Likes
Comments
Share
📓 Cultivation Diary: The 12/12 Flip & Transition Week 1 for rosin 1 for flower 📅 June 5, 2026 (Veg Day 17) Irrigation/Reservoir: Prepared a full 100L reservoir refresh. Nutrients: Kept the feeding aggressive with a double dose of vegetative nutrition (x2 Nutrient formula) to ensure the root zones and plant tissues are fully stocked with elements before the transition. Canopy Observation:the canopy is thick, uniform, and fully occupying the table space. The trellis net is officially filled out, and the lower branches are strong and rigid. 📅 June 6, 2026 (Day 1 of Flower / Bloom Week 1) The Flip: Officially switched the timers to a 12/12 photoperiod (Lights ON at 6:00 PM / Lights OFF at 6:00 AM). Schedule: First irrigation shot triggers exactly 1 hour after lights on (7:00 PM), followed by a shot every 1.5 hours. Volume: Configured the drip stakes to run for 1 minute per shot, delivering 5 shots total per day. This provides roughly 450ml per plant per day, creating excellent target dry-backs overnight to force vigorous root searching. 📅 June 11, 2026 (Day 6 of Flower / Bloom Week 1) Irrigation/Reservoir: Bumped reservoir capacity up to 110–120L to keep up with increased transpiration as the plants begin their post-flip stretch. Nutrient Recipe (TargetingpH 6.0 EC 2.5 Water: 110–120L Athena Cleanse: 120ml Silica: 220ml (Essential for stem strength during the stretch) CalMag: 10ml Athena Bloom: 600ml (Adjusting base to target 1.2–1.3 EC from Bloom component) Athena Core: 400ml Irrigation Adjustments: Increased the shot duration slightly to 1 minute and 15 seconds to match the accelerating growth pace. The early flowering stretch has officially begun. The tops are noticeably pushing past the trellis net layers, and the node spacing remains tight and stacked. Leaf color is an excellent dark green with healthy, bright yellow-green shoots driving upward at the growth tips. No signs of stress or stalling from the schedule shift.
Likes
4
Share
First week of Flowering!! the Scrogline pro's are filling up nicely and we hope is will develop an nice canopy with big sticky buds no changes in the nutrients yet but soon we will start adding Epic Bloom Stay safe and stay healthy Cheers, Nibameca
Likes
24
Share
Been another smooth week. A few of the plants are starting to show signs that they are moving towards to finish line. Seeing some swelling, pistils starting to brown, and some beautiful purples coming out in some of the buds. Been debating on giving them a dose of dry koolbloom, but I will probably just keep them running on the maxibloom until flush since they look pretty happy. It's hard to show this girls progress since shes in the far back corner, but shes stacking some nice golf ball size buds. I'm seeing some purple on some of the buds. Cant get in there to smell her either, but I bet yall wouldnt turn down a bud off her when shes ready🤣
Likes
9
Share
@Dormando
Follow
BEGIN WEEK 11 - Day 71 - 1/1 - Day 24 into flowering. 1+2 Fert Water. Day 72 - 1/2 - Day 25 into flowering. Soil pH seemed near 7. Needs more acidic soil. 6.0 pH Plain Water. Day 73 - 1/3 - Day 26 into flowering. Soil pH too high over ~6.8. Watered with 5.0 pH water. Day 74 - 1/4 - Day 27 into flowering. Fert Water 1 + 2ml. Day 75 - 1/5 - Day 28 - 4 Weeks into flowering. 5-6pH plain water. Day 76 - 1/6 - Day 29 into flowering. 5pH Plain Water to adjust soil pH too high over 6.8; almost 7. 0.5+1 Ferts added. Finally pH restored to 6.5. Day 77 - 1/7 - Day 30 into flowering. Feed 5pH Plain Water. END WEEK 11.
Likes
7
Share
Potted then up to 4ltr pots ready for flowering ✌️ switched to 12/12 on day 35
Likes
6
Share
3 plants. 2 are are rather small at this point. 1 is pretty beefy.
Likes
6
Share
Que pasa familia, vamos con la cuarta semana de floración de estas Wedding Cheesecake Fast Flowering, de FastBuds. Agradezco a Agrobeta todos los kits obtenidos de ellos 🙏. El ph se controla en 6.2 , la temperatura la tenemos entre 21/24 grados y la humedad ronda el 50%.Tienen un color espectacular, estan a 12-12, iremos viendo cómo avanzan. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨
Likes
11
Share
Čus všichni Konec 8 týdne kvetu Protože zase smrdím ve zkurvený práci Tak kytky musí počkat na mě ať jsou trichomy jaký jsou Očekávám úplnou jantarovou komnatu 😂 Čtyři prásky z brka a pád do bezvědomí Jakmile to uschne pojede to k Hombrému na měření Mějte se krásně a ať to roste 👍🏻
Likes
57
Share
@Zengrower
Follow
The Fruity Donutz ladies started blooming a few days ago. And with the bloom, they vigorously grew in height as well. Unlike last grow I now stopped with the Alga Grow in time so there's no sign of Nitrogen burn, just really abundant growth. The nematodes are doing their job in the soil and the black fly polulation is slowly decreasing 🎉 . The plants do not stretch as much as I feared so I'm going to let them grow without LST. The branches are naturally filling up the empty space in the GTools so I'll let nature follow it's course (as long as the course leads to rock hard buds obviously 😅). Stay tuned for more pics and updates later this week ✌️😊 🌿🌿🌿 Mid-week update Since the Fruity Donuts were stretching like crazy. The top leafs started showing signs of light stress and I had to think of a solution. One was supercropping the plants, but it felt like a bad idea. HST also has an impact on the plant growth, and both ladies are blooming now. I couldn't raise my light any higher because of the suspension system, but after a good vape I took a closer look at the clips and came up with an idea. By directly hooking the clips to the top of the GTools I got at least another 15cm of extra vertical space 🙌 . Now the plant has enough space to gorw a little bigger and the buds are safe from lightburn.
Likes
29
Share
***Note that I started to count the days when I placed the seeds between paper towels. The seeds were planted 3 days later and sprouted from the ground 2 days after being planted. D63 (26/04/2021) : I top dressed the soil of every pot with Gaia Green power bloom 2-8-4, earthworm casting, bone meal and shrimp compost. I think it was a bit late in the flower to top dress the Glue Gelato. From now on I will only give water. D66 (29/04/2021): I saw more calcium deficiency but on the Banana Kush this time. She is really close from the light and I think this is why the closest leaves got some rust brown ish spots. The lamp under the Banana Kush and the Gelato is higher now. I made a gallon of home made organic CalMag supplement with Epsom salt, crushed egg shell and molasse. I gave all 3 plants 200ml of home made CalMag when watering them. I will gave them approximately 100-150ml of this CalMag supplement every other watering. D69 (02/05/2021): The smell is crazy 😍 It smells soooo good! The house is starting to smell strong too 😳😅. - Light: the lights are at 100% and at 12 inch form the plants. - Temperature: during the day: 24-26C ; during the night: 20C. - Humidity: the humidity is maintain around 46-48% all the time. - Air circulation: There is an oscillating fan on the ground, one fixed fan pointing on top of the canopy and one fixed fan to help cool the lights. - Water: I gave water every other day or when the ground feel dry or the pots feels light.
Likes
11
Share
Thick luh mas. Some the White wedding phenos all outperformed my custom bred seeds. I’ll be sticking to a legitimate breedeer drom here forward Most plants have all white hairs 3 plants are crazy dense and beautiful Other plants are showing why a pheni hunt is impor
Likes
53
Share
@AutoCrazy
Follow
This fine lady has entered into flowering with a bang. She is stretching out like a champ!! She is drinking 7 gallons every 2-3 days now. I will likely increase watering to 10 gallons soon enough. I have been spraying with OMRI fungicides every 3-4 days and I haven’t see any issues yet 😎 I may throw a little top dressing down (my own little flowering mix). We will see as the week goes. I can’t wait to see more growth from this sexy lady. 😎🍿🍻🌱
Likes
11
Share
@CocoLogic
Follow
Sept 13th: (F27) Fertigation once a day with same recipe (1200 EC 6.1 PH) watered until 10-20% run-off Sept 14th: (F28) Fertigation once a day with same recipe (1200 EC 6.1 PH) watered until 10-20% run-off Sept 15th: (F29) Fertigation once a day with same recipe (1200 EC 6.1 PH) watered until 10-20% run-off Sept 16th: (F30) Fertigation once a day with same recipe (1200 EC 6.1 PH) watered until 10-20% run-off Sept 17th: (F31) Fertigation once a day with same recipe (1200 EC 6.1 PH) watered until 10-20% run-off Had to supercrop 1 branch on the PE#2 since it was almost in the roof of the tent Sept 18th: (F32) Fertigation once a day with same recipe (1200 EC 6.1 PH) watered until 10-20% run-off Sept 19th: (F33) Fertigation once a day with same recipe (1200 EC 6.1 PH) watered until 10-20% run-off
Likes
43
Share
Martedì 20/02/2024 Inizio controllo 2027 ec 5.5 ph Cambiamo soluzione e iniziamo con i nuovo dosaggi da prefioritura Aggiungiamo 75 lt demineralizzata Base 285 ec 7 ph Aggiungiamo i nutrienti per 80 lt 160 grow 160 micro 120 bloom 90 sensizym 90 calmag 90 rhino skin 90 bud candy Otteniamo 2146 ec 6.3 ph Aumentino al 100% la nostra mars hydro fc6500 e la teniamo a 30 cm di distanza.
Likes
4
Share
Ende Woche 7. Ich habe die Gute ordentlich entlaubt, mini Buds entfernt und alles so hingebogen, dass es gut Licht bekommt. An Tag 48 gab es 2,5 g Pflanzengeflüster (Harpin-Protein) auf 1 L Wasser als Wurzeltränke, da ich so weit in der Blüte nichts mehr sprühen möchte, obwohl Harpin über Blattdüngung viel besser wirkt. Beim ursprünglichen Mix der Erde hatte ich einen Denkfehler bei der Düngermenge, daher wurden die fehlenden 200 g jetzt noch oben aufs Substrat gegeben und dann mit frischer Erde abgedeckt.
Likes
3
Share
@fadagrow
Follow
Week 2 is cruising along, and the lady is looking strong and healthy 💪🏼. Feeding her the full Canna suite with the pH locked at 5.8 and watering every 3-4 days. Everything's on track with no major updates—next week, I'll kick off LST!"
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 REMO NUTRIENTS 👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
35
Share
🍼Greenhouse Feeding BioGrow & Bio Bloom ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ by VIPARSPECTRA (models: P2000 & XS 2000)
Likes
7
Share
@NO_DRAMA
Follow
Very strong plant 💪 Bravo Inseedious👏