Likes
Comments
Share
@MrGanjah
Follow
This week I transplanted them into moist, inoculated soil that I had matured for 40 days, so I didn't water them this week. The soil hasn't dried out yet. I put mycorrhizae in the transplant hole. Next week my oil heater will arrive to raise the temperature a bit in the dark, because there were days when it reached 14°C. I noticed some leaves looked wrinkled; I believe it's because the soil is cold and I'm feeding them 300 ppfd. But otherwise, it's growing, just slower.
Likes
14
Share
@Hg91uk
Follow
Thinking of pulling this whole run at this point, the stems are in a bad way and general structure has really suffered. FIM'd both girls this week & gave compost tea(ecothrive biosys) to aid recovery. Will make a decision on growing them out depending on how they respond. (Update end of week.) So in the first week these girls stretched terribly, instead of riding it out and letting them adjust I tried a trick I've applied with tomatoes in the garden and coiled an inch of the excess under the surface and covered it. After a burst of invigorating from the microbe tea(biosys) these girls seem to be recovering from the stress fairly well. The only down side, the stems have broken the surface and left me with these crazy bonsai style stems & the girls are very short and bushy, concerned the stems won't hold any weight later in life.. Will give this another week and make my decision TLDR; Don't interfere with nature when you can help it, especially with autoflowers. Update day 28 from sprout. Bbk1 showing signs of nitrogen toxicity after perking up, I had to use the bottle measure last week instead of a syringe. Much less accurate so assume this is the cause, just ph water for a while. Bbk2 perking up slightly. I did think these girls looked a funny shape and now I can see the stem properly its starting to make sense 🤦‍♂️🤣🤣
Processing
Likes
31
Share
Hey everyone ☺️. This week the food was increased to 4 ml per liter of water, as they can still tolerate a little more. I'm curious how it will develop this week. Otherwise there is not really anything to tell this week ☺️. Stay healthy 🙏🏻 and let it grow 🌱 You can buy this Strain at https://www.barneysfarm.com/blue-cheese-34 You can buy the fertilizer at https://www.greenbuzzliquids.com/ Type: Blue Cheese ☝️🏼 Genetics: Blueberry X Original Cheese 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green Buzz Liquids : Organic Grow Liquid Organic Bloom Liquid Organic more PK More Roots Fast Buds Humic Acid Plus Growzyme Big Fruits Clean Fruits Cal / Mag Organic Ph - Pulver ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 - 0.4 EC. Add Cal / Mag 2 ml per l water every 2 waterings . Ph with Organic Ph - Pulver to 5.8 .
Likes
69
Share
@nonick123
Follow
Día 73 (12/08) Riego 500 ml H2O pH 6,55 Todas las plantas muestras las preflores hembras! (excepto LemonPaya) Día 74 (13/08) Riego 250 ml H2O pH 6,55 . Están muy bien hidratadas Pequeños ajustes de LST Día 75 (14/08) Hoy día de lluvias torrenciales Riego 250 ml H2O pH 6,55 Día 76 (15/08) Detecto mosca blanca en varias plantas. Aplico Spruzit a 10 ml/l ahora que aún no estamos en floración Riego 500 ml H2O pH 6,55 Día 77 (16/08) Riego 500 ml H2O pH 6,55 La mosca blanca ha desaparecido completamente Día 78 (17/08) No riego. Mañana a primera hora aplico Top Dress y riego profundo Va a empezar la floración! Día 79 (18/08) Alimentemos el suelo con Top Dress! 💥 Aplicamos 4 g/L sustrato de Tasty Flowers TD by Lurpe Solutions. Total = 84 gramos / maceta Riego con 1 Litro H2O pH 6,5 con 25 ml/L de Humus de Lombriz Liquido Aplicación foliar Kelp hidrolizado de Lurpe Solutions a 0,25 ml/l 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
2
Share
Likes
8
Share
Should be harvesting next week. Glad to finally be close
Likes
6
Share
@Krissci
Follow
Day 1 ....add additional soil, water and 1st topping Day 3 - checked for 2nd topping Day 5- watering....strong stems already
Likes
3
Share
Hello everyone, The 3 gorilla x white widow is growing fast and every 2 days the pots are dry so i need to water every day from now on. I just finished giving them a good defoliation and removed the internodes. I think the plants need to be transplanted to bigger pots and will try to do that next week. Let's see how they look next week, thanks for stopping by and have a nice week. Best regards, Growfather
Likes
19
Share
Likes
3
Share
In Woche 3 zeigt die GMO Rootbeer richtig, was in ihr steckt. Der umgelegte Head aus der letzten Woche hat perfekt auf das LST reagiert: Die unteren Triebe sind deutlich nach oben gekommen und beginnen aktiv um die Spitzenposition zu konkurrieren. Genau so soll es aussehen, wenn man früh mit dem Biegen startet. Die Pflanze bleibt insgesamt kompakt, aber das Wachstum hat klar an Tempo zugelegt. Mehr Blattmasse, breitere Fächerblätter und deutlich sichtbare Knotenabstände — alles ein Zeichen dafür, dass sie die Trainingsmaßnahmen gut wegsteckt. Auch der Hauptstamm wird zunehmend stabiler, was das weitere Formen einfacher macht. Mit leichten, täglichen Korrekturen im LST wurde der Head in der Position gehalten, während die Seiteäste weiter nachgezogen haben. Keine Stressanzeichen, kein Hänger — GMO Rootbeer scheint das sehr gut zu vertragen. Die Bewässerung blieb moderat, immer im Wechsel zwischen leicht antrocknen lassen und wieder frisch gießen. Der Wurzelballen scheint sich gut entwickelt zu haben, die Pflanze steht fest und zeigt keinerlei Mangelerscheinungen. Alles in allem eine sehr produktive Woche, in der die Struktur für einen breiten, gut belichteten Wuchs gelegt wurde. Wenn sie so weitermacht, wird sie in Woche 4 eine richtig schöne, gleichmäßig geformte Veg-Pflanze.
Likes
16
Share
5/28 I think she's about to go off. 6/2 she's been droopy leafed for a bit. I backed off on nutrients for over a week. I thought it may have been overwatering but at the same time I don't want to kill off the microbe life in my soil right now by letting it get overly dry. I'm more experienced with coco and the dry back is more aggressive and intense and with soil it's a little different and slower but it als9 cant dry back as
Likes
20
Share
Scary mutations - yes, but I was once again allowed to learn and suffer so much... ;-)) But patience and love pay off. I can tell you that much. 😁 At the end of the third week, I decided to prune the two bulkier phenotypes. Finally, I wanted to make sure that the plant canopy of all 4 would end up as homogeneous as possible in the flowering.
Likes
17
Share
Very good week, used tie down method day 19 and they bounced back well within a day, started there veg feed today day 21 by adding fish mix, roll on next week.
Likes
14
Share
Week 3: Mid-Flowering Stage Welcome to the seventh weekly update of our cannabis cultivation journey in Germany! As we progress into the third week of flowering, our strains—Pulp Friction, Cookies Haze, Eleven Roses, Poddy Mouth, Critical Lemon Kush, and OG Kush—are flourishing with vibrant buds and continued growth. Key Developments: 1. Bud Development: - The buds have significantly increased in size and density, filling out along the branches. - Trichome production is becoming more pronounced, indicating the onset of resin production. 2. Environmental Management: - Maintained stable environmental conditions with temperatures ranging between 20-26 degrees Celsius and humidity levels around 40-50%. - Ensured adequate ventilation to prevent humidity buildup and maintain airflow around the plants. 3. Nutrient and Watering Regimen: - Continued to provide a balanced nutrient solution through the AutoPot system, adjusting as needed based on the plants’ flowering stage. - Monitored soil moisture levels closely to prevent overwatering or underwatering, ensuring the roots receive optimal hydration. 4. Support and Maintenance: - Supported the plants’ structure with additional ties and stakes to prevent bending or breaking under the weight of developing buds. - Continued to prune away any yellowing or dead leaves to maintain plant health and focus energy on bud production. Growing Medium and Setup: - The plants thrive in a blend of living soil, coco coir, perlite, and clay pebbles, enriched with mycorrhizal fungi cultures for enhanced nutrient uptake. Next Steps: - Monitor the development of buds and trichomes daily to determine optimal harvest time. - Adjust feeding and watering schedules based on plant responses and environmental conditions. - Prepare for the final stages of flowering, focusing on maximizing bud growth and resin production. Stay tuned for next week’s update, where we’ll discuss the late flowering stage and preparations for harvest. Feel free to ask any questions or share your experiences in the comments below!
Likes
47
Share
Monday, March1st. The Plants develop very Good. Buds aer swelling, I took some clay onto the surface, and its now easier for me to keep them happy I learned so much, that its now an easy Task to grow like this.... Its one of the best Plant in the World, and so much fun to Grow her #legalize #stopp Prohibition