Processing
Likes
Comments
Share
@
Follow
Likes
410
Share
The gals are still loving the fc4800 and their new 8x8 mars hydro grow tent as much as I do👍 leaves are sticking straight up towards the light. Love how easy the zippers are to open and close. Nice and strong and guaranteed to last. It has extra material on the backside of the zipper that helps for light leaksand enough ports and vents for anything you need in it👍. the tsw2000 is still going strong and is also a very good light. Its been going almost nonstop for 6 months and still working the same as when I got it👍. not much heat off both lights but the fc4800 is alot cooler and the heat-sinks work extremely well. I have it daisy chained to the tsw2000 and 1 dimmer controls the other and i don't need to be reaching in too far to dim the other light, it's awesome and I can't wait to buy more lights to daisy 4 together👍. I would recommend this light to everyone that grows with leds and have trouble with temperatures getting too high. Even if you grow with HPS lights I think any mars hydro light is a MUST TRY. I like how heavy both lights are because I know it means they are built soild and strong 💪. FOR EVERYTHING MARS HYDRO VISIT: Www.mars-hydro.com PROMO CODE: rocknroll Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
9
Share
She smells so sweet and citrusy it makes my mouth water whenever I check her, I think she’s not got long to go, every bud is nice and big by my standards grown with no issues throughout just in flush now to get ready for harvest time. Patience is key
Processing
Likes
10
Share
@BodyByVio
Follow
After 21 days in turbo cloner I transplanted 4 Sweet seeds Green Poison into 1 gallon plastic pots filled with Cana coco. Few days later I transplanted another 4 clones into DWC! Stay tuned! Coco feed at 700ppm Dwc feed at 480ppm
Likes
7
Share
@Unpluggy
Follow
Hi there Friends🕊️ Last week the Banana‘s left Stem snaped. I covered it in tape and it didnt dry out. The i removed it Like 2-3 days later because i wanted to cut the branch off, to let the plant spend her Energy in the healthy ones. But the i saw how strong it got and decided to even LST the broken stem even more because it strenghtened the left over parts. Now it recovered really good and got a defoliation. Maybe i will Cover up the Open Crack🤷‍♂️
Likes
4
Share
Vamos familia, actualizamos la cuarta semana de floración de estas Thunder Banana de Seedstockers, salieron las 3 de 3, 100% ratio éxito. Aplicamos varios productos de Agrobeta, que son increíbles para aportar una buena alimentación a las plantas. Temperatura y humedad dentro de los rangos correctos dentro de la etapa de floración. La tierra utilizada es al mix top crop, por cambiar. De 3 ejemplares seleccioné los 2 mejores para completar el indoor, cambié el fotoperiodo a 12/12 y también apliqué una poda de bajos, se ven bien sanas las plantas, tienen un buen color progresan a muy buen ritmo por el momento, las flores están tricomando que da miedo. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨.
Processing
Likes
31
Share
Nov 20, 2019 The plants are doing well. Gave them and the soil in the entire 5 gallon pots a good drenching with a compost tea, kelp, alfalfa, fish hydrysolate, and molasses blend. I'm also realizing I could be watering these girls a bit more. Being a newby I'm over cautious of over watering. But I'm finding the light airy soil mix I made combined with fabric pots.... the soil dries rather quickly. No signs of under watering, but I think I can water them more. This week I'll start watering a couple of cups daily and once a week give the whole pot a good drenching to keep the rest of the soil (where the plants haven't grown into yet) damp.✌️ Nov. 22, 2019 Well I think the girls are starting to give off a little scent. Opened the doors to the room and noticed a slight aroma of woodsy dank. Put my nose right up to the plant.... and yup, they starting to smell. Nov. 23, 2019 Noticed the front row was growing faster and taller than back row. At the start of this week I swapped the rows, moved 2 Zkittlez and 1 Californian Snow to the back row, 2 Californian Snow and 1 Zkittlez to the front row. Today I started LST'ing the taller plants, 2 Californian Snow and 1 Zkittkez. I hope the other 3 catch up soon. I want to keep these all close together. Nov. 24, 2019 I've decided to keep separate diaries here at growdiaries for each of these two strains. Reason is I can focus on journaling the growing characteristics, experiences both good and bad regarding each strain independently. Also after spending time here at growdiaries, I've realized this will make it easier for fellow growers growing or researching the same strains I am to sort through diaries regarding these specific strains when looking for information. I will still update this diary regularly but it will be general updates of the overall grow, environment changes, watering/ feeding schedule, and anything else this grow experiences good and bad without getting into great detail regarding each individual plant. I have provided the links to the strain specific diaries below. Please look them up and follow along. Since this is my first growing evidence ever you never know what kinda crazy shit you'll see.✌️ https://growdiaries.com/diaries/44659-fastbuds-zkittlez-auto-grow-journal-by-weedwacker https://growdiaries.com/diaries/44676-fastbuds-californian-snow-grow-journal-by-weedwacker Nov. 25, 2019 Sitting here waiting for my windows 10 top update...I thought it'd update this diary. Started to LST the 3 tallest plants... earlier I posted the front row was growing faster than the back row. That was Saturday Nov. 23. I LST'd the other 3 the next day. I'll have more details in the individual diaries... links posted above. Started watering today 6 cups/ pot. This seems about right as I'm getting very little run off and the bottoms of all the fabric pots are wet. I found this Hydrofarm soil moisture/ph meter in a box that was with all this equipment I acquired. The electrodes were corroded, after a little sandpaper on them I think it's working pretty well. That's it for this week. ✌️👌
Likes
19
Share
@BLAZED
Follow
Week 15 Harvest 21-2 Temperature: 29.7 degrees (lights on) 19.9 degrees (lights off) Humidity: 67% (highest) 44% (lowest) Watering: None. 22-2 Temperature: 29.9 degrees (lights on) 19.9 degrees (lights off) Humidity: 65% (highest) 41% (lowest) Watering: None. Today is the last day, tomorrow i will harvest her. I removed all large fanleaves and took some pre-harvest pictures. 23-2 Today is harvest day! I left the buds on the branches and hang them to dry. Temperature: 18.1°c to 19.9°c Humidity: 57% to 72% 24-2 Temperature: 17°c to 18.8°c Humidity: 56% to 64% 25-2 Temperature: 16.8°c to 17.9°c Humidity: 57% to 69% 26-2 Temperature: 16.2°c to 18.1°c Humidity: 56% to 61% 27-2 Temperature: 16.2°c to 17.5°c Humidity: 55% to 61% 28-2 Temperature: 16.3°c to 17.6°c Humidity: 57% to 64% 29-2 No info. 1-3 Temperature: 17.8°c to 18.7°c Humidity: 56% to 61% 2-3 No info. 3-3 Temperature: 16.5°c to 20.3°c Humidity: 46% to 62% After 8/9 days of drying the buds are dry enough, so lets start trimming! The buds are pretty airy and foxtaily, but very resinous, she smells good, but i think the buds are a bit overdried. End results: Trim: 18.12 Gram. Popcorn buds: 37,11 Gram. Normal Buds: 70,98 Gram. Total buds: 108,09 Grams. I will post the progress of me making bubble hash in this diary very soon, so if you are interested make sure to keep an eye out!
Likes
2
Share
End of the first official week of rooting for these WalkerBerry OG cuts. We’re down to 6 plants and 2 specimens of each. It’s been 4 days since initial cutting and they’re already showing small signs of rooting. I’ve had nothing but success with this little home made aerocloner for years and it’s just so much easier and less hassle than all the humidity domes and mats etc. nothing against it - I’m just lazy and all that stuff is a pain in the ass. As of now - all the leaves on the cuts have started to ball up in confusion as they shift focus to more root creation. They want to flower but know they can’t so I expect to see re-vegetation in another few days. After that we’ll probably have to look at some sort of impromptu dwc system as this container likely can’t take even half of em through full term through pollination. We’ll look to re-initiate flower as soon as they’ve got some decent developed root growth. Alls good here👍. ***update - all clones showing good root growth in only 7 days. Upping to a full Rez in a couple days.
Likes
1
Share
Plants were watered on day 4 of week 9, as follows: Lucy: 1 gallon water, pH: 6.27, Height: 22 in. Herbert: 1.25 gallons water, pH: 5.77, Height: 24.5 in. ***Both fed nutrients - 5 ml/.5 gal BioVega (3% N, 1% Phosphate, 5% Soluble Potash), 7 ml/.5 gal BioBoost (1% Phosphate), and 1 ml/.5 gal BioRhizotonic (0.6% Soluble Potash) Plants were watered on day 5 of week 9, as follows: Thin Mint Sr: 1 gallon water, pH: 6.76, Height: 20 in. Thin Mint Jr: 1 gallon water, pH: 6.50, Height: 19.5 in Notes: Thin Mint Jr has nutrient burn and so was NOT fed nutrients today. Thin Mint Sr was fed nutrients at 50% strength 2.5 ml/.5 gal BioVega (3% N, 1% Phosphate, 5% Soluble Potash), 4 ml/.5 gal BioBoost (1% Phosphate), and 0.5 ml/.5 gal BioRhizotonic (0.6% Soluble Potash) (both plants still in nutrient distress - in process of recovery but have some new growth that is greener so improvement is being observed; slowly but surely!) ***Plants ideally would have been transitioned to the flowering phase this week, but due to nutrient deficiencies and nutrient burn on Thin Mint Jr., we are holding off on this transition for 1 week to give the plants a chance to recover from stress.
Likes
14
Share
this is almost the end of week 6. Hoping to see some bulking soon. Lower sites are still producing pistils and the top site pistils are starting to curl over.
Likes
16
Share
Hang dried for 3 weeks in tent. Goal was to be more patient with the dry & start cure hanging on branch in a tent, my dry tent ranges from 58-61RH & 64-69F
Likes
Comments
Share
She is ready to go like F1 RS11 going well after trasnplantation and topping RS11 Se esta empesando poner en la marcha
Likes
2
Share
@0JuJu0
Follow
Its finally harvest day, i would give her 1 more week but the leaves are to dead and I'm afraid of the problems that can follow from this, like mold.
Likes
17
Share
Well.. nice start of a new week. Still stretching so today changing water for fresh water. Going to level up the EC from tapwater 0.3 tot 0.7 with CalMag before adding nutrients. Then raising the EC to 2.2 I hope (depending on the PH not dropping below 5.8). Hopefully they will consume less water and therefore stop stretching.. We will just see what happens. Easy to lower EC afterwards and also easy to raise PH. I just have to add some tapwater. 13/7 some shortages and maybe too much light. Reducing time with half an hour daily. Raised EC to 2.3