Power Flower is now only an inch shorter than the Holy Punch 600W light is 9 inches away from plant (over the holy punch (Trying to give the two Power Flowers more room to grow))

AAAnd there you have it. A nice experience, my second time making seeds! I harvested the first day of week 15. A lot to say about this experiment. It came out awesome, lots of seeds (more than 100!) Wich I also tested and came out with the exact same phenotype. I added some more pictures of the outcome and of the seeds, cause I don't have much more data about the harvest! Sorry for the last time haha! Also! Leave a comment if you want to see more old diaries, I might have 4 or so documented like this, Including the first test of the seeds Wich you see some pics here 🤞.

Starting to really fill out smell is 6/10 so far very sweet some pine as well

Hi everyone. Welcome to my🍌💜👊 week update. Hope everyone keeping well and having a great week. Daily updates and uploads so if week not over yet. Please revisit to see full week content😊 Thank you all for such amazing support 😊🤗💜 So far everything is going great. No issues at all. Both girls started preflower on Tuesday and already I can see that they started stretching nicely. Scrog net will be installed by the end of this week. Week 5 13-19 Nov. 13/11 day 36 First runoff experience for girls. Loaded both pots with approx. 2.5 ltr each in 4 stages of 500-700ml. Runoff 100-150ml from each. Runoff PH 5.9. Nutrients for this watering were same as on previous week and added only calmag. Next watering possibly Friday but with new measurements. 14/11 day 37 Both 🍌💜👊 girls started preflower on same day. Xena is catching up quick to her larger sister and possibly soon they will be sharing this growing space 50/50 15-16/11 days 38-39 Just happy and healthy days 😁 nice steady growth. 17/11 day 40 Second watering for this week. 5.5l beetwen both. Runoff Ph 6.1 19/11 day 42 Most busiest day so far. Both girls got very bushy in last few days and they stretched enough to install scrog net. Before installing net applied selective defoliation on both girls. 8-10 fan leaves from each. It's the end of this amazing week 😁 Thank you all again for such a great support 🤗✌️💚

Smooth growth

The plants are doing really well ✌️ Last week it looked like the buds growth was slowing down, but this week the buds are growing in size by the day. The strain description says the plant should be ready in 9 weeks, but as things look now it could also be 10 weeks. I don't mind though as she already looks amazing and getting better every day! The plant in the back that didn't have the purple shades is now also turning purple-ish. The resin production on both plants is more than I ever seen in previous grows. The buds and sugarleafs are sparkling every time I open the growbox, and the smell is really intense. My carbon filter is having a hard time keeping the aroma inside the GTools these last few weeks 😅 Will the Fruity Donutz will be ready by the end of the week? Stay tuned for more pictures and updates 😊😉 A final update before the plants are harvested ✌️ It's officially week 10 now, but I plan to harvest the Fruity Donutz in a day or 2. The trichomes are mostly milky but no amber ones just yet. It would be a shame to harvest these beauties before they reach their max potential. They look absolutely stunning, and I can't wait to try them. I plan to chop them down and hang them without doing any trimming, just remove the biggest leafs. They take longer to dry, but it does improve the overall taste and quality in my experience.

Estamos en las ultimas. Se ve que ya no quedan mas de unos 10 días (a la purple quizás un poco mas) pero dentro de todo ya esta finalizando el resultado. No es el mejor de todos, mucha asimetría, mucho problema y mucha irregularidad en el cultivo que dentro de todo hacia complicado saber de dónde pudo haberse generado el problema, pero aun asi algo de producción obtuvimos. Más allá de revisar la productividad de este cultivo, veremos qué tal la calidad de este.

Apricot Auto FastBuds W10 F7 12/7-13 12/8,13 Ph 6.5 PPM 190 65,9f water only. I am flushing Apricot 1& 2 with Ph 6.5 water. They are ready. I removed the remaining fan leaves. I took pics and videos and trichome shots. #1 is the short gal with very dark purple leaves and still pushing more calyxes and fattening her buds. Her trichomes show many amber and milky. These really ripened fast compared to last week trichome pics. I hope I didn’t miss the opportune time. #2 has mauvy pink buds with green leaves. The trichomes don’t show as many amber tops as #1 but I will water/flush once more then harvest them at the same time. Stay green, growers love 💚🌿 💫Natrona💫

During a beautiful spring evening somewhere in May, the idea came to me to choose for a new hobby. And because I enjoy gardening very much and also like to smoke a joint, I decided that night to try to grow my own weed. And I also wanted to challenge myself to grow the best weed I possibly can. That's when I started to read up on all the facets of growing cannabis. From materials to technique, from strains to the anatomy of the plant, I prepared myself for at least 2 months before even one seed went into the soil. And partly because of this thorough preparation, I can now say to myself afterwards that this is the maximum I managed to get out of it. And the great thing about all this is that after these past 4 months I have learned so much more! Therefore I already know for sure that my next grow will be even better. Below some tips for my fellow newbies, they might help you during your own grow... Material In addition to the lamp, the tent and the right nutrients, which I commented on above, I have benefited a lot from a humidifier and dehumidifier over the past 4 months. Especially in the first weeks of growth, a humidifier is very useful so that you can keep the humidity around 60% (or what the VPD chart tells you depending on the temperature). During the flowering phase it is very useful to use a dehumidifier so that the humidity remains below 50% and at the end of the growth even close to 40%. That way you also exclude the risk of mold and bud rot. It is also useful to use these devices during the drying process so that you can keep the humidity around 60% and dry your weed slowly (at a temperature of around 15.5 Celsius, drying takes about 14 days). Drying slowly and coolly definitely benefits the smell and taste! What's also really a must are an EC and pH meter, without these 2 instruments it is actually not possible to realize a perfect grow. Make sure you use a reputable brand like Apera, they are a bit more expensive but always deliver spot on. In total I invested about 1500 euros in material on my first grow. This is also because I wanted to do it perfectly and therefore only went for quality products. But all in all I think I earn back my investment within 2 runs, taking into account that both my friends and I will never run out of a joint 😊 Seeds Good genes are important to ultimately achieve a good end result. Therefore, do not save on the seeds and buy them from a reputable breeder. That way you can be sure that you will grow strong and healthy plants that can withstand pests and other negative influences. Well begun is half done and this is especially true when growing cannabis. Technique Of all the training techniques I have used, I would like to specifically mention one that surprised me the most: Supercropping! Because I did this grow using the ScrOG method, I wanted to create as even a canopy as possible. The type of lamp I use is also most suitable for this method. But no matter how well you train your plants, they will eventually stretch unevenly during the first weeks of flower. I therefore snapped about 8 stems using Supercropping, which made my canopy nice and even again in a way that each branch gets the same amount of light. And the colas on those branches turned out SUPER nice! Also the nuggets beneath were growing bigger because they too got more light. I will certainly use this technique even more in my next grow! Will I will definitely use a diary again I will definitely use VPD charts again I will definitely use a feeding schedule again I will definitely turn my light on during the day and off during nighttime again I will definitely use the ScrOG method again I will definitely choose a feminized American strain again I will definitely use a webcam again (Wyze Cam) I will definitely defoliate even more during the 4th week of flowering I will definitely go higher on lollypopping I will definitely Supercrop more I will definitely dry my plants slowly and cool again (15 days at 60% RH and 15,5 C) I will definitely continue to learn more and prepare myself even better for my next grow again 👊 Won't I will certainly not water my seedlings too much again 😅 I will certainly not go for 3 plants again, but instead for 4 plants per m2 I will certainly not hesitate to ask experienced growmies for help again 🙏 (next week I'll comment on the bud dry weight and give my final smoke experience)

They are loving the Spifer Farmer G5000

British Delight - Wizard Trees Day 55 - Watered with 2L of RO tap water with nutrients mixed individually and in order, then finally pH'd to 6.3. She has stretched really well, but is quite bushy, so she'll require a good bit of defoliation at her canopy soon. I've lollipopped her to remove all her lower most nodes and leaves, allowing her to focus on developing her canopy 👍🏻

You don't become confident by shouting affirmations in the mirror, but by having a stack of undeniable proof that you are who you say you are, outwork your self-doubt. Nitrogen fixation is a chemical process by which molecular nitrogen (N2), which has a strong triple covalent bond, is converted into ammonia (NH3) or related nitrogenous compounds, typically in soil or aquatic systems but also in industry. The nitrogen in air is molecular dinitrogen, a relatively nonreactive molecule that is metabolically useless to all but a few microorganisms. Biological nitrogen fixation or diazotrophy is an important microbe-mediated process that converts dinitrogen (N2) gas to ammonia (NH3) using the nitrogenase protein complex (Nif).[2][3] Nitrogen fixation is essential to life because fixed inorganic nitrogen compounds are required for the biosynthesis of all nitrogen-containing organic compounds, such as amino acids and proteins, nucleoside triphosphates and nucleic acids. As part of the nitrogen cycle, it is essential for agriculture and the manufacture of fertilizer. It is also, indirectly, relevant to the manufacture of all nitrogen chemical compounds, which include some explosives, pharmaceuticals, and dyes. Nitrogen fixation is carried out naturally in soil by microorganisms termed diazotrophs that include bacteria, such as Azotobacter, and archaea. Some nitrogen-fixing bacteria have symbiotic relationships with plant groups, especially legumes.[4] Looser non-symbiotic relationships between diazotrophs and plants are often referred to as associative, as seen in nitrogen fixation on rice roots. Nitrogen fixation occurs between some termites and fungi.[5] It occurs naturally in the air by means of NOx production by lightning.[6][7] All biological reactions involving the process of nitrogen fixation are catalyzed by enzymes called nitrogenases.[8] These enzymes contain iron, often with a second metal, usually molybdenum but sometimes vanadium. Green clover (Fixation) White clover (Fixation) Red Clover. (Fixation) Yellow Clover. (Fixation, deeper roots) Sweet Thai Basil. (Terpenes) Italian Basil. (Terpenes) Chamomile.(Oil production) Borage.(Pest attraction taste) Lavender.(Pest attraction smell) Marigold(Pest attraction visual) Mycorrhizae are beneficial associations between mycorrhizal fungi and a plant’s root system. Mycorrhizal fungi spores germinate in the soil, creating filaments (hyphae) that penetrate the root cells, thus establishing a symbiotic relationship. This collaboration leads to the development of both intra-radical and extra-radical networks of filaments, enabling efficient exploration of the soil for enhanced access to nutrients and water. Consequently, these vital resources are transferred to the plant, resulting in numerous benefits for crop cultivation. Various mycorrhizal products are available in diverse formulations (powder, granular, and liquid), concentrations, and qualities. Ongoing advancements in products, technologies, and research are reshaping our understanding of mycorrhizae. Despite these positive developments, certain misconceptions persist. In the following discussion, we aim to clarify the truths and dispel the myths surrounding mycorrhizae products. MYTH #1 A HIGHER NUMBER OF MYCORRHIZAE SPECIES MEANS BETTER RESULTS. Contrary to common belief, having a higher number of mycorrhizae species in a product does not translate to better results; in fact, it often yields the opposite outcome. A plant can sustain only one association with a particular mycorrhizal fungi species. Introducing multiple species creates competition among them, which is not advantageous for the plant. The initial colonizer does not ensure the highest success; instead, it gains precedence. It is recommended to select a product with a concentrated presence of a single mycorrhizae species known for its effective performance, rather than opting for a product with multiple species at lower concentrations. MYTH #2 ECTOMYCORRHIZAE ARE EFFECTIVE FOR CANNABIS PLANTS. Although ectomycorrhizae can colonize five to ten percent of plant species, cannabis is not among them. Ectomycorrhizae do not penetrate the root cells; instead, they develop around the roots and on the exterior. For cannabis plants, it is essential to seek out endomycorrhizae. Endomycorrhizae are capable of colonizing 70% to 90% of plant species, including cannabis. Unlike ectomycorrhizae, endomycorrhizae penetrate the root cells, forming structures like arbuscules for the exchange of nutrients and water with the plant. MYTH #3 WHOLE INOCULANT (PROPAGULES) PERFORM BETTER THAN ONLY VIABLE SPORES. The propagule count specified on most mycorrhizae products indicates the presence of spores (viable and unviable), hyphae, and root fragments. However, it is crucial to note that only viable spores, those with the capacity to germinate, can successfully colonize a plant’s root system. Spores are to mycorrhizal fungi what seeds are to cannabis plants—a fundamental component enabling fungi reproduction. Consequently, even if a mycorrhizal product boasts millions of propagules, its effectiveness hinges on the presence of viable spores. Without viable spores, the product will not contribute to plant development. Therefore, the genuine value of a mycorrhizal inoculant lies in the quantity of viable spores it contains, as only viable spores can efficiently initiate symbiosis. MYTH #4 ALL METHODS OF APPLICATION YIELD IDENTICAL RESULTS. To establish the symbiosis, mycorrhizal fungi spores must be close to the plant roots. The optimal recommendation is to directly apply mycorrhizal inoculant to the roots, either in powder, granular or slurry form. This method ensures maximum proximity between the spores and the roots, facilitating a rapid establishment of symbiosis. Particularly with crops like cannabis, which have a short growing cycle, employing this technique is the most effective way to obtain optimal benefits. Alternatively, techniques such as blending the inoculant with the soil are effective, but there may be a delay in the establishment of symbiosis. This is because the roots need to grow and come into contact with the dispersed spores throughout the growing media. MYTH #5 MYCORRHIZAE CAN ONLY BE GROWN ON LIVING PLANTS. While the predominant method for commercially producing mycorrhizae involves growing them on the root systems of living plants (in vivo production), it is not the exclusive nor the optimal technique. In fact, this production approach has notable drawbacks that the “root organ culture” method just does not have (in vitro production). In vitro production occurs in meticulously controlled, aseptic laboratory conditions, allowing for the consistent generation of products that are viable, highly concentrated, species-specific, and free from pathogens. Achieving such precision and quality is impossible when relying on the cultivation of mycorrhizal fungi on plants exposed to external conditions. In conclusion, it is crucial to take all these factors into consideration when choosing the appropriate product for your crop to fully harness the wide array of benefits provided by a high-quality mycorrhizal product. STRONGER PLANT – Stress resistance. FASTER GROWTH – Improve plant structure and shorter veg time. INCREASE YIELD – Overall more biomass. IMPROVED QUALITY – Increase cannabinoids and terpenes content.

Starting week 3 not looking too bad

Hey guys :) The girls got topped once now, they still recovering from the light burn i did, Trying to ‚LST‘ 😄 Started giving nutes in a Half dosage at week 3 !

Comming soon

Welcome to Flower Week 8 of Divine Seeds Auto White Widow I'm excited to share my grow journey with you all as part of the Divine Seeds Autoflowering Competition 2025. It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this competition, I’ve chosen the Feminized Automatic strain: Auto White Widow Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Divine Seeds • 💧 Humidity Range: 50 • ⏳ Flowering Time: 58 Days • Strain Info: 20%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 3 • Nutrient Brand: Narcos • ⚡ Lights : 200W x 2 A huge thank you to Divine Seeds for allowing me to be a part of this amazing competition and Sponsoring the Strains. Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!