Check the winners The Grow Awards 2026 🏆
Likes
Comments
Share
She's starting to get bushy. She responds extremely well to stress so Im going to give her some heavy LST this week and give her rest next week. She also got some very healthy roots thanks to the hydroguard. I can easily go two weeks with no rez change and algae and fungus are nonexistent.
Likes
19
Share
@GrowGuy97
Follow
Day 57 - This lady is doing AMAZING! Almost the tallest plant in my tent & was the smallest when it went into flower! Looks & smells amazing already can’t wait to see how she turns out! Will definitely be getting some more strains from Spliff Seeds!👍🏼 Thanks for following & happy growing friends!✌️🏼🙏🏼🌱
Likes
21
Share
@NG420
Follow
Fattys are growing and seem to be thirstier.Used foliar spray to help the leaves and also started tucking. When the plant was topped pistils were seen for first time.
Likes
14
Share
@AndrewC
Follow
This week, I tried to LST them in the beginning of the week, but the stalks were flimsy and weak. I put a fan on them with a significantly more vigorous wind :) This helped, then I tried to LST train with my bending clips, the distance between the nodes was still to close. So I raised the light 2 inches, which helped, I figure by 2-3 days from now, I will be able to start the proper LST. I also flushed the res and put in new water and nutrients. Some of the plants are showing what appears to be Cal/mag deficiency. So I added an increased dosing into the res, I then took about 10ml of the mix and put it into the small res's at the bottom of the AutoPots to give a boosted dose to the plants directly. Other than that, this grow is *boomin*. I'm very happy with the progress, and these plants are thick, bushy and growing like crazy.
Likes
18
Share
my dry and cure style is this: 4 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 4 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. buds are one of the hardest as fucking rocks type of buds! very dense , compact , sticky , smelly , amazing at every aspect growing stage was 56 days and flowering stage was 75 days total (harvested tops at day 64th) the total weight of dry buds was : (plant #1 & #3 top buds 56 G + lower buds 22 G ) 78 G + (plant #2 top buds 47 G + lower buds 18 G ) 55 G + (plant #4 top buds 120 G + lower buds 67 G ) 187 G = 367 G
Likes
12
Share
@Visions
Follow
The purple pheno looks to be a easy 56 to 63 dryer. Green phenos same maybe slightly longer as well as the light pink pheno. They smell phenomenal from the chosen parents and are putting off a fucking show. These f2s were a treat to make. Thanks everyone for tuning in. I'll be putting more details within harvest time for each week as I have been quite busy testing other genetics as well as more of mine own. I will have a few packs of F2s I'll be releasing via email later on to the public. These are fully tested and I will continue to test. Harvest will have the full details as well as the stressing and findings during my testing. I'm seeing us go to day 63 for the group. Around 10 days more.
Likes
3
Share
Week 12 for Fuel D.OG by seedsman She's really starting to pack on the weight & the smell. Getting fed Plain water every 3/4 days. Shes one of the ones packing the most bud size at this age 😎
Likes
1
Share
@PotCasso
Follow
Week10: 500-400ml 18hrs Light! (RastaJeff) Loud loud loud
Likes
16
Share
Aug 17: Auto Overdose is a nice plant but it’s not an auto. I started this one late and only topped it once thinking it was an auto. Other growers have noticed it isn’t an auto too, so I forced it in the dark garage. Flowering has to be started by the end of July here or it won’t finish in the fall. The flowers are forming quickly and I suspect this is actually Overdose Fast. So far so good, and good genetics for a Fast plant. Aug 18: no UV light today unfortunately but it was decently sunny. Scrog net certainly seems like a good idea. This plant is asymmetrical because I broke one of the two main stems a couple weeks after topping. This changed the shape of the plant so it’s become one-sided as if I was growing it up against a wall. Lots of nice lower branches came up so she looks pretty good now.
Processing
Likes
14
Share
Aug 16th week 2 PH = 6.2 PPM = 940 Aug 18th PH = 6.2 PPM = 940 Aug 22nd She is growing great
Likes
Comments
Share
@VTR90
Follow
So far so good, pics are from the last 2 weeks. Not been on top of the diary this time, but will keep updated when I
Likes
12
Share
This week I had to remove my red light (sad because red leds are the most efficient one in terms of pffd per wattage) the reason for that is bleaching of the tips. Scientists found out that cultivars start bleaching if u hit 600 umol/m2/s red light (just red photons and not every strain bleaches). Besides that I did nothing to them. From now on I will try to keep the temps low but with a pretty small day/night temp difference. Now preservation of terps and maturing are my points of interests. Some nice colours are getting through … that was supported by some nitrogen deficiency. This was Not on purpose but better than burning them with nutrients. (Nitrogen is required to produce chlorophyll, which is Green. If u reduce the nitrogen towards the end you can support other pigments to come through.) Conditions of the Grow: 💡 PPFD: 1000 umol/m2/s ☀️ DLI: 43 mol/day 🌓 Lightcycle: 12/12 h 💨 Humidity: 45-50 % 🌡️ 🌞Daytime Temp.: 23-24*C 🌡️ 🌙Nighttime Temp.: 21-22 *C 🌡️🌱Leaf Temperature: 21 *C 🌡️💧Water Temperature: 19-21 *C Water TDS: 1000ppm | EC: 2000us/cm 🚰Watersource: Rainwater (TDS: 15ppm | EC: 0.03 us/cm Flowering Equipment: 🔦 Lamp: Mars Hydro FC-E6500 📤Container: 3x DIY 63L Euro-Box with lid Pot: Netpot 2 inch 💦Pump: M.R.S. Ultimate Whisper Powerpump 22 bar 🚿Nozzles: 12x 0.3mm 🫧Waterfilter: 150 microns 🌬️Fan: 3x Clipfan 🌪️Duct-Fan: AC Infinity 200 mm with Controller and Carbon Filter 🍶Nutrient Brand: Terra Aquatica 🔬Sensors: Waterstation (EC, TDS, Temp, PH, Salt), CO2, Air Temp. & Humidity (VPD), Temperature-Sensor Root Container
Likes
48
Share
~ WEDDING CHEESECAKE FAST FLOWER by FastBuds ~ Well fam, here we go again with another epic strain from FastBuds Fast Flowering stable. After having such tremendous success growing their Gorilla Cookies Fast Flower outdoors last year, I've decided to run another of their fast flowering strains outdoors this year... Wedding Cheesecake Fast Flower! The best description of this awesome cultivar comes directly from my friends at FastBuds which is as follows: "A delight for the mind and body: Wedding Cheesecake FF (Fast-Flowering) is a delicious strain that offers XXL yields in a 7-8 weeks flowering cycle. This terpene powerhouse produces loads and loads of mouth-watering vanilla-creamy-cookie-scented terps with hints of citrus and cinnamon. In addition to its delicious aromas, this variety grows very well in both indoor and outdoor setups, yielding up to 650 g/m2 without extra maintenance, making it the ideal strain for beginners as it allows you to maximize yields while minimizing work. This super-fast feminized photoperiod version offers upbeat and energetic yet deeply relaxing effects that are perfect for consumers looking for a heavily focused, motivating, and creative high. It’s the ideal strain for those needing that extra energy boost to start a busy day on the right foot. Wedding Cheesecake FF boasts chunky, large-sized buds with a thick layer of silvery-white resin and bright orange hairs scattered all over: that just screams ‘quality’. The lime-green flowers sparkle with an array of hues ranging from dark to light green, to magenta and purple, and reek of a delicious aroma that’ll remind you of fresh store-bought cheesecake. This is an XXL hybrid that grows extremely tall in height, reaching up to 3m with one huge main cola and multiple long side branches that can withstand enormous yields of up to 650 g/m2 with ease. Wedding Cheesecake FF is extremely resilient to the elements and can be grown in almost every climate as long as you’ve got the space and basics covered, making her an excellent choice for those looking for large-scale harvests with a quick turnaround time without much effort." ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: This is going to be an outdoor grow, but I have started the Wedding Cheesecake FF indoors as our weather is still too cold to put her outside (nighttime temp's dipping regularly into the 30's℉). The plan is simple... let her grow inside under a 19/5 light schedule until the nighttime temperatures stay above the mid 40's℉, at which point she'll be moved outside and transplanted into the soil which I have already setup and inoculated with beneficial microbes, and then let the fun begin!🤪💚 ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 4/4- Here we go into the second week of life for the FastBuds Wedding Cheesecake FF, and she's doing really well! All I'm doing right now is making sure that her medium remains moist, watering only when necessary. I'm checking her root development daily and she will be ready to transplant outdoors any day now! 4/6- Today is TRANSPLANT DAY! I moved the Wedding Cheesecake FF outside to her prearranged 'new home' which I had previously prepped by adding some Coco/Perlite into the soil to improve the texture and drainage. I then pre-amended the soil with Gaia Green 4-4-4 All Purpose slow release dry amendment along with 3g of Wiggle Worm castings, 2 cups of ground Alfalfa and 1/4 cup of Extreme Gardening's MYCOS. After which, I kept the soil moist to allow the microbial colony to populate for a week. To transplant, I first made a hole then placed a Solo cup in it to make sure that the depth was adequate, then packed the medium up against the cup firmly which leaves a nice Solo cup shaped hole in the ground. I then wet the inside of the hole that I formed and coated the hole with Extreme Gardening's MYCOS root enhancer, after which I removed the Wedding Cheesecake FF from her Solo cup and placed her snugly into her new home! After planting her in the ground all that was left to do was lightly water her in... Let the fun begin!🤪 4/8- The Wedding Cheesecake FF from FastBuds is doing extremely well in her new environment. To be quite honest I was slightly hesitant to place her outside this early as we are only getting approximately 13 or so hours of sunlight daily. Based on my experience last year growing a Gorilla Cookies FF, which was placed outside at a similar time and did extremely well, I went ahead with the transplant, confident that she would be just fine. 4/11- I'm watering around every 2-3 days right now using water straight from my well through a garden hose... super simple! I do not worry about PH as long as the water isn't chlorinated and is good enough for me to drink, it's good enough for my plants and the microbial colony in the soil will adjust the PH to where they need it and at the same time provide the nutrients that the plant requires... again, nice and simple. Well there goes two weeks for this little lady. The next coming weeks should see an increase in size and vigor as long as the weather cooperates... fingers crossed!🤞 Thank you for checking out my diary, your positive comments and support make it all worthwhile! 💚Growers Love!💚😎🙏
Processing
Likes
1
Share
Super super frosty and sticky nugs, very dense and compact, big calyx, stinks, beautiful strain to grow the 2 plants of wedding cake Auto I have got the same aroma, this girl is being fed using nothing but a good soil prepared organically with complete organics by guanokalong and also seaweed powder, and also I added florians livings organics which is such an awesome organic super food for the plants that makes the strains performer better when when it comes the time to smoke you don't feel all that chemical stuff. Thank you so much everybody hope you enjoy! 💚🌱🎂✌️
Likes
7
Share
Still looking great sturdy strong and very green and very pest-resistant .
Likes
22
Share
@Aedaone
Follow
The temperatures, humidity, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil. Day 1 we had partly cloudy skies, low humidity, and temps in the lower 80's. I watered about 1/4 gallons from the water hose for each pot. Day 2 we had lite showers in the morning, partly cloudy skies and temperatures in the low 80's the remainder of the day. The rain provided the water today. Day 3 we had showers in the early morning until afternoon. Then it was mostly sunny with high temperature around 79. I noticed a few spots of powdery mildew on the leaves. I removed the leaves. Day 4 we had lots of sunshine and temperatures in the low 80's. I watered about a half gallon out of the water hose. Day 5 we had thunderstorms, rain, and drizzle early morning and intermittently throughout the day. Temperatures were in the lower 80's. Day 6 we had thunderstorms and rain in the morning, then rain and drizzle intermittently throughout the day. High temperature for the day was 71°. It was raining so much I brought them inside. They've proven very resistant to boytritis, but this close to finish, I'm not testing them further. Four hours of rain in below 70°F temps at night is tuff enough. Day 7 we had lots of sunshine and high temperature around 84°. The #2 plant had a very mild outbreak of powdery mildew on the lower leaves this week. The #1 plant has proven immune. These girls are nearly finished. They've gotten loud smelling. The #2 plant smells like straight cat piss and very loud. The #1 plant smells like fruit roll ups berry and loud. I'll harvest these sometime next week. Over a very hardy strain that's taken a beating in the Ozarks Spring.
Likes
11
Share
Likes
16
Share
5/28 I think she's about to go off. 6/2 she's been droopy leafed for a bit. I backed off on nutrients for over a week. I thought it may have been overwatering but at the same time I don't want to kill off the microbe life in my soil right now by letting it get overly dry. I'm more experienced with coco and the dry back is more aggressive and intense and with soil it's a little different and slower but it als9 cant dry back as
Likes
13
Share
@Hashy
Follow
This week has gone well. 6 plants in such a small space is playing havoc with the humidity but I feel I'm just about on it enough not to cause any rot. The strawberry gorilla is also developing quickly. The HST doesn't seem to have effected it at all. This is another strain in the tent that may finish a bit before it's 90 day schedule time. ******competition time****** I have an extra pack of 3 seeds of this strain that I'm willing to give away to UK growers. To win this pack all you have to do is guess the dry weight and put your guess in the comments. Closest guess wins the seeds. Notes. Extractor settings. Temp 28c step 2c Humidity 50% steps 2% Max speed 8 Min speed 1 Day 43 Saturday 15/10/22 Feed= autofeed 2hrs Volume= 10L, Ec= 1.51, PH=6.2 Left= 4L, Used= 6L = 1L each Runoff= 0L, Ec= , PH= Lifted light 4cm Day 44 Sunday 16/10/22 #5 H=CM, D=CM, DLI=37.4 PPFD=519 Day 45 Monday 17/10/22 Feed=autofeed 2.5hrs Volume= 10L, Ec= 1.5, PH=6.2 Left= 2.5L, Used= 7.5L =1.25L each Runoff= 0.7L, Ec= 2.3, PH=6.1 Big defol on all 6. Humidity to high really. Day 46 Tuesday 18/10/22 Extractor settings. Temp 26c step 2c Humidity 55% steps 2% Max speed 10 Min speed 1 #5 H=CM, D=CM, DLI=35.8, PPFD=498 Day 47 Wednesday 19/10/22 Feed=autofeed water 3hrs Volume= 10L, Ec= 0.2, PH=6.2 Left= 1L, Used= 9L = 1.5L each Runoff= 1.8L, Ec= 2.2, PH=6.1 Day 48 Thursday 20/10/22 Day 49 Friday 21/10/22 Neutral 0.1ml/L Silicon 0.75ml/L Calmag 0.25ml/L Bloom 3.0ml/L Boost 2.0ml/L Pk boost 1ml/L Ec 1.85 Ph 6.6 Feed=autofeed 3hrs Volume= 10L, Ec= 1.85, PH= 6.6 Left= 1L, Used= 9L = 1.5L each Runoff= 1.8L, Ec= 2.12, PH=6.1 #5 H=60CM, D=40CM, DLI=35.4, PPFD=492 Viparspectra xs2000 75% power 7 days £0.30 /Kwh = £7.56 for the week. Thanks for stopping by. Take it easy.