A : 1.53g/gal Veg B : 1.03g/gal PPM : 435 Water temp : 64°F pH : 5.9 12/26/20 Nutes: Veg A : 1.53g/gal Veg B : 1.03g/gal PPM : 435 Water temp : 64°F pH : 5.9 12/27/20 Nutes: Veg A : 1.53g/gal Veg B : 1.03g/gal PPM : 435 Water temp : 64°F pH : 5.9

it seems that the topping has slowed her down a bit but I hope everything goes well day 28 I reduced the frequency with which I fed the nutrients a bit

Absolut keine Probleme, einfach nur Leitungswasser.

Another week down few more to go can't wait!! First ever attempt of growing my own so really impatient to see the final results now and get to the finish line, that said all has went well upto now other than the size they reached haha, really started putting on weight now it seems and they smell lovely, excited to see the buds fatten and progress over these last few weeks up until harvest now, started 5 liberty haze also they are just coming upto 3 weeks now so check that diary out to, any comments info tips for the final stages appreciated

Defoliated a bit more, feeding sugar royal and green sensation. The smell is really coming through now.

Week 9 - Close to harvest the smell on these is Straight gassy with a strong strawberry smell What a mind blowing strain !!! Not sure when I’m gonna harvest yet but they seem very close

In all this was a terrible harvest, and because I also do videos for my YouTube channel I don't update on Grow diaries properly which I will start doing with future grows.... Well on my next harvest will definitely do a better job of documenting my harvest details. But in regards to the Dark Phoenix, yeah not a strain I'm a fan off. At first I kept telling myself that I done a terrible job that's why i don't like it... But I need to keep in mind that I'm not going to like all strains, all strains are different and we all have different preferences. Some people might like the Dark Phoenix, me personally I'm not a fan. It has that earthy taste to it... Hashy/kushy...... Smoking it as I'm typing that's why 😅 and even with a longer cure I doubt it would make much of a difference to make me like it. But in all still a nice smoke, good high from her, the high hits you straight away and keeps you active and creative.... Don't know what else to say about her really, just trying to give you guys the best most accurate review that I can without bringing my own personal thoughts about the strain. I might not like it but its still a good smoke. 👍🏾😎

😋😋😋😋

Ladies and gentlemen, here we are on day 63 and as you can see, this girl is a beauty...Kannabia Seeds thank you so much for this grow and others so far so good.. this girl starting to get purple hues everywhere and I think there's more purple to come as I dropped the temperatures near the end of flower.. a few weeks back, I noticed she had too much nitrogen, so I completely switched Plagron nutrients green sensation, and i've been using that only.. i think the flush should start soon and hopefully she is done in the next few weeks .. And I have, to be honest, I am very excited for this one.She looks like she's gonna be some really good smoke... I hope everyone is doing well and so are there ladies. God bless and happy growing ✌️