Likes
Comments
Share
One of them has been harvested at 8,5 weeks because she looked ready to go. While harvesting i recogniced some Nanas coming out of many lower buds. The other one is more appealing and has one week more to go.
Processing
Likes
18
Share
Here she is ! DAWG DAZE at Day 78/ Week 11 from seed. Standing strong at 22 inches tall from top of soil. Using only 2x 100w closet case LED @spectrum_king_led kept at 10 inches from tops. She's grown in a 3 gallon smart pot @smartpots with 2 1/2lb kind soil and filled rest with cocoloco bush doctor soil and fed only tap water every 2 days as needed..kept the daily temps between (day) 80°-65° (night ) and humidity between 30%-45%. My preference. ..did her final minor lst training to get them left side colas in line. She fattening up real good now and her aroma is a strong sweet lemon pine . Great to enjoy everytime I walk in. Shes reaching her final weeks of flowering now. Maybe 2 more solid weeks . Looking forward to it. Will update next week on her organic growth. Enjoy.
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
24
Share
End of 5 week of flowering. All three full of resin.buds are very sticky.. nice smell from closet.we will see in the end. 3 weeks till flashing my plants i think.
Likes
46
Share
@Seedler
Follow
Okkkkkkkay, i fucked up a little over the past weeks but sometimes keeping everything together is hard. But I managed to fix her, fresh water change, new nutrients and new Training so she can spread a little wider and also gave her a little trim. So pH is 5.5-5.8 DLI is at 30. i wanted to turn it down a little because she was looking really sad. but she is finally recovering, new growth is a nice green color. Having her this long in veg is really weird haha
Likes
11
Share
@w33dfoxPT
Follow
THIS IS NOT GELATO: IS MORE ONE HARVEST OF REST OF OTHER PLANT AND OTHER ONE. BECOUSE CONTESTS I CANT CHANGE IT SO, I WILL WRITE SOMETHING LIKE I HAD DO THERE, IN MARK AS BLUECHEESE THE GELATO ONCE I HARVEST SHE. NEXT TIME I WILL DO A DIARY FOR EACH SEED TO AVOID THIS CONFUSIONS. SORRY
Likes
61
Share
@Dunk_Junk
Follow
Only 11cm vertical growth this week. Flowering stretch slowing down and she's bushed out so much!!!
Likes
Comments
Share
Que pasa familia, vamos con la quinta y última semana de crecimiento de estas Pink Sunset feminizadas de silentseeds. Vamos al lío ,se trasplantaron en macetas de 7 litros definitivamente. El ph se controla en 6.0 , la temperatura la tenemos entre 24/20 grados y la humedad ronda el 50%. El ciclo de crecimiento puse 16h de luz, el foco está al 50% de potencia. De momento van creciendo a buen ritmo y tienen un buen color, aplique de manera foliar el tetra 9 ahora cara a la floración. Agradecer Agrobeta por el envío de un kit para la temporada, son unos jefes. - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨
Likes
2
Share
Likes
3
Share
Defoliated her, giving her more light to the lower buds.
Likes
17
Share
@Sativa763
Follow
Day 70 after switch. its going to end soon I think. 65 - 70 days recomended by breeder. Maybe I will just not water again and let her slowly die 😱 she looks good - beatutifull almost - although I inspected a problem at one of the buds... more in my question that I will create. bigger leafs are getting soaked out of nutritions and start to get yellow. probably the last time you see her alive. I try to recap a little bit of the veg. phase in the upcoming week to get the diary a more "complete" look 😎 Also I will update you as soon as I got this in the glasses. thanks for your participation on my way with ralph wigum from root riot seeds (almicanna)👌
Likes
8
Share
In places like where I live, it's easy to get mold, pests, or powdery mildew (the most common problem). Next week, my 30L adjustable dehumidifier and Spiderfarmer power strip are arriving to better control everything, along with other accessories like CO2, VPD, etc., to have maximum control over the grow at all times. Besides that, even though it's late, I'll add the Spiderfarmer supplemental lights for the recommended and maximum duration. We'll see how it goes; if not, I'll try the Migro lights. And I'll probably do a grow room next time with Migro lights—they're the best value for money. I'll keep you updated on the results with the UV lights. I've had to move twice; my plants are a bit stressed, but if you're careful, you'll never have a problem. Looking forward to seeing my girls in a few weeks!
Likes
3
Share
. 📹 : Full Video on YouTube @hinterhofgrower, please like & subscribe 🌱 : Chiropractic & Defoliation on day 38 & 40 💧 : 4l day 36, switch to wicking SIP; 4l day 38, little runoff, 4l day 40 💡 : Dli: 45 mol/m²/d 🤔 : In week 6, the stretching began. To control the plant's height and ensure all flowers receive equal light, I used the Kushman Chiropractic technique. This involves softening branches by applying gentle pressure between the fingers, making them easier to bend. It also increases the plant's activity as it tries to strengthen the bruised area. A little LST (low stress training) and, of course, defoliation were also part of the process.
Likes
3
Share
@kdifiori_
Follow
Nine weeks have passed, as you can see from the photos; despite various nutrient-related issues, the flowers are producing plenty of resin. This week, too, they absorbed a liter and a half of nutrient solution. Stay tuned.
Likes
34
Share
Here we are ready for the right harvest on the last day of the contest. I am very satisfied with these plants, they are over half an ounce per plant but it can even reach 70-80 in my opinion. Wet cut is scary. Beautiful strain with different phenotypes, the two tall girls are already in the dry room, these two are pure fire. Big effort during the harvest but a lot of grass. The resin you'll notice is there as well and we can't wait to taste it. Music of the week Radio Nula from SLovenia https://radionula.com The seeds are legendary AM growers https://supersativaseedclub.com Light comes from Mars https://www.mars-hydro.com
Likes
2
Share
@viggagrow
Follow
I started to feed him a little more Monster Bloom, which seemed pretty cool. I continued to spray blizzard once a day for 1 week, and base water.
Processing
Likes
17
Share
@Tazard
Follow
We are nearing the end and she looks beautiful. I will flush with plain RO water the next week or two while she ripens. I didn’t do any training to her. I have a clone from her and I cut a few leaves from the top of the meristem when she was vegging and she responded with 6-8 branches catching up with the top.