Likes
Comments
Share
@Mr_BFL
Follow
bloom, swell, with problems with salting. Lemon after 1-2 weeks on Harv, today I will start to rinse
Likes
12
Share
@Kirsten
Follow
26.12.24: I have noticed light stress on my plants. I had moved the lights further away and increased the light intensity to 70%. Unfortunately that created some issues. Namely severe palour of the leaves. To try and rectify the situation, I've dimmed the lights to about 30%, staying at the same distance, about 30 inches away. I measured the par levels, after I did this. They should a reading of anywhere between 40 and 150, at the canopy of the plants. They are all different sizes. This seems to have improved the colouring on all plants. After this evenings watering, I will monitor recovery and increase lighting intensity again slowly. I am also using the light cycle of 21/3, so the plants have many hours more light to absorb, than for example 12/12 or 18/6. 29.12.24: So I finally gave LST a shot, it's probably a bit too late, however I really want to get the most of the triploid pheno, and I went a little crazy and LST'd all plants except 2, as they're too small. I did that late last night, this afternoon I was amazed to see the plants turn their leaves back to the light source. I'm glad I overcame my fear of trying it. I'm very excited to see them adapt and progress! 😁 there are videos above with before and after of my LST process. I am pleased with the progress, considering all of my mistakes! Thanks for checking out my diary 🍃 ✌️
Likes
84
Share
@Coopmc
Follow
So much Pollen about to fly!! Looks like a few seeds starting to develop Daddy Dust Everywhere!!
Likes
151
Share
@BioBuds
Follow
'Not all those who wander are lost' What started out as an experiment, turned out to be an adventure of epic proportions. What hangs here behind me smells like the weed I knew in the 80's, skunky and full. But look at those buds. DAAAAANG.... These are the biggest buds Ive ever grown, I didn't know what darkness precisely did before.... now I know... My god after a few days they oooze cristal liquid from all its holes. They are greasy and sticky, full of weight and I think well hit the 300 grams per plant with this one, taking our total to 600 grams what would be 2 grams per watt used. If that's so, Ill never use another light again! Thank you Mars Hydro for letting us try it. And by god so should anyone wanting to up their growing game. Well keep you posted with the dried results and smoke report! For now thanks for checking us out again and see you soon X Bud and Sunshine!
Likes
189
Share
Day 57: not much to say but she’s very healthy at this point and producing buds everywhere. All good, getting closer to harvest each day!🌱 Day 59: she has started to smell really nice! Everything is going fine but I’m having some humid troubles again… Day 61: I just installed the second net and did a light lollipop and trim!
Likes
20
Share
Gracias al equipo de Fast Buds, Marshydro y XpertNutrients sin ellos esto no seria posible. 💐🍁🍋🍊 Lemon Mandarin: Esta variedad es para los amantes de todo lo grande. La Lemon Mandarin es el resultado de nuestro trabajo de cruce de dos deliciosas cepas cítricas: nuestra matriz Lemonade cut y la Tangie (selección de Crockett's Family Farms). Nos aseguramos de que se combinaran los mejores atributos de sus padres, como un efecto eufórico y vigorizante, una producción de tricomas demencial y un perfil de terpenos cítricos agridulces. La Lemon Mandarin es ideal para los amantes de los árboles enormes y los rendimientos XXL: puede alcanzar alturas de hasta 200 cm, mostrando una resistencia extrema y muchas ramas laterales. Su aroma es una mezcla perfecta de la Tangie, cáscara de limón y la dulzura calmante de la mandarina madura, que envuelve los sentidos en una fragancia profundamente picante de mandarina-limón que perdura mucho tiempo después de fumarla. Se comporta perfectamente tanto en interior como en exterior, y su impresionante crecimiento y encanto aromático la hacen ideal para los cultivadores que buscan una cepa realmente excepcional con una compleja fragancia cítrica. Basándonos en nuestra experiencia, aconsejamos realizar el Scrogging o cualquier otro tipo de sujeción, ya que las ramas podrían no ser capaces de soportar el peso de los cogollos. En interior, para conseguir el máximo rendimiento por planta, no coloques más de 2-3 por metro cuadrado, ya que esta variedad se vuelve muy tupida. También podría beneficiarse de una defoliación más frecuente, ya que produce muchas hojas grandes y anchas en abanico, y podría necesitar ayuda con la aireación más adelante en la fase de floración. 🚀 Consigue aqui tus semillas: https://2fast4buds.com/es/seeds/lemon-mandarin 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. 🚀 Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 📆 Semana 11: La Lemon Mandarin está alcanzando su máximo potencial! Durante esta semana, los tricomas han comenzado a mostrar una densidad impresionante y los aromas son cada vez más intensos, con notas cítricas y dulces que llenan el espacio de cultivo. Las flores están engrosando bien, mostrando un desarrollo robusto, y las hojas continúan sanas, aunque algunas muestran ligeros signos de estrés por la carga de flores.
Likes
91
Share
Welcome to Week 2 Everyone, You been just Invited to Take a Seat at the : -Designers Club - Special Thanks to John for hopping through my Messages to Join The SSSC/DP Photo The Project will be Supported by Narcos Seeds to give the Strain the Perfect lifespan it could Deserve . Light used for The Contest Grow : Tenty Pro x4 200w in a space of 60x60 Homebox Ambiente Tent. Were only Starting with 2 Plants from Fast Version B . One didnt worked well . Quickly Reminder , this Diarie will be a Time Eater . If you Enjoy what you see just show it with Some Thoughts and Thumbs in the Weeks. I will Appreciate that. Both Topped Early at Day 9 as Project and Time Deadline from Contest . Enough Talk from me , just Enjoy youre Seats and be a part of The Designers Club . Good Luck to Everybody and Keep up Growing !
Likes
3
Share
@CalGonJim
Follow
4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3. 4/16 543am 5ft tent sideways attached to 6ft table that can slide around
Likes
12
Share
@Coman
Follow
Harvest time has come for my first lady which was a little faster, and had a completely other aspect than ther other 2. A little purple color and shorter. Also got some issues during veg phase with her. Anyway got 428g nice good smelling wet buds from her an they are drying now. Will post pictures from harvest next week. All of them are cherry cola. The remaining 2 ladies look very promising and will be harvested and of this week. Today 70 days from seed.
Likes
39
Share
Todo resultó bien, pero hubo una semilla que a pesar de que germinó de manera exitosa no logró enraizar correctamente. Quedando con 14 semillas de 15 en total seguimos ...
Likes
19
Share
Likes
Comments
Share
Auch hier nochmal eine Erholungsphase vor dem letzten Topping und dem finalen schneiden und trainieren vor der Einleitung der Blüte. Die Eingriffe hat sie bisher gut weggesteckt und die Canopy ist dicht und vital. So kann ich sie ideal vorbereiten, um dann am Ende eine stabile Pflanze mit hoffentlich dicken und schweren Buds zu haben...😉
Likes
6
Share
2.08 A week with CO2 and good environment conditions. This growth rate is insane. Some of them suffered transplant shock. Cheers 💚
Likes
1
Share
Absolutely blown away by the new 2025 setup, prev ran 3 tents 😂, switched to AC Ifinity 2,4 x 1,2 single tent, 3 x 150 or 6“ fans. Fans all port outside, 2 exhaust with yet uncoupled carbon filters, 1 inlet with pollen filter. 6-7 air push fans (not all yet on 😂). SpiderFarmer 16L humidifier, inkbird RH control, inkbird heat control, heater, trotek dehumidifier (12L) with drain line and reservoir. Blumat system with RO fed 20L water butt, each pot with 3 long ceramic blumats. Data logger from SensorPush including WiFi hub and 4 sensors. One in cellar room (lung room), one above each plant canopy. Setup logger n sensors and track VPD. System running itself
Processing
Likes
6
Share
@Elmota
Follow
Esta semana supere al tercer nodo los 4 brazos y recorte las hojas que tapaban los brotes de la luz. Además comencé el entrenamiento. Atento a comentarios.
Likes
8
Share
@Salokin
Follow
The week went again pretty uneventful, other than me not getting the tip burn under control. I have further reduced base nutrients, removed the green sensation (simply because I ran out ;)) and increased pk 13/14 further. The buds continue to develop new pistils and continue to swell. The trichomes look mostly milky at this stage, I will however wait until I have around 20%-25% amber. I have cut a bud from the lower canopy (pictures attached), which is quite solid to touch and had a wet weight of roughly 1,2 gr and is currently drying. Overall the bud structure on this plant looks amazing the buds a re super dense, nicely clustered around the stems and she looks like she'll be a joy to trim.
Likes
18
Share
Lots of new growth this week, plants are healthy and doing well, one is a female the others I can't see yet.. Did some more LST on the one plant...
Likes
93
Share
@Roberts
Follow
Auto Opium has been doing some bulking. Looks like she has about a week left of bulking, then a week to ripen. She was starting to worry me. But has started filling in. Everything is looking good at the moment. Thank you Medic Grow, and Divine Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
29
Share