Likes
Comments
Share
@Mxrcel09
Follow
Had to Chop. Consistent RH of 65% the last few days. Dont want to risk the single plant to be moldy. In better environment I would have gave her another week to ripen. Smells very loud! Fruity, tropical smell with gassie Zoap. Very excited to smoke it. Will dry it in the tent. Currently at 62.3% RH + 22C (cant get it cooler). Will Update after 2 weeks cure 🙏🏼 Dry weight: 98.5g / 1 plant
Likes
25
Share
@Rob691
Follow
D-37 : Done the third topping, but I broke one of the branch of the most healthy Desfran :( I'm very sad about that so I will try to do a fourth topping to have the good amount of flowers. The others are going well ! D-43 : Everything still ok ! The LST is almost over, and I think I'll turn to flowering mode winthin 10 days max.
Likes
16
Share
@MrWolfe
Follow
Everything went well, make sure to keep prefilters clean on water lines, doh.
Likes
15
Share
Put them both into 10ltr pots at the end of last week. The sun hasn't been about to much so they haven't done much but they are getting taller and stretching a bit. I've got more seeds but will probably take cuttings from these two as they will be more mature and must be closer to showing sex 👍
Likes
8
Share
Esa familia, ya estamos de vuelta, y es que me sorprende en primer lugar la intensidad de luz y lo bien que crece cada ejemplar, no da casi calor así que para el verano irá de lujo. Nuestras candi caramelo acaban de terminar su 3 semana y es que pronto trasplantaremos a macetas de 7L, controlamos la temperatura, y la humedad la tenemos algo baja pero sin problema alguno, estás candy caramelo de Zambezaseeds están comportándose muy bien en interior, pronto cambiaremos el ciclo a 12/12 , en nada pediremos la tierra y al lío. Www.mars-hydro.com web: http://bit.ly/2uJAjgy ts600: http://bit.ly/3cnv0Ev code: an420 La semana que viene más y mejor buenos humos fumetillas
Likes
9
Share
THERE IS 4 PHOTOPERIODS LEFT IN THE 5X5 TENT. I WILL BE MOVING ALL OF THE PHOTOPERIODS INTO THE 8X8 TENT ONCE ALL THE AUTOFLOWERS ARE DONE, THEN I WILL SWITH THE LIGHTS TO 12/12 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
25
Share
Weather was already cold, she has long flowering for our climate.
Likes
13
Share
Started on Growdiaries at week 7 of flower. Back at the start there were four plants. Two were feminized and the other two turned out male. Unfortunate because those were the two Scooby Snacks. Actually the showcase plant. Playing the odds didn't work out for me this time. :) Two remaining plants started off at large size difference. Liberty Haze was almost twice the height of the Super Skunk. Used LST early and topping late in veg to control the canopy. Overall I got them to a pretty close height. The combination of the lolipopping and SOG produced some monster buds. Of course genetics helped but they were much larger than previous grows. The tent and the environment stayed nice and consistent throughout the grow. No unexpected incidents other then the two male Scooby Snacks. Used an updated Heavy 16 feeding schedule which seem to make the girls pretty happy. They both have been chopped and are hanging for 7 days-ish. I will take some pictures and give a taste review then. Sorry the pictures and video are so poor.
Likes
3
Share
@Grow4ever
Follow
Week 3 continued with good and steady growth. Yesterday I started to train the plants head with LST to the back for more even canopy in the end.
Likes
41
Share
Salut les Growmies Déjà la fin de la seconde semaine de floraison .Cette cross est magnifique avec des feuilles plus grosses que ma main. Avec une croissance très vigoureuse,🦄🌈🎠Comme attendu d elle l'a Unicorn Sherbert fait rêver j ai hâte de voir ces sites floraux s épanouir.🦄🌈🎠
Likes
37
Share
@RFarm21
Follow
Boas growmies! Penso que a royal gorilla #1 quando completar 10 semanas posso começar o flush. 10/08/2021 - O gráfico representa a nutrição misturada em 2,5L de água da Royal Gorilla 1. EC = 1,32; pH 6,2 ;10/08/2021 - Alimentaçao das Royal Cheeses (4L): CE = 1,34mS; pH 6,2 -BioGrow - 7ml; BioBloom - 5,5ml; TopMax - 5ml; BioHeaven - 6,5ml; Activera - 6,5ml; Calmag - 1,5 ml Alimentação Royal Gorilla2 (2L): CE = 0,67mS; pH 6,4 - BioGrow - 0,5ml; BioBloom - 3,5ml; TopMax - 12ml; BioHeaven - 1,5ml; Activera - 3ml; Calmag - 1ml; Reduzi o nitrogenio (biogrow e bioheaven) porque as folhas parecem muito verde-escuro. --------------------------------------------------------------------------------------------------------------------- 13/08 - Alimentaçao da Royal Gorilla #1(2,5L): CE = 1,37mS; pH 6,1 -BioGrow - 3,5ml; BioBloom - 5ml; TopMax - 3ml; BioHeaven - 6ml; Activera - 5,5ml; Calmag - 1 ml; 13/08 - Alimentaçao das Royal Cheeses (4L): CE = 1,33mS; pH 6,3 -BioGrow - 8ml; BioBloom - 7ml; TopMax - 5ml; BioHeaven - 8,5ml; Activera - 9ml; Calmag - 2 ml; Alimentação Royal Gorilla2 (2L): CE = 0,70mS; pH 6,1 - BioGrow - 0,5ml; BioBloom - 4ml; TopMax - 2ml; BioHeaven - 5ml; Activera - 4,5ml; Calmag - 1,5ml;
Likes
13
Share
@Broffel
Follow
Its going amazing, start this week with flawless finish. Day 52 and it going amazing, buds getting bigger and bigger. I also made a clone of the purple lemonade and she is doing also amazing in my small grow tent
Likes
8
Share
Plants are still thriving well. Watered after topping w/ proper rate for week for according to schedule PH water to 6.2 and soak pots. Temp stays high above 75 degrees humidy same until tent is opened led at 50 percent about 20 inches away
Likes
13
Share
This week has been great for this tester she went through her flowering stretch and it's now ready to fatten up!! Switched to bloom formula and she's loving it! From the top view it's hard to tell she was ever topped!! Below are the days of activity from this week: Day 46 1 gal distilled water 5g bloom ppm 513 Pulled 5 leaves Day 49 1 gal distilled water 5g bloom ppm 544 Pulled 12 leaves Day 51 1 gal distilled water 6g Bloom ppm 645 I'm very excited for this tester grow, it's extremely enjoyable watching these develop and mature. Hope everyone has a wonderful day! Happy growing
Likes
10
Share
@TeesTrees
Follow
Day 71 - I watered her with nutrients, PH was at 5.3. Plant looks very healthy. I think i need to get some stucks to support stem. Day 72 - Checked in the morning properly, the plants looks fine checked for hermies couldn't see anything. Day 73 - I checked her today again nothing that can ruin the whole crop. She was watered with nutrients today at PH 5.9. I got new lights today spider farmer sf2000, this looks amazing inside there. We have also done a bit of light Defoliating so the buds have more nutrients. Day 74 - The plant is fine but the temperature is very high after getting new lights its on 34°c I've order a new fan so i can have inlet and outlet to try cool it down. Day 75 - The plant looks a bit sore thats because i should have watered her earlier. I've given the plant 5.5PH water with nutrients. Day 76 - So once again i didn't take a picture today.  I was very busy and didn't have time. I checked the plants as soon as i woke up and they looked well and healthy. Day 77 - Plants looks well would like it o look like its gonna give me a half decent yield but i don't know let's see how it goes. I also watered her today with nutrients and the water Ph was at 5.5.
Likes
15
Share
@No_Clout
Follow
I think they have finished stretching as their starting to produce bud sites, so hopefully they stay around this size as it’s the sweet spot for me, not too small but not huge trees, their still just under 1m tall.
Likes
19
Share
Legend Timestamp: 📅 Measures: 🛠️ Water: 🌊 Actions: 💼 Thoughts: 🧠 Events: 🚀 ________________________________ 📅 D36/V34 - 28/09/23 🛠️ 🌊 💼 New LST - Made Timelapse of the grow 🧠 🚀 ________________________________ 📅 D37/V35 - 29/09/23 - 🛠️ 🌊 💼 LST on the younger lady. 🧠 🚀 Marlene Senior is pre-flowering ________________________________ 📅 D38/V36 - 30/09/23 🛠️ EC raised to 1.2 pH is stable to 6 🌊 Added 5L and nutes 💼 🧠 🚀 ________________________________ 📅 D39/V37 - 01/10/23 🛠️ 🌊 💼 LST again on the younger and HST on her main bud 🧠 The bigger one is ok for now, I'm going to let her grow normally a little bit 🚀 ________________________________ 📅 D40/F01 - 02/10/23 🛠️ 🌊 Added 2L water and nutes 💼 LST on Marlene Junior and a little bit on the older as well 🧠 🚀 ________________________________ 📅 D41/F02 - 03/10/23 🛠️ EC and pH are both stable 🌊 Added water 2L 💼 Made timelapse of the last nights 🧠 She's drinking a lot, I need to understand how to manage the flowering stage 🚀 ________________________________ 📅 D42/F03 - 04/10/23 - 🛠️ 🌊 💼 Big Defolation and strong LST 🧠 Maybe the last training before full flowering stage 🚀
Likes
100
Share
The journey for this lady is over! She is huge and gorgeous, the buds seem rocks just by touching them!
Likes
28
Share
It's officially week 4 of veg. What a ride! These ladies DO NOT give up and neither did i. Second grow, it is a learning curve. With all the growth stunned, i am a bit impatient. BUT the good news is the smallest have starting growing again. Anyways... 👽👉19/9 New automation program for this week. (See pictures for app screenshots for automation and datalogger) Temps - 21night/29day RH% - 60RH night / 68RH day My plan is to decrease the humidity at night, to increase the vpd. The same goes for my light output and nutrients. Changing the variables gradually over time. 👽👉20/9 I topped two more plants. The growth is gradually getting better. They should be ready for their first real feed tomorrow. (Only top fed them last watering) 👽👉21/9 ** First real feed. -They reacted well to a last lose dose top feeding, so this time i will give them a full feed, but same low dose. -Programmed new automation based on VPD Graf (see pictures) Set to 1.0 VPD. // Inkbird app, i am adjusting the RH% to the temp in the tent. -Did some experimental LST on one of the smaller ones. Dont have a co2 meter, but have co2 bag. But it has not been added as a variable to the climate calculations. 👽👉22/9 The new automation program has proven efficient and working(for now). Now its interesting to see the plants adapting the constant VPD. 👽👉23/9 Did some more LST work to keep the tallest ladies at level. 👽👉24/9 Visiting the ladies and checking up on the lst work. Tucking in leaves, plotting my next move. *Water day. they shared 5 Liter, where the bigger ones got more. PH 6.4 - EC 1.52 (Last water was PH 6.4 - EC 1.37) 1.5ml/L Bio heaven+Bio fish. (Next time they will get 2ml/L) 👽👉25/9 Turned up the lights from 75% to 100%. Temps are about to rise higher. might as well let the ladies get used to it.
Likes
4
Share