Planted seed direct in soil

9/19/26 7am Added another 4" Circulating fan to the opposite corner & set to dynamic speed. Added an ACI heater to the system. Replaced the Viparspectra with an ACI EVO 3. Hand watered with 1 gallon plain 6.0/30ppm reservoir water mixed with 1 tbsp house made banana FFJ, 1 tsp each of coconut water powder, aloe powder, Build a Bloom, & 1/2 tsp each quillaja powder & LABS. DLI set to 38 VPD raised to 1.10 Autopot reactivated.

These grew really well stacked weight evenly, and flushed like a champ. Throw back to the first indoor scrog.

9.10 Coming close to the finish line! Began the flush this morning. 5 gals. Will do another 5 gals in three days. Then another 5 gals three days after than! 9.11 Was suprised to see that the soil was drier than expected. Flushed with another 5 gals today. HUMIDITY HAS BEEN (BASICALLY) UNCONTROLLABLE THIS WHOLE SUMMER NO LESS than 70% and this girl has handled it beyond well! 9.13 Flushed with a final 5 gals. 9.14 -check out the video 9.15 Will be watering a gal today, tomorrow, and Sunday 9.16 watered a gal 9.17-9.18 did not water Probably will not water until she gets the chop 9.19 24hrs of darkness the harvest --------------------------------------------------------- nowayReggie

Starting week 4 she is defoliated and lollipopped so all her energy will be going into the upper budsights. She's drinking a lot growing really nice and strong

Week 6 Light cycle=18/6 Light Power=120w 50% Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 56% Low Rh= % Rh step=0% Speed max=8 Speed min=2 Smart controller settings (during lights on). Lights on=06.00am Radiator on= below 21c Radiator off= above 22c Smart controller settings (during lights off). Lights off=00.00am Radiator on= below 18c Radiator off= above 19c VPD aim=0.6-1.4 DLI aim=35-40 EC aim=1.9 PH aim=6.2 Fri 26/1/24 #3 (Day 36) 📋 defoliate lower leaves that hardly get any light. Sat 27/1/24 #3 (Day 37) 📋 H=35cm D=45cm DLI=31.9 Raised light about 10cm Increased light power to 140w H=35cm D=56cm DLI=30.5 Sun 28/1/24 I have decided today is going to be the last day of veg before I flip to flower. Lights will have come on today at 6.00am and go off at 10.00pm, they will get 14hrs light today and tomorrow will be day 1 of 12/12. 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=Veg nutes. Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=1.0ml/L Terra grow=4.0ml/L Roots=0.2ml/L Easy Ph down=0.125ml/L Ec= 2.05 PH=6.1/6.3 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=181ml/min Flow rate per plant=45ml/min. Total volume made=12L Total volume left=2L Total volume used=10L Volume per plant=2.5L (Est) Runoff. Total runoff=1L Ec=2.7 PH=6.1/6.3 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #3 (Day 38) 📋 With no information for flower time I'm going to have to guess she will be finished in 45-60 days. I removed quite a few lower nodes that probably won't break through the canopy, they where ideal candidates for clones. Light cycle=12/12 Light Power=140w 58% Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 56% Low Rh= % Rh step=0% Speed max=8 Speed min=2 Smart controller settings (during lights on). Lights on=10.01-21.59 Radiator on= below 21.5c Radiator off= above 22.5c Smart controller settings (during lights off). Lights off=22.00-10.00 Radiator on= below 18c Radiator off= above 19c Mon 29/1/24 Lights on at 10.00am off at 22.00pm #3 (Day 39)(Day 1 flower) 📋 H=37cm D=54cm DLI=22.0 At 9.00pm increased light to 150w H=37cm D=54cm DLI=23.0 Tue 30/1/24 #3 (Day 40)(Day 2 flower) 📋 Wed 31/1/24 #3 (Day 41)(Day 3 flower) 📋 H=41cm D=50cm DLI=24.0 🚿 foliar sprayed (Sumo Boost 2ml/L). Thur 1/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=water Neutralise=0.1ml/L Roots=0.2ml/L Easy Ph down=0.ml/L Ec=0.2 PH=6.6/6.6 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=181ml/min Flow rate per plant=45ml/min. Total volume made=14L Total volume left=4L Total volume used=10L Volume per plant=2.5L (Est) Runoff. Total runoff=1L Ec=2.0 PH=6.1/6.2 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #3 (Day 42)(Day 4 flower)***** 📋 H=41cm D=50cm DLI=24.0 Lifted light and increasd power to 196w. H=41cm D=58cm DLI=26.5 Released the Lst to see if that will help. It's not been that bad a week for this one, she hasn't done overly well in the battle for space and hasn't quite managed to grow as tall as the other 3 plants by about 10cm. She has been in 12/12 for the majority of the week. Back soon. Take it easy.

Week 8 | Glookies Auto | Flower She's the biggest plant in the garden right now and she's earned it. At 106cm and properly into flower, the Glookies is doing exactly what a well-selected outdoor auto should do — she used every day of veg to build a frame, and now that frame is filling in with bud sites up and down every branch. The nutrient stack has shifted to match where she is in the cycle. Base feed is now **CANNA Aqua Flores A+B** at 3 ml/l each, **CalMag Agent** holding at 0.9 ml/l, **Aptus Regulator** at 0.1 ml/l. **Plagron Green Sensation** has been introduced at 0.5 ml/l — the all-in-one flower booster covering PK, enzymes, amino acids and biostimulants in one shot. pH 6.2, EC 1.2 mS/cm, 1L per plant per 24h. Temps sitting at 25°C day, 18°C night, humidity 60%. The main cola is stacking well and the lateral branches are following. Good things coming. Updates every Sunday. Stay tuned.

Lost a ton of overall weight from massive overfeeds. She still smells incredible and already smokes real nice. I'll post a legitimate report on everything once she cures up.

A los 9 dias ya se veian raices por los orificios de drenaje de las macetas por lo que me decidí a trasplantarlas a maceta de 6L textiles y meterlas en el armario donde pasaran el resto de sus dias. Aumenté primero a 150 W y en cuanto estuvieron un par de dias volví a aumentar hasta los 220W. Se añadió también el humidificador para mantener una humedad relativa más alta. After 9 days, roots were already visible through the drainage holes of the pots, so I decided to transplant them into 6L fabric pots and put them in the grow tent where they would spend the rest of their days. I initially increased the lighting to 150W, and after a couple of days, I increased it again to 220W. I also added a humidifier to maintain a higher relative humidity.

W11 - GRETA 🌱is a beauty 😊 I am giving her last days to bulk up her buds and trichomes !!! Patience is a blessing 👍

Adding video

Amazing plants super fruity and sweet terps, I could grow this strain nonstop until I die, amazing strain, very recomended, I got a finished diary on this strain if you want to take a look, really happy with her performance, stay tuned to see how this diary ends!! 👨‍🌾❤️💚💛

Week 8 of flower is in the books and this show is quickly coming to an end. I said last week we had about 7-10 days and I was spot on at the 10 day mark. I was only wrong about the order. The cheese is ready to chop before the rest and the gorilla cookies, cherry Bomb and lemon haze will follow in due course. The cheese is a beast and it’ll take a little time to get it all run through the bowl trimmer. At least the big one goes first. Her tallest colas have foxtailed like mar, despite the late supercrop. You can tell where the sweet spot for the light is at about 10” distance from the canopy. Any closer than that and the tails begin to show prominently. It’s a good example of just how close you can get to these fixtures with a little bit of prior experience. It’s been noted for the next run😎👍😎. The res. is on an h2o2 only flush for the remainder until the rest are ready to come down. Not a moment too soon either - the pollen chucking project has stalled out waiting for these girls to finish and now that we’ll have a little extra room, we can start running our cuts in the aerocloner🤟. Not long at all now folks. Thanks for tagging along through all this. Learned a bunch about this system and we’re back to hardware mode to make some serious improvements for the next run🤙😎. I love hardware mode😉. Background/Repetitive Nonsense The strain line up on this grow is look’n quite saucy 😈. We’ve got 2 FB strains this time around - Gorilla Cookies (seems we always have some GSC cross in the works). Mainly because the colours look stellar and remind me of a sugar breathe we did last year that was 🔥. The other FB is their original Cheese strain... because we already smoked all our cheese... and we really like our cheese...😉. Emerald triangle was kind enough to include a freebie of Lemon Haze. Wasn’t really big on the list but we haven’t done a haze strain to write home about yet so worth a go👍. The last is a Cherry auto from Bomb seeds that we’ve been trying to get to for months. Let’s just hope that she’s not a dud like the last bean. The new digs for this run are courtesy MarsHydro👊. Their 2x4 single grow tent, paired with a shiny new 240w QB courtesy ViparSpectra. These folks were kind enough to discuss a collaboration and as a result, here we are to test out the gear with an inaugural run of autos. Each week, we’ll try to expand on some of the benefits of each, as well as any limiting factors or considerations that need attention when pondering purchase. Already I can say that both are high quality products in terms of overall craftsmanship. MarsHydro 2x4 Grow Tent: Excellent construction in terms of durability. Reinforced stitching on the zippers and corners ensures zero tearing. Conveniently placed screen vents and intake/exhaust ports. The ceiling exhaust port only exists on the right side. Perfect for me but not great if you’re running exhaust from the top on the left side (left side wall port makes up for this however). The aluminum frame is rigid enough to support the weight of the lights and accessories. Once you have some weight in the tent, she’s go’n nowhere and you can assemble and break it down in record time if moving or stashing the grow op. Only limiting factors I’ve noticed is that temp. Control will be an issue for a tent. It just doesn’t have the same insulating ability as a wood cabinet or other permanent enclosed space. No worries, this is offset by a small desktop heater and keeps the environment exactly where desired. The other issue was a production problem - the ceiling vent was accidentally stitched into the corner seams on the assembly line. Again, no real issue - just pulled it out with no damage or fraying to the tent or port👍. Website link here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-24x48x70-2-x-4-cabinet-closet-grow-box-upgraded-diamond-1680d-mylar-for-sale ViparSpectra 240w Quantum Board: This thing is sleek and slick in terms of design. Closest comparable to it that I’ve seen would be spiderfarmers line of qbs. They feature the same top-o-the-line components and roughly similar spectrums. Where VS takes the advantage is in the convenience of the dimmer nob which is easily accessible and works great at 50% with no strobing👍. The heat sink is also larger which contributes to lower temps. That’s not a good thing in my case but beneficial for most folks. I can already say that this will be a great fixture through all stages of growth. Where I know this light will excel will be in the veg. Stage for sure. Dimming function gives seedlings a much better chance of success with the ability to use lower lighting levels early on and the coverage area on a 240w is great. The average grower will find this panel suitable and fitting to their needs in a 2x4 grow space although I’d suggest 2 units if going any larger than that. The total output in this space equates to about 30w/sq.ft. Which is a decent amount of coverage based on power vs. Growprint. Ideal for veg. Certainly but, in flower - I tend to run closer to 50-60w/sq.ft to achieve higher yields. Again, similar fixtures have performed admirably in the past and while this wouldn’t be considered an “entry-level” fixture, I’d recommend that any grower new to the game not skimp on lighting and start with one of these. The price points are a great value for quality LED tech. These days, so there’s little reason to even consider a lesser fixture👍. I have no detail on limiting factors for this light as yet but have heard that stock branded fixtures don’t necessarily incorporate enough red diodes. I’ve seen no issue myself but confess - I’m no lighting guru. Website link: https://www.viparspectra.com/collections/xs-series/products/xs-series-xs2000 ***8% discount when using code: “ItBudWhisper”*** Happy to have you along for the ride if you made it this far through my opening rant!!😎🤟😎🤟😎

Esta por empezar el engorde final. Ya las flores estan casi formadas. La altura está al límite total. Uno o dos centímetros más y estaría en problemas de verdad. El engorde de muchas flores ya es notorio, pero creo que el uso de un bioestimulante que no es de primera línea, ha reducido el potencial de las plantas. De todos modos hasta no tener el resultado final no puedo afirmar nada. La solución de esta semana fue cargada con más pk booster para ver cómo funciona la linea de greenhouse en esta etapa. Suelo usar pk 13/15 de canna. Pero esta vez puse el que tenía. Seguiré actualizando. Día 31. Se nota mucho el engorde. Las hojas muestran pequeños signos de sobre fertilización, pero nada grave que no haya visto antes. Me suele pasar en esta semana en todos los cultivos en hidroponia. Pero las veces que ko me pasó, no tuve el engorde deseado. Por eso manejo mediciones de PPM superiores 1000. Se empieza a ver cuáles van a ser los cogollos más grandes, pero sigo con incertidumbre sobre cuanto más van a engordar. Estoy bastante conforme al momento. Hoy tuve contacto con plantas macho, pero me cambié toda la ropa antes de acercarme al indoor y le lavé. Además no sé si sumará, pero me rocío en alcohol cada vez que entro a casa, así que espero no tener problemas. Ya voy a ir preparando los esquejes para la próxima siembra. Quizá no logre sacar 10 de las madres que tengo. Pero quizá ponga menos y los haga crecer más tiempo y con bastante LST. Pero será en otro protecto. Por ahora espero que siga el engorde. Día 33. Ya el engorde es un hecho. Por el momento estoy bastante satisfecho. La solución se concentró demasiado así que tuve que agregar agua. Pero más allá de algunos signos de sobre fertilización mínimos y pasajeros en las hojas, la plantas se muestran saludables y firmes. Todavía sigo buscando la posibilidad de agregar overdrive la semana que viene. Todo está por verse. Ya puedo asegurar que va a haber una séptima semana de floración, sino debería empezar el lavado en 2 días, cosa que a la vista, sería muy apresurado. Así que seguiré esperando a ver las flores con los pistilos más secos. Entre tanto los tricomas ya están formados, pero recién van a empezar la maduración en unos días. No saco foto porque el celular no hace buen foco con la lupa, pero ya intentaré mas adelante. Día 35. Cierra la semana con una buena idea de lo que van a ser los cogollos. Según el calendario de la planta, debería empezar el lavado esta semana, ya que sería la última. Pero por la madurez de los tricomas, todavía le faltan entre 10 días y 2 semanas más. Así que se viene otra semana de sobrecarga de PK y voy a aumentar la dosis para aprovechar a medir el nivel de tolerancia de la planta a altos niveles producto. Al ser hidroponia y trabajar con el ambiente bastante controlado, confío en que voy a poder aplicar correctivos a tiempo, si empiezo a notar defasajes bruscos.

Last week only watering one time and let the plant dry our for 3-4 days. There is not much to trim as the buds are rock solid and big.

Start week 6 , Bio Grow 2 ml/L + Bio Bloom 2 ml/L + Sensi Cal-Mag Xtra 2 ml/L + CarboLoad 2 ml/L (Ph 6.7).

Whoa now big momma! This girls is gettin unruly and I need to get her into flower!! Unfortunately, I have to wait for the rest of the room, so this will finish at about 6" indooors!! Stick around to see!! Continuing to grow 3 main stalks and using some defo and LST to get it there Follow my son Budxless on his first GrowDiaries journey I go live in the Scroggernaut Sundays at 9:00pm EST- budxsmedical on insta

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme.

20.06 25. Day 30 Took some leaves off lower part of plant. Used plant training clips to bend branches in effort to LST. I will update tomorrow. One love 🏼

My first time making alcohol tintcure Using the c1 , Hold on tight gonna be a trip