Processing
Likes
Comments
Share
Likes
26
Share
@CapeGrows
Follow
This week was about pushing in to full flower. I am more than happy with the size, reaching a meter in length and in width. The side shoots caught up beautifully with the main cola and we have a lot of bud sites with great spacing.
Likes
17
Share
She is flowering more and more each day and getting bigger than I expected haha. I have had to construct a makeshift "scaffold" around the tent so I can hang the light higher. The leaves are now slightly to big for the tent, so I hope she dosent get much bushier. Lots more pistels, and lots more growth, quite happy. # new tent coming 😁
Likes
24
Share
Day one of week 7! Saturday 3rd Oct. Yay I made it to week 7!! First week of flower! Flipped the lights and the girls are getting their first 12 hours of darkness as I type. As soon as it’s lights go on I’m gonna get the next lot of nutes in as they seemed almost ready for a feed when I put them to bed. Getting a little nervous the temps are a still bit high as we go into flower but these girls seem hardy so staying positive! UPDATE: Day 2 of week 7, Sunday 4th Oct. Girls still looking strong and nutes gone in again today. Got a fan blowing onto the outside of my tent (which is helping lots) as the slightly lower humidity levels are really heating things up with the dehumidifier working harder inside the tent now, especially around watering time. Fan at full whack, if this doesn’t work I may have to get an intake fan but was trying to avoid extra costs. Keeping a close eye 👁️ UPDATE: Tuesday 6th October Day 4 of week 7 Nutes in again and a little more teasing with the LST to keep the girls low on the stretch. Think I found a little white hair 🤩🤩 (see pics).... It’s getting exciting.. 🤓 UPDATE: Thursday 8th October Day 6 of week 7 Ok great news today.. All four ladies have some pretty little pistils all over various bud sites and no hermies in sight! Phew! 😅 Nutes going in too 👌🏼 Happy growing and all that jazz! 🍃🍁👌🏼❤️
Likes
28
Share
Tag 17 seit Beginn der Zeitumstellung. Der Stretch ist noch nicht abgeschlossen aber es sieht schon ganz gut aus. Da werden einige Triebe Potential haben. Morgen wird mit 2g Bloom Topdress nachgelegt. Erste Mischung zu Start der Blüte war mit 3g / L. Ich gehe von 9-10 Wochen für die Blüte aus. Der Magnesium Mangel bei der Notorious THC scheint gestoppt zu sein. Ich habe Bittersalz mit 0,5g /L gegeben. Silic Rock ist schon länger nicht mehr dabei. Da muss ich mehr auf dem PH Wert achten, für diesen Lauf pausiere ich damit. Bemerkenswert ist bei der Garlic Budder, dass direkt Trichome erscheinen. Dazu diese interessante purple Farbe. Ich habe keinerlei Ahnung vom Stecklinge schneiden, aber ich überlege das zu probieren. Am Ende der Woche wird eh alles kräftig entlaubt. Ist die Frage womit die Stecklinge beleuchten? Eine Q1W wäre noch vorhanden.... Wünsche einen guten Start in die Woche. Edit 17.02. Eine Nahaufnahme der Garlic Budder hinzugefügt. Ich habe noch nie so eine purple Blüten Entwicklung direkt ab Start gesehen. Interessant. Und dann noch Bilder der Blueberry Muffin aus dem kleinen Zelt. Läuft ganz gut, ist alles irgendwie kleiner, ist komplett neu für mich.
Likes
199
Share
Start of week 2 🌱🍁 Unfortunately some poor advice led to a nutrient overload. 350-400 ppm is far to much for a seedling so back to 150 for a other week until I start adding tarantula. Maybe other strains can handle it but the peyote didnt like it. See you in a couple of days 🌱🍁❤️ Watermelon zkittlez autos looking good. Just want them done now so I can give the photo periods some decent light and space
Processing
Likes
15
Share
Hi... So this is my first time taking things a bit more seriously. Open for tips and advice. usually looking fore flavor rather than production. First week on 250w Also, pics are taken with the mobile... better pics next week
Likes
1
Share
Sie haben noch einen kleinen Schnitt bekommen. Unteren Triebe wurden entfernt und die Haupttriebe sortiert. Jetzt haben sie noch Tage und dann geht's auch schon in die Blüte.
Likes
2
Share
@Aleks555
Follow
Humboldt - Golden Sands And so we begin the grow! We germinated the seed in a damp sponge, and it sprouted within a day. We've planted it in a 100-gram plastic cup, and now we wait for it to start growing. A huge thanks to Humboldt Seed Company Europe for providing us with such amazing genetics. We're excited to see how this beauty develops and are grateful for the opportunity to grow such a top-quality strain!
Likes
2
Share
Week 3 Flower (Bloom Week 3) – Daily Tasks Evening (Lights On) Check environment (temp 24–27°C, RH 55–60%). Inspect leaves and buds for pests, mold, or deficiencies. Water/feed (depending on medium): balanced bloom nutrients with slightly higher P and K. Ensure good airflow (oscillating fans). Adjust plant training (light defoliation if leaves block bud sites). Check for early signs of stretch finishing. Evening (Before Lights Off) Ensure irrigation is not too late in the cycle to avoid wet medium during dark period. 👉 In Week 3 bloom, the plants are finishing their stretch and starting to put more energy into forming bud sites. Main job is: Setting Scrog net 2layers ,Control environment (VPD, airflow) ,Support the plant with bloom nutrients.
Likes
57
Share
Week 7 of flower in the books and we’ve had to adjust to the height issues in an attempt to salvage what we can of the largest mains on the cheese. Really should’ve done this 2 weeks ago and while it’d be preferable not to supercrop this late in flower - there really wasn’t a choice. It was done early in the week and the plant is none the worse for wear. On the whole, the nute burn issue has been rectified and while the damage isn’t massive, it’s still really obvious. For all the above reasons, We’re really not going to get that late flower look with this plant. Kinda sad there. Otherwise, the plants have begun to colour up and were quickly coming in to the harvest window. At this rate it looks like the gorilla cookies and cherry Bomb will go off first, with the cheese to follow and the lemon haze last. The GC is absolutely covered in trichs. We expect a great finish for this one. She’s unlike any pheno I’ve seen on here - ducksfooted with a pineapple shape to her heads but again, got it where it counts. The cherry Bomb is similar but also true to her description - huge cherry diesel scent coming off this plant. She’s chunky and sticky too so very pleased she’s made something of herself. The lemon haze is developing And rounding out slower. Trich production is moderate and I suspect she’s got a week longer than the rest. We’re getting there - maybe a week to 10 days. Almost time for jazz hands👍😎. Background/Repetitive Nonsense The strain line up on this grow is look’n quite saucy 😈. We’ve got 2 FB strains this time around - Gorilla Cookies (seems we always have some GSC cross in the works). Mainly because the colours look stellar and remind me of a sugar breathe we did last year that was 🔥. The other FB is their original Cheese strain... because we already smoked all our cheese... and we really like our cheese...😉. Emerald triangle was kind enough to include a freebie of Lemon Haze. Wasn’t really big on the list but we haven’t done a haze strain to write home about yet so worth a go👍. The last is a Cherry auto from Bomb seeds that we’ve been trying to get to for months. Let’s just hope that she’s not a dud like the last bean. The new digs for this run are courtesy MarsHydro👊. Their 2x4 single grow tent, paired with a shiny new 240w QB courtesy ViparSpectra. These folks were kind enough to discuss a collaboration and as a result, here we are to test out the gear with an inaugural run of autos. Each week, we’ll try to expand on some of the benefits of each, as well as any limiting factors or considerations that need attention when pondering purchase. Already I can say that both are high quality products in terms of overall craftsmanship. MarsHydro 2x4 Grow Tent: Excellent construction in terms of durability. Reinforced stitching on the zippers and corners ensures zero tearing. Conveniently placed screen vents and intake/exhaust ports. The ceiling exhaust port only exists on the right side. Perfect for me but not great if you’re running exhaust from the top on the left side (left side wall port makes up for this however). The aluminum frame is rigid enough to support the weight of the lights and accessories. Once you have some weight in the tent, she’s go’n nowhere and you can assemble and break it down in record time if moving or stashing the grow op. Only limiting factors I’ve noticed is that temp. Control will be an issue for a tent. It just doesn’t have the same insulating ability as a wood cabinet or other permanent enclosed space. No worries, this is offset by a small desktop heater and keeps the environment exactly where desired. The other issue was a production problem - the ceiling vent was accidentally stitched into the corner seams on the assembly line. Again, no real issue - just pulled it out with no damage or fraying to the tent or port👍. Website link here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-24x48x70-2-x-4-cabinet-closet-grow-box-upgraded-diamond-1680d-mylar-for-sale ViparSpectra 240w Quantum Board: This thing is sleek and slick in terms of design. Closest comparable to it that I’ve seen would be spiderfarmers line of qbs. They feature the same top-o-the-line components and roughly similar spectrums. Where VS takes the advantage is in the convenience of the dimmer nob which is easily accessible and works great at 50% with no strobing👍. The heat sink is also larger which contributes to lower temps. That’s not a good thing in my case but beneficial for most folks. I can already say that this will be a great fixture through all stages of growth. Where I know this light will excel will be in the veg. Stage for sure. Dimming function gives seedlings a much better chance of success with the ability to use lower lighting levels early on and the coverage area on a 240w is great. The average grower will find this panel suitable and fitting to their needs in a 2x4 grow space although I’d suggest 2 units if going any larger than that. The total output in this space equates to about 30w/sq.ft. Which is a decent amount of coverage based on power vs. Growprint. Ideal for veg. Certainly but, in flower - I tend to run closer to 50-60w/sq.ft to achieve higher yields. Again, similar fixtures have performed admirably in the past and while this wouldn’t be considered an “entry-level” fixture, I’d recommend that any grower new to the game not skimp on lighting and start with one of these. The price points are a great value for quality LED tech. These days, so there’s little reason to even consider a lesser fixture👍. I have no detail on limiting factors for this light as yet but have heard that stock branded fixtures don’t necessarily incorporate enough red diodes. I’ve seen no issue myself but confess - I’m no lighting guru. Website link: https://www.viparspectra.com/collections/xs-series/products/xs-series-xs2000 ***8% discount when using code: “ItBudWhisper”*** Happy to have you along for the ride if you made it this far through my opening rant!!😎🤟😎🤟😎
Likes
Comments
Share
@Budhunter
Follow
Week 1 flowering - Day 6 of flowering & Day 62 of life Finally flowering here. It’s been 5 days on flowering, still pre flowering but finally the best is coming. Lemon cherry pie is going well, many bud sides, let’s fatten up them 💪🏼🔥✨
Likes
Comments
Share
Fed some straight pk the other day.
Likes
11
Share
This week has been great! Germination on all 4 Pre 98 Bubbas and 2 Dirty Blondes was a success!! We planted them in there pots an through out the week we gave em each a very light spray down of pure water phd at 6.5 and by Friday they all popped out the soil Let’s go!!!!! Next week we will start light feed on nutrients , so y’all keep them eyes peeled for next updates an I appreciate y’all for following my grow !!😶‍🌫️💨💨💨🙏🏻💚💯🤙🏻
Likes
4
Share
@MADMANk
Follow
Think these will be done by end of week 8 possibly, adding UV + IR for terpes and pushing for an earlier finish! 🍋
Likes
3
Share
@WeedWagon
Follow
Day49: -cut away new lower nodes but keeper the fan leaves -watering 1l/every 2-3 days - LST correction every 1-2 days to keep an even canopy - one branch of top branches grows at a faster rate -looking healthy -Day56 switch to flower phase
Likes
35
Share
6th week of veg. Is finally in the books and all systems are go for the flower show. As they’re revegged clones, their branching structure is just ridiculous. Sucker branches everywhere pulling nutrient flow away from the winners. Right before we flipped and as per videos - we gutted every single plant and crushed it down to no more than about 7 tops max per plant. The whole goal is only to flower select, top shelf bud with every opportunity (and space) to grow to its fullest potential. So far, Druid nutrients has fit the bill for every one of em and they’re all extremely happy on this system👍. We also couldn’t resist and snipped another run of clones off each one but the Skywalker. Not sure if the boogie nights or blueberrys will make it but u never really know do you🤷. That said, the diy aerocloner has been a beast for us and minus an aphid issue last round - she puts out a 100% success rate😉. We’ll use the best of these as complimentary to reg. Run of some spicy bitch we’ve got coming up. Even if the pollen chuck is a failure - we won’t be losing any of the elite white widow or blueberry genetics🤞🤞🤞🤞. Other than that - it’s all wait’n on the buds now👍👌👍. Until next week. Background This ones tied to part 2 of the pollen chuck. They were supposed to be a clone run for pollination but the mothers all reveg’d due to a timer incident and high stupidity. These will be the inaugural flowering run of the revamped dutchy system. Growing made easy😉. Shit ton of finagling and setup but once she’s ready - sit back, relax and watch em grow😍😎. Thanks for take’n a look.
Likes
Comments
Share
Fed GH 3 part with Terpinator in flower and some recharge occasionally.