This week marks the 10th and likely final week of my autoflower grow. The buds have really filled out and are covered in a thick layer of trichomes. Most pistils have turned orange/brown, and the plant is giving off a strong, pungent aroma. Under close inspection, the trichomes are mostly cloudy with some beginning to turn amber – a clear sign she’s nearly ready for harvest. The fan leaves have started fading and curling slightly, especially lower down, which is to be expected at this stage. I stopped feeding nutrients around a week ago and have been flushing with just water to clean out any remaining salts. She’s still drinking well and hasn’t shown any major stress signs. Overall, I’m really happy with how this run turned out. She stayed compact, didn’t stretch too much, and produced some dense, frosty buds. I’ll probably gave her 2–3 more days before the chop – just to let a few more amber trichomes develop for that nice relaxing effect So i cutet her 2 days later because of the to high humidity , because i dont want bud

Good vibes only

Aggiornamento 18/05/2026 la cream caramel che avevo cimato si sta riprendendo abbastanza bene per procedere con il main lining e oggi ho cimato anche una delle due panama red e somministrato 2ml/l di fish mix per aiutare le radici a svilupparsi meglio ho preferito non esagerare visto che il suolo lavevo gia pre caricato con guano e hummus.penso che a breve cimero anche le altre due bimbe per non far avere il sopravvento sulle altre

Welcome Back!💚 Nach der siebten Woche des Wachstums entwickelt sich die Snapple Apple weiterhin nur spärlich. Es war Zeit sie jetzt dennoch in die Blüte zu schicken. (07.02.26) An sich wirkt die Pflanze jetzt schon vitaler, dennoch war jetzt kein großer Höhenwachstum zu beobachten. Ich bin nun gespannt, wie sich die Pflanze in der Blütezeit verhält. Diese Woche habe ich das letzte Mal den Orgatrex Dünger beigegeben. Mal schauen, ob da noch was an Wachstum passiert🙈 Die Umgebungsgegebenheiten sind OK: ————— 🌞 Temp: 21°C 🌚 Temp: 18°C bis 19°C 💨 RH: 54% VPD: 0,85 kPa ————— Viele Grüße 👋

Alright, by now your laughing at me or just about will be. I’ve spent the past three nights obsessing over how to get my seedlings back on track from their stunted growth. Meanwhile taking care of the one plant that took off nicely. I trimmed up the spotty leaves again and removed all of the other plants from my aero garden into the LYKO. I left two, in very bad shape seedlings in there in hopes something got happen. Took the healthy ones and moved them in with the mama that’s doing well. I noticed their roots are red.. but not rotten. They look salvageable so I’ve cleaned them and added hydro guard in hopes to repair them and plan to add some rapid start root enhancer when it comes in the mail this week. I’ve cleaned the water and the entire machine before “repotting” into the Aerogarden. Everything looks nice besides the shit red roots. You can see in the good one that where I trimmed the node there are more waves coming in and new nodes already. I think we’re almost ready to top this one but I’m going to wait a bit so I can create a clone from the topping in a week or two. I also added a fan and moved my airstone into the Aerogarden. I got so upset I stunted these that I went out and bought new seeds as well and you can see my other diary germinating. Will keep y’all updated. Thanks for the support!!

Here we go 😁 Five Barney's Farm Cookies Kush Autos. I'm not overly familiar with autos so I thought I'd try a multi strain auto grow and have a look at what I've been missing. Last time I grew out autos it was Lowryders, the OG back in the day. They were terrible 😂 Prone to rot and no real sophistication to the high. So, I picked some Barney's Farm and 42fastbuds strains, I had intended on running some Royal Queen but they had no offers on at the time. Maybe next time. It's a multi strain grow but I've segregated them for clarity. So, germination. I like to keep it simple. Root riot cubes, heated propagator and a chopstick for pushing the seeds down around halfway into the cube I wear gloves at all times and everything is spotlessly clean. Propagation is at around 28c and took 2/3 days. I put 6 down for 6 up, 100% germination rate. My light is currently on 50% and around 2ft away. The propagators lid is misted up so that diffuses the light nicely.

Just been topped as going tall anyway Very healthy looking plant so far so good Condition are pretty damn good too

This will be the second time I start this strain, it’s gone great so far so let’s do it again! Started off with 24 hours in a glass of water then into a paper towel,then once the taproot was about half an inch I transferred her into a coco pellet. Once she’s broken the soil it’ll be into the tent. Day 3 Looks like it’s time to up pot her and get her under the light.

The tower now has an extra floor made of pool stick I topped two big buds that reached their 5th node Just changed the water and i m going out for two weeks I added some bloom nutrient into the mix as i'm probably going into flowering 12/12 next week as some girls are too tall All the purple punch died they are fragile I liked them tho since the girl seemed so compact and small with many buds I will try and plant another bunch of purple punch later

This girl is speeding toward the finish line. Except for the very tops of the buds most of the pistils are still white so i haven't bothered looking closely at the trichs yet. Will be aiming for a 1 week flush with ph adjusted water. Such a low maintenance girl. Have been feeding with same regimen as my other girl and she's not been causing me any concern.

A Nice sweet smell !!!

The plant really started going off at this point, I also did some LST and it appears to have helped promote the growth of the other branches. Also gave the plant a half dosage of Fox Farms Grow Big at 10 ml/g every other watering for now. The weather kinda dipped a bit this week, this brought it down to the low 70's at many points often but I brought the plant inside for this thanksgiving weekend. Very excited about the next steps!

FLOWERING WEEK 1 - 4TH DAY FLOWERING/WORM TEA

The week was completely normal with no problems, I'm more and more excited about the next few weeks 😁 they already smell very, very tasty 😏😍

Hey!✋ The timely measures taken brought positive results - it is almost unnoticeable that the plants had problems a week ago.😇 I continue to bend the branches, remove excess foliage for better illumination of new shoots. This time I won’t delay the cycle for long; if everything goes according to plan, in a week I will switch the light schedule to flowering. Thank you for stopping by, and be healthy! 🙏 To be continued... 😶

After 21 days in turbo cloner I transplanted 4 Sweet seeds Green Poison into 1 gallon plastic pots filled with Cana coco. Few days later I transplanted another 4 clones into DWC! Stay tuned! Coco feed at 700ppm Dwc feed at 480ppm

Beautiful plants. One was short and stocky, had the largest buds I’ve yet grown/encountered. I’d recommend growing these 👍👌

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.