Likes
Comments
Share
Hello everyone, The 2 peyote cookies plants are almost ready to harvest the current runoff is 60 ppm the leaves are still mostly green. The temperature is in the tent 24 degrees celsius the dehumidifier is running causing the temperature to rise with 1,5 degrees celsius. I'm not expecting a big harvest from this two plants but the buds from this strain are delicious. I will post the harvest update in about 17 to 20 days from now. Thanks for stopping by and have a nice day. Best regards, Growfather
Likes
6
Share
Really struggled with temps this week it’s has been way to hot managed to get down a little but tbh it was a hard week never thought I would get this in Scotland with the majority of time being wet windy and cold. Tried everything to get temps down but the heat was everywhere😩 sooooooo what do ye all think ready or not
Likes
12
Share
Day 14 from seed and things are going smoothly so far. 2 are a little behind but they are catching up. I’m only doing LST on the one Jedi cookies since I’m not sure how the space will be. Topped dressed 3/4 plants with a mix of soil, worm castings, and homemade compost I started awhile back. Should just be able to water for the next couple weeks before adding some stuff for flower
Likes
24
Share
In week 12 the humidity inside my HOMEBOX-tent is unfortunately still VERY HIGH (maximum of 73%). The combination of big buds and high humidity is BAD...I fear bud-rot. The 12 AK-47 plants from SERIOUS SEEDS continue to THRIVE! They all have a healthy green color and produce buds all over. All branches have formed HUGE colas at this point...its AMAZING to see how big the AK-47 can get. Every watering I add MILLS-nutrients following the feeding schedule of Mills from their website and the plants LOVE IT. The trichome production is INSANE, they are FROSTY AS HELL NOW! 😎 I cant wait to try this amazing smelling strain and see how good it works against my chronic back pain. The VERY STRONG aroma reminds me of Sandalwood end is THICK and HEAVY at this stage of flowering. The two SANlight Q5W-Gen.2 LED-lamps are doing an EXCELLENT job until now, the spectrum is PERFECT for cannabis. Both LEDs are dimmed to 100% now in week 8 of flowering, because FULL-POWER mode is needed for abundant flower production.I LOVE THOSE LEDs 😍 and I can only strongly recommend to every grower to give them a try!
Likes
40
Share
@Oyziphar
Follow
👉Wedding Gelato #1 is incredible. She can handle the strong effect of the Genoneleven products. 😍 Therefore almost all photos are from Wedding Gelato #1 👉Wedding Gelato #3 seems to have been fertilized a bit too strong. The leaves curl and the color is dark green. However, the leaf tips don't turn brown. This week's flush : only pure water from the water tank. 🙏 Buds have become rock hard with a lot of trichomes. 😍😍😍 Next week will be harvest time 😁😁😁
Likes
9
Share
Guava Runtz Automatic – Woche 5 Meine Guava Runtz Automatic befindet sich aktuell in Woche 5 und zeigt einen richtig schönen, buschigen Wuchs, der mir persönlich extrem gut gefällt. Sie entwickelt sich sehr kompakt und gleichmäßig, wirkt dabei absolut gesund und vital. Ihr Gesamtbild ist kräftig und stabil, genau so, wie man es sich in dieser Phase wünscht. Bis jetzt sind noch keine Anzeichen der Blüte zu erkennen, aber ich gehe stark davon aus, dass sie in der kommenden Woche damit beginnen wird. Die Voraussetzungen dafür sind auf jeden Fall perfekt. Ich bin mir sicher, dass sie ordentlich abliefern wird – sie macht jetzt schon einen sehr vielversprechenden Eindruck. Neue Updates gibt es jeden Sonntag – bleibt dran! --------------------------------------------------------------------------------------------------------------------------------------------------------------------- Guava Runtz Automatic – Week 5 My Guava Runtz Automatic is currently in week 5 and shows a really nice, bushy growth structure that I personally like a lot. She is developing in a very compact and even way, while looking completely healthy and vigorous. Her overall appearance is strong and stable — exactly what you want to see at this stage. So far, there are no visible signs of flowering yet, but I strongly expect her to start transitioning within the next week. The conditions and her development definitely point in that direction. I’m confident that she will deliver great results — she already looks very promising. New updates every Sunday – stay tuned!
Likes
11
Share
@Beedog
Follow
Day 63 have to harvest day 77 cause have to move house hope they be ready the small ones be ready any day but don’t know about the big ones 🤞 growth continues anyway hopefully fatten up nice by next week
Likes
58
Share
@Coopmc
Follow
Week 5 for seed bearing and week 6 on revers sexed pollen maker So much pollen and I see signs of pollination !!
Processing
Likes
45
Share
Still working on my canopy. I did some defoliation in order to encourage growth at the bud sites and improve circulation. I have 3-4 weeks until her sister is mature enough to flower. I took a gamble and germinated another seed two weeks ago because the one I originally planted with her turned out to be male. I hope it will be mature enough to produce a decent yield. Even though it will only have been growing for 4 weeks. By that time I expect most of the bud sites on the older plant to have grown through the trellis, and I should have a nice even canopy. The second plant will just be grown as is with very little training. I don't want to slow its growth at all.
Likes
22
Share
1/11/2024 Vegetation Week 1 Day 1- I have a root almost in the water.. Yay!! Top feeding is almost done. she is looking a little sad as I work the transition Top feeding but once the roots are fully in the water she will start to take off. Ensured my PPFD is set between 250-300 it is set to: 258 1/12/2024 Vegetation Week 1 Day 2- I have a root in the water.... NO TOP FEED TODAY SIR!!! now that a root is touching the water and she looks stable, I am not going to topfeed, I will see how she looks tomorrow and as long as everything looks good I am going to go ahead and do a change and week 1 fill on Nutes.. I know it is a couple of days in but the same Nutes go through Week 2 and get changed at Week 3 So I should be good to go.. I will just ensure I fill to root touching the water when I change tomorrow. 1/13/2024 Vegetation Week 1 Day 3- Water Change Day!! I added 36 Gallons of Water to the system: Silica= .5mil/gal= 18mil CalMag= .75mil/gal = 27mil FloraMicro=3.0mil/gal = 108mil FloraGro=2.0mil/gal = 72mil FloraBloom= 2.0mil/gal = 72mil PH DOWN= 30mil Very important thing with this system is to now wait the 24 hours for the system to adjust.. Do not make any further adjustments to your PH up or Down for 24 hours to allow time for the system to balance. 1/14/2024 Vegetation Week 1 Day 4- Today I just adjusted the PH to ensure that it was right at 6.0 1/15/2024 Vegetation Week 1 Day 5- Today I Cleaned up the lower damaged leaves from the transition from top feeding to roots in the water. She looks good today. 1/16/2024 Vegetation Week 1 Day 6- Today I just took a picture of the beautiful lady for Log. Other than that just normal day to day operations, check the pH, check the Humidifiers and fill as necessary, check level of water in the Res. Everything looks great. onto Tomorrow!! 1/17/2024 Vegetation Week 1 Day 7- Today I filled the humidifers, checked the PH and just let her grow.. Grow baby Grow.....
Likes
6
Share
@Naujas
Follow
That's how I know the crop was harvested too early:( ..... but only because someone started visiting my place of cultivation and took my two girls, and left two, so that he wouldn't come back a second time and take them, I decided to cut her down earlier:( that's it such news awaited me when I returned from vacation, but overall the girl looked very beautiful, although she got a lot of stress when the snails ate her, but she endured it and recovered very well:) I will dry the bigger flowers and make bubble hash from the rest, good luck to everyone be careful in nature :).
Likes
144
Share
@DevilsBud
Follow
FLOWERING IS UPON US for all of the strains I wanted to let the 2 purple berry Kush veg for another week but forgot to put them under the TS-1000 but hopefully there still gone grow fine it is experiment achter all. Have made the switch for 12/12 couple day's ago and i see them all developing 😍 hopefully by the end of next week it will get interesting 👌🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
3
Share
Likes
2
Share
Just maintaining the tent, and she is doing so well, think she is gonna be my highest yielding auto to date, looking beautyy
Likes
4
Share
Week is going good aside from me accidently cutting off a stem on pheno 2. If I can properly save the cutting though I might have a chance at another female. Pheno 3 I'm hoping can make some comeback as I really want to flower the plant, its not dead by any means but the way its growing I just cant see it allowing itself to flower the top leaves were barely growing so I topped. Hopefully positive changes within the next week.