Likes
Comments
Share
@Agusthen
Follow
I have not added any nutrients yet as its day 20 , they germinated on the 2nd of April and it's been 20 days , plenty of nutrients in soil coco mix , temp and humidity good and just added two additional fans today one outside and now 3 inside, extract fan timed 8 times a day to come on for 15 minutes , air intake and circulation fans on for 30 minutes every hour , 18 hours of light for now
Likes
44
Share
@RakonGrow
Follow
Note: jegliches Equipment findet ihr in der Germinations Woche . Day 22: PPFD 410 * 20h = DLI 29.52 Day 23: Day 24: + Dünger + + 0.5 Flaschenwasser + + + Rhizotonic + + + Terra Vega + + 0.6 Leitungswasser + final PH 6.5 Day 25: Day 26: Day 27: + Flaschenwasser 2.5 L (PH 7.2 EC 0.26) + + CanaCym + Final PH 6.1 = Drain : EC 1.325 Sieht bissel danach aus als hab ich etwas zuviel Urgesteinsmehr in die Erde eingearbeitet :)) Muss ich halt bissel spaarsamer mit der Düngung umgehen . Day 28: Das Wetter und die liebe Luftfeuchtigkeit :(( Manchmal denk ich das ich Outdoor growe :)) Im Video sieht man schön wie der kleine Zwerk sich selber mit seinen riesen Blättern SCROG mäßig den Wuchs in die Breite erzwingt :)) Die Blütentriebe müssen halt den Weg zum Licht mit aller Anstrengung erreichen .
Likes
10
Share
Plants are doing well, The 84" inch tent is a must if your not training or topping. I removed all the sacks that appeared last week and I haven't seen anymore show up so fingers cross, I check daily. Bigger tent also helps with heat control as the air has more room to rise. Hope you all like the pictures, I started to take videos as they provide more detail with less work.
Likes
87
Share
At the start of week 10 she is on point and on scedule going to up her nutes during the course of the flowerstretch So when stretch is over she is at full strenght nutes and adjusted nicely....🙏❤️ Day 64:Some clean up and transplant in her final 10L bucket Spiderfarmer SF1000 specifics: Chips Brand: SAMSUNG Veg Footprint: 3 x 3 ft ,Flower Footprint: 2 x 2 ft Spectrum: 660nm,3000K,5000K and IR 760nm Frequency: 50-60HZ Amp: 100.5W±5%@AC120V, 98.8W±5%@AC240V, 98.39W±5%@AC277V Draw power: 100.5W±5%@AC120V, 98.8W±5%@AC240V, 98.39W±5%@AC277V Lumen: 16439Lm±5%@AC120V, 16327Lm±5%@AC240V, 16292Lm±5%@AC277V I'm so pleased with this product i am placing the order link: https://www.aliexpress.com/item/4000171217867.html
Likes
6
Share
She's finally gone into flower turn into a nice little bush and was a breeze to train I have started to do leaf stripping cause of environmental and cause of how fat the leaves are let's be honest a blurple light isn't the best light 🤣 but seriously this should be a lesson for me I like challenges we will see what we can yeild. Edit- been topped dressed on 1-10-24
Likes
30
Share
I had to transfer to the bigger pots the week. There was a lot of stretch in the cups and they were falling over. so will see how it goes this week. Coco with the Azomite and a little clone x myco powder at the root base, Just a baby feeding 1 mil/gal of the three part Emerald Harvest and Cal Mag in a 5 gallon bottle. PH at 6.1, then another 5 gallons of plain PH 6.2 water no food to get run off from the pots. The runoff was PH 5.8 so in happy with that. I got the time-lapse running so I will post it at the end of each week moving in to the next one. waiting on a green filter for the camera to help adjust the color so everything will not look blurpule. Cheers.
Likes
35
Share
Info : Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 56 since time change to 12/12 h. Hi guys :-) The buds are slowly but surely coming to an end :-). The next 10-14 days will be harvested. It was poured 3 times this week. One of them with GHSC enhancer. Everything was cleaned and checked. Stay healthy 🙏🏻 You can buy this Strain at : https://www.exoticseed.eu/ Type: Herz Og ☝️🏼 Genetics: Larry OG X Kosher Kush Indica 60 % / Sativa 40 % 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
32
Share
@Hawkbo
Follow
Most of them made it only 1 six shooter definitely didnt make it and a cream cookies is a lil stuck. I threw a mexican airlines in the old six shooter cup but just letting it germinate in the soil I havnt done that in a while. They are going to get another feed tmm. The medium is a 50/50 coco/soil mix since I'm using the green buzz and its organic I figured a little soil might be beneficial. Day 7 from germination they should be ready to go into their final pots in the next few days.
Likes
7
Share
Week 4 was actually pretty smooth. she was showing nitrogen and potassium deficiencies because she was being terribly underfed and because i had weened her off the veg nutes WAY too soon. I found the dyna gro nutrient schedule and ive been following that. i will definitely be following the schedule much better next round as i wasnt actually aware they had a schedule out. Shes currently week 5 day 1 and shes already fat af and super trichomey.s he still got at least 2 weeks left. she might be ready by week 7 honestly tho who knows guess well see. Ive been giving her 1 gal each time of dechlorinated tap water just straight water. it has been phd to 6.6 ph. runoff tested at 6.3 ph. will probably flush one last time before continuing the bloom feed.
Likes
11
Share
@LiamF
Follow
1.8L with nutes on day 44 1.5L water only on day 47 2L with nutes on day 49 I Did some defoliation, cut some fan leaves and very small branches, I Know its an auto and you shouldn't, but those leaves blocked a lot of light. She's acting pretty weird this week Her leaves get wilt at the end of the day(light cycle) and stay like this for couple of hours and then rises back up. I know they usually drop their leave at the end of the day but this is not the case because its stay like this hours after lights goes on. WOW! shes still getting taller even its her 3rd week of flowering! WTH
Likes
14
Share
@GRow_M8s
Follow
* 20/24 lights (4h/day rest) for 3 days.after that we continued with 24/24. * Add some extra advanced formulations from this week. ⚠️ Stay tuned 👇 🗓️🔜 week 7 --> we'll make a review to the progress of the different strains inside the tent with photos and vids.
Likes
23
Share
@canongun
Follow
Days 50 - 56 Last week, I had a major lockout issue with my plants, so I’ve started monitoring both the irrigation and runoff water closely. I had to do three rounds of flushing, but after that, my lady started to recover, which was a relief! Since I'm going on vacation for the next 10 days, I’ve been working on setting up an autonomous irrigation system, which I successfully implemented and built yesterday. It uses three 12V water pumps controller by Arduino Uno via H-Bridge motor drivers, each dedicated to one plant. The system runs from 9 a.m. to 11 p.m., delivering around 250 mL of water per plant per session. This means each plant will get approximately 2.5 liters of water per day. I’ve mixed all the nutrients in advance. I know the ideal scenario would be to add the fertilizers just before each irrigation session, but unfortunately, that’s not possible. Still, it’s better than nothing. The system has been running smoothly since this morning, and so far, the cycle works fine. I’ll improve it further when I get back from vacation. To prevent any future lockout issues, I’ve extended the irrigation cycles throughout the day to ensure the coco stays consistently moist.
Likes
28
Share
Likes
5
Share
Doing ok. Hard to battle humidity even though I have dehu and ac running . It’s 25 degrees and raining outside. some botrytis is showing up. Already ordered some particulate filters for air recuperators. Botrytis spores are supposedly 4 microns large or more. These filters are supposed to catch particulates smaller than one micron. Lets see if it helps stop the grey mold fucking bullshit.
Likes
7
Share
I haven’t tried smoking it yet but from the look and smell I feel like she will be sticky and tasty once it’s dried and cured. I will come back with the actual taste, and effect once she is fully cured.
Likes
3
Share
What a week! the weather has not been very gracious to us. It has been pretty hot all day and humid at night. The majority of the day has the perfect setting but when the sun is at its peak it definitely puts a tool on the girlies. :'( We got a bigger fan to circulate air more but well have to see how that goes... Hoping for rain and some extra clouds soon!
Likes
11
Share
Week 6 for this GreenCrack-in DWC hydroponique system🤘🤘🤘🤘🤘 💪if you apreciate hit the like buton😏😏 Yes you you
Processing
Likes
6
Share
Clones took out of dome 5 days ago soil was made 2 hot and got a bit of deformed leaves not looking so good as there fresh clones just rooted let's see what they look like in a week