Likes
Comments
Share
05/24 - (M) - The mother has been harvested and dried - She produced roughly 3 oz's after drying - Considering I pulled a good amount of clones from her early 3 oz's is acceptable on this harvest - Completely negated the hay smell through drying - Nuggz are full and dense - smoke is clean and smooth. 05/24 - (C) - The clones are coming along nicely - They have about 5 maybe 6 weeks left until harvest - They were moved into the 2x2 tent to finish (Needed the bigger tent for my follow up grow) - The clones have a deep citrus smell - The budsites are filling out accordingly- Thus far no issues through first couple weeks of flower - I included 2 nutrients to their feeds Green Planet Horti Bloom and Late Bloom. Follow my IG for more content IG@Greenphoenix6262😎😎😎😎😎😎😎😎😎 05/27 - (M) - This will be the last entry for the mother - She has been trimmed down and placed in cure jars with humidity packs for curing - The first cut from this batch (MOM) is nearly perfect - No hay smell - clean smoke - white ash - looking to step it up with the clones. 05/27 - (C) - The clones are flowering perfectly - Temps are at 69-71 - Humidity at 65% - They have been switched back to manual feeding to finish out - I say they have about 3 maybe 4 weeks left and this run should be completed - Stay tunned. 😎😎😎😎😎😎😎😎😎😎😎😎😎 05/29 - (C) - Ending the week on a good note - We are in week 5 (day 25) of flower for the clones - Thus far everything is running accordingly - I will increase their nute feeds to 3 times a day in preparation for harvest in about 3 maybe 4 more weeks.
Likes
6
Share
@Averynate
Follow
Marijuana cultivation, like any agricultural endeavor, involves various techniques to optimize growth, yield, and potency of the plant. This is the week to make it happen! One such advanced technique is High-Stress Training (HST). HST is employed to control the growth pattern of the marijuana plant, making it more bushy rather than tall. This is beneficial for indoor growers with limited vertical space. Moreover, HST exposes more of the plant's foliage to light, which can lead to enhanced photosynthesis. This results in a plant that can produce more buds, which are denser and more potent. Given that light is a primary energy source for plants, maximizing light exposure can drastically improve the overall quality and quantity of the harvest. Topping is a specific form of HST that involves cutting off the main stem's topmost growth. This method forces the plant to divert its energy and nutrients to the lower branches, promoting the development of multiple main colas instead of a single dominant one. By encouraging a more even canopy, topping ensures that light is distributed more uniformly across the plant. This reduces the chances of having underdeveloped buds at the lower sections of the plant due to light deprivation. Topping also curtails the plant's height, making it more manageable, especially for indoor growers with limited space. HST and topping are integral for modern marijuana growers seeking to enhance their yields. These techniques address the spatial constraints faced by many growers and ensure that the marijuana plant receives optimal light exposure. The end goal of these methodologies is to increase yield and potency, and when done correctly, they can transform a mediocre harvest into a bountiful one. Cultivators who invest time in understanding and implementing these techniques stand to benefit significantly from their marijuana crops.
Likes
11
Share
*01/24 - Week 3 Veg - Snapped a cola when adding bend clips, All clips have been removed - Uptake in nutrient feeds - Lite LST training - Lights running 18/6 - She shot up quickly in a week and 2 days - grew 6.5 inches ( 10 Inches total ) *01/27 - Mid Week 3 Veg - Uptake in nutrient feeds - Normal LST training - Lights running 18/6 - Retied up her main cola - increase in CAL-Mag feed.
Likes
27
Share
Week 3, check Had to battle fungusgnats again:( thought i had em all. So did a h202 3% 33/66 mix with water and flushed again-_- I also added a 1000 predatory Mites in the ballpark and nematodes. I also picked 2 new toys up microscope videorecorder 50/500x and a IR temp reader. Chasing the perfect VPD Rock on Growmies
Processing
Likes
55
Share
@Max1973
Follow
Day 29 - Things going along nicely .... i trimmed down some of the bigger bottom leaves, i didn't have enough soil to fill the pots, and the plants are short, bushy, weird little things, that filled out the inside of the pots..... they are only 15cm tall, but the leaves are 10+ cm .... really weird little plants.... haha.... i decided to trim the fk out of one of the ones in the double pot, and practiced topping on her.... i'll cut her down maybe trimmer her of the pot, and focus on just the 2........ they seem to be still growing upwards, so i'm not in a hurry to put em into flower mode......... on the main one i noticed some neut deficiencies ... so i upped the neuts.... should be ok, i put a good heavy neut and it stopped the spots etc..... i think some bug or something got in the double pot and is livin in there, but he doesn't eat much, haha....... the main stalks are as big as my thumb and under each canopy is all the branches..... it's really strange, to go in under all the growth and see it all .... they look kinda small, but the entire under canopy of leaves is all full .... i'm moving the huge sized leaves out and pulling each branch up over them as they grow..... this is 21 THC and 19 CBD, so it's all the good stuff for medicine ... the smell is getting abit noticable and i'm hoping the exhaust fan arrives from china soon.... just got positive ventilation into a carbon fil. ... and daily air out........ i think i had the led lights too low..... so i'll raise em abit more and see if i can get em to stretch .... Day 30 -- added some video's...... daylight vids... worth watchin for a laugh ...... first grow, so idk what i'm doin, ... any help/comments appreciated Day 32 -- added some pics of the late night trim and LST,... idk looks ok.... Day 34 -- added a video...
Likes
24
Share
This girl is done. Getting the chop tonite. Been so much damn fun. Bathroom photo shoot turned out great. Very happy with this girl. Gonna be sad to chop her down.
Likes
8
Share
Woche 7 Die Mimosa Fast von 00 Seeds Bank kommt langsam in die letzte Phase wo die Blüten einiges an Gewicht zulegen sollten. Soweit geht es den Mimosa auch weiter gut. Die Blüten bilden sich weiter aus, werden dicker und verharzter. Erstaunlicher weise haben die Pflanzen vom geringen abstand der LED Lampe (EVO6-150) immer noch keine negativen Auswirkung oder Schäden. Am Dünger habe ich in dieser Woche nix verändert. Ich denke nächste Woche werde ich den Dünger noch mal für ca. 2 Wochen anpassen.
Likes
29
Share
Hi guys sorry for a late post this week. So started flushing all the plants now and they all.smell.amazing and getting some nice colours coming thru. Really frosty buds on these autos and really impressed so far.
Likes
36
Share
@nonick123
Follow
Día 59 (29/07) Este cultivo no es muy entretenido con solo agua, asi que... Le hago supercropping a todas! 😁 A ver como reaccionan! Riego 500 ml H2O pH 6,5 SÓLO a OnionOG #1 Día 60 (30/07) Las plantas se están recuperando muy bien del supercropping! 😁 Todos las puntas hacia arriba! 💥 Come onnnnnnn! A por esa floración en 2-3 semanas! Riego 500 ml H2O pH 6,75 Día 61 (31/07) Las plantas se han recuperado genial del supercropping y están lanzando TODAS las ramas hacia arriba 😍 Un espectaculo la fuerza de estas plantas! 💥 Redistribuyo las plantas, para ver si OnionOG está más protegida del sol, ya que consume muchisima agua y voy a estar en unos días fuera... También reubico ligeramente la malla de sombreado, debido a que en mi latitud el sol empieza a incidir lateralmente por las tardes... Riego 500 ml H2O pH 6,55 OnionOG: Riego 1 Litro H2O pH 6,5 Día 62 (01/08) OnionOG me impresiona con su vigor. Sus ramas se están estirando de forma impresionante! OnionOG le hago una poda de partes bajas de las ramas para mejorar el flujo de aire y que concentre su fuerza en las ramas superiores Vuelvo a redistribuir las plantas en el invernadero dejando a OnionOG todavía más protegida del sol directo, para tratar de disminuir su consumo de agua estos días que no voy a estar... Pongo una protección "visual" en el invernadero en el lado que da a los vecinos (cara norte), porque he "cazado" miradas indiscretas... Riego 500 ml H2O pH 6,55 OnionOG: Riego 1 Litro H2O pH 6,5 Día 63 (02/08) Debido a que me voy de vacaciones unos días, adelanto el riego semanal con Té y la aplicación foliar de Kelp Riego con 1 Litro de Té Vegetativo de Lurpe Solutions. Preparación: 24 horas con bomba de aire (oxigenación) con ingredientes: Green Sunrise 8 ml/L + Insect Frass 16 ml/L + Hummus Lombriz 8 ml/L + Melaza 1 ml/L + Kelp Hidrolizado 0,25 g/L Aplicación foliar Kelp hidrolizado de Lurpe Solutions a 0,25 ml/l Día 64 (03/08) Cerrado por vacaciones Día 65 (04/08) Mi amigo viene a casa a hacer un riego con 1 Litro de H2O pH 6,5 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
16
Share
Finally the fattening of the nugs has started on my earliest plant, the purple punch. Great exhibition of purple colours, furtermore i harvested vast amounts of nettle for my homemade: Nettles, bonemeal, 300°c baked clay and charcoal mix. Will be used in my next round of 5 plants( organic round). Happy smoking bros and sistahs
Likes
4
Share
Plantas das mais belas que ja cultivei os botões estao muito densos e grandes. Estao bebendo muita água afinal agora são vasos maiores que os de 7 litros que estava habituado.
Likes
14
Share
@suchydog5
Follow
2-3 buds were moldy so i had to cut them hope it doesnt spread further😳 to be honest i havent seen more beautiful flower than this purple one❤️
Likes
21
Share
@VicFor
Follow
Cruise control. Buds are getting thicker.
Likes
5
Share
@PapaTerps
Follow
Black Cherry Gushers - Barney's Farm Day 102 - watered with 3L of RO tap water with nutrients, mixed individually, in order and then pH'd to 6.3. She has finished bulking her flower and is now maturing, her leaves and part of her flower have started to take on a dark purple colour indicating that she coming close to the end of her lifecycle. I have started to reduce the amount of nutrients I've been giving her, as I prepare her for harvest. I will continue to do this untill her final week, when she will be given just plain RO tap water; this is known as the flushing process. Day 104 - she's about eight to ten days from harvest; about 60% of her pistils have turned amber and her trichomes are mostly milky - so today she'll be getting her first flush! 🤘🏻 I watered her with 5L of RO tap water with just a half measure of Bio Bloom and Top Max nutrients, and then pH'd to 6.3. Her next watering, the nutrients will be halved again, and from then on, she'll only receive water.
Likes
36
Share
A lot of TLC this week and she has bounced back! 😁Really had to dial in and give her the best environment possible. Flowers started to pop up below the canopy so I’m guessing all the defoliation was successful and she is coming back stronger than ever. Will watch for fox tailing as buds form to see if she is reacting from severe light stress early flowering days. Notes from the week: 9/15: Cut burnt tops off her today. Trimmed a lot of the burnt leaves. 9/19: She has recovered nicely from the light stress/burn. Flower stage does not seem to be affected to much. I have noticed some purple calxys and upper leaves near some tops seem to be fading and showing some purple as well. 😈
Likes
39
Share
3/12/25 Welcome to another week of this Grow that is in thanks to Zamnesia and Plagron! 🤙👊 3/15/25 they are now under a new evo3 which fits perfectly in this 2x3 When i was changing out the lights, i dropped the light and i smashed one of the plants R3 which is also the most developed plant at the moment. one of the branches didnt fully snap but i have it held up with a soft twist tie and the help of neighboring branch. The plants have been stretching quite a bit over the course of the last week