Likes
28
Share
Beginning of week.. They are happy and healthy.. Feeding every other watering this week with half a dose of CALiMAGic and half a dose of FloraMicro.... Adding in some Floralicious Plus along with the MYCO+.. Not on the nutes list here so I'm just adding it in here.. Mid week... They are lookin good.. Been watering daily.. Gonna try to see if I can get away with every other day.. They got a good, late watering today so they should be good for 48 hours in between waterings.. This medium has ALOT of Springtails.. Those fuckers are really getting annoying.. They dont seem to hurt the plants (as far as I can tell).. But when you're seeing literally probably 100,000 every day in the runoff.. I'm a little nervous of any issues to arise. But so far the plants are looking great.. Growing.. Happy.. Healthy.. 😁 End of week.. Whoops.. Didnt get a chance to take any pics.. But tomorrow is when the next week begins! Pics there! On to the next week!...
Likes
10
Share
Likes
6
Share
22/08/2025 - Apenas tenho regado cerca de 1L de agua de 2 em 2 dias por vaso. 23/08/2025 - o vídeo do dia anterior pareceu que estava demasiado amarela, ao vivo não parecia tanto, decidi filmar hoje e subir a ver se não era alguma cena na câmera.
Likes
66
Share
@mulch
Follow
Current Feeding In addition to the above listed Micro, Grow, and Bloom, ML per gallon I add: 2.5 FloraMicro 2.5 FloraGrow 1.25 FloraBloom 2.5 CaliMagic (EDIT: Increased to full recommended dosage to avoid further Cal issues) 0.5 Armor SI 0.5 Floralicious 2.5 FloraBlend 2.5 SM-90 0.5 Roots Excelerator 0.5 Drip Clean 3 Photosynthesis Plus 2.5 Xnutrients Ful-Potential I have switched to white vinegar for PHing down. So far, so good. I will update the PPMs at next feeding as I forgot it from last time, lol. But they were in the safe range. I take them with just the Calimagic, Armor SI, and Micro, Grow, Bloom trio. I would prefer to get the PPM for just the trio, but GH advises to add the CaliMag and Armor SI prior to the trio. I also get the PPM with the additives, and was surprised at how little PPM they actually add. EDIT: ppms Base Tap Water ppm: 199 EC: 0.398 Trio Nutes, CaliMagic, and Armor SI ppm: 616 EC:1.232 Full Nute and Additive ppm: 740 EC: 1.48 Unadjusted PH 7.4 White vinegar adjusted to 5.81, approx 67ml for approx 8 gallons water. After an hour PH settled at 5.9 and I am ok with that. And there are the gory details of my late veg feeding. 7/28/17 All have been sexed, and it is good news (I assumed that ALL Autos would be females but wasn't sure). The stretch is on. The time lapse I posted last week includes up to today. You can see them really fill out the last 3 days. I had to raise the LEDs the last 3 nights. Considering feeding again tomorrow or Sunday. Most likely Sunday, but I am curious if I can push a little extra growth out of them before the real stuff starts. They are not as big as I would like, but the short internodes are very encouraging. My electric bill came in. Almost double last year. The AC doesn't shut off in this heat, nor does it reach the temperature that I set it at. It really can't. Fall photo crop will be much cheaper. Turned off the humidifier but I realized that the fabric pots and volume of wet coco makes it more humid than I realized. I might have to once again spend some money and grab a dehumidifier. The temps will be going up soon, according to the VPD chart, when they go into full flower, so it will not only be slightly cheaper on my power bill, but the humidity will naturally go down as the temps go up, making this a little early speculation. Still, I will need to find the sweet spot as far as temp and humidity to automate my settings. Right now , the in room AC by the tent is set to 68 and the houses central AC is set to 70. It doesn't get below 76 on a hot day in the main area. If you have watched the time lapse video, you have seem my thermometer. I can look at live video of the garden during lights on, at anytime, from anywhere. Today, I went to check it and I couldn't see it because of growth. It is on last weeks time lapse. You will notice it moves to the forefront. I like that kind of surprise! 7/29/17 I started to LST Speed Bud #2 and #3 with the intention of doing everything, but I chickened out after those 2. They are all just so happy, and I don't want to mess it up AND I want to see what it naturally looks like. I know my yield will further suffer, but this is school as far as I am concerned. The money I spent tuition. Right now I am pondering the following for my next grow, my photo grow. It will be a Sativa load. Anyone with any experience growing any of these strains, please offer me as much advice as you can stand to give. I know they can be hard to handle, so I want to go in with a sound strategy before sowing. 4 Durban Poison, 2 Amnesia Haze, and 2 Gypsy Haze I considered Neville's Haze, but if I can't LST an Autoflower, I don't think I am ready for something that takes like 4 months and must be controlled by 10 or 11 hours on light cycle for flower, flowering at 8 inches of height, and growing it in a dixie cup. Then it will only get 45 feet tall. Obviously I am exaggerating a bit, but read some grow diaries of people with good intentions, nice nice setups, and strong desire to grow this plant only to have the plant overcome them and run out of control at at which point most journals end with a final post from the OP saying something like "wow, this thing is growing fast" or "how much more can it grow?" The other sativas sound much more manageable for someone of my limited experience. Provided this current grow is successful, I will have plenty of Indica, so all sativa sounds reasonable since I am primarily growing period because of Durban Poison. Still a long way to go until this first grow is completed. I am definitely going to feed them tomorrow. Will likely hit them a bit harder with the CaliMagic. Minimum 20 ml per 8 gallons. I think I did myself a disservice getting the Hardwater Micro. At around 150-225 variance ppm, my water is not that hard. I need to ask my water district the calcium content of the water. Everything I read about calcium deficiency in coco tells me to go hard with CaliMagic. My 1st hand experience backs up the need. When it hit, it hit HARD. One of the perceived disadvantages of growing so many strains at the same time is the individual attention many strains need and differences in grow cycle. I might counter that my more sensitive strains (I am looking at you, KUSH), might be a REALLY good early indicator to protect the entire crop; a canary in the coal mine to conditions that would hurt the entire crop if left unchecked. We will of course wait for my yield to determine if my theory is correct, but it works for me right now. Let the facts guide 7/30/17 Doing feeding I decided instead of a water flush which I was apprehensive about, I would do a detailed ppm test in runoff. If its anywhere to about 900 ppm (200 or so higher than I put in) is fine, anything higher gets more feed until runoff is where expected. Of my first 5, runoff was normal in 3 of the 5 (Seemango, Auto Speed Bud #3, and NLxBB). Speed bud #2 was over 1000 ppm, so it got additional feed until 900's. Now here is where it gets odd. The first traces of runoff was in the 500s, BELOW what I was putting in, in Auto Speed Bud #1, the largest plant by far.. It ended up stable in the 900s as expected with a PH of 6.31, but how on earth could the ppm LOWER immediately? Coco is cool stuff. Mixing up the next 8 gallons of nutes for the other ladies. All the other plants runoff was normal. The Kush is my sensitive plant, shows me things before the rest do. She REALLY enjoyed todays feeding, She is sticking straight up. I have never seen joy from a plant before, but I think I just might have. Also, the humidity in my house and the tent spiked during feeding. 70% in my house and 81 in the tent. I am definitely going to need to get a dehumidifier and soon by the time the flowers show up. I didn't realize the added heat and humidity of a canopy. The old learning curve. Well, I added a fan to the far end of the tent for more breeze in a thick canopy from the other end and cooling and it will be seen on the time lapse from now on. It was too powerful even on slow speed to aim directly at the plants, so comically I have it oscillating off of walls and such for air turbulence. The plants LOVE the feeding. It is very obvious. The humidity is ridiculous tho. And it takes me over 2 hours to feed them, what with mixing, letting things stabilize after PHing, feeding, testing, and vacuuming runoff. I may adopt an every other day feeding schedule, and only do 5 at a time. I can only mix 8 gallons of nutes at a time, and with generous runoff, those 8 gallons are pretty much perfect for 5 plants. So, if I stagger and do 5 a day, it theoretically should help with the humidity and spread some of the labor out a bit and take advantage of the hydroponic benefit of coco. It should actually take less time than it would if I did all 10. I might skip a day and feed 5 of them on Tuesday and the other 5 wednesday and see how that goes. I love how this site randomly adjusts my nute levels to ridiculous amounts. If you see me adding 2400 ml of grow during flower, just know the site is continuing to randomly change my values. But don't worry people, I have strength of character. I will NOT lose my values, or let my values slide. On principle. Ok, this is getting as silly as some of the nutrient levels it says I am providing. I will long form my nutrients in the journal text per week from now on. The side of one of the fabric pots cleanly separated from a moist chunk of coco, so I took the opportunity to check if maybe i could see a root or 2 coming out of the coco. :D It looked like a white bristled brush. The roots are all over and air pruned to the walls of the 7 gallon pot. I guess between their reaction to feeding this morning and this newly discovered evidence of vigorous root growth (my gamble may have paid off), this mark the official end of wet/dry cycling these plants and the start of a more saturated future. 7/31/17 I have raised the lights up twice in the last 24 hours. i may try to push them and do a full strength feeding and see if i can push her a little, or i might chicken out. They eat at lights on tomorrow, well, 5 of them, to start the new feeding rotation of every other day. I have to think about this. I know I haven't come close to burning them and don't want to start now, but I don't want them to go hungry, either. Any thoughts on this? On the down side, I went outside and said to myself "hey, someone around here is growing weed." i went to my exhaust and could detect a smell. To make sure, I burned some sage in the tent, made sure not to smell it burning, sealed the tent, and went to the exhaust only to heavily smell sage. Lesson learned, don't buy a carbon filter off E-bay. so thats $100 I wasn't planning to spend. And if I need a dehumidifier... blah 8/1/17 There are a couple chunks missing from a couple leaves. Pic posted. Any ideas what might be eating my plant? I apparently can't post more on this week. Sorry. Limits
Processing
Likes
13
Share
@MG2009
Follow
Week 3 males developing right on time! Pollen will be dispersing soon. So now trying to nail down who daddy was? Week 3 day 1 males looking very nice, no sign of either one showing female flowers( no hermaphrodite/ true male) but I will stress them more after reveg for severe stress test. For final results. Looks like I forgot to feed mom! Shit! But I did not.I used bio tone starter 5-1-1 by Espoma gonna feed in am. With tomato tone with myco 3-4-6 it's all I got and organic to boot 👍 Last grow with Captains cake went to 11 weeks 2 - 3 applications should get me to finish line. No flush should be needed, it's feeding the seeds growth. Looking at 07/01/2018 harvest. Fingers crossed! 05/05/2018 First burst of male pollen is flying in the air, gonna try to get video of it as I shake the males. I am brewing tea with worm castings unsulphured molasses,topped off with protilizer immediately after brewing it. Give them a little love (Tea) while they are making seeds👊
Processing
Likes
3
Share
Day 1 of week 3 today. Everything seems ok added some pk booster no problems so far. Update on more photos for this week. Feeding 1.7ec and no signs of burn etc maybe up the ec to 1.9 see wot the bitches can handle. Feed just ph water once every1/2 weeks
Processing
Likes
17
Share
Alien vs Triangle is coming along great! Good bud site development and she is starting to stink. Its a unique aroma I haven't quite come across before. Very pungent, slightly fruity, but still unique and hard to describe. I'm looking forward to the smoke report on this girl! 👍
Likes
22
Share
@J_diaz420
Follow
Esta semana una pequeña defoliación superior, solo dos hojas por planta y me decidí tarde en hacer poda de bajos , como quedaron los brotes bajos a la misma altura puede que coloque malla scrog como tutor para ayudar a soportar el peso de los futuros cogollos.
Likes
2
Share
Yes I my peoples cheers and love Here we flush them to a future crop
Likes
6
Share
@Cainb
Follow
The one on the right is still stalling putting bud on. Coming from dry amendments to coco has been fun but back to soil on my next run
Likes
15
Share
(germination through first week of seedling 11/29-12/10) Days 1 to 7 Starting a new grow with two Royal Queen, Purple Queen Seeds (thank you Royal Queen for making this possible) I plan to be rough with these plants and top them both to 8 colas. This journal will be different than my last (alot less detail) but I will still look for new opportunities to learn something new that I can share. I also plan to take at least 5 pics per week with 1 video and 1 'pretty' cover pic per week, however I also plan to delete the excess details at the end of each week. I had these seeds for about 4 months now. They have been stored in the fridge inside a paper bag. I took the seeds out of the fridge and let the rest on the counter for two days before dropping them in water. After a seed inspection of which I noticed some unatural bumps on the shell of one, but no cracks or splits, I dropped them both in purified water for 19 hours. Since the shells still hadn't cracked, I then transferred both seeds to paper towels with the belly button side up and pressed them against the glas side to make the tap root grow straight down. These seeds took 2 days to show a crack in the shell from the time that I placed them into the paper towel - Once they cracked, I cut the middle of Rapid Rooter starter pods and placed the tap root down inside the pods. I then closed the pods with ends of toothpicks and placed them in an incubator until they showed a tap root growing out from the bottom of the pods. That took a total of 4 days from paper towel to transplant day (now called Day 1) where they were about 1 to 1.5 inches above the soil line after I planted them in 1 cup pots. Dynomyco Mycorrhizal Inoculant was already mixed into the ph balanced soil that had been growing Happy Frog mycorrhizae for about a month. I used 8.75ph purified water with the soil to create a soil with 6.3ph (this soil has been notorious for being extremely low on ph and by week 4 to 5 after second topping the first fan leaves show a calcium deficit.)
Likes
14
Share
The end came surprisingly fast in the end - I had to move quick. I had to improvise a drying solution, since I only have a small grow room and not much space, since Fat Monkey Auto still takes some time to mature. A little grow chamber made of foam board, with a PC fan added for some air flow. Can't wait to trim her and let her cure before entering the next phase.
Processing
Likes
4
Share
@inxxx
Follow
Hi everyone. Time for another update. Day 6 since I flipped lights. All ladies looking healthy, no stretching at all so far, might take the net down after week or two since I’m keeping them low. I also have few more clones of royal gorilla, danceworld and random autogorilla seed sitting in my veg tent. I’m very happy with CMH system too.
Likes
136
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 1/2/22 😽🎉 Happy New Year Growmies!! These seedlings seem a little small for their age but i assume they're just itching to be up-potted. Space was an issue for a little while but we just cleared the tent to make room for this grow. Seedlings are praying almost full time to the MarsHydro...We started feeding lightly this week (<5ml/gal of grow solution) and will be placing these in their final (5gal fabric) homes when our new bale of ProMix arrives in 1-2 days...thanks as always for dropping by and happy harvests everyone!! ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 01/07/22 We up-potted 4 of the Bruce Banger today (the 5th plant was given a good home with promises of future clones), they were place in their final 5gal homes.. The SP-3000 is a very intense light, we're currently running it at 100% and 24" but we're watching closely for any signs of stress...all plants received a mild leeching solution, we typically do this for all our transplants... thank as always for dropping in and happy harvests everyone! ❤️🌱 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~
Processing
Likes
10
Share
@Xspellsx
Follow
Added a tnb naturals c02 bottle. It seems ok havnt yet bought a ppm measurement device for co2 so not sure how well its working. Ive done some research and the canister with the original contents doesnt seem to put off enough co2 for it to matter not even with 2 of them! I do everything myself though always have so i got to thinking my mushroims put off co2 but the led kills them huh??? I brew beer and that gives off co2 i did some more research turns out bread yeast baking soda to drop ph to 5 and sugar and water does the trick in a dark container like a tnb naturals bottle wrapped in alinum foil. I ordered high gravity yeast for making lager like steel reserve high alcohol content more reaction more co2. Using brewers yeast which is cheap 10bux a lb 1 tsp 1and hal cup sugar NO BAKING SODA NEEDED WITH BREW YEAST that includes champagne yeast which im used to using. Im going to grind rice to a fine powder about a 1/8th cup and add to extend co2 production i wanna change least as possible cuz it take 14hrs to start to produce. If u keep a starter in ur fridge then 8 hrs . google brew yeast starter diy and diy co2! Also flushed thus week no florekleen just h20 with a little cal mg like 3tsp 5gal and pk 1tsp5gal. Clearing res nitrogen from veg and switch nutes. Peace and love and enjoy theres a treat this week in the pics!
Likes
6
Share
@Fonzi
Follow
Ich habe mit 2 Pflanzen Probleme von Anfang an. Eine Black Jack#1 zeigt genetische Probleme von Anfang an und zickt extrem. Die Sweet Amnesia#2 blüht extrem langsam.. die anderen zwei Pflanzen entwickeln sich normal und sehen besser aus