Likes
Comments
Share
📆 Semana 8 Los cogollos continúan endureciéndose y ganando densidad, mientras la maduración avanza de forma evidente. La producción de resina se mantiene muy elevada y los aromas son cada vez más intensos. Los pistilos siguen oscureciéndose y replegándose progresivamente, y comienzan a aparecer tonos morados en las flores y algunas hojas, aportando una coloración espectacular a la planta. La planta mantiene un buen consumo de agua y nutrientes, mientras el objetivo pasa a ser acompañar esta fase final de engorde y maduración manteniendo una EC estable y evitando excesos. ⚡ EC: 1.7–1.8 💧 pH: 6.2–6.5 🌡️ Agua: 20–21°C 🌫️ Humedad: 40–45% 💡 Intensidad: 950–1050 PPFD 🔥 Nota de cultivo: En esta etapa la prioridad es mantener unas condiciones estables, buena ventilación y una humedad controlada para favorecer el endurecimiento de los cogollos, la producción de resina y la expresión de sus intensos colores morados. ¡Seguimos creciendo fuerte! 💪
Likes
11
Share
@MrLahey
Follow
Pulled her at day 55 of flower which is earlier than I expected. I was planning on pushing 70 days but the trichomes on the tops and mids had a good amount of amber on them. Final smell is the most common phenotype - maple syrup and butter smell. Quite strong smelling too. This plant started off very stunted due to the hull of the seed remaining stuck to the cotyledon leaves for around ten days after germination. It deprived the cotyledon leaves of light to photosynthesize and also caused them to warp. Many people would have restarted possibly. The genetic expression on this one ended up being quite wonderful. I’m really excited for when she’s dried up and cured enough to vape some of it in around 2 weeks. I’m super happy with the combo of my soil and blumat. The worms in the soil seem healthy and abundant which seems indicative of really healthy soil.
Likes
11
Share
@Teezkiee
Follow
Fastest Flowering I have ever seen, some magic, quickly moved to Ripening
Likes
4
Share
@blaze_fpv
Follow
Started off week 2 with heavy defoliation // they took it like champs // they instantly started to fill the space again // back right corner is still a bit behind but the rest of the canopy looks crisp 👌🏼 End of week 2 // kolas starting to form up // currently 27° at 60% // gonna lower the temp to 25 very soon // also collecting the water every day and then water them daily // gonna start using green power phosphor booster in the next week
Likes
16
Share
Hello. All photos from flower day 6. On flower day 3 I switched the Sanlights up to 80%. On flower day 6 I sprayed the plants with Spruzit, to prevent any kind of insects. As you can see everything is okay besides that algae but nothing too bad so far. All under control. See you next week. ✌️
Likes
6
Share
@Brujha77
Follow
Start Blüte 🥀🥀 Die letzten 3 Tage gab es je 2h weniger Licht. Seit heute sind die 3 dann bei 12/12. Aktuell gibt's nicht viel zu tun. Auch die mittlere sieht nach dem CalMag +Magnesium extra wieder gut aus. Muss sagen bin da sehr gespannt. Jedenfalls riechen die guten jetzt schon sehr Intressant😍😍
Likes
11
Share
@PanGrower
Follow
I think about the fact that it is no longer necessary to cut leaves. I cut it a lot, but I notice that many people cut a bunch of leaves at one time, although somewhere I read no more than 10% at a time. When I gave fertilizers, I always diluted them with water even more to reduce ppm Day 68: I added cal-mag to the diet because the leaves are really turning yellow from the bottom. 0.5 ml Day 70: I added 1 ml cal-mag
Likes
31
Share
@Pedrojuan
Follow
Bueno, en el inicio de la fase de floración, hemos cambiado la solución nutritiva con ml x ltr , metí la red scrog y he notado que esta cepa se estresa con facilidad, tras el cambio de agua y nutrientes y la red quedaron full stress, poverine... Empiezan el fotoperiodo con mucho olor a vegetal y esto me hace temer que tendrán mucho olor los futuros cogollos... esperemos tener suerte también en este cultivo. Estoy muy contento, no pensé que gracias a ZOE SPACECAKE me iba a apasionar tanto cultivar el cannabis.
Likes
48
Share
~ WEDDING CHEESECAKE FAST FLOWER by FastBuds ~ Well fam, here we go again with another epic strain from FastBuds Fast Flowering stable. After having such tremendous success growing their Gorilla Cookies Fast Flower outdoors last year, I've decided to run another of their fast flowering strains outdoors this year... Wedding Cheesecake Fast Flower! The best description of this awesome cultivar comes directly from my friends at FastBuds which is as follows: "A delight for the mind and body: Wedding Cheesecake FF (Fast-Flowering) is a delicious strain that offers XXL yields in a 7-8 weeks flowering cycle. This terpene powerhouse produces loads and loads of mouth-watering vanilla-creamy-cookie-scented terps with hints of citrus and cinnamon. In addition to its delicious aromas, this variety grows very well in both indoor and outdoor setups, yielding up to 650 g/m2 without extra maintenance, making it the ideal strain for beginners as it allows you to maximize yields while minimizing work. This super-fast feminized photoperiod version offers upbeat and energetic yet deeply relaxing effects that are perfect for consumers looking for a heavily focused, motivating, and creative high. It’s the ideal strain for those needing that extra energy boost to start a busy day on the right foot. Wedding Cheesecake FF boasts chunky, large-sized buds with a thick layer of silvery-white resin and bright orange hairs scattered all over: that just screams ‘quality’. The lime-green flowers sparkle with an array of hues ranging from dark to light green, to magenta and purple, and reek of a delicious aroma that’ll remind you of fresh store-bought cheesecake. This is an XXL hybrid that grows extremely tall in height, reaching up to 3m with one huge main cola and multiple long side branches that can withstand enormous yields of up to 650 g/m2 with ease. Wedding Cheesecake FF is extremely resilient to the elements and can be grown in almost every climate as long as you’ve got the space and basics covered, making her an excellent choice for those looking for large-scale harvests with a quick turnaround time without much effort." ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: This is going to be an outdoor grow, but I have started the Wedding Cheesecake FF indoors as our weather is still too cold to put her outside (nighttime temp's dipping regularly into the 30's℉). The plan is simple... let her grow inside under a 19/5 light schedule until the nighttime temperatures stay above the mid 40's℉, at which point she'll be moved outside and transplanted into the soil which I have already setup and inoculated with beneficial microbes, and then let the fun begin!🤪💚 ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 7/28- Can you believe we're going into the Seventeenth week of veg for the Wedding Cheesecake Fast Flower by FastBuds... UFB!🤯 This humongous girl had better get in gear and start flowering soon as her stretch has finally stopped and she's about as healthy as you could ask for! We had passing showers all day today, which took care of my watering duties today. 7/30- The weather continues to be hot and dry, with only an occasional passing rain shower maybe once a week, and as a result the daily watering continues after sunset. 8/1- Currently, all I really have to do right now is regularly watering her, and checking daily throughout her foliage for yellow or dead shade leaves which I remove, so life is muy bueno!😍 8/3- Another hot week has come to a beautiful end and I have a feeling that the Wedding Cheesecake FF is getting ready to bust loose! Thank you for checking out my diary, your positive comments and support make it all worthwhile! 💚Growers Love!💚😎🙏
Likes
12
Share
Wow, what a powerful guy, his root sprouted very quickly still in the glass of water! 😏
Likes
12
Share
Привет друзья. Моей растихе сегодня 48 дней. Начал применять LST технику на 19 дне и продалжаю применять её через день, а 18 августа добавил ДЕФОЛИЗАЦИЮ С 20.08 ДЕФОЛИЗАЦИЮ делаю каждые 3,4 дня С 20.08 LST технику делаю каждые 4.6 дней На сегодняшний день влажность 50% Три дня назад заметил высокий Ph 7.9 С сегодняшнего дня Ph 5.8 Заказал погладитель влажности, отпишусь в следующем репорте. Не смотря на высокую влажность и высокий Ph, растение растёт хорошо, генетика радует. Всем мира и добра! https://t.me/smail_seeds #Smail_Seeds
Likes
46
Share
Soooo, nach langem Warten (ich bitte um Entschuldigung, es kam immer irgendwas dazwischen), nun die Ernte! Nachdem ich jetzt alle Sorten verkostet habe, kann ich euch nun mein Fazit präsentieren. Im Großen und Ganzen bin ich eigentlich ganz zufrieden mit dem Ergebnis, muss aber auch gestehen, dass ich bei der ein oder anderen Strain doch etwas mehr erwartet habe. Bei den nun folgenden Bewertungen möchte ich noch anmerken, dass sich diese rein auf den Outdoor-Anbau der jeweiligen Sorte und nur auf den einen bekannten Phäno beziehen. Man kann grundlegend behaupten, dass sich alle Sorten doch sehr solide geschlagen haben, und das bei diesem … naja, sagen wir mal wechselhaften Sommer. Allerdings merke ich einfach, dass sie lange nicht ihr volles Potenzial ausgeschöpft hatten, was ich immer etwas schade finde. Ich bin trotzdem froh, dieses Projekt durchgezogen zu haben, und gehe mit reichlich neuen Erkenntnissen sowie einem abwechslungsreichen Stash in die besinnliche Zeit. Was hat mich grundlegend bei den meisten Sorten gestört? Bei fast allen Sorten, mit Ausnahme der Hella Jelly und der Lemon Tree (wer hätt's gedacht), waren die Terps doch sehr flüchtig. Im Vape kamen sie wirklich gut zur Geltung, wenn man sie allerdings im Joint (pur, versteht sich) geraucht hatte, haben sie oft nach den ersten Zügen an Präsenz verloren, was wirklich schade ist. Dies ist aber wahrscheinlich auf die Anbaubedingungen zurückzuführen und soll den Breedern keinesfalls ihre Qualität absprechen. Wie schon in einem vorigen Kommentar erwähnt, haben sie einfach nicht ihr volles genetisches Potenzial erreichen können. Ich bin mir des Weiteren auch nicht sicher, ob ich beim nächsten Mal wieder auf die Dryferm-Bags setzen werde. Es war doch ein ziemliches Gefummel, bis man die Blüten ohne Kontakt zueinander in die Beutel verfrachtet hatte. Außerdem hat es meiner Meinung nach die Trocknungszeit eher verkürzt, obwohl ich mich an die Temperatur- und Luftfeuchtigkeitsrange gehalten hatte, was ich auch nicht unbedingt begrüße. Und zu guter Letzt sind sie auch echt nicht billig, wenn man bedenkt, dass ich pro Pflanze teilweise über 4 Beutel benötigt hatte (pro 3 Stk. ca. 25 Euro) und sie laut Hersteller nur dreimal verwendet werden sollten. Das ist doch auf Dauer ein ganz schönes Investment. Aber das sind nur meine 2 Cent zu dem Thema :). Nach und nach sollten jetzt hier die Erntereports eintrudeln. Ich hoffe, ich schaffe alles heute. Falls nein, seht es mir bitte nach. Falls ihr noch spezifische Fragen zu einer Sorte habt, lasst es mich einfach wissen, dann bekommt ihr noch eine ausführlichere Beschreibung. PS: Die Filmore-Slim musste ich leider fast komplett entsorgen. Sie hatte die festesten Blüten, die ich je bei einer Outdoorpflanze gesehen habe, was ihr leider zum Verhängnis geworden ist (durchgeschimmelt). Von ihr hatte ich leider keine rauchbaren Blüten. Von der Optik war sie auf jeden Fall ein Champion! Ich habe von allen Sorten Fresh Frozen in der Gefriertruhe, die ich in der kommenden Zeit wachsen möchte (auch von der Filmore Slim). Also kann ich sie hoffentlich als Konzentrat verkosten. Das soll es gewesen sein. Ich wünsche euch viel Spaß mit den folgenden Ernteberichten und eine ruhige, besinnliche Weihnachtszeit mit euren Liebsten! Wir hören uns dann hoffentlich im nächsten Jahr wieder, mit vielen neuen spannenden Projekten. Peace!
Likes
24
Share
@Theia
Follow
Week 4 Flower Diary: The Generative Pivot & Structural Reinforcement ​Phase: Mid-Flower / "The Bulking Engine" Light Intensity: 950 µmol/m²/s Environment: 28°C / 52% RH (1.56 kPa VPD) ​1. Environmental Governance: Chasing the VPD ​The primary focus this week has been the pursuit of the "Perfect VPD". As the Invisible Sun intensity was pushed to 950 µmols, the atmospheric pressure was increased to match the metabolic demand. ​The 1.56 kPa Target: Raising the VPD at this stage is a form of Generative Steering. By increasing the "atmospheric pull," we maximize transpiration velocity, ensuring the raw materials from the Biotabs and Bactrex are pulled efficiently into the developing flower sites. ​Heating Optimization: Introduced a Vivosun W70 heater to replace the bar radiator. This provides a more distributed thermal lift, eliminating the risk of localized root zone damage on inner-facing pots while maintaining the 21.2°C root-floor temperature needed for microbial stability. ​2. Nutrient Strategy: Structural Reinforcement ​With the PK Tea currently on a 36-hour bubble, the substrate was buffered today to support the high light load. ​Silicium Flash Top-Dress: Applied a top-dress of Silicium Flash to provide a slow-release mineral foundation. The added Silicon is critical at 950 µmols; it reinforces cell walls and helps the plant regulate its stomatal aperture under high-intensity stress. ​Top-Watering Protocol: Established a weekly 500ml top-watering routine. This serves two clinical purposes: it washes the Silicium Flash into the rhizosphere and prevents the accumulation of salts in the top inch of the media—a common issue in bottom-fed Autopot systems. ​Microbial Maintenance: Integrated a monthly Bactrex recharge into this top-watering schedule to maintain the microbial density required to process organic inputs. ​3. Photobiological Log: Spectral Steering ​The 13/11 photoperiod continues to drive high efficiency via the "Sleep Hack". ​Emerson Effect Efficiency: Running the Deep Red (680nm) and Far-Red (730nm) channels mid-day allows both photosystems (PSII and PSI) to operate in a synergistic series. This prevents the metabolic "bottleneck" that occurs when plants are pushed near their saturation point of 1000 µmols. ​UV Status: While the Solacure Flower Power arrival was delayed, the room is being coaxed into high gear at 1.56 kPa in preparation. Once the bar is deployed, we will initiate the UVR8 process, where the plant perceives 280nm radiation and responds by increasing glandular trichome density as a biological defense.its some interesting science goes on when you blast 280nm photons at a plant. Proteins do mad stuff which I look forward to going on about once the damn light arrives.. ​4. Observations & Baseline ​New flower site photos taken today establish the Pre-UV baseline. Stacking is dense due to the high Phytochrome Photostationary State (PSS) maintained by tmynlighting rig and the plants are currently praying to the light gods, indicating they have fully acclimated to the current 950 µmol load. ​Weekly Tasking: In 36hr Check PK Tea oxygenation and apply at the end of the brew cycle. ​UV Arrival: Inspect Solacure bulbs and program the 15-minute "Acclimation Pulses" for the mid-day peak. ​VPD Check: Ensure RH doesn't climb above 55% during the dark transition. Thanks for looking. Grow well.🌿💚🇬🇧
Likes
17
Share
Stretch is finally rounding out and it’s time to start stacking buds. They loved the little defoliation.. light is at 400 watts it’s too hot for full power and probably too much light anyway
Likes
16
Share
@osmrducks
Follow
Day 50: Girls are looking great! 💪 A couple of them are a little further along than the others. Pistils are starting to change colors. PPM's going in are higher than runoff PPM. No change in the PH. In at 6.5 and out at 6.5.... Still have some rust spots. Still thinking that I need to dial in my light distance/intensity. Day 51: Got one girl that the issue of rust spots is not going away. Not getting worse, but just will not leave. Other than that they are still bulking up and looking beautiful. Can't wait to start checking the tric's! Using AN Big Bud for a couple feeds and MOAB for a couple of feeds. Have been feeding every water as my output PPM's are less than what is going in. Will keep this cycle until needed to flush or an issue occurs.. Day 52: No new updates. They still look basically the same as 5 minutes ago when I checked em!! 😂😂 Day 53: Went ahead and ran 2 gallons of PH'd water through them. This rust spot issue is driving me crazy!!! Will just use PH'd water for a day or 2 and hope that it stops! Day 54: Well, no new spots that I see. Probably too early to tell, but I feel better about it :) Day 55: No new updates today. Watered with Recharge. Day 56: The girls look wonderful and smell the same. Gave them a good defoliation today as they were extremely bushy! Thanks, B for the pointers!! 👊
Likes
Comments
Share
Auf gehts... Sie stehen jetzt doch auf grund des starken geruch's in dem anderen zelt mit Aktivkohlefilter. Heute an tag 5 der woche hab ich nochmal gegossen und morgen wird das letzte mal entlaubt.
Likes
7
Share
Geht Mega ab die gute🌱😅 Habe sie jetzt in die Blüte geschickt,mal sehen wie sich alles entwickelt ?😅🍃 ich glaube sie wird sich noch zum Monsters entwickeln 🌱?
Likes
15
Share
Day 91, Power at 95% and lamp distance at 40cm. She’s looking almost ready now. Most of the trichomes are cloudy, with about 30% still clear, so I’d say another 7–10 days before harvest. Now ust plain water until chop day.
Likes
77
Share
They look like about another month on most of them. I'm interested in how big the buds will get, I'm used to having a big main cola instead of an even canopy. The dirty aquarium water has been doing great through flowering so far, no nitrogen toxicity. 3/11/22 - Defoliated for the last time! Defoliated so there's no moisture buildup between leaves, preventing PM. There were so many leaves, it looked pretty like a beautiful bush - but my intuition told me that those are going to hold too much moisture. Now there is enough space for the buds to fill out with even airflow throughout. They don't look as beautifully full after defoliation but they'll be cleaner & easier to trim come the end of flower. Aquarium water only: 6.82pH 395 PPM 73.4⁰F Nutrients added: 5Tbsp unsulphured molasses ¼tsp raw potassium ¼tsp raw phosphorus 2Tbsp concentrate Seaweed 1tsp mycorrhizal fungi powder Aquarium water after nutrients: 5.83 pH 787 PPM 73.4⁰F
Likes
69
Share
@nonick123
Follow
Día 51 (22/07) Las plantas han reaccionado bien al 2º topping! 💥 Algunas de ellas ya empiezan a formar los nuevos brotes justo debajo del nudo cortado! Hoy NO necesitan riego, tras regar ayer con 1 Litro de Té Vegetativo de Lurpe! 💨😁 Día 52 (23/07) Las plantas empiezan a formar rápidamente nuevas ramas tras el topping! 😍 A pesar del alto calor (35 - 38 ºC), gracias al sombreado y el mulch se mantienen frescas y con la tierra húmeda, ¡perfecto para los microorganismos del living soil! Día 53 (24/07) No es necesario regar Día 54 (25/07) Los nuevas ramas se lanzan al cielo! 💥 Me encanta ver como los nuevos brotes de un color verde pálido (casi radiactivo) nacen entre el intenso verde oscuro de las hojas de abanico ya formadas Hace un día nublado y con 29 ºC de máxima. No es necesario regar! Día 55 (26/07) Riego con 500 ml H2O pH 6,5 Día 56 (27/07) Retiro los ajustes de LST a la mayoría de las plantas, para que crezcan libres ahora que se acerca el stretch No es necesario regar Día 57 (28/07) Riego con 1 Litro H2O pH 6,5 con 25 ml/L de Humus de Lombriz Liquido Aplicación foliar Kelp hidrolizado de Lurpe Solutions a 0,25 ml/l 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae