Processing
Likes
Comments
Share
@
Follow
Likes
Comments
Share
At the end of the 6 week of bloom the blackberry cake feminised is holding up. Her bloom is not that fruit full as was lacking the essential nutrients to achieve that. Although the lady is blooming nicely. Her leaves have faded due to the lack of nutrients. The calyxes on the flowers have continued to swell, the pistols are dulling with the plant producing try chromes and bud formation. The blackberry cake feminised stands at approximately 69cm ta
Likes
6
Share
@Rinna
Follow
This was a wild ride. Gave way to many nutrients and I realised this way too late, when lock-ups already started to happen. The buds still look very potent, I just think they had way more in em size/potency wise if the nutrients would've been on point. Not growing auto flowers indoor anymore, but I'll deffo be growing this one outdoors this year! The smell is out of this world, #1 smells like tropical fruit juice, #2 more of a candy-sweetness but definitely tropical. Can't wait for ya'll to grow this one!
Processing
Likes
12
Share
Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 01/11/2019 - Started using BioBizz Alg-a-Mic on spray, using it once per day at lights off, 1 or 2 puffs to create a light mist, only on non feed days, I mixed 0.1ml on 100ml water 6.4 PH. 03/11/2019 - Gave her 250ml plain water with 6.4PH 05/11/2019 - Gave her 0,15ml of each BioBizz Grow, Max and Bloom on 300ml water 6 PH didn't manage to get it higher to 6.3 at least. 06/11/2019 - She started to show some pistols, probably entering pre-flower. 07/11/2019 - Soil was to dry due to 2930c temps gave her 0,500ml of 6.5PH water with 0,25ml Grow, 0,25ml Max, and 0,45ml Bloom BioBizz.
Likes
Comments
Share
Likes
12
Share
@Luv2Grow
Follow
Day 64 - The start of week 10 and decided against defoliating and just tucked all the leaves in the middle instead. I’ll still pluck some here and there when needed. Buds are getting nice and fat and still has some decent time to fatten up even more. Day 65 - Ended up having to give her 2 gallons of water today, she’s starting to drink a lot. Buds are still fattening up nicely and smell is strong as hell. Day 67 - Not much happening, just watering/feeding when she needs it and doing a little light defoliating every couple of days. She should be ready for water tomorrow. Day 68 - All still good and she was ready for water and nutes so she got 2 full gallons today. This might be her last actual feeding of nutes before starting to flush but I’ll see how she is over the next week or so. Day 69 - Just some updated pics for the day, nothing new happening. Waiting for the pistils to start dying off but no real sign of that yet. Day 70 - Ending week 10 today and she’s got some fat and stinky buds. Haven’t really started looking at trichs since all her pistils are still bright white and healthy. Hopefully she’ll start winding down here in the next couple of weeks.
Likes
77
Share
Start of week 6 and she is 2 days into flower. Gave them a good feed. Ppm are at 970's.the extra 2 light have done a good job at filling in for side lights. Just sprouted HSO: PURPLE TRAINWRECK. Super stoked....The Barnes farm vanilla kush didn't germinate Evan after 5 days and some finess so....dud...the Banana has become a bush of a plant, bud sites everywhere.
Likes
7
Share
High quality autoflowers guys! Very happy with this 3 gelato auto by fast buds, the smell it's very pungent and there are a lot of trichomes in early flower, very good strain to grow, let's see how this 3 ladies keep developing those stinky flowers! 💚💓👨‍🌾
Likes
39
Share
Nothing to report. Looking good to me!?
Likes
3
Share
June 21: first day of summer and Tropicana Cookies FF is doing fine. Foliar spray in the morning of Extreme Blend, and potassium silicate to toughen the stems. Using Dr Bronner’s Peppermint soap as a wetting agent. Started a lazy compost tea this afternoon. Third tea so far this year. June 24: almost ready for the second round of topping. Likely tomorrow. June 25: video show second round of topping to make the manifold.
Likes
Comments
Share
Tart Pops is entering week 6 of veg and she's stacking up beautifully! Been training the top heads using plant bends to open her up and keep that canopy nice and level. She's responded like a champ — lower sites are reaching for the light, and the main tops have been topped again to push even more branching. Structure is looking strong and symmetrical, and she’s taking the training like a true tart with attitude Keeping an eye on node spacing and dialing in those nutrients — this girl is prepping to blow up in flower! Let’s see what she’s got in the next stretch
Likes
25
Share
Overwatered the two in the back earlier this week on day 12, not paying attention like an idiot 😫. Will resume watering as normal tomorrow, day 16. Plan on starting LST this week, depending on size. Plant in the front on the right is almost ready now. The mutant plant in the front on the left has some really weird growth, but I’m gonna see where it goes... why not?! ________________________________________ Started LST for 2 of the plants on day 17. The other 2 are still a little short but will probably be ready for LST within 3-4 days. I have now (day 19) started LST on all 4 plants. First I plant started LST on, now has the lower sites starting to fill in. Wrapping up week 3. There is one plant clearly straggling behind the others. The other 3 (including the mutant!) are responding well to LST. For now I’m sticking to leaf tucking, and have only defoliated the couple leaves sagging into the soil. Over-watering from early in the week definitely slowed growth down temporarily, but seems to be back on track now!
Likes
57
Share
W13 - ESTHER 🌱is growing tall. Ahm... Started again thinking about toping ✂️ her 🤔 Still can't spot any signs of flowering 🌻 in her 😥🤦‍♂️ I carried on with defoliation of unnecessary leaves.
Likes
9
Share
All the photos are in the 8x8 now. just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
11
Share
sooooo... I have now harvested the plants and they looks so pretty 😍😌 I'm really proud of myself to have produced such THICC BUDS!!! 😅😍 and the smell is so awsome 😵 this strain is a 11 from 10 👌 a realy big Thanks to Royal Queen Seeds for this 2 awsome strains 💪 A detailed rating comes after drying with a detailed score board 😄
Likes
2
Share
Abgesehen vom regelmäßigen Gießen und dem gezielten Entfernen einzelner Blätter lasse ich die Pflanzen aktuell in Ruhe wachsen und sich natürlich entwickeln. Der Fokus liegt auf gesundem Wachstum und einer stabilen Entwicklung. Bei jedem zweiten Gießvorgang erhalten die Pflanzen Honigwasser, die übrigen Gießgänge erfolgen ausschließlich mit klarem Wasser.