Likes
Comments
Share
Week 5 / Flowering During this 5th week of flowering, everything is going very well. There have been a few periods of heat, but overall everything is progressing nicely. A few buds are hidden by some leaves, but given how advanced the flowering stage is, we will avoid removing them. Beautiful colors are starting to appear: a pinkish-purple tone for Froasted, while Purple Cookies is showing a darker shade. Our odd one of the group, Sticky Berry, continues on the same path. There are also a few signs of previous overfeeding or underfeeding, but nothing concerning at this stage. 12/12 switches : 12/06/2026 Back: Frosted Grape Front left: Purple Cookie Front right: Stick Berry Watering remains moderate: ~600 mL for the larger plants and ~300 mL for the smaller ones, with 1 L being the maximum applied so far.
Processing
Likes
3
Share
Hello fellow gardners! I fucked up this week. Not sure how i managed to duplicate week10 and then remove week 11. Please forgive me and my new phone for this. W10 was not so interesting. But it sads me to say that all documentation from that week is lost. I have also noticed that i overfed them a bit this week, but they should be just fine. Starting to feel a wonderfull smell from gelato. I Will upload a full rewiev from day 1 - last day of cureing once i get the time. Ive noticed buds growing on a leaf branch, is that normal? There is a picture uploaded.
Processing
Likes
6
Share
SUNDAY 4/21: I fed them about 1/2 gallon each today. Will take some photos tomorrow- MONDAY: Had other stuff to do today, so they only got a once over. TUESDAY: I rearranged them and took some photos today. WEDNESDAY: I rearranged them and took some photos and a video. Will water her tomorrow- THURSDAY: I watered with about 1/3 gallon and included some terpinator, calimagic, and beastie bloomz. She looks great..wasn't bothered by the heat last week as much as the WW XXL. She should finish strong if I can get the temps under control. She's got a lovely aroma.😀 FRIDAY: I made some improvements to my fresh air a/c intake in the tent that dropped the temp a couple of degrees, and the new dehumidifier is keeping the RH right where I want it..45-50%.👌 This allows the evap cooler to be more effective at cooling as well...above 50% RH and it's basically just a fan..
Likes
13
Share
It went pretty good this week (*I'm sorry because of ly work I could not take pictures this week so you have 2 videos*). I will not cut anymore branches before turn into flowering next week, normally it will be a 20 week grow from seed to budd I hope great results with this Cheese from Greenhouse Seeds Company :)
Likes
3
Share
I believe there might be a problem with the plant. Leaves are turning yellow way too early. The pistils are oxidizing very early too. Maybe she got stressed for some reason and decided to accelerate the whole process.
Likes
36
Share
@nonick123
Follow
Día 66 (05/08) Cerrado por vacaciones Día 67 (06/08) Mi amigo viene a casa a hacer un riego con 1 Litro de H2O pH 6,5 Día 68 (07/08) Cerrado por vacaciones Día 69 (08/08) Vuelta de vacaciones! A ver como están después de 5 días sin verlas... 😱 Riego con 1 litro. OnionOG con 1.5 L Añado 3 cm de sustrato nuevo porque se ha compactado y se ven las raíces! 😢 Día 70 (09/08) Riego 500 ml H2O pH 6,55 Eliminación de algunas ramas bajas Día 71 (10/08) OnionOG vuelvo a hacer topping a todas las ramas principales! 💥 Riego 500 ml H2O pH 6,55 Sesión de fotos semanal! Día 72 (11/08) Riego con 1 Litro de Té Vegetativo de Lurpe Solutions. Preparación: 24 horas con bomba de aire (oxigenación) con ingredientes: Green Sunrise 8 ml/L + Insect Frass 16 ml/L + Hummus Lombriz 8 ml/L + Melaza 1 ml/L + Kelp Hidrolizado 0,25 g/L Aplicación foliar Kelp hidrolizado de Lurpe Solutions a 0,25 ml/l 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
17
Share
@4chuk
Follow
Nov. 13 - Week 6 begins. Nov. 17 - It continues to do better than I had thought it would, but this morning it was wilting 😬 I can't keep letting that happen.
Likes
40
Share
@Ganjin
Follow
I tried the strain now several times. The yield is abysmal with 18g of that plant, but the buds have an amazing quality. Quality over quantity but some grams more would be nice. I still have 4 seeds and will 100% grow it again in the far future.
Likes
14
Share
D64/F20 - 03/06/23 - The situation is under control now. I'm going to change water asap (maybe tonight) D65/F21 - 04/06/23 - 👉 Water changed, some hours without nutes... D66/F22 - 05/06/23 - EC 0.8 ph 7.0 D67/F23 - 06/06/23 - EC 0.8 ph 7.3 - added pH- D68/F24 - 07/06/23 - Added water and nutes EC 0.9 and pH 6.3 D69/F25 - 08/06/23 - EC 0.9 and pH 6.3 D70/F26 - 09/06/23 - Added water and Calmag, Connoisseur Bloom A-B. Added pH-. EC 1.0 and pH 5.5
Likes
2
Share
Alles lief gut mit der Shaman bis zum jetzigen Zeitpunkt in der Blüte. Leider beginnt sich an einigen kleinen Stellen etwas Schimmel auszubilden, gar nicht in den Blüten, sondern an den Trieben. Das war mein eigener Fehler, da ich beim Entblättern einige Blätter letzte Woche nicht nach oben ziehend abgezwickt habe, sondern nach unten zur Erde hin gerichtet abgerissen habe. Dadurch habe ich an einigen Stellen das Gewebe am Trieb verletzt, wodurch sich dort Schimmel bilden kann und tut. Ich hoffe es wird sich in Grenzen halten. Es ist jedoch möglich, dass ich durch diesen Fehler zumindest einen der Haupttriebe verlieren kann. Wieder was gelernt. Gibt es irgendwelche Mittel, den Schimmel an den Trieben zu entfernen?Ansonsten bildet sie weiter ihre Buds aus, riecht schon sehr angenehm und entwickelt sich weiter. Es gab ein paar starke Winde und Böen in dieser Woche, dehalb wurde die Shaman vorsichtshalber gegen die Windrichtung angebunden, damit der Topf nicht kippt. Vielen Dank für euren Besuch und passt bei der Entlaubung auf...😫--- Everything was going well with the Shaman until now during flowering. Unfortunately, some mold is starting to form in a few small areas, not on the flowers themselves, but on the shoots. This was my own fault, as I didn't pull some leaves upwards when defoliating last week, but tore them off downwards towards the ground. This damaged the tissue on the shoot in some places, allowing mold to form and grow there. I hope it will be limited. However, it is possible that I may lose at least one of the main shoots as a result of this mistake. Another lesson learned. Is there any way to remove the mold from the shoots? Otherwise, it continues to form buds, smells very pleasant, and continues to develop. There were a few strong winds and gusts this week, so as a precaution, the Shaman was tied against the wind direction to prevent the pot from tipping over. Thank you very much for visiting, and be careful when defoliating...😫
Likes
18
Share
I gave this plant 48hrs of darkness, cut it down and hung branches on coat hangers. It’s about 25F outside so it nice drying conditions with a humidifier and a heater. I stay about 64F and 53RH. I will wait for stems to get more brittle and buck the buds into 1G jars. I will trim the buds, Once they maintain 63RH I put them in Grove Bags to cure for a couple months
Likes
141
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 The flowering are in maturation, Buds are more and more fat and frosty ❄️. Still happy and healthy 💚 💧Give water each 2 or 3 days 1,5l Water + Nutri NPK Bloom + Nutri NPK Cal Mag PH @6 - Nutri NPK Calmag 1/8 tsp for 1 gal. Bloom 1/2 tsp for 1 gal. 💡Mars Hydro - SP 3000 100% 57 cm. 🔥 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾💚🌲. Mars Hydro - SP 3000 💡💡 https://www.mars-hydro.com/sp-3000-samsung-lm301b-greenhouse-led-grow-light NUTRI NPK 💥🔥 https://www.nutrinpk.com/product/npk-mix-pak-for-4-to-5-plants-cannabis-fertilizer/ SweetSeeds - Sweet Mandarine Zkittlez XL Auto🌲🌲 https://sweetseeds.es/en/autoflowering-seeds/3233-sweet-mandarine-zkittlez-xl-auto.html
Processing
Likes
44
Share
@I_and_I
Follow
First grow completed, turned out far better than I could ever have hoped, the plants totally bossed it for all the winging it and improvising I put them through, but we got there in the end haha, Looking forward to next grow, can't wait to enjoy using all good genetics, already have some Bruce banner #3 seeds ready to roll out :) Thanks for reading
Likes
4
Share
So about 11 days since I flipped the light. Would say shes starting to flower the 1st pistils are „stacking“ on the top of the nodes. Also did a strong defoliation today
Likes
30
Share
Welcome to week 4 of flower for the outdoors grow. Green Crack and LSD are continuing to pack on buds, the plants are still hungry and I've stepped up the total amount of feed I'm giving them, #gaiagreen power bloom. Thanks for stopping by growfessors 👽🌳💚
Likes
5
Share
Start of week 7 and all plants are looking great. Added the net to hold them later but I may take it out. Ran into a slight issue…my plants got so tall that I was not able to provide enough PPDF to the lower stems (I need a bigger tent and better lighting…in time). As a result a caused light burn on the top leaves. Additionally, early in my grow I was using Mass Pro. That alone with amendments and I foliaged early with Foop. I believe the Foop and Mass Pro were too much for these plants to handle. Still rocking though…
Likes
22
Share
@Naujas
Follow
well, that day dawned :) growing in a suitcase was really difficult, temperature, humidity, plant growth, everything was very difficult to control, but I managed something, it was an extremely interesting experience :) 119 gr wet, I think it will be between 25-30 gr dry , which I think is really good from the suitcase :) it was something different than usual, and now I'm going to grow another begina, which is much bigger than this one :) good luck to everyone, and thank you.:)
Likes
6
Share
Wow these buds !! Theres that smell 😍 Everything looking great ! Buds are much bigger then i except for 3rd week. MAN I CANT WAIT Still following same feeding schedule.. Notice plants drinking a little more water now.. Man 8 more clones last week , which 6 have rooted already. I wanna keep this strain going .. Will mother 2 or 3 of the best clones for my next cycle ... im just hoping i got the timing right ... will make clones from mothers at harvest cause i use the same tent to dry , so buy the time herbs are dry clones should be rooted ... wish me luck!! Today i got my self a Agrinnova Electric sprayer, which is battery powered and Man im impressed, check out my video