Likes
Comments
Share
De momento van engordando y confirmando las sospechas aunque hasta que no corté no lo sabré del todo jajaja pero lo dicho, tiene pinta que va a ser de floración larga pero espero que buenas cabezas xD
Likes
14
Share
@Mr_Dior21
Follow
Man this week has been taking forever, my theory is it will only get slower relative to harvest just because my excitement. I top dressed with about 2 inches of worm castings with an eyeballed mix of 2tbps of bone meal (3-14-0, bloom fert.), 1.5-2tbps of Gaia green all purp.(4-4-4, I don’t have an actual potassium fert. Like leingbenite So I use this), 3tbps of dr earth kelp meal (1-.05-2 has many different vitamins, amino acids, carbohydrates) and 2tbps of mykos (for microbiology inoculation and nutrient uptake/upkeep). So I every time I water I have this old 2gallon water tin that I usually fill up about a quarter to half way full. Using this amount of water and the 5 gallon bucket of my soil mix makes my watering schedule once every 3 days (on average). I do use bottle nutrients but it’s mainly for the supplementing. For feeding I use 2-3ml to half a gallon for all bottle nutrients, I have never gone over, and I have never had deficiency’s that can hinder plant development. Deficiency's: PSA: Now if anyone happens to read and actually look at my plants please do look closely and maybe let me know if you see something that I have missed since I’m still very new. I noticed my plant was having a cal mag issue so that’s why I top dressed with worm castings, I also top dressed with about 3tbps of azomite (I feel using azomite it may help with all those unnoticeable deficiency’s that a new grower might miss). I’ve been noticing on some of the leaves the very tips are showing discoloring, since the color is still so vibrant mostly I can rule out nitrogen, phosphorus, Iron, manganese, and sulphuric. It’s still very early stage so I did an extremely light foliage feeding (in the dark to prevent UV damage) of 2ml of big bud, big bloom, and tiger bloom, mixed into half a liter of water, I then emptied the spray bottle and sprayed with tap water just to make sure there’s no nute burning. Today I fed the plant through water amendments with 3ml of big bud, 3ml of bud candy, 3ml of big bloom, and 2ml of tiger bloom;(my theory is hopefully the nutrient deficiency’s will go away) My soil mix is pretty basic. 40% coco, 10% perlite, 10% well composted chicken manure, 20% black gold compost, 20% worm castings. I’m not going to put the fertilizer amendment percentage to be honest I eye ball it but there’s a rough general measurements that I do.
Likes
12
Share
Empezamos cultivo. Semillas HUTZ de BaskTringleFarms Cruce: Zero x Gluerke 13 Semillas Regulares. Se usa tecnica de la servilleta para germinar. 13 de 13 germinadas en 2 días. Se pasan las 13 a Jiffy en un invernadero y en 3 días tenemos todas las semillas listas para trasplantar a maceta de 1L y meterlas en el armario. La lámpara LED TheJackson 250W es regulable por lo que los 2 primeros días esta al mínimo 20W. A partir del segundo día subimos a 50W. Lo mantendremos una semana. Por ahora un solo riego en el trasplante con Rhizotonic de Canna
Likes
2
Share
@TEKNOGROW
Follow
CONTEST TEKNOGROW BIG BUDDHA SEEDS BUDDHA TAHOE GROWER GIOVANNI
Processing
Likes
1
Share
@Esebees
Follow
Cambiamos de fotoperiodo y las plantas rápido han pegado el cambio y ya sacan los primeros pelitos
Likes
25
Share
@OGOZHigh
Follow
So letzte Woche wurden die Ladys nur noch mit Wasser gegossen, diese Woche auch und dann geht’s zum trockenen 🥦✌️
Likes
16
Share
So another week ticked off, with all going to plan so far. Plants all responding well to training (just lst & some tactical defoliation). All are showing their first pistils so expecting them to start stretching any time now. Only plain dechlorinated ph’d water so far into my home made dry amended soil / coco / castings mix. Will top dress at the next watering and perhaps a compost tea at the end of this / start of next week. As for the smoking, I have started to smoke a little of the strawberry pie auto from last harvest which is just starting to cure. I might even prefer it to the gorilla cookies, it’s so dank. Therefore a little bit cross with myself for not including at least 1 this round. Still, first world problems I guess. Anyway thanks for reading, have a great week. 😊
Likes
6
Share
The girls come back inside when the weather is uncooperative. Indoor temp is around 70 and humidity around 60-65%. Otherwise pretty much the same as prior weeks.
Likes
6
Share
@simoto
Follow
Popped, image 2 days later 😀 , added diatomaceous for gnat's and perlite
Likes
11
Share
Looking good! I gave up on #1&2 the soil was just a bad mix. Think Ill give it 1 more week until I start flower.
Likes
24
Share
Vegetation: To keep temperature and moisture on optimal levels at around 23°C / 65% I'm using two mechanical timers. - 24/7 on: Fans and water pumps (+Ventilation after 3.11.) - Timer 1: Lights and Humidifier 18h on / 6h off - Timer 2 (BROKEN 3.11.): Ventilation 18h (15min on / 15min off) / 6h off NOTES: Everything looks good and the roots have appeared from almost every (11/13) rock-wool cube. From now on I'll mostly water the plants from bottom by adding the wanted amount of nutrient solution on a plate, and then placing the plant on top of for ~15seconds This week I'm also starting to prepare the hydroponic systems (2x NFT-GT90, and 1x EBB-flow I think) and stronger nutrient solution since my plants are becoming ready to be transferred. Spreader-mat is the base of my plants when I have transferred them in to the hydroponic systems. DO NOT place more than one layer of the spreader-mat as it is not meant to be used like that! As you're cutting the mat for NFT's, be aware to have some extra for your peace to reach nutrient solution below the tray. That way you won't get noise from water dropping when systems are turned on. Day 15 (1.11.) Day 16 (2.11.) First watering with a bit stronger nutrient-solution (~ EC 0,6 / pH 5,9) than before, starting with 50ml/plant and watering once from above. Slowly increasing EC to 0,8. I cleaned and assembled 2 out of 3 hydroponic-systems which I'm going to use. I'll do the same also to the last system, but it currently has my plants on top of it so I'm going to do it later. I want to make sure that my plants have built healthy and big enough root system before transplanting to hydroponics. I'm waiting for the rock-wool cubes to be bursting of roots so they won't drown on their first day in hydro. Also, as the plants are bigger before the transplant, I'm able to fill my nutrient-solution tanks full with correct strength nutrient-solution for Mid-Vegetation from the start, therefore no need for that much adjusting later on. Day 17 (3.11.) I noticed my other timer which controls the lights had stopped working... The lights were on when they shouldn't have been, I noticed it an hour after they were supposed to turn off. I think I caught up to it early, but it may have been on for maximum of 2 days straight. No worries there since on vegetation-phase the plants don't necessarily need any sleep (Even though you should avoid quick changes like that!). Roots have appeared from the bottom of every cube and plants are looking pretty healthy. I think they are almost ready for hydroponics. Day 18 (4.11.) Few plants are showing symptoms of nutrient deficiences or some sort of sickness, not certain what exactly. I'll be keeping an eye on it. I'll be transferring in to hydroponic systems in maybe a week, so I don't want to stress my plants more than what's necessary. Increased my solution strength to 0,9 EC with a bit more Cal-Mag than before, and watered the plants for 50-150ml each plant depending on weight and size. I'll be slowly increasing the strength by around 50% during upcoming week. Thanks for tips! Day 19 (5.11.) Day 20 (6.11.) Plants are recovering well from deficiences and I just transferred all of them to hydroponics. I don't have the water pumps on for 24/7 just yet, at this point I water them a couple times a day by keeping the pumps on for somewhere around 15min at a time. Lights are now set to 60% and I also added a tower fan to circulate the air and shake the plants. Day 21 (7.11.) Lights are now set to 70% since the Led's and plants are spreaded wider in the tent than before. Distance to plants stays the same at 75cm.
Likes
8
Share
@Tontsekz
Follow
07-11 - Plants all looking healthy - good growth so far 08-11 - Plant nearest to the fan has bent over a fair bit - re-positioned away from the fan - bottom fan turned off - top fan still running 09-11 - Bent over plant is looking far better 10-11 - Watered with PH 6.02 water
Likes
2
Share
@ebone4206
Follow
Had some setbacks as expected since this is my first grow. I had her to close to the light and she wasn't getting taller. Now that I lowered her she's stretching. I had lst problems ,I just over did it and fimmed to many times to close together. She's happier now. I accidentally gave her the wrong feeding but she's recovering from that.
Likes
15
Share
This little Red Poison @sweetseeds is showing her dark pistols, just started her flower stage last night. Yes I topped this lady a few days ago. PH is a solid 6.0. Will definitely start some Fox Farm big bloom this week ✌️🌱✌️
Likes
18
Share
I'm pretty much on auto pilot at this point.. im still just feeding compost extracts to keep it simple. There's a couple things I want to point out this week; I've also included a video of my cheese auto and no extra cost to the reader 😅🤣 PROCESS/ENVIRONMENT CHANGES - I've lowered the temp inside my tent a little bit to help keep my VFD between a good range for flower (1.0 - 1.5). I also changed the RH on my humidity controller when the temperature goes down after the lights go off. It's kind of a hassle but it's the only way I can stay in the range I'm looking for. - I've started to raise the pH of my water slowly... I want it to be between 6.6. And 6.8 at this point. - I've increase all my lights.. my Sf4000 is at 85% intensity and both my Ts1000s are sitting at around 75% intensity. - I've increased all my fans running. My intake is maxed out, my exhaust is on '6' and my fans inside my tent are all maxed out.. the cheese auto is drowning my entire house out hahaha its crazy. -I've cut off a whole bunch of fan leaves, larf, bottom branches and a bunch of other unwanted stuff.. I'm hoping that she thickens up fairly like some of her sister's in the tent 🤞 cutting off all the unwanted junk might help at least move more air at the bottom of the canopy.. at most it will help direct energy to other parts of the plant therefore producing a better flower. If she does fill out I'll have to support her side branches so they don't fall over. - Every day I rotate the plants in my tent so that the get to experience the light in different ways. Add me on IG for more updates @Wrongholn519
Processing
Likes
6
Share
Time goed fast and this plant is growing beautifull buds that grow bigger day by day and i can't wait for this one to be done. four days ago i started adding the flower booster to the mix to get the buds nice and thick the development of the flowers is going great we have one plant with a very long stem and that one is turning into a big main cola pretty fast and the smaller nuggets are developing really nice although not all the plants look that good the flowers that they produce are perfect and i thing this is going to be my best yield from under this light i can't wait to find out i grew Spliff seeds in the past and got a great yield of those plants and it looks very promising besides adding the booster to the mix i did some defoliation last week this was the last time untill harvest to not overstress the plant That is all for now check out the pictures and the video Cheers, Nibameca
Likes
Comments
Share
@MrStarOn3
Follow
At the end of week 3 I topped one of the strawberry cough they are all looking good and starting to veg I’m all caught up with the grow diary’s and will add at the end of every week. I’m in Australia and did start a little late into the season but hope to get a decent grow in they will be at my brothers once transplanted and he has a few aswel that I will add into the grow log nothing but sun and water only use a little thrive that’s from Bunnings that I get from my pops shed. They will be in a nicer cleaner soil when transplanted into veggie beds and will have chicken poo as a nutrient source first time ever using chicken poo so see how it goes. Will keep the grow log updated and hopefully everything goes all well for the travel and transplant for the plants in the next few days
Likes
18
Share
week intel: every thing is amazing girls are ripening , we can now cause more e.c stress than before because: 1-plants are very mature now and can handle stress 2- at this week its the only stress that is helpful for increasing plant resins stresses : E.C stress around 1.6 and 1.7 3 times a week feeding: i replaced B-52 with Bloom Base Nutrient i feed them 3 times this week with this order : day 1 : i feed them high with base nutrients(calcium & micros (half dose) + Bloom) about 850 ppm - 1.7 e.c to cause a little stress. day 3 : i feed them high dose of Top-Max + Bloom Base Nutrient around 877 ppm - 1.7 e.c to cause stress . day 5 : i feed them high dose of Feeding Booster around 850 ppm - 1.7 e.c to cause e.c stress again guide of the week : last weeks are time of ripening , and the only helpful stress is e.c stress at this moment
Likes
6
Share
Started using a fish 5-1-1 (one Tbs /gallon) twice a week with a general 3-2-2 (1oz/gallon). Noticed some holes in leafs starting from underneath, had seen this a little last week and trimmed those leafs off or at least most of them. I notices different leafs were affected and was worried it mite be spider mites. In response I mixed 3 essential oils (Cedar Mint, Peppermint, & Melaleuca Oil) with some water (pH 6.25) but did not check the ph of the mixture in the spray bottle. I sprayed the leaves and underneath the leaves and the surrounding environment in the tent. May have put too many oils in the the spray or perhaps the mixtures pH was way off because when I went to check on them again the leaves looked sick. I haphazardly trimmed off the leafs that were ill looking but left the ones that were not as effected and were not drooping. Hopefully the defoliation will inspire Runtz (one with rocks) to grow more branches/ potential bud sights as well as to inspire Blue Cookies (Middle ) to spread out her branches some more to increase surface area. Team Cream (Left-side) was affected the least from the spray and didn't have to prune more than a leaf or two. Team Cream is definitely consuming the most water of the three, being potted first and was the largest clone initially. She is full of surprises in terms of how I think she'll grow. None the less she is responding to training fairly well. If I'm not mistaken I would assume she has more sativa traits than the other two due to her wanting to grow in hight opposed toeing bushy and branching out. IDK it might be how I trained her /got her. Runtz is second in water consumption and responds to training the best of the three, although some lower branches are taking time to develop. Blue Cookies is consuming the least amount of water and has the most run off. Possibly due to being potted a day or two later as well as being the smallest of the clones at first and also suffered the most nutrient burn durringthe 1st or 2nd week when I was feeding them too much.