Likes
Comments
Share
Zdravím týden je zase pryč, startuju 4. týden květu, po defoliaci se Apollo krásně vzpamatoval, povyskočil o 4cm žádná sláva😆, ale krásně se roztáhl po celým stanu, když se něco neposere predikuju zase fullhouse.😊 Zálivku jsem zvedl na 7L výtok 1500ml (21%). Ph. 6.0 Vlhkost 55% Candyho a Big Bud jsem zvýšil na 3ml a zatím žádnej problém naopak docela mu šmakuje. Big bud budu ale nahrazovat, objednal jsem Carbo Load od AN chci vyzkoušet co to dělá😉 Přihazuju fotky a videjko z 18.8. enjoy Za týden čau👋 ať se vám daří.
Likes
13
Share
@gadjoo
Follow
🔵⚪️🔴 Quand est-ce que la plante va arrêter de grandir ? La légende dit "Jamais". Je ferais la défoliation cette semaine je pense. Le bio-filtre est installé. Je monte l'engrais Bloom à 4ml/L. Pulvérisation du "Blooming H", un stimulateur de floraison, hâte de voir le résultat, surtout vu les prix des boost chez cette marque. J'utilise un "nano spray gun" pris sur Aliexpress pour 13€. Le PPFD va de 400 pour les têtes les plus basses à 1500 pour les plus grandes. J'espère que les photos vous plaisent ! 🦅​🇺🇸​/🇬🇧​🦁​ When will the plant stop growing? The caption says "Never". I will do the defoliation this week I think. The bio-filter is installed. I increase the Bloom fertilizer to 4ml/L. Spraying "Blooming H", a flowering stimulator, looking forward to seeing the result, especially given the prices of boosts from this brand. I use a “nano spray gun” bought on Aliexpress for €13. The PPFD ranges from 400 for the lowest heads to 1500 for the largest. I hope you like the photos!
Likes
44
Share
We have a stand out! There is one beautiful girl that is showing some beautiful colour, structure, frostiness, and fade ❤️ they are all very dense and frosty but this one girl has stolen the show. I cut their nutrients to almost nothing after running phd water for two waterings consecutively, still a few more weeks to go. I’ll be starting my routine soon if just phd water, but in a slightly higher volume to start breaking up any pockets or salts that may have been forming. Thanks for stopping by, won’t be long! 🇨🇦❤️👊
Likes
44
Share
@RakonGrow
Follow
Note: jegliches Equipment findet ihr in der Germinations Woche . Day 22: PPFD 410 * 20h = DLI 29.52 Day 23: Day 24: + Dünger + + 0.5 Flaschenwasser + + + Rhizotonic + + + Terra Vega + + 0.6 Leitungswasser + final PH 6.5 Day 25: Day 26: Day 27: + Flaschenwasser 2.5 L (PH 7.2 EC 0.26) + + CanaCym + Final PH 6.1 = Drain : EC 1.325 Sieht bissel danach aus als hab ich etwas zuviel Urgesteinsmehr in die Erde eingearbeitet :)) Muss ich halt bissel spaarsamer mit der Düngung umgehen . Day 28: Das Wetter und die liebe Luftfeuchtigkeit :(( Manchmal denk ich das ich Outdoor growe :)) Im Video sieht man schön wie der kleine Zwerk sich selber mit seinen riesen Blättern SCROG mäßig den Wuchs in die Breite erzwingt :)) Die Blütentriebe müssen halt den Weg zum Licht mit aller Anstrengung erreichen .
Likes
105
Share
Overall growing cycle of this strain was absolutely fenomenal, the training i did on her paid out really good coz it got me close to a hundred grams dry on a 60 cm automatic plant. She handled nutrients and lst very well, i never topped her, all that branching was caused by LST.
Likes
10
Share
@BudBeat
Follow
Die Deadryder hat früh die Blütephase eingeleitet! Ob so gewollt? Es kommt mir so vor, dass sie aufgrund der kurzen vegetativen Phase nicht wirklich Blattmasse aufbauen konnte. Schaut eher aus, wie ein kahler Tannenbaum 😜. Blüten entwickeln sich auch schon rasch und werden sogar schon ein wenig lila. Na da bin ich aber echt gespannt!
Likes
12
Share
I'm very happy with this grow. It has shown me a lot and I even got to figure out things I was doing "wrong" and what I can do to improve yield. I'll have to apply this on my next grow. Stay tuned :)
Likes
4
Share
@Jabbamo
Follow
_____________________________________________________ Mi. 15.4. "Spülen" (letztes Gießen) - 3,2 Liter pro Pflanze gegossen (minimal Drain) - 1L Nährlösung per Hand angegossen - 8L Nährlösung per Gießsystem - 0,5L klar spülen zur Systemreinigung 1,2 ml / Liter "Calmag" (Zellschutz & pH-Stabilisierung) Ph 6,2 - Toplight Leistung auf 40% verringert _______________________________________________________
Likes
7
Share
Fall colors are coming in fairly intensely. Growdiaries won't let me post everything on here. Follow me on YouTube @AestheticGenetix I have playlists of every plant from start to finish with some longer content that I can't post on here
Likes
39
Share
Half gallon nute feed. Trichomes still a little glassy. Dense budding 👌🏾. 60-65 days for both ladies will open the window. Flushing soon.
Likes
198
Share
@DevilsBud
Follow
FLOWERING STARTS In the the new marshydro set-up 120x120x200 4'x'4 FC-4800 lamp Pubes are showing on all of them happy days in the absolutely amazing marshydro tent 👌🏻💯👌🏻 and no balls in the room yet so that's good at least i know that first grow i had issues with hight but with my 120x120x200 that not going to be end problem so stretch like ya never stretch before 💪🏻 i am prepared now lol the FC-4800 is a beast and still tweaking hight dimmer don't want to burn them but also want to utilize the lamp as much as I can but will get under control 🤘🏻😎🤘🏻 1/11/21 Did some last defoliation and spread the plants out bit Tru the tent got lamp dialed in dimmer around 55% and hight around 45cm above the plants and every week will bump up the dimmer with 5% they are looking very good healthy and i am very proud of the results so far gave the proper nutrients and the normal watering in between everything cool in the hood Will be updated soon happy growings Growmies visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
1
Share
. 🌱 : 💧 : 4l day 73, 4l day 76 💡 : Dli: 45 mol/m²/d 🤔 :
Likes
4
Share
@DRO420
Follow
2nd week of Flowering started , pics shown are results from 1 week of flowering. As we roll into week 2 of flowering I have decreased the humidity slightly to 45%. I slowly introduced the lotus "bloom" nutrients switch from the "grow" solution. Plants are healthy and shoots are sprouting up fast preparing for buds. Installed a 3rd net for support only , the first 2 nets are for screen of green purposes and to train the plants. Next week I will do another defoliation of every leaf below the 2nd net. I do not defoliated during the first 10 days of switching to flower cycle , because this is a crucial time when the plants do a final grow and stretch to the light. If you stunt them during this time by defoliating then yield will be lower.
Likes
7
Share
@Oyziphar
Follow
🌞 Lovely summer weather again this week with excellent temperatures 🌡️🌡️🌡️ ➡️➡️ The buds have become hard, the smell is strong 👃👃👃 ➡️➡️ Plant #1 is the biggest plant and probably the best yielder. She is a bit leafy, so maybe a bit less tasty ➡️➡️ Plant #2 a bit smaller plant, but also a beautiful plant. Probably a slightly lower yield ➡️➡️ Plant #3 also a bit smaller plant, but lots of trichomes and therefore very white appearance. Open plant with not many leaves in the buds. Beautiful plant and perhaps the tastiest and with the most high effect Seventh week of Light Deprivation 👉👉👉👉Every morning at 9:00 am I move the plants to the greenhouse. 👉👉👉👉Every evening at 9:00 pm I move the plants (together with some other strains) inside the growroom (which I don't use in the summer) 👉At the beginning of this week I boost the plants with gift of water enriched with OPF 7:2:3 ; Fulvic 25 ; Yuccah ; Biovin liquid ; Earthworm compost extract. This will be the last time. From now on only water 💧💧💧 ⭐Big Thanks to Luc from Plant Health Solutions / Bioplantenvoeding dot nl ⭐ Plant #1 ; height : 154 cm Plant #2 ; height : 138 cm Plant #3 ; height : 136 cm
Likes
Comments
Share
I start by saying that the genetics of this fantastic and super plant, the only exemplary because I was given after ordering, the first time I cultivated this variety .. I never had any problem from germination at the end of harvest, made grow for 6 weeks approximately with light hours 18/6, then kept in bloom for 10 weeks ...... and from about 10 days to dry with temperatures between 19/20 degrees, and humidity rate to 50% between today and tomorrow I'll make a nice manicure.
Likes
48
Share
Sorry for the late update. It's been a hectic week at home and I barely had time to do the basic work. Bit of a nightmare also. These Pinapple are flying along and probably have 2 mabey 2,1/2 weeks left until harvest. I'm now getting leaf damage on both plants despite keeping EC below 1.8 at all times. Really cant put my finger on it but I've decided just to let them run out and ill try and be more thorough on my next attempt with this strain. Really happy with them despite that and bud structure is looking really great.
Likes
26
Share
Big week! I got my new EarthBoxes and a bunch of goodies. I picked up the Probiotic Farmer's Alliance kit from BuildASoil, so I also got some EM-1, Kashi Blend, dolomite lime and Malibu compost. Alongside that I picked up Colorado Worm Compost (vermicompost), Gnarley Barley (malted barley, corn and hemp) and Craft Blend (aprox 3-5-2 organic mix). Unfortunately there was a bag of soil missing, so I ended up using my own mix though I am somewhat scared of it being too clay-heavy for the SIP. I inoculated with EM-1 and began fermenting a batch of activated EM-1 to make the bottle last longer. It looks about a week from LST, after that I hope to set up a two-tier SCROG setup and begin growing the bushes. I will begin spraying AEM-1/EM-FPE/EM-5 alternatively once a week for IPM, I will try to avoid using neem this round (unless I find this approach lacking). I also brewed a batch of EM-FPE with aloe that smells incredible, I can't wait to give it a go.
Likes
9
Share