Check the winners The Grow Awards 2026 🏆
Likes
Comments
Share
@Sadhus
Follow
**Semaine Harvest : Récolte Finale – Sticky Broccoli (28 avril 2026)** **Note :** Fin du cycle Eternity Grow Cup 2. Récolte effectuée en semaine 10 de floraison (légèrement anticipée). Tout le journal de culture est maintenant complet. ### Contexte et Bilan du Cycle Après 10 semaines de floraison (semaine 14 globale), la récolte a été déclenchée suite à un départ de botrytis sur une autre plante du même espace. J’aurais pu laisser encore quelques jours pour laisser mûrir un peu plus les trichomes ambrés, mais la sécurité prime. La plante dominante (150 cm) a donné un beau rendement qualitatif, avec des buds denses, extrêmement frosty et résineux. **Poids frais : environ 780 grammes** (poids humide total des buds trimés, sans les grosses tiges). Mise à jour prévue dans 2 semaines pour le **poids sec final** après un bon curing. ### Observations à la Récolte - **Buds** : Denses et compacts, très collants. Couverture trichomale exceptionnelle (majoritairement laiteux avec quelques têtes ambrées). L’aspect sugar est magnifique, les buds brillent littéralement. - **Odeur** : Très agréable, sucrée, épicée et florale, typique de Sticky Broccoli. Puissante même après le flush. - **Résine** : Extrêmement résineuse au toucher – parfait pour du dry sift ou un petit Ice-o-Lator. - **Structure** : Belle densité globale, même si la taille individuelle des buds reste dans la moyenne haute pour la variété (pas les plus gros que j’ai vus, mais la qualité trichomale compense largement). - **Santé** : Plantes propres jusqu’à la fin, pas de carence visible. Le flush des 3 derniers jours (EC 0,7) a bien aidé à nettoyer les sels. **Clones** : Quelques clones prélevés plusieurs semaines auparavant ont été repiqués avec succès dans leur nouveau système. Ils sont bien enracinés et prêts à repartir pour un prochain cycle de végétation/floraison. La génétique est conservée ! ### Paramètres en Fin de Cycle (semaine 10) - Température jour/nuit : 19-21 °C / 14-15 °C - Humidité : 48-58 % jour / 29-39 % nuit - VPD : 0.9-1.3 kPa - PPFD : 550 (DLI 24) - UV : 90 min/jour - EC final : 1.0 puis flush à 0.7 (Terra Aquatica seul) - pH : 5.8-6.0 - Steering : génératif jusqu’à la fin - 48h de blackout avant récolte : appliqué pour booster la résine et améliorer la qualité des trichomes. ### Plans Post-Récolte - **Séchage** : 7-10 jours à 18-20 °C et 55-60 % d’humidité dans un espace sombre et ventilé. - **Curing** : Minimum 2-3 semaines en bocaux (burping régulier) pour affiner les terpènes et la douceur. Mise à jour dans 2 semaines avec le poids sec final. - **Utilisation** : Une partie en fleurs séchées/cure, et un petit batch pour **dry sift** + **Ice-o-Lator** (bubble hash) histoire de se régaler avec la résine exceptionnelle de cette Sticky Broccoli. **Tips éducatif final : Le flush et le blackout en fin de cycle** - **Flush** (3 derniers jours à EC très bas) : Permet d’éliminer les sels accumulés et améliore nettement le goût final (moins de chimie, plus de terpènes purs). - **48h de blackout** : Technique simple mais efficace qui stress légèrement la plante de manière positive, augmentant la production de résine et la clarté des trichomes juste avant la coupe. Ce fut un très beau cycle, propre et instructif malgré l’interruption due au botrytis. La qualité résineuse et l’odeur compensent largement. Merci à Zamnesia et Plagron pour le matos ! **#GrowLegendary #Zamnesia #Plagron #EternityGrowCup2 #StickyBroccoli** Dans 2 semaines je mettrai à jour avec le poids sec et les premières impressions après curing. **Estimation du poids sec final** Avec **780 grammes de poids frais** (buds humides, après trim initial mais avant séchage complet), voici une estimation réaliste pour cette Sticky Broccoli : ### Estimation raisonnable - **Poids sec attendu** : **180 à 230 grammes** (environ **23-30 %** du poids frais). **Pourquoi cette fourchette ?** - Les buds frais contiennent typiquement 70-80 % d’eau. - Après un bon séchage (jusqu’à 10-12 % d’humidité résiduelle) + curing, il reste généralement **20-30 %** du poids humide initial. - 20 % → **156 g** (estimation basse, si buds très denses ou séchage poussé) - 25 % → **195 g** (estimation moyenne, la plus courante pour des buds compacts comme les tiens) - 30 % → **234 g** (estimation haute, si les buds retiennent un peu plus d’humidité ou sont particulièrement résineux) Tes buds étant décrits comme **denses, très collants et frosty**, je pencherais plutôt vers le **milieu/haut de la fourchette** : **190-220 grammes** une fois bien secs et cured. ### Facteurs qui influenceront le résultat final - **Qualité du séchage** : Température 18-20 °C, humidité 50-60 %, bonne circulation d’air sans vent direct → perte d’eau progressive et uniforme. - **Trim** : Si tu as fait un wet trim assez serré, le poids sec sera un peu plus bas que si tu as laissé plus de sugar leaves. - **Densité des buds** : Plus ils sont compacts et résineux, moins ils perdent de poids relatif (mais ils sèchent parfois un peu plus lentement). - **Curing** : Pendant les 2-4 semaines en bocaux, tu perdras encore un peu d’humidité, mais le poids se stabilisera. ### Prochaines étapes 1. **Séchage** : 7-10 jours jusqu’à ce que les tiges cassent net (pas pliables). 2. **Curing** : Minimum 2 semaines (idéalement 4+) avec burping quotidien au début. 3. **Pesée finale** : Une fois le poids stabilisé (après 2 semaines de curing),
Likes
30
Share
@SkunkyDog
Follow
Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme 🤙 https://seedsmafia.com/de/
Likes
34
Share
Zenzation is fast, very fast, filled and took color quickly and quickly volge at the end. The flowers are full, very full and seem truly succulent, the bassine shape, I spoke many times of the sides that I left then if you want high plants to take advantage of the growboxes in height Make the topping, without LSS and leave only the main line cloning the center. If instead you want a low plant you can leave side that will become very big and do some lst and fimming to keep them low and level them with the center that still weakens. LIGHT >> MARSHYDRO SP3000 AT 100% OF POWER .. TENT >> MARSHYDRO 120x60x180 CHECK IG >> https://www.instagram.com/marshydro_aliexpress2/ Buy >> marshydroled.aliexpress.com TENT >> MARSHYDRO 120x60x180 CHECK IG >> https://www.instagram.com/marshydro_aliexpress2/ Buy >> marshydroled.aliexpress.com
Likes
14
Share
Got a dehumidifier it’s reading different from what mine controller 69 is saying but I have it set at 40% it’s the lowest so it’s going pull humidity regardless right now it’s about 53% which is okay would like it to get down to the 40’s I also changed the light schedule today to 20/4 the humidity raises at in my tent when lights are out so I figured change it to 20/4 instead of the 18/6 I’ve been running so if humidity does go over it won’t be for as long as before hopefully this works just trying to avoid any mold situation So far the Amneisa Haze 2 is at stretching she’s going be big I can but the haze 2 is done seems to just be flowering the sour diesel is looking good as well so far I’m happy with its looking like left town for two days and the auto watering pots worked!
Likes
14
Share
@Lazuli
Follow
Week 15 still white pistils some turn brown cant wait to cut it down Fed ripen for 2 days now
Likes
11
Share
@PanGrower
Follow
Do not pay attention to the temperature on the thermometer in the middle, it lies by a couple of degrees. I have a good thermometer on top of the box that shows the temperature. Day 29: After a terrible fracture, we see that the plant is beginning to recover. I'm honestly disappointed because it makes it very difficult for me to train mainlining and it will also increase the amount of time it takes to grow. Day 30: It looks much better already, I could superprune the right branch, but I don't want to stress it. I will try to bend the right branch harder, I will bend the left one a little in the morning the next day, maybe early. Day 31: This morning I cut the lower leaves, photo in the evening and continued the LST training after the injury. Photo in the evening. Day 32: I am completely sure that the plant has moved away from the stress, but we can see on the left circle, the right bud (and side) slowed growth. Day 34: I saw traces of salt on the tips of the new leaves, so now I pour water with regular 15 PPM.
Likes
25
Share
@OZDAOgrow
Follow
So, I ran out of Bloom from Athena 🤦🏻‍♂️, it's a pity I didn't throw out those two jerk bushes earlier, so it would have been enough fertilizer until the end of the cycle. I had to switch to Grow 😂 It has 2% nitrogen, I hope it won't affect the bushes too much. Soon I'll cut one, the oldest one, I'll do a little rinsing and put it under the knife. I think the others need a couple more weeks to stand.
Likes
28
Share
Welcome to week 5 of flower. Trichome production and the density of the buds is really starting to accelerate. My dehumidifier is not stable, so VPD ranges from 1.2-1.4. I lightly defoliated 31/10 and last watering was 6/11 👽👉7/11 The day after watering and the day my timer messed up my 12/12 schedule. But hope it brings no problems. I defoliated lightly and only removed most under the SCROG line. Even a couple of underdevoloped branches that stretched below SCROG-net got cut. 👽👉8/11 Their smell is starting to get more extreme. 👽👉9/11 I removed a bit of the bottom foliage and cleaned up the dead leaves. It has been really tight around the SCROG net, so it was highly needed for airflow and humidity 👽👉10/11 Waterday* ml/L change from last watering - to this. BioHeaven 4 > 4 BioGrow 4 > 2 BioBloom 3.5 > 4 TopMax 1.5 > 4 Calmag 0.5 > 0 Rootjuice 1 > 0.5 👽👉11/11 Amazing growth in thickness and they look alot more frosty today! 👽👉12/11 Same story as yesterday 👽👉13/11 Today should have been waterday, however i was missing some nutrients so postponed till tomorrow 👇_____________________________________________ Flowering feeding recommendations: Early bloom: 5:7:10 Mid-bloom: 6:10:15 Mid–late bloom: 4:7:10 BioHeaven The NPK ratio is 0.91-0.18-0.24; BioGrow The NPK ratio is 4-3-6. BioBloom The NPK ratio is 2-7-4; Topmax The NPK ratio is 0.1-0.001-0.1; Rootjuice The NPK ratio is 0.1-0.1-0.1; 👆_____________________________________________
Processing
Likes
142
Share
Hi everyone 🤗 This week it looked more and more astonishing after opening the box a wonderful sweet smell wafts through the room 👍. A few days ago the Blue Cheese Phenotype 1 was harvested and placed in the dark room :-). This week both Kosher Tangie Kush phenotypes will be harvested 👍. Next week the Blue Cheese phenotypes 1 and 2 will be harvested ;-) everyone else needs a while 😀. I wish you all a nice week, stay healthy 🙏🏻 and let it grow 🌱👍
Likes
8
Share
@Wasoh
Follow
Crecen fuertes. Detecte una mosca blanca :c
Likes
12
Share
Another mostly positive week completed. Pests firmly at bay. Environment humidity looking good and all the buds are getting bigger. Top dressed some nutrients / insect frass earlier in the week which I’m sure was a week or so late. - Heidi looking very hungry by D57 - the whole plant is looking yellow. Solution to problem is some organic liquid nutes which arrived today from now as needed. Overall they and the other 2 ladies in the tent are looking a zillion times better than my first grow. Starting to feel the harvest impatience kick in. Will try to overcome this time Thanks for reading have a great week 😊
Likes
18
Share
Hey everyone ☺️. It gets more beautiful from week to week 😍👍. I have them all this week Sprayed again properly with neem oil in the veggie phase ☺️. There have been no trips for 2 weeks, but prevention is better 😀. Because of the neem oil, the plants look very dark and shiny, which I really like when they shimmer like that 😝. I didn't do any training these days, that will be done again the next few days 👌. it was watered twice this week with around 0.6 l per plant. The Ph / Ec measuring device was also recalibrated. Otherwise there is nothing to report for this week and we'll see you again with the next update ☺️👍. I wish you and your families a Merry Christmas 😊. Stay healthy and let it grow 🍀 You can buy this Strain at : https://sweetseeds.es/de/red-mandarine-f1-fast-version/ Type: Red Mandarine F1 Fast Version ☝️🏼 Genetics: Red Poison Auto®️ (SWS39) X Tangie (California Orange x Hybrid Skunk) 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
14
Share
Buongiorno amici della CampaCavallo 💚💅🏻🔥😍 ... In questo week (8.3.23),il team di disinfestazione CampaCavallo si è dato da fare per salvare il salvabile dai maledetti spider mites 🕸️... Ringrazio molto @MiyaguyOKPolilla per i consigli BIO che mi ha dato, ma purtroppo non avendo a disposizione ne chiodi di garofano, ne bastoncini di cannella, mi sono dovuto arrangiare con la canna dell'acqua💦💦💦 Abbiamo preso ogni pianta, portata all esterno della grow box, e con un bel getto d acqua abbiamo letteralmente spruzzato energicamente le piccole... Tutto perché il merda di spider mites odia l acqua👍🏽 abbiamo anche rimosso le grandi foglie compromesse o troppo infestate.... Speriamo di non averle stressate troppo.... Ma é stato fatto tutto per il loro/nostro bene💚🙏🏼👍🏽 ... Abbiamo anche trattato la grow box con una miscela di acqua e candeggina per disinfettare come si deve🚑 Le foto mostrano il risultato. Ci piacerebbe molto sapere cosa ne pensate... Consigli, critiche... State sintonizzati 👍🏽💚💯👌 BUONA SPANNABIS 2023 A TUTTI I GROWER 👏🏽💚💅🏻🔥😍💯👯‍♀️
Likes
6
Share
Questa runtz continua a crescere in altezza,. Oggi lunedì 22 dic. L'ho dovuta ripiegare ancora.. gli ho fatto un altro HST sennò passa i 2 metri di altezza 😉🤣😂😘
Likes
15
Share
@Verbalist
Follow
📆 12/7 - Start of the 5th week! - Whole lot pistils sticking from the nodes & plant is taking noticeable grow spurts. Pre-flowering/stretch phase is about to start. - 12/5 Changed the reservoir water and made a new N&K boosted patch: - 0.95ml/l Micro & Bloom - 1.75ml/l Grow - 1.9ml/l Terpinator - 1.2ml/l Fulvic/Diamond Nectar - 0.5ml/l Hydroguard * Beneficials and some bloom boosters included — Ending EC: 1.6 / TDS: 810ppm — pH adjusted down to 5.6 (letting drift up to 6.2 for full pH scale absorption) 12/6-12/7 overnight water level dropped & she drank like 1.5L / topped with weak nute solution. 📆 12/8 started a Negative DIF testing. DIF meaning difference between day and night temp. Usually DIF is positive when day temperature is greater than night, which is naturally. But by manipulating your DIF in negative (Warmer night temps than day temp) we do reduce 30% of stem elongation AKA stretch. — Negative DIF in hydro growing can greatly impact in yields if the stretch being controlled right way. • 12/9 - 2nd uppest new shoot length: 3cm / 1.2" (new measurement @ 12/10 night) 📆 12/9 - Topped res with 3ml Terpinator, 1ml Bloom & 1ml HG. - EC topped to 1.8 (1.6 was starting)
Likes
7
Share
It’s pretty cool to see how a plant can grow so fast! My nephew told me this could really be therapeutic for me so far so good! I’m new to all of this and I’m starting to want to learn more I have about 9 more seeds left all auto. Photos kind of have me intimidated with all of the videos I’ve seen on YouTube…if you have any advice on them please send it my way. I want to know more about photoperiods. -Uncle Cabbage
Likes
25
Share
week intel: im felling in love with them everything is good . this week was time of second net layer , the first layer was for spreading the branches and doing LST now the second layer is for supporting branches for later weeks when the buds gain weight and gets heavy the net will hold branch stand up without benting. stresses: im just gonna cause a little E.C stress to raise the terpens. i found their max tolerance is 1.9 E.C so im not gonna reach or get close to that amount again and beside this wont cause any more streses untill week 6 that will do second pruning and we are done with trainings then. feeding: as always im feeding plants 3 times per week with nutrients , no plain water at all, just with nutrients with adjusted p.h at this order : day 1 : i feed them heavy with silicate +base nutrients(calcium & micros + Bloom) and karbo about 950 ppm - 1.8 e.c to cause a little e.c stress. day 3 : i feed them low dose for start of Green House Feeding Booster around 267 ppm - 0.6 e.c alone cuz this bad boy is very strong. day 5 : i feed them with medium dose of Top-Max around 160 ppm - 0.3 e.c to let them recover the stresses and eat the previous nutrients untill next feed at next week and the next 2 days will rest and eat :D just remember never feed them plain water besides the first week of germination always feed water with nutrients to feed them right p.h every time and to avoid excess water problems, and let them eat the previous meal for 24 hours and dry the soil, so at total only feeding nutrients 3 times a week other days let them dry and rest