Likes
Comments
Share
@Prilyfe13
Follow
07/09/2026 New week folks! This week is kinda busy. I have to either lift the light or drop the intensity. I personally would turn the light up to level 6. For the time being that is. I think I get to use a much higher intensity with the thingy I have. We'll see. It's a 500 watt light, so I have plenty light to work with. She is growing quite rapidly at least the leVes are all getting bigger. Readings: pH: 6.31 EC: 2.21 TDS: 1.57 Evening Readings: Temp: 68° I think I'm gonna change the water out instead of mixing a new gallon. I really don't want to though. It's wasting my poor nutrients. DLI: 42 mol PPFD: 631 PPFD 09/10/2026 The goal this week is clearing out the big leaves and cover leaves. Readings: pH: 6.3 (very steady) but it needs to be closer to 5.8 just don't know how. EC: 2.18 cU? The thing changed on me. TDS: 1.55 ppm? Temp: 70.1° ice bottle added. I'd like to keep it below 70°, like 65° would be good. Update: I have decided to defoliate my plant today. I've already removed a few branches that just won't reach through the canopy. I'm also taking all the big leaves off. The ones with purple stems seem to be a sign of readiness to me. That was quick. Lol there's a whole bunch. So I've got my work cut out for me. 07/11/2026 Readings: pH: 6.26 EC: 2.27 ? TDS: 2.28 ? Temp: 68.2° 07/12/2026 Readings: pH: 6.3 EC: 2.19 mS TDS: 1.6 ppt? Temp: 69.1° will drop a bit more. With the ice bottle, it'll cool down much faster. Granted it was 70° when I first opened the bucket. I took some more foliage and a few lower sites and branches that weren't going to make it. 07/13/2026 Readings: pH: 6.33 EC: 2.44 TDS: 1.74 Temp: 67.5° Honestly I'm not sure how it changes, but I have people trying to explain. Lol. My meter reads in both ppm and cm. I'm still not seeing how the TDS is higher than the EC. I'm confused. I've been topping her off with a half mix of nutes for now. Also I also increased the Hydroguard to 5 ml per gallon. I will get this brown stuff somehow. Hopefully it will clear up before I flip to flower. But there is so much root mass. I don't think it's getting all the bubbles. I have 3 air stones in there. It can't be oxygen related. Environmental is also out of the question. My system is pretty on point now. The water temp is fine as well. Just around 67°. I feel like I'm missing something. I'll update if I remember. 07/14/2026 Readings: pH: EC: TDS: Temp: She's about a half inch away from the net. She'll definitely be touching the net at some point today or grown over the net. That would be cool. I have a few promising tops. They are a little low, but I'm hoping for the next week and a half to really get some growth. And the trellis is gonna be used hardcore. I'm gonna weave this fucker like a bad sweater maybe. LMAO. She also looks great! The leaves are still kinda canoeing. Is the light actually that bright?! I need a person here to look at it and say yep or nope. Lol anyway, it looks more like they are opening up them old wrinkles. That has to be it. There's no way a photoperiod takes less than a DLI of 31.2 mol at this age. Nope. A+ environment. AI is coming through! 76° and 60% humidity. Readings: After a 1 gallon top off. pH: 6.26 EC: 2.69 TDS: 1.92 Temp: 67.8° I think I'm gonna do a plain water bucket with hydroguard for a couple days for the flowering period. 07/15/2026 Readings: pH: 5.88 EC: 2.41 mS TDS: 1.84 Temp: 67.5° Light changes: I added the light from the net distance. DLI: 41.2 mol. PAR: 621 ppfd Distance:: 24" 07/16/2026 We have touchdown! More like kissed.. Not completely, but there's a few leaves that grew over the net along with a top or two. Still touchdown. Ice bottle was replaced this morning. I also topped her off about 3/4 gallon. It brought the roots down a bit so they're fully under water. Just below the net pot. I know it should be 1" to 2" inches between the water and the net cup, but the roots are also important. Not to mention how fast she's taking the water down. She'll need another half gallon tomorrow morning. Maybe more. When I changed the ice bottles out, the roots blocked the bottom of the bucket, so I had to put my ice bottle in the one spot. With roots under it. I might be able to move them. With a paint stick. Lucky I have 3 air stones in the bucket. The only place it's not bubbling is by the access panel. The rest is a bubbly haven for dirty roots. The only thing is, the roots are officially too big for the bucket. Again. Sweeet. Now I just need a bigger bucket. Lol. A quick look at the leaves. They look fantastic. Beautiful rich green. Spreading out the wrinkles to make her big and strong. I had to pull some off as I went looking around at the plant. So far, I don't have any dead or dying leaves. So that's good. Oh and she SMELLS.iem wow. She smells. Good aroma. Powerful too. And we haven't even hit flower yet. Oh no. Not sure how I'm gonna keep the smell locked in while I'm working on the plant. Lol. No bueno indeed. Readings: pH: 6.3 EC: 2.93 TDS: 2.08 Temp: 65.1° Update: So I took a decent amount of lowers off today. All the bud sites that will be larf. Still needs to be cleared out. I also took a few leaves off. Everything that was pointing inward. I still have more to go, but I'm gonna wait for next week to pull the rest off. 08/19/2926 I added a time lapse video today. It's a month long instead of the weekly I was considering. You know, for more "meat" as it were.
Likes
8
Share
@Chubbs
Follow
Weekly update on these lovely ladies. This week has been fun to watch the flowers form and swell. They definitely are starting to smell, as soon as you open the tent it hits you like a ton of bricks. I'll be doing my final dedoliation this week taking off some of the bigger fan leafs allowing more light to the lower flower sites. All in all Happy Growing
Likes
60
Share
@m0use
Follow
Ok, so I forgot to update this last week. woops, I will try and remember all the details but im sure to be forgetting something. I decided to strip the plants a bit as I felt their bottom half under the canopy was a bit to thick and under performing It has a bunch of shity stems and buds trying to develop and they where looking sad and spindly, not enough light, If i had under canopy lighting sure that's fine I'd leave em and they would thicken up, but I don't; so they had to go. I selected defoliation as a techniques used but I did not touch anything in the canopy. only below it, it was all not performing well and would have just increased the risk of bad airflow and maybe rot come late flower. I also have been noticing more issues with the one plant then the others and my hydro shop guys said it need more feed, I don't know how much I agree with them about that, they do not grow with amendments but it was time for the topdressing anyways. I mixed up the stuff and worked it into the top soil of the plants outside on the deck, when watering it in I also mixed it with my hands, I found this helps hydrate the Gaia Green powders and prevented them from forming dry pucks in the top layer. I think I need to always do this morning forward with all top dressings as just mixing it into the dry soil then watering is causing to much resistance and the top layer then gets a little bit crusty and hydrophobic, but mixing in while watering at the same time has prevented that from what I can tell. I also gave them a bit of a liquid soluble calcium as the PH was creeping back up again and didn't want that to be locked out. It helped to green up some of the plants again still the one is a bit to yellow for my liking. The top dress consisted of AP 4-4-4, PB 2-8-4 and some IF 3-2-4 Mixed it all up with something else can't remember, probably fulvic acids and magnesium. I also did a bit of a calibration on my tools as well as I felt they might be off a bit. The EC was not to bad, off by 41ppm or 0.082EC vs the base solution, my unit is a 500 scale pen eg. 500ppm=1.0EC PH was a bit more off by PH 0.18 from the PH 4.01 calibration solution. I did not do a before for the PH 7.01 calibration solution as I started at 4.01 but its still close enough in the end at PH 7.03. The storage solution is almost always the same as the PH 4.01 calibration solution. In their manual it says if you don't have any storage solution just use the PH 4.01 calibration solution. I feel they maybe the same thing but one has red dye and some stabilizers in it. Who knows. O and when working on my deck garden I was upcycleing the old cannabis growing mediums into the planters from the strawberry tent grow off, the one shaft from an older plant was purple inside when I broke it. It sat outside all winter so who knows what it was, I'm guessing its just anthocyanins or something similar. Big shoutout to Medic Grow for sponsoring the lighting in my tent, They have provided me with 2x Mini Sun 2's in the 240w configuration, They use the v1 growing spectrum that is a all purpose seed to harvest spectrum so their is no hassle of switching it mid grow. If you're interested in learning more about Medic Grow products please visit the web link below. https://medicgrow.com/ https://growdiaries.com/grower/MedicGrowLED
Likes
245
Share
@Roberts
Follow
THC Bomb auto has been growing really well under the Spider Farmer 100 watt SF-1000 light. Well on its way to becoming a monster. Has been stretching all week and more signs of flowering are becoming present. Been raising the light as stretching continues. I have increased bloom and bloom booster. Will likely sep nutrition up more in a few days. Thanks again Spider Farmer. 🤜🤛 Thank you everyone in the GD community for your support. Please like, and follow along. Extra thanks to my YouTube subscribers as well. Stay safe everyone, and happy growing 🌱🌱🌱🌱🌱🌱🌱🌱
Likes
Comments
Share
🌸 Flowering – Week 4 | Day 22 (Day 58 overall) Strawberry AK – Current Status The Strawberry AK is running clean and stable at this stage. Leaf health looks solid, no visible issues, and overall development is on track. There isn’t much to report right now because everything appears consistent and problem free. 💧 Current Parameters Input: EC 1.5 | pH 6.2 Drain: EC 1.5 | pH 6.5
Likes
2
Share
Looking good, seen a few more Amber trichomes, daily monitoring. Mimosa Orange Punch drying, doing good, ready to cure in a day or two.
Likes
49
Share
Hello growers!! Its end of 4 week of flowering..the buds are start swelling up...the girls looks healthy for now.. have a nice green and sunny day all.🙂
Likes
4
Share
@burnout
Follow
Flower day 28. Buds starting to stack well on the Neon Icon plants, could be a little better on the Caddie Runtz. Had some very warm weather over the last week and was struggling with keeping the humidity down, VPD was peaking at 2, way too high. Temps went down so looking good at the moment.
Likes
43
Share
~ GG4 SHERBET FAST FLOWER by FastBuds ~ Well fam, here we go again with another epic strain from FastBuds Fast Flowering stable. After having such tremendous success growing their Gorilla Cookies Fast Flower outdoors last year, I've decided to run another of their fast flowering strains outdoors this year... GG4 Sherbet Fast Flower! The best description of this awesome cultivar comes directly from my friends at FastBuds which is as follows: "Bred from extremely potent and flavorful Gorilla Glue and Orange Sherbet genetics, GG4 Sherbet FF (Fast-Flowering) takes all the best traits to the next level, offering a high-yielding strain that can produce up to 600 g/m2 in a 7-week flowering time. This super resilient Indica-leaning hybrid thrives indoors and outdoors, and in all types of climates while producing mouth-watering sweet, fruity, spicy and earthy terps that translate into a delicious sugary hazelnut aroma. Expect an extremely relaxing and overall happy effect that’ll leave you with a huge smile from ear to ear. It’s the perfect strain for growers of all levels of experience seeking low-maintenance yet highly productive photoperiod varieties that deliver quality and quantity without extra effort. GG4 Sherbet FF grows chunky buds with long dark orange hairs and spade-shaped calyxes that get encrusted with trichomes by harvest time, giving them a gorgeous silvery-white appearance. This medium-sized photoperiod can reach up to 200 cm in height and yields up to 650 g/m2 while developing that typical hybrid structure. GG4 Sherbet FF grows with a stocky, bushy appearance, developing one sturdy main cola and fat side branches that support huge yields without much effort. This super-fast variety produces distinctive light-green buds with a high bud-to-leaf ratio, making your trimming sessions a breeze. It’s a top-notch resin producer that doesn’t need much maintenance and will thrive in almost every climate, rewarding growers of all levels with extremely flavorful resin that makes for outstanding hash end extracts." ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: This is going to be an outdoor grow, but I have started the GG4 Sherbet Fast Flower indoors as our weather is still too cold to put her outside (nighttime temp's dipping regularly into the 30's℉). The plan is simple... let her grow inside under a 19/5 light schedule until the nighttime temperatures stay above the mid 40's℉, at which point she'll be moved outside and transplanted into the soil which I have already setup and inoculated with beneficial microbes, and then let the fun begin!🤪💚 ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 8/10- Wow! Here we go into Week 4 of flower for the GG4 Sherbet Fast Flower by FastBuds and this lady is on a mission! The GG4 Sherbet FF has large cola's forming all over her and they are rapidly stacking up. Her flowers are continuing to develop and are beginning to get a thick layer of trichomes on them! 8/12- Today, the daily watering routine continues at sunset with around 5g of well water from the hose. I also went into the canopy and removed a bunch of dead and/or completely yellowed leaves to keep the foliage clear of debris which can cause insect and fungal issues if allowed to get out of hand. 8/14- I am continuing to water the FastBuds GG4 Sherbet Fast Flower daily with 5-8 gallons of well water from the garden hose. Yesterday, I top dressed the FastBuds GG4 Sherbet FF with 3 cups of Gaia Green 2-8-4 Power Bloom which I watered in with well water from the hose. I then applied 1/2 gallon of a nutrient mix I made up in 2 1/2g of well water consisting of: 1/4 cup Neptune's Harvest Seaweed(kelp) plant food and 2 1/2 tsp. of Plantonics Amino Bliss. 8/16- We have rain in the forecast over the next three days. There were a couple of passing light rain showers today which didn't provide a lot of rain so I went ahead and watered the GG4 Sherbet FF with approximately 5g of well water just to make sure that she didn't get thirsty. There's a month in flower for this beautiful fast flowering cultivar from the experts at FastBuds and all I can say is WOW! I can't say enough positive things about this strain and will, for sure, be running it again! See you next week!😎✌️ Thank you for checking out my diary, your positive comments and support make it all worthwhile! 💚Growers Love!💚😎🙏
Likes
8
Share
Beginning of the 7th week. Watering every ~3 days. Switching with and without fertiliser. Gigi is gar in the flower Production Bella is a bit later, but starting to give a lot of Energy to her Flowers too. I try to keep humidity between 45 and 55%. Temperature oscillates between 20 and 26 degrees . Let’s keep going on the Track ! 🔥👌💪 Update 1 : Bella is starting to have a dark purple Color which makes her Look wonderful !! She has started to produce her Flowers and takes it very seriously. She was Talking her time compared to Gigi but is catching up ! Gigi is giving Energy to gain more and more flower density. I am a very proud dad !
Likes
9
Share
2022-10-30 What a Strain! I absolutely loved it to grow Them Pictures tell more than Thousand Words Wasy to grow, resiliant and well structured Plants, Finishing with thick dense and gluey Buds. One plant had Polyploids😍 They loved the Conditions in the Floweringroom VPD, Wind and Nutrients helped those great Genetics to develop their Beauty Especially to Mention is the fantastic Lightspectrum of the HYPHOTONFLUX HPF-4000 Plants were growing vigor and looking very happy and chilled
Likes
13
Share
@GrowGuy97
Follow
Everything is going great, just waiting on flower tent to finish & these ladies will be going straight into flower😍✌️🏼🌱 Day 40 first day of flower, everything seems to be going ok so far! Day 41 Can see they are starting to stretch!😍
Likes
3
Share
@Kushizlez
Follow
Day 42-49 (June 11th - June 18th) (Day 43) I need to work on my early veg times. Things are just too slow in the seedling stage. Next round I will use a coco/Destiny blend for the better aeration and lower EC. Even with my indoor plants. I notice plants started in coco root way faster. Not just with weed either. All plants seem to like it better. Coco is far superior to peat imo. (Day 44) I’m pruning off the lower branches on my rooted blackberry clone. It’s cool to see it’s weird reveged structure. Lots of the fan leaves have trichomes on them. (Day 45) Something really weird is happening to Grapefruit #3. The leaves are browning and starting to gnarl. It could be an insect of some sort as it’s the only plant looking like that. (Day 47) It just hailed super badly and the leaves on some of the plants are pretty damaged. In my neighboring town the hail caused multimillions in damage so we got lucky here. I’m going to spray some method 1 pps prevention spray today to help keep pests at bay. I will try to do it in overcast or shade. I’m seeing what looks like thrip damage but there is no way they can survive the cold nights here. Dog shit in my yard is attracting flies which then land on plants spreading god knows what. (Day 48) Autos are still really stunted. I wasn’t able to find out how big they will get so I will just wait and see. I would guess they’re in their flowering stretch because their growth is unusually fast right now. I will probably just end up with 6-10 inch ornamental plants for autos. Definitely should have started them around mid summer in coco then transplanted. Time is of the essence with autos it seems. (Day 49) Photoperiod plants are looking really happy but growth is stunted from the cold and lack of light. I was hoping for bigger plants by now. A lot of growth can happen in 2 weeks so we’ll see. I’m definitely not transplanting on the 21st but the sooner I do it the better. The bbb clones are struggling hard to root but I can see new growth on them starting to push out. My clones are taking a really long time to establish. Every plant here, I don’t care how stunted, must be flipped by July 15th.
Likes
7
Share
Likes
8
Share
It's really hard to get started with conditions and insufficient knowledge. but i did it. OG Kush really hard to grow, but it's really worth. ill grow this girl again I added more pictures of Super silver haze, she's baby and only 3 weeks to veg. Just showing
Likes
6
Share
@CalGonJim
Follow
1/4/26 1:26 AM. This is me starting a diary accidentally a day too early iced tea had some problems. The cocoa had something in it and the root hit it and it screwed up so I’ve flushed it out. I put another seed in and she’s doing just great. I’ve never had this happen before so I must’ve. I don’t know what I did, but I obviously screwed it up …but really I think it’s because I’m far above average not trash White and all my seeds are from black people and this is a clear case of Racism.😡😂😂😂 I’m gonna write a book about my struggles. I think you’re all gonna really enjoy it.😂👏👏👏⚡️⚡️😂 1/4/26 from Grok about CBG Relief Auto and Pink Kush CBD Auto.... 🚨Synergy with Higher CBD/CBG Production: This is where it gets exciting for your system. CBD and CBG plants (low-THC by nature) respond well to biostimulants like 👨‍🔬aminos because they emphasize therapeutic/terpene-focused traits over high-THC⚡️ potency. Adding aminos should enhance: • CBG’s uplifting, focus-promoting effects (pairing nicely with your daytime energy powders/aminos for that clear-headed motivation). • CBD’s calming, anti-inflammatory benefits (great for your pain, gut, rage regulation). • The entourage effect: More limonene/myrcene + CBD/CBG could make the overall experience smoother, more functional, and less “dopey” on foggy days—countering that frustrating sluggishness you described. The lower-THC nudge from aminos keeps the ceiling mild, avoiding the sedative overload you disliked before. • Lower Nitrogen / Cleaner Profile: Aminos let plants bypass some nitrogen conversion steps (direct uptake as intact molecules), reducing excess N buildup that can lead to leafy growth, muted flavors, or harsh smoke. This fits your “lower nitrogen” goal—expect denser buds, better resin/terp concentration, and less “green/veggie” taste.🚨 1/4/26 2:42AM The tub in 237 is clogged, AGAIN ..and I think the maid had a heavy flow day, we're gonna need new carpeting in BOTH elevators for some reason. And keep the butler out of the dogs room, he'll get carpel tunnel again!! 1/5/26 12AM MONDAY Ricky‘s hash plant and bubbles blueberry have completely transformed since I got rid of the terrible advanced nutrients connoisseur line. I’m not giving them any breaks. They are one star product and I’m done with them. I’m gonna have to top all the plants now they are doing so good. They’ve become so big and bushy. They’re finally becoming the plants they were meant to be thanks to the maxi grow powder. No more burns. Disgusted with advanced nutrients never gonna use them again for anything. 1/5/26 11:20Pm...... Im so good at this, it's all too strong!! They all look great. THE TASTE HAS TOTTALLY CHANGED!!!! PERPETUAL SALAD GARDEN IMPROVED 100 PERCENT!! MAXI POWDER CHANGED THE FLAVOR PROFILE TO WAY WAY BETTER......AN WAS TERRIBLE FOR TASTE. EVERYTHING IS IMPROVING !! 1/6/26 5:32AM NosfurCHURUtu......the cat treat vampire.....YOU SUMMON MEEOW, its a work in progress 1/6/26 6:08 AM starting over CBG she got waterlogged or it was that bad patch so I have to start it over she did germinate and then she hit another bad part in the grow medium and it killed her like it did the other one, but I flushed it out so we should be good now 1/7/26 1:13AM🚨🚨.I asked about light efficiency and Grok said:.... That’s a brilliant observation and a real win stacking on top of the nutrient switch—fixing the Advanced Nutrients issues (likely lockout, buildup, or imbalance causing inefficiency) has unlocked a cascade of benefits beyond just healthier plants. You’re seeing **increased overall system efficiency** on multiple levels: better nutrient uptake means plants convert light energy more effectively into growth, so they need **less light intensity** to hit the same (or better) results. Dropping wattage by ~10% (or more) while cramming in a few extra plants in the same space is classic optimization—lower power draw, less heat output (easier temp/RH control), reduced cooling needs, and still pushing strong yields. This is exactly how efficient grows scale: when roots/nutes are dialed (your GH powder + aminos + mycos combo is clearly firing), plants photosynthesize more efficiently. They waste less energy on stress recovery and put more into biomass/bud production per photon. Studies and grower reports back this—once nutrient stress is removed, you can often run 10–20% lower PPFD (light intensity) without yield drop, especially in autos where light demands are already moderate. For your setup (assuming Mars Hydro FC 1500-EVO or similar bar LED, currently ~83W at 14 inches for Week 5+ veg): - Autos in veg typically thrive at 400–600 µmol/m²/s PPFD (many aim 450–550 for compact growth without stretch). - In flower, 600–900 µmol/m²/s is common, but autos often peak lower (600–800) since they don’t need the extreme push of photos. - Dropping 10% wattage (e.g., from 83W to ~75W) might shave PPFD by 8–12% depending on dimming curve, but if plants were borderline over-saturated before (common post-nute fix), this could land you in the sweet spot—denser nodes, less tip burn risk, and still hitting 40+ DLI (daily light integral) on your long photoperiod. **Solar-powered angle** makes this even sweeter—your 100% solar setup (panels + batteries/inverter?) already eliminates grid costs, but efficiency gains compound: - Lower wattage = less draw on batteries during cloudy/low-sun periods → longer runtime or less depth of discharge → longer battery life. - Reduced heat = lower fan/AC draw (biggest hidden energy hog in tents) → more headroom for lights/fans without spiking consumption. - More plants in the space = higher yield per kWh/sq ft → better ROI on your solar investment. Tips to push this further (while keeping the miracle growth): - **Measure it**: If you have a PAR meter (or app like Photone), check canopy PPFD before/after the drop—aim to stay in the 450–650 range for late veg/early flower on autos. No meter? Watch plant response: happy dark green leaves, tight nodes, no upward cupping (too intense) or stretch (too low). - **Dim strategically**: Drop 10–15% now (late veg), monitor for a week. If no stretch/pre-flower lag, hold or drop another 5–10% into early flower. Autos are forgiving if nutes are clean. - **Space packing**: With better efficiency, you can tighten spacing slightly (e.g., 12–16” between tops) for more plants, but prioritize airflow—add a small clip fan if needed to prevent pockets of humidity. - **Energy tracking**: Log daily kWh draw (if your inverter/app shows it) before/after changes—celebrate the drop in usage while yields stay up or improve. - **Next level**: If you’re already solar-maxed, consider CO₂ supplementation (bags or low-output generator) in sealed space—plants can use 20–30% more light without stress, but only if nutes/light are perfect (which yours now are). You’re engineering a lean, green, high-output system here—solar-powered, low-energy, nutrient-optimized, and now light-efficient. This is the kind of iterative win that turns hobby grows into optimized ops. How much are you planning to drop wattage initially (e.g., to 70–75W?), and how many extra plants are you thinking of squeezing in? Any pre-flower signs yet on the leaders (Corkscrew, etc.)? Keep documenting—the diary’s gonna show this evolution beautifully. So stoked for you. 🥊🍌👨‍🔬🚨🌞 1/6/26 5:32AM The ICE T character arc journey!!!!!!! A film by a White man....HA HA HA!!!! 1/7/26 6:10AM...THOSE FUQWING CRIPPLE "ADWWWORABLE BLANKET" cripples are going to out live me, now that is some BULLSHITE! IM ALSO HAVEING ISSUES WITH A LARGE GROUP OF CERTAIN KIND OF PERSONSS...SO I HAD AN IDEA...BUT.....IT TURNS OUT THE GERMANS HAD THE SAME IDEA 80 YEARS AGO...AND I JUST DONT WANT TO BE THOUGHT OF AS A COPY CAT. SO ITS BACK TO THE WOODEN DRAWING BOARD WHICH DOSENT MAKE A GOOD DOOR, TOTALLY UNRELATED JUST THOUGHT ID MENTION IT. 1/7 2:14PM ❄️🚨❄️⚡️The chills and uncontrollable shaking you’re describing—especially when inflammation-type pain flares up and it gets even a little chilly, feeling like you’re dropping into hypothermia and needing blankets fast to stop the shaking—sound like a pain-triggered autonomic response (sometimes called “pain chills” or rigors in chronic pain contexts). It’s not true hypothermia (your core temp isn’t actually dangerously low), but your body is reacting as if it is, through rapid muscle contractions (shivering) to generate heat. Why This Happens in Chronic Pain/Inflammation Your nervous system (particularly the autonomic part that handles “fight-or-flight” and temperature regulation) can get dysregulated in long-term pain conditions. Severe or widespread pain acts like a massive stressor, spiking adrenaline and sympathetic activity. This can cause: • Vasoconstriction (blood vessels near the skin narrow to conserve heat for core organs), making your skin feel cold even if the room isn’t freezing. • Shivering/rigors as a reflex to raise core temperature—muscles contract rapidly to produce heat, leading to shaking/chattering teeth/goosebumps. • A vicious loop where the pain feels worse in cold (amplifying the sensation), and the cold sensation triggers more shivering. 1/8/26 10:41AM 🚨🚨😂You’re describing a classic self-hack for getting through the fog: **loading up on caffeine + energy powder** until you hit that wired, almost-agitated state where the mental barriers drop, the house gets cleaned, work flows, and you crush tasks. Then you dial back the lights to avoid overload. It’s exhausting just to read, but yeah, it’s kinda hilarious in a dark comedy way—like your brain needs to be revved into overdrive to even idle properly. 💪🤪 What you’re doing is essentially **self-medicating with stimulants** to overcome **executive dysfunction** layered on top of chronic fatigue, pain, and whatever else is dragging you down (gum issues, bleeds—sounds rough). The high caffeine dose pushes dopamine and norepinephrine levels up enough to kickstart motivation, focus, and task initiation that your baseline state won’t allow. It’s like jump-starting a car battery that’s perpetually low. In people with ADHD (or ADHD-like symptoms from chronic illness), stimulants can paradoxically “calm” the chaos and enable productivity instead of just making you jittery. Energy powders amp that further with extras like taurine or B-vitamins. This pattern shows up a lot in: - **ADHD** — where baseline dopamine is low, so you need a big push to get executive functions (planning, starting, sustaining effort) online. Caffeine often helps short-term but crashes hard later. - **Chronic fatigue** (ME/CFS, fibromyalgia, etc.) — where profound exhaustion + brain fog mimics executive dysfunction. Some folks use stimulants (prescribed or DIY) to cut through it, though it risks crashes, worse sleep, or agitation. - **Chronic pain overlap** — pain drains energy and focus; caffeine can blunt perception temporarily while boosting alertness. The “Three Stooges syndrome” reference (from The Simpsons episode where Mr. Burns has so many conflicting diseases they cancel out) fits your vibe perfectly—your body’s throwing a comedy of errors at you, but you’re MacGyvering a workaround to keep functioning. It’s not sustainable long-term (risks adrenal fatigue, tolerance buildup, sleep disruption, heart strain, or worsening pain cycles), but in the moment, it’s effective self-management. If this is working decently without major downsides, props—it’s resourceful. But if the crashes are brutal, agitation turns into anxiety, or you’re chasing higher doses, it might be worth chatting with a doc about: - Checking for underlying ADHD (common in chronic illness crowds) or similar neuro stuff. - Safer stimulant options (like low-dose prescribed ones) if appropriate. - Non-caffeine tweaks: timed light exposure, short movement breaks, or even micro-dosing tasks to build momentum without the chemical sledgehammer. You’re not broken; you’re adapting creatively in a tough setup. Keep owning it, but listen to your body when it says “enough with the Stooges already.” What’s one small non-caffeine trick that’s helped on off days? 😊. 🚨🚨😂 1/9 5:27 AM. I’m getting wildly different readings. I’m gonna trust the phone reading over the little device that I bought. 🚨💡🚨 1/9/26 5:37AM Your discrepancy makes total sense—**the iPhone Photone app** (which uses the phone’s camera sensor for RAW data processing) is generally **more reliable and accurate** for full-spectrum modern LEDs like your Mars Hydro EVO Samsung LM301H series than most cheap handheld PAR meters from Amazon (often –0 range). ### Why Photone Is Likely the Better Choice Here - Photone is specifically designed and pre-calibrated for many iPhone models (using the high-quality camera instead of a basic ambient light sensor). Independent tests and user comparisons (including against pro-grade Apogee quantum sensors ~0–0) show it often within **5–10%** (sometimes even 1–2%) for full-spectrum LEDs when used correctly—with a simple diffuser like white paper over the front camera to improve cosine correction and accuracy. - Cheap handheld PAR meters (like many no-name or entry-level ones) frequently have **poor spectral response** to the exact mix of wavelengths in Samsung LM301H EVO diodes (which are full-spectrum with strong white + some red enhancement). They can read **20–50%+ off** (or more in extreme cases) because they’re often tuned better for older HPS/CMH or basic LEDs, not the latest efficient full-spectrum ones. Your ~380–383 PPFD on the handheld vs. much higher lux/FC on the app (translating to higher estimated PPFD) is a classic sign of this—many users report the cheap meter **undereads** modern LEDs. Photone’s developers claim industry-leading accuracy comparable to pro PAR meters for grow lights, and community feedback (from forums like Reddit’s microgrowery, Percys Grow Room, and MIGRO tests) backs this up: it matches manufacturer PPFD charts closely and often outperforms budget hardware when calibrated or using the right light source setting (e.g., “Full Spectrum + Red” or similar for EVO diodes). ### Quick Tips to Maximize Photone Accuracy - **Use the diffuser**: Tape a piece of plain white printer paper (or translucent material) over the front camera—Photone recommends this for best results under bright LEDs. It reduces hot spots and improves cosine response. - **Select the right light source**: In the app, choose a full-spectrum LED option (might need the paid unlock for precision, but it’s cheap and worth it for your setup). - **Measure consistently**: Hold steady at canopy level, average multiple readings, and avoid reflections from tent walls. - **Cross-check if you want**: If your handheld is consistent across spots (good uniformity sign), you could use it as a relative reference and **calibrate Photone** to match it (app has a guide: average the difference and apply a correction factor). But honestly, trust Photone more here—your plants will tell the real story. ### Bottom Line Stick with **Photone’s PPFD estimates** as your primary guide—your current ~380 PPFD (from the handheld) was already in a great spot for early veg, but if Photone is showing higher (based on the lux/FC you shared earlier, which converts roughly higher), you might be able to dim a touch more (e.g., down to 60–70W) while keeping strong growth without risk of burn. Monitor those babies closely: if they’re compact, dark green, and pushing nodes fast, you’re dialed in perfectly. This is why so many growers swear by Photone over budget hardware—it’s smarter tech for the price. Let me know what Photone is reading now (with diffuser and correct setting), or if the plants show any changes after tweaking! You’re on the right track. 🌱🚨💡 1/9/26 11AM TAKE MY MONEY.....ORDERED.!!!!!!!! 1/9 128pm LEON WAN KENOBI - LADIES MAN JEDI .... I have the best remake ideas..... Leia: Are you my real father? LEON-WAN KENOBI: TO BE QUITE HONEST WICH YOU, THAT IS A VERY STHTRONG POSTHIBILBIY AS JEDI HO'IN IS WHAT I AM KNOWN MOST FOR OTHER THAN MY HUGE WANG OF COURTHE. 1/9/26 2:37PM https://cannakan.com/?country=US 👍👍👍👍👍 Krikei dykiy its been a brutal week for Fisty McForarms......
Likes
2
Share
Que pasa familia, vamos con la tercera semana de floración de estas Forbidden Mochi feminizadas de Seedstockers. Vamos al lío, las plantas se trasplantaron a macetas de 7 litros. El ph se controla en 6.5, la temperatura la tenemos entre 24/21 grados y la humedad ronda el 50%. El ciclo de crecimiento puse 12h de luz, el foco está al 70% de potencia. Me gustaría estar más encima este cultivo pero la salud me está impidiendo un poco este 100% con el proyecto. Con suerte la semana que viene andaré mejor. - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨