March, 19th. The Triple G stopped stretching They are concentrating in budforming. The Plants looking "leggy"... bud flowers sitting along the Branches I topdressed Silica, for making Branches stronger Iam fertilising every other Day with 3ml/l Organic Bloom Liquid , and 2ml/l Organic more PK I discovered Spidermites on one Triple G Plant... aaaarg😈 I have no clue why😒 I ordered Predators, and Iam quite sure , i can beat them. Because i have seen them very early

This week the flowers really started to bulk up. I was worried about having very loose buds as the development starts off very slow but eventually they really bulk up nicely!! The topped plant is about 2 weeks behind in flower but has way more main collas! Check the last video for both plants

One more week and then harvest she is not a big plant but definitely super frosty

Day 56 Flower Day 7 MAg issue seems to have gone away. they are kinda stretching

Ms Grapes an Cream from Atlas seeds is comming in amazing on week 4 of veg she is still the biggest she's growing great after being topped thinking about topping her again have had no problems with her she's growing more every day under the medic grow fold 6 Ending week 4 this girl continues to amaze me with how vigorous she's been growing she's been topped a couple times now an really thinking about giving her another one she's been growing so great with these nutrients from cultured biologix

All feeds with nutes use either a whole ratio or combination of "Veg Mix" and "Bloom Mix"concentrates DILUTED in water until a total ppm of add in is reached using a (Total Dissolved Solids)TDS Meter measured in PPM (parts per million). The "Veg Mix" concentrate will eventually be added in smaller ratios and "Bloom Mix" concentrate what will eventually replace the "Veg Mix" concentrate entirely with the ppm and ratios listed when I feed. Veg mix recipe is on week 3. Bloom Mix recipe is on week 5. Day 49 VPD is okay now - temps at 75F RH also now at 65% with ILVent at 50% = VPD of 1.04 - ppfd also same as yesterday mostly 480 to 490 around the ring with 510 and 520 in the center Took ph readings as well - 3 readings 6.43, 6.48, and 6.37 to avg 6.426 Which is good because she's starting to show signs of stress after the topping and defoliation from a couple days ago. The leaves are starting to curl at the tips and the bronze color stripping is happening again - however this time seems to be a slower progression so Im hoping that having the correct ph this time will help while she's re-routing her resources. I 'did notice also that the growth tips seem to be growing at a slower rate than before - I think she's at her limit in colas and the roots are having to find more space to spread, may even be too big for the 5 gallon pot. I have no plans to change her out just yet, but will monitor. Soil is drier today - so I will be watering tomorrow with de-chlorinated water at 6.4ph Day 50 VPD was good at 74/64 with the tent open while I feed that I left it open for a bit and took time in feeding and cleaning - after all that still good at 74F/61%RH/50%ILV ppfd was checked after water and setting back - same as yesterday as most of the newest growth is still coming from the new colas - most seem to be adjusting 1 at a time in each split but both are showing growth now on all cuts. Started feed by making new ph buffer solutions, calibrating/testing both meters. The have about a .15 variance between the two. Checked weight and made 1.5 gallons of feed. started at 228ppm added 450ppm veg and 150ppm bloom for a total of 833ppm feed/epsom salt - splashed h2o2 and ph'd to about 6.4- I fed via watering can and spray and fed the whole amount slowly since I was feeding until bottom drip and she took it all before starting to bottom drip. Afterwords I let her drain (about a quart came out) and checked ppm from runoff at 2500 (telling me she's okay but isnt eating as much as before her topping yet) ph is a mystery - I show 3 readings from top level of 6.62, 6.57, and 6.57 for an avg 6.586 but 2 separate readings from 2 meters (4 readings total) on the bottom runoff showed 5.3 and 5.6 then confirmed later. I expected a variance since the wood ash probably stuck to the top side of the soil - but I didnt expect that much of a difference. I will monitor but honestly dont know what I should do, if anything other than watch. made a video of the fan movements and runoff drip Day 51 What I am calling "stress burn" is progressing as expected. I am monitoring the ph from the top as I did before, but again, not much I can do other than over water, so I'll just watch for now and compare rate of spread until she fixes her resource pathways. It seemed to take about a week to clear up after the ash treatment last time, so I am on day 3 of 7 for now with no treatment. Looking for a spurt of new growth to show and then I'll know she's better. Adjusted the lights to accommodate a week 6 level of 500 to 600 ppfd - that means I can raise the lights to the top of the tent and increase power. So now set at 3 tick up and 37 inches from the soil or 26" from the plant top. Now her ppfd reads about 540 on both of the center colas and 500 to 510 on the surrounding ring. Adjusting lights meant I had to adjust the fans up to medium power and re-directed them to blow at the edges of the pot; made a video. VPD is steady, but still warmer than typical (only by a couple degrees nothing too much) 76F/61%RH/50%ILV for 1.15 kpa on room VPD Day 52 VPD is higher now that I have the lights to the top of my tent and the fans on the lights blowing down at the pot. I moved the IL Vent to the top sucking out with the motor and vent outside the tent now. I also opened two lower air holes with my heater set for fan on the opposite side of the tent than the vent. Currently, I am at a max of 1.2 room VPD and ranging down to 1.0 so I'll take it until it does something else. 74F/65% RH/75%ILV - I will monitor to ensure it's stable. ppfd is same as yesterday as there's little growth still. Spots are still progressing on the oldest leaves at the same rate as before - however the newest leaves are not showing signs yet, so I will continue to monitor. Day 53 ppfd was a little changed today, showing that there's growth coming back now. lowest on outer ring was 500 with most at 520 and 530 highest, center colas were tested at 540 and 560ppfd. VPD was stable as I watched it most of the day since I made changes yesterday. Temps were 74 to 76 and RH was 61% to 68%. ILV was set to 33% with the bottom heater on fan to draw in air. lockout continues on the oldest fan leaves at the last top nodes. New growth is already marked in a couple of spots. I have about 6 gallons of tap water burning off chlorine now and will use about 2 gallons to flush at 8ph. I plan to dunk this weekend with feed so this will allow time to dry out and hopefully reset the ph and lower my ppm readings at the lower part of the pot before then. Day 54 Took Control pics measured VPD and ppfd Lights are at the top of the tent and second tick from highest power level. Lights to soil is 37 inches and lights to plant is 12 inches shorter so 25 inches leaves to light. currently ranging 530 to 550 around the ring and 575/580 ppfd at center (after feed and replaced). Moving the lights (day 51) made the tent hotter so I changed my ILVent to suck out at the top and fresh air in at the bottom - I have been fighting to keep temps under 78 managed to hit 74 to 75 with the heater being set just to fan for the bottom air vents- I did also raise humidity to a setting of 65% a day before moving the lights, so Im hitting 61 to 68% between power cycles on the humidifier. Overall Tent VPD is 1.0 to 1.2 as max. Took controls for feed. Weight 16lbs 11oz. tested and calibrated 2 meters and took 4 ph readings of 6.55, 6.77, 6.53, 6.85 to avg 6.675. from top of soil (last runoff measured 5.6 and 5.3 on two meters) prepared 2 gallons of feed at 500 ppm over tap. (burned chlorine off overnight) starting ppm was 217 - added 75/25 veg/bloom ratio. ph balanced to 7.8 and 7.63 on separate meters (rinsed and retested to be sure got 7.79 and 7.63 again) I used 4 knitting needles in the soil about 3 inches from the plant center. Poured feed water over the needles until it pooled slightly on top of the soil, I then pulled the needle out a little to allow the water to drain into the holes better. I did this in 8 different spots. As soon as she started dripping water from the bottom I poured a little on the leaves and then moved the plant to another drip pan to finish pouring the rest over the top of the soil without dripping any over the sides. Took videos of the drip and waited 10 min before putting her on another clean drip pan and back in the tent. Runoff from second drip pan was measured twice at 5.8ph and 2410 ppm - and first pan 5.85 and 2670ppm (expected higher ppm since I moved perlite on the bottom with the needles) Defoliated the oldest leaves before lights out. Day 55 She mostly looks like she appreciated the clippings and ph balance from yesterday - slower progression of the lockout issue and largest new growth since topping day. So speaking of new growth, I plan to use LST in the next few days to set these colas in what will hopefully be their last bind around the ring. VPD is steady at 75F to 77F and RH is between 63 and 68%. My ILV have been set to 33% and the lower fan blowing rather than heat. top soil ph was measured with 3 readings, on a tested and calibrated meter. 6.47, 6.7, 7.12 to avg 6.763 (kinda wild in those readings so I double checked them all twice and got the same in each hole)

Bonjour à tous les padawans et maîtres jedis Jour 112 arrosage avec 4 litres d'eau ph6.3 Jour 115 arrosage avec 2 litres d'eau ph6.3 Jour 117 arrosage avec 2 litres d'eau ph6.3

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/07/21 👋😺Hi grow family!! We're beyond excited to try out this new MarsHydro LED for our latest grow, the SP-3000 is INCREDIBLY bright!! ..I have never seen a light more appropriate for a 4x2 tent in my life, we (happily) replaced 3 "600 watt" blurple LEDs with this single rig ( something we've wanted for a very long time). There should be no issue achieving perfect coverage, corner to corner with this light. Its been years since we've flowered under LED ( and never one of this quality), we're a little bias towards HID/CMH, especially my hubby but I think this might just be the LED that changes our mind! We'll be growing Gelat OG Auto by Seedsman (we've heard amazing things) for our first grow under the SP-3000, all plants in 5gl fabric pots, Promix-B (25% perlite) on a 20/4hr cycle. We're starting with 4 plants but if they become unmanageable, we'll move one or 2 of the plants to another tent. We use a glass of water and a paper towel as our germination method. We soak seeds roughly 24hrs and then in a wet paper towel for another 12-24hrs, we average roughly a 90% success rate doing it this way... Thank you for reading if you made it this far and happy harvests everyone! ❤️💡🌱😽💨 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -No-fan design: the SP-3000 uses an aluminum heatsink, and the driver can be removed then placed outside the tent🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 30 of these lights can be daisy-chained together and controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/10/21 🤘😺 100% germination!! All seedlings have broken the soil today.. I'm so in love with this light!! ❤️💡🌱 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~

Als ich dachte, ich hätte noch Zeit, hab ich mich komplett verschätzt und damit warscheinlich auch den ersten richtigen Growfehler gemacht. Die Pflanze ist viel zu hoch gewachsen ... was meint Ihr? Was kann ich das nächste mal anders machen? 😞

Pretty Much Done

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!guckt euch letzen Report an !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Blüte hat begonnen: Edit:11.05 Die Pflanzen sind innerhalb von 2 Tagen explodiert. Ich habe das Licht nun auf 75 Prozent gestellt und noch einmal Cal-Mag nachgegeben, da die letzte Gabe nur eine halbe war. Die beiden Titan sehen fast identisch aus. Die beiden Epsilon sind circa 3 Tage unterschiedlich, eine ist etwa 5 cm kleiner als die andere und hat noch kaum Blüten. Ich denke, in 3 Tagen wird das der Fall sein. Die Cosmos F1 ist im Umfang circa 50-50 cm, kaum Blüten bisher. Ich hoffe, sie wird nicht noch viel größer, da der Platz langsam eng wird. Ich bin von dem Wachstum dieser Pflanze absolut begeistert. Mal gucken, was die Blüte bringt. Edit ende Ich habe alle Blüten entfernt, die nicht im direkten Licht sind, und alle Blätter, die die Blüten bedecken. Die Pflanzen weisen einen Cal-Mag-Mangel auf, was bei der Blüte normal ist, gerade bei diesem Licht. Ich habe dem Gießwasser etwas Cal-Mag hinzugefügt. Die Pflanzen sind drei Tage älter als im letzten Report. letzte Woche : Die Pflanzen sind seit der Keimung auf diesen Fotos genau 30 Tage alt. Ich habe eine Pflanze ausgetauscht, da es sich um eine Epsilon F1 handelte, die vermutlich Mutationen aufwies. Sie hatte verkümmerte Blätter, die nicht wie die ihrer Artgenossen aussahen, und wuchs deutlich langsamer. Daher habe ich sie nach 2,5 Wochen ausgetauscht. Der kleine Mann(die ausgetauschte Pflanze) leidet natürlich jetzt ein bisschen unter Lichtstress, deswegen werde ich wohl nur eine sehr gestauchte Pflanze erhalten. Aber besser, als die Fläche leer zu lassen. So viel zu dem, was nicht funktioniert hat: Die Sanlight stand die ersten 2 Wochen auf 20 Prozent. Dann habe ich sie teilweise mit dem Dimmer höher gestellt: 2 Stunden auf 25 Prozent. Eine Woche später bin ich auf 30 Prozent und 2 Stunden mit 35 Prozent gegangen. Für Woche 4 habe ich 40 Prozent und 2 Stunden auf 45 Prozent gewählt. Ich erhoffe mir, die Pflanzen so schneller an die starken Lampen zu gewöhnen. Im Nächsten grow soll bei jeder Pflanze die TDS per Infrarot gemessen werden. Da werde ich dann ein Experiment zu machen, wie die Lichtsteigerung am besten umzusetzen ist. Zu den Lampen kann ich bis jetzt nur Positives sagen. Im Gegensatz zur dazugehörigen App, diese ist wirklich nicht sehr gut umgesetzt. Das Menü und die Einstellungen sind teilweise irreführend und nicht sehr durchdacht. Ich muss mir immer wieder die Tutorials in der App ansehen, da diese immer wieder angezeigt werden. Noch dazu hätte ich gerne die Möglichkeit, mehr Einstellungen treffen zu können. Das ist aber Meckern auf hohem Niveau, weil auch die App das macht, was sie soll, nur eben meiner Meinung nach nicht sehr gut umgesetzt. Die Pflanzen wurden von mir mit Klipsen aus dem 3D-Drucker gestützt. Diese Klips kann man Stück für Stück im Winkel verstellen, so dass man die Triebe damit neigen kann. Das habe ich von Tag zu Tag im Winkel verstellt, so dass ich am Ende einen 45-Grad-Winkel habe. Das habe ich insgesamt über 6 Tage gemacht. Die Pflanzen haben an sich ein sehr gleichmäßiges Wachstum. Die Cosmos F1 wächst so optimal, dass kein LST mit den Klipsen nötig ist. Ich habe an den Pflanzen keine Mängel entdecken können und auch keine Anzeichen von Mutationen. Die Pflanzen haben im Durchschnitt eine Höhe von 35 cm, wobei eine etwas stärker abweicht mit 22 cm (wieder eine Epsilon F1). Der Umfang mit LST bei der Cosmos F1 liegt ohne LST bei 20 cm im Durchschnitt, wo wir wieder die Epsilon im Negativen haben mit 14 cm. Die Pflanzen wurden alle entlaubt, das eine Woche vor der Blüte. Morgen werden die Pflanzen erneut entlaubt und ge-lollipoppt. !!!!!!!!!!!!!!!zusätliche infos werden morgen ergänzt + Fotos !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! *1. Foto Mutation: Dieses Foto wurde nur 5 Minuten nach dem Umtopfen der Pflanze aufgenommen. Vorher stand sie in einem größeren Topf, in dem sie genauso aussah. Ich habe sie umgetopft, weil ich den Topf brauchte, aber die Pflanze nicht wegwerfen wollte. Der Pflanze geht es gut, aber sie sieht im Moment etwas mitgenommen aus. Bilder folgen

The honeydew fallout from the spotted lanternflys in the maple tree above have gotten out of hand. It's almost a constant mist. The only thing I could think to do beside moving them like an ancient Egyptian was adding a protective canopy of some sort. I wanted to get the clear poly weave but this green one was half price so went with it instead. With the way I have it oriented, it doesn't really block out that much direct sun too. In the morning and afternoon the angle of the sun is able to shine right on the plants. It's kind of a win win because should decrease my chances of mold later down the road towards harvest time if it does decide to rain a bunch. I tried washing the plants once this week with some light soap and water with a little baking soda mixed in. I rinsed with cone setting with hose right after and the plants were praying next day but i didn't have canopy up yet so they got hit again. I spotted several pale green assassin bugs on my plants so now Im a little nervous about washing the plants again because I want to keep them around. They are nymphs right now I may try to collect the ones i see become cleaning the plants one last time. Hanging that canopy was one of the more frustrating things I've done in a while. I wasn't sure If or how it would work but I has some medium gauge synthetic rope I tied to the eyelets and eventual 4 tree limbs. I had to bounce back and forth to get it tension climbing my fruit trees and 8 foot ladder. I originally disassembled an unused tomato trellis i built to use some of the lumber to build a post to tie off on in one corner but it ended up being at the wrong angle relative to the tarp and I started to get worried if a storm ripped it out of the ground. So I opted to used only the surrounding trees. After getting it all tension I realized that it was to far to one side leaving two of the plants almost exposed, so I had to come back the next day and re adjust but now I have it in a pretty good spot. I survived a decent storm already this week. Just hope it lasts. Overall making outside feel slightly leas stressful and anticipating more of a good harvest rather than just an experiment with my first outdoor grown.

Looks to be some good potent bud. Nice grow hope this updates. My harvest video is on you tube. It wouldn't load. Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.