Likes
Comments
Share
Used RQS propagator. 100% success as always, sprouted after 2 days. the top root was a bit exposed but she doesnt mind. tap rrot nice and long and strong. will wait a day until i move her to the growbox.
Likes
3
Share
Buenas farmers!! Después de pasarnos tres dias con sólo agua volveremos con la mitad de nutrientes durante los próximos dos riegos, ya empezamos a prepar nuestras plantas para la fase final ! Un olor espectacular y mucha resina espero guste buenos humos family!💚
Likes
13
Share
@buzbun
Follow
Its good growing plant,good cloning its all from 1 freebie seed!On flowering they stretching 2x maybe more im not expect it but all good.think need more Silica for plant like that for more strong stems
Likes
7
Share
3 weeks curing and i think its done now very strong and sweet smell. Really enjoy my first autoFlowering harvest with this strain.
Likes
10
Share
Les colas commencent a gonflé j'ai enlevé les grosses feuilles pour une meilleure qualité lumineuse. Pas signe de surengraissage(les pointe des feuilles ne sont pas décolorés), plante petite mais compacte avec une odeur d'agrume verte laissons la dans sa course pour la coupe de DuctchPassion@ la suite au prochain épisode.
Likes
79
Share
@Hou_Stone
Follow
Until now I lowered my Ph with the PH- from BIoBizz. It was working fine but this week I tried Plagron PH- and it works better, I need to add 2x less ph- solution to lower the ph of the same volume of water. I recommend it 😘 My instagram😉: https://instagram.com/hou_stone420?utm_source=qr&igshid=NGExMmI2YTkyZg%3D%3D
Likes
22
Share
Day 35 looking like these will go 9+weeks, buds are stacking good size buds well over 3ft and should prove to little no trim with this cultivar.
Likes
4
Share
🌸 Flowering – Week 7 | Day 48 (Day 83 overall) Quick update focused on the Future #1 plants. It has become quite clear by now that both Future #1 plants need more time than originally expected. In terms of development, they are still clearly behind and will very likely require at least 3 more weeks, possibly longer depending on how they progress over the final stretch. At this stage, the plan is simply to keep the run stable, continue without unnecessary changes, and give the plants the time they need to fully mature.
Processing
Likes
4
Share
Semana 4, todo muy bien, Juana la mas grande me impresiona.. es hermosa! En cambio Gina, sigue creciendo con otro ritmo, pero de igual manera esta desarrollando todo su follaje.
Likes
22
Share
Flowering day 37 since time change to 12/12 h. Hey guys :-) The buds have developed incredibly nicely this week. The smell is getting more and more extreme :-) . The whole plant itself looks perfect 👍. The growth has slowly stopped as the full energy goes into the production of the buds. This week it was watered 3 times with 1.2 l each (nutrients see table above) They were individually inspected and checked for their health. Osmosis water for the coming week was refilled in a 100 l tank 👍. Have fun reading the diary and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 A thank you for this wonderful strain goes out to Herzog https://instagram.com/herzog030?utm_medium=copy_link and the Exotic Seeds team You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. You can buy this Strain at : https://www.exoticseed.eu/ Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼 MadeInGermany
Likes
120
Share
The Harvest Prelude: After a patient wait and 48 hours of darkness, the moment arrived. The Tropical Tangie Lego Ninja, standing proudly like a silent guardian, was ready for the grand harvest. The sound of each cut echoed through the grow space, reminiscent of felling a mighty tree. The compact structure of the buds was awe-inspiring, a testament to the ninja's disciplined growth. The Lego Ninja, like a stoic warrior, was then hung upside down, beginning a two-week drying ritual. Maintaining an ambient temperature of around 21°C and a relative humidity of 60%, this slow-drying process allowed the buds to retain their essence, preserving the symphony of terpenes and cannabinoids. The trimming phase unfolded like a fragrant masterpiece. Each bud, adorned with a glistening layer of resin, transformed the trimming process into a sensory delight. The zesty aroma of oranges enveloped the room, a tangible expression of the tropical lineage. The compact buds made every snip a careful dance, revealing an abundance of frosty trichomes. The moment of reckoning arrived with the scale's unveiling. The Tropical Tangie Lego Ninja, from a single plant, bestowed upon me 309 grams of dried medicine. Each gram was a treasure trove of cannabinoids, a promise of euphoria and relief. The sheer compactness of the buds translated into a concentrated potency that left me in awe. In parallel, the clones, nurtured with equal care, showcased a fascinating divergence. A twist in the tale unfolded as the intense oranges of the mother transitioned into vibrant tangerines. This unique expression, I believe, was a testament to the clones weathering a summer heatwave differently, bringing forth a distinct personality. The clones, resilient and generous, gifted me a bountiful 549 grams of pure joy. This now my keeper of the garden, an embodiment of the Lego Ninja's legacy. The harvest dance, though familiar, carried the nuances of tangerine zest, a refreshing twist that left me eager to explore its intricacies. Both harvests shared a common thread—their resinous abundance. The trim bin, akin to a treasure chest, gleamed with golden trichomes and fragrant joy. Sticky fingers became a badge of honor, a tangible connection to the resinous richness that filled the room. Shout Outs: No harvest report is complete without expressions of gratitude. A special nod to @DutchPassion_Official for crafting the genetic marvel that is the Tropical Tangie Lego Ninja. Their expertise paved the way for this epic journey, and I tip my hat in acknowledgment. In conclusion: As the dust settles on this epic harvest saga, my heart brims with happiness and excitement. The Tropical Tangie Lego Ninja has proven itself not just as a plant but as a living masterpiece. Stay tuned for the smoke report, where we delve into the true essence of this botanical ninja's legacy. Until then, fellow cultivators, may your gardens flourish, and your harvests be as bountiful as the joy they bring. As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and blessed with you all in my life<3 <3 <3 #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience With true love comes happiness <3 <3 <3 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3 <3 <3 Friendly reminder all you see here is pure research and for educational purposes only <3 <3 <3 Growers Love To you All <3 <3 <3 P.S- I must extend my sincerest apologies for the missing video reports. Regrettably, Grow Diaries is still facing some technical issues that are preventing me from uploading them. Rest assured, as soon as the situation is resolved, I'll share those videos to give you an even closer look at this fascinating journey. or in my case apparently GD dont let me do uploads over 100mb with is super small file if you working and editing videos , doing my best here to upload them all but GD is not making my life easy on this <3 <3 <3
Likes
5
Share
Creciendo muy fuerte con notorios cambios desde su transplante
Likes
34
Share
Week 6 Flower — Sundae Driver (deep dive) Quick recap — From seed to Week 6 • Germination: Pillbox + water enriched with Aptus Regulator / Start Booster; three seeds, two kept. • Early transplant: Seedlings moved directly into final 11 L fabric pots with a living / amended super-soil (Janeco Light Mix + Aptus line + mycorrhizae, substrate buffer, micro-mix). • Short veg: Minimal veg time (early transplant strategy), light training (leaf-tucking) and one deliberate supercrop to control a “moon-shot” top. • Flower flip: You used an 11/13 light schedule to encourage a firm, fast transition into flower. • Now: Week 6 of flower — plants are large, heavy, and beginning to show clear resin development. ⸻ This week’s snapshot (what you told me) • Solution EC: 0.7 mS/cm (you stopped All-in-One liquid and pulled solution EC down) • Solution pH: ~6.1 • Soil/substrate EC: still comparatively high (you reported earlier numbers around 5–6 mS/cm) — the living soil is doing the heavy lifting. • Feed plan kept: Plagron PowerBuds, Green Sensation, Sugar Royal (all low-dose), plus Aptus Regulator and Aptus CalMag Boost. • Plants: heavy, bulking, obvious frost/trichome production; supercrop site is producing well. ⸻ Why you lowered solution EC and stopped the All-in-One liquid • Letting the soil lead. Your living, richly amended soil already holds lots of available ions. Pulling water-solution EC back to ~0.7 makes the fertigation a light steering input rather than the dominant nutrient source. That reduces the risk of salt buildup while letting the soil biology and reserves feed the plants. • Encouraging ripening, not more vegetative growth. Lowering soluble N input and total EC reduces vegetative vigor and encourages the plant to reallocate energy into flower development and resin production. • Cleaner profile. A lighter solution often helps express terpenes and can reduce harsh residual taste if you choose to flush later. • Risk management. With a high substrate EC you avoid compounding salts, but you must monitor runoff EC/pH to ensure you’re not drifting into deficiency or toxicity. ⸻ Trichomes & white pistils, what you’re seeing and what it means • White pistils (hairs): still plentiful, the plant is mid-flower, still producing new pistils while older ones will start darkening in the coming weeks. A lot of white pistils now is normal at Week 6; they will darken and curl as maturity approaches. • Trichome types & stages: you’re seeing more glandular heads and sticky sugar leaves. Trichomes progress roughly: clear → cloudy/milky → amber. • Clear: immature (not peak potency) • Cloudy/milky: peak cannabinoid expression, usually target harvest for a balanced high • Amber: more degraded THC → more sedative, couch-type effect; some amber is normal depending on desired effect • What heavy trichome coverage now means: the plants have moved into active resin production; enzymes and carbon flux are being directed to terpene and cannabinoid pathways. Continued support (sugars, PK, stable environment) helps maximize resin and terpene development. ⸻ Supercrop update — technical recap & why it worked • Mechanics: you bruised/softened the stem, bent it, and closed the wound so the plant formed a strengthened knuckle. That redirection reduces apical dominance and sends auxin to lateral sites. • Results you observed: rapid curve-up, additional bud sites along the bent branch, and notable fruiting at the knuckle/top area. That’s expected, the wound redirects hormonal flow and the plant compensates by boosting side growth and flowers. • Monitoring: the knuckle strengthens over 3–7 days; watch for any slow-healing splits and keep airflow over the site to prevent moisture pooling. ⸻ Why you kept Plagron + Aptus (what each brings) • Plagron PowerBuds / Green Sensation / Sugar Royal: targeted bloom stimulators (PK, co-factors, carbs/aminos). They help compact flowers, feed terpene pathways, and provide sugars/precursors that support aroma and density. • Plagron Sugar Royal: acts as a carbohydrate/secondary biostimulant — supports microbes and gives a sugar boost that plants and microbes use for energy in resin synthesis. • Aptus Regulator: supports stress resilience, uptake efficiency, cell wall strength — especially valuable under high light/heat. • Aptus CalMag Boost: maintains Ca/Mg balance, essential for cell structure and avoiding tip burn when uptake is rapid. • Strategy: Plagron drives bloom chemistry; Aptus protects physiology and supports clean uptake. With soil heavy on reserves, both are applied as focused steering tools. ⸻ Week 6: What is happening physiologically • The plant transitions from stretch to stacking: calyxes thicken, pistils begin to darken in the coming weeks, and trichome density increases. • Carbohydrate flux is prioritized to the floral sink; you’ll see faster water uptake and increased K demand. • Leaf yellowing in lower leaves often begins around now as N is remobilized to flowers, this is frequently normal in mid-late flower if controlled and not extreme. ⸻ What to expect next (practical timeline & signals) Expect (over the next 1–3 weeks): • Continued calyx swelling and denser flowers. • Trichomes moving from mostly clear → cloudy (you’ll start seeing the ‘frost’ become more opaque). • Stronger terpene aroma as sugars and PK feed resin pathways. • Heavier water uptake and faster EC changes between runs. Don’t expect (yet): • Final resin peak — that typically comes later (weeks 7–10 depending on genetics). • Immediate massive ambering — amber trichomes usually develop later in the finish window. • No surprises — biological systems still can flip; remain monitoring-forward. Watch closely for: • Runoff EC & pH after a couple of waterings — if runoff EC climbs very high, consider a mild runoff correction. • Humidity & bud density: keep RH controlled to avoid botrytis (mid 40–55% during heavy stacking; lower as flowers bulk). • Magnesium / Potassium signs: interveinal yellowing (Mg) or edge cupping/crisping (K) — maintain CalMag and consider K if uptake accelerates. ⸻ Actionable checklist for Week 6 • Continue solution EC ~0.7 and pH ~6.1; treat fertigation as steering. • Measure runoff EC/pH at least once this week — log the results. • Keep Plagron bloom stack + Aptus Regulator & CalMag at light doses. • Keep canopy airflow high; consider lowering RH progressively if buds bulk fast. • Prepare stakes / soft ties or light trellis for heavy colas (supercrop sites may need support). • Microscope checks: start daily/alternate-day inspection of trichomes with 30–60× loupe — photograph if you want a timeline. • Avoid heavy new training; minor tucks/leaf removal to open air/light only. ⸻ A short note on flushing (planning) • Many growers flush with pH-balanced plain water 1–2 weeks before harvest to reduce soluble salts and tighten flavor; opinions vary. If you intend to flush, start planning timing based on trichome stage, not calendar alone. Your living soil and current low-solution EC approach already help keep things cleaner. ⸻ Final reflection — gratitude & community Week 6 is where the plant’s intent becomes visible: form into flower, pack on weight, and build resin. Your measured decision to pull back water EC while continuing Plagron’s bloom stimulants and Aptus support is a smart “steer, don’t force” approach that lets the living soil and the plant do the heavy metabolic work. 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. • GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial • Instagram: https://www.instagram.com/dogdoctorofficial/ • YouTube: https://www.youtube.com/@dogdoctorofficial ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: • Genetics, gear, nutrients, and more – Zamnesia: https://www.zamnesia.com/ • Environmental control & automation – TrolMaster: https://www.trolmaster.eu/ • Advanced LED lighting – Future of Grow: https://www.futureofgrow.com/ • Root and growth nutrition – Aptus Holland: https://aptus-holland.com/ • Nutrient systems & boosters – Plagron: https://plagron.com/en/ • Soil & substrate excellence – PRO-MIX BX: https://www.pthorticulture.com/en-us/products/pro-mix-bx-mycorrhizae • Curing and storage – Grove Bags: https://grovebags.com/ ⸻ We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚
Likes
23
Share
@GrowSmith
Follow
I have been flashing for two weeks now I thought it was ready last week but this planet is slow to harvest I think a week or two it will be ready Left in two days of darkness to encourage finish. Worked on half of the plant
Likes
4
Share
Delta 9 cada 10 días hasta 4 veces maximo De 0,5 foliar hasta 5 en riego
Likes
1
Share
@mheat
Follow
She gettin fat!!! I upped her bloom a bit...She loves it! Wish she could have gotten more light and less stretch.
Likes
66
Share
Dear Friends ❤️ in this week we topped again and bended this great Headshot by Seeds Mafia I topped the plant and remove big fan leaves that covered bud sites I missed to give top crop Big one at 14 october, it is important to give 10 days before flowering The last day of this week we switched the light to 12/12 week #5 of vegetation The 240w light is working at 50% power and now it is combined with the 480w quantum board. I consider week 4 the week from 18/10 to 24/10. day to day fert schedule: 📅 18/10 📅 19/10 NEEM OIL 📅 20/10 📅 21/10 Top Veg 3ml/L-Deeper Underground 2ml/L - Green Explosion 2ml/L - big one 2ml/L - PURPINATOR 1,2ml/L 📅 22/10 📅 23/10 📅 24/10 ABOUT HEADSHOT BY SEEDS MAFIA Headshot is a feminized cannabis strain that may grow in any environment, whether it is indoors or outdoors, and is therefore recommended to both experienced and inexperienced growers. The plants grown from the Headshot Feminized seeds are tall, compact and robust, and reach a medium height of 100-150 centimeters. Their flowering period is short, about 50-55 days. They give dense buds fully covered with a thick layer of resin. Also, this variety has quite a popular feature, it has a high productivity. It may be harvested in October and yields about 550 grams per m2. The plants reach a high THC content of 19%. Obtained by crossing AK47 and White Widow, Headshot Feminized is 30% sativa and 70% indica. Its flavor is sweet and reminds of sandalwood and oriental incense. Its name comes from its effect, which is rather cerebral and uplifting, perfect for relaxing and calming down. Data Sheet: Sex: Feminized Grows: Indoor, Outdoor, Greenhouse Height: ≈ 100 - 150 cm Yield: ≈ 800 - 1000 gr m2 Flowering time: 8 - 9 weeks Complete life cycle: October Cannabis Genetics: White Widow х AK-47 THC: 19% Type: Sativa 30%, Indica 70% 💸💸💸💸💸Buy Headshot: https://seedsmafia.com/en/feminized-cannabis-seeds/headshot-feminized.html OUR GERMINATION METHOD STEP BY STEP I Germinated all seeds in cotton pads because in my opinion is the best way, I'll tell you why. Why use cotton pads? You should use cotton pads because it is one of the fastest way to germinate seeds, it is also one of the more reliable way. This is a NOOB-FRIENDLY tenchnique, you have to respect some little and easy steps: -take one cotton pad, spray it 5 times with water; -dispose seeds in the sprayed cotton pad, remember to leave minimum 1cm of space between seeds, -take a new cotton pad, spray it 3 times with water, face it down and put it on the seeds of the first cotton pad; -now, spray the dry side 3 times. -put this/these "sandwich/es" in a sealed container of a sufficient size to store them, I use like a plastic tupperware (glass or plastic are equal) with about this size: 15x30.It contains about 8 "sandwitches". -store the container in a dark place with a temperature from 17°C and more. More light they see and colder is the place,slower will be the germination and lower will be the germination ratio. *(-If your seeds are old, not good stored and with a low germination ratio, I suggest you to use Seed Booster by Plagron. Old seeds and maybe stored in a very hot place for a long time may will be death may will not never germinate). Generally a normal cotton pad is good for 3 seeds. If you follow these steps, you will hardly have problem of non-germinating seeds. I tried all methods (except rockwool cube) and in the last two years (and I germinated a lot of seeds) I can tell that this is the faster and reliable way. I loved to use paper towel but with this metod is very easy to put too much water and it will be slow down the germination step. I really hope that this "rule" will help noob growers and maybe will help other growers to improve their skills. I personally do the step by step draw guide. ENJOY. 🔧💡WHAT WE ARE USING💡🔧 -LIGHTS: 💣Quantum board - 480w - 4x120w Boards by Zhoangshan Koray Opto-Electronic Ltd. Samsung LM301B 288 led/board +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B temperature: 3000k Heat dissipator board: No Noise: 0dB 💣Quantum board - 240w - 2x120w Boards by Shenzen Yuanhui Led Ltd. Samsung LM301H 504 led +24led/board led Osram 660nm Efficiency 2.7 umol/J 220 lm/w Driver: Meanwell HLG-240H-48B temperature: 3500k Heat dissipator board: YES 15MM Noise: 0dB -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Power: 42-50W RPM: 1940-2620 minimum -1 Maximum air flow: 430-560 m³ / h Sound pressure level at 3 m: 32-44 dBA -FANS: A)OSCILLATING FAN Maximum consumption: 20 W Minimum consumption: 17 W Fan diameter: 15 cm Housing diameter: 20 cm Height with handle: 35 cm 2100 revolutions per minute Two speeds B) COMPUTER FAN Sunon DP200A - 230V Nominal power: 22/21 Watt Noise level: 44 / 49dB (A) Rated speed: 2700/3100 RPM ± 10% Air delivery: 95/115 CFM C)Cornawall Electronics Multifan Turbo, three speeds, can be used both on support surfaces and mounted on the wall. High capacity, about 740 m3 / h, can be used in medium-sized rooms. High silence and reliability make it adaptable and versatile. Technical details: Rotation range of 90 degrees Tilt adjustment Three speeds of rotation Suitable for wall and ceiling suspension Power Consumption: 35 Watts Air Flow: Approx. 740 mc / h Operating noise: approx. 39 db Diameter: 20 cm Voltage: 220-240V Frequency: 50Hz Dimensions: L 28 x D 16 x H 28 cm 💊💉💊FERTILIZERS: MAIN FERTILIZER BRAND: TOP CROP I use these products: -DEEPER UNDERGROUND: to stimulate roots system -TOP VEG: for a excellent growth in the vegetative phase -GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth -MICRO VITA: bacterias for equilibrate the soil and to make the plant healty -BIG ONE: to stimulate bud sites and to stimulate resin production -TOP BLOOM: to achieve excellent big and hard buds -TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight -TOP BUD: to enlarge buds and to gain weight PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency GROTEK: CAL MAG for cal mag deficiency HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil. GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess - Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot These two products improve A LOT the smoke of our babies -PURPINATOR to stimulate flavonoids and to have a better taste and smell. ____________________________________________________________________________________________ ❤️ THANK YOU FOR BEING HERE ❤️ Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾
Likes
31
Share
Fed Recharge for the first time this week, also fed Espoma Organic Bloom. Did some defoliation too. She seems happy and healthy overall, but I see what I believe is LED light burn on some of the sugar leaves on the upper most buds. I jacked up the LED light as high as I can without completely reorganizing all plants, lights, etc. Even completely reorganizing the tent, I'd only be able to gain 2-3 inches of height so not sure if its worth it. Now that I harvested the Blue Mammoth I have a little room to try some LST-style bending and try to get the plant farther away from the light that way. We'll see what happens during the week.
Likes
16
Share
@osmrducks
Follow
Day 29: The girls are looking great. I upped the nutes yesterday, as I have been giving them barely any at all. Will up them once again on next feeding. Looking like tomorrow. The main branch that I snapped off did not make it. Lesson learned on that one. Day 30: Removed all other lights and added the HLG 550 V2 RSpec. Did some defoliation on the girls along with another feeding. Will do straight PH'd water next go. The girls are looking strong and healthy. 💪 Just on the small side. Still having to leave the tent wide open to subside temps and humidity. Day 31: Nothing new to report. Looking very short and stubby and healthy!! Day 32: Looking like they had some good stretching going on over the 3-day weekend. Will be needing fed tomorrow after work. May water a little less this time, as it is taking 2-3 days for them to dry out. Day 33: Great stretch and bloom on the girls today! They are looking super healthy and strong! 💪 No smell yet. Day 34: Girls are looking decent. Noticed some rusty looking splotches on the leaves. I'm thinking possibly Cal-Mag deficiency? Not sure. Day 35: Not looking too happy today. I let them dry completely and watered with only Cal-Mag. Hoping the patchiness clears up for them!