Sie

Beautiful colas all over. Since flip growth has been super sayin..

Smell is amazing like fizzy pineapples it overpowers the cookie dawg smell but the combo of the strains is also amazing the slight cookie and chem smell inside the tent. Will re pot these all and hope they all females due to the seeds being regular and not feminised. All looks good will keep eye on pistils to appear or not. I am always using the same feed: Coco A Coco B Canna Rhizotonic Cannazym Canna cal mag Canna boost Ph up

Overall it was quite an easy grow, but one of the seeds had some kind of genetic disease so it looked very different to the rest and produced the least in the end. Alpha: 16g Bravo: 27g Charlie: 19g Delta: 19g Echo: 33g Total dry: 114g It was very clear from the beginning of how Echo was trained that it will yield the most in the end. I need to try to replicate that during the next grows 😁 But overall this strain was very quick and produced extreeemely dense buds 😍

Went from lights out for 3 days started to bloom the clones then had to get them right and we'll here we go again lost 5 but welcome to the north east ✌️

Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚

this week is a bit frustrating im having some small issue with root rot im off to the store to buy some drip clean from house and garden and ill be doing a water change today i will also topped them after fourth set of leaves day 7 system flush and cleaned. adjusted ppm to 750 i will be using sterile rez from now on as i dont want to battle with pythium. added drip clean and peroxide 30% as suggested by my local hydro store now water looks pristine onto week 5 tomorow.

Es sind sehr viele Triebe zu sehen sie fängt an sich schön zu entwickeln zeigt ihre Fäden und sieht sehr grün aus ich bin sehr gespannt wie die buds aussehen kannst garnicht abwarten

Some night time pics,enjoying their rest mode.Suns been great the past few days.Growing bigger by the day

One more week to catch up on

2000 ml alle 2 Tage PH-Wert: 6,1 EC-Wert: 1,1 Temperatur: 22ºC Luftfeuchtigkeit 62% Schädlingsbekämpfung: Nematoden PPFD: 500 µmol/m²/s DLI: 33 Düngemittel: Mineralischer Dünger 3,5-6-6 Besonderheiten: Wurden direkt in die erde gepflanzt in einer Kokos-Quelltabletten. -Tag 65 Heute haben wir sie mit 2000 ml Wasser gegossen, versetzt mit 1,5 ml Calmag, 5 ml Canna PK 13/14, 1 ml Plagron Green Sensation und 1 ml Plagron Power Buds. Der EC-Wert lag bei 1.430 mS/cm und der pH-Wert bei 6,2 -Tag 67 Heute haben wir sie mit 2000 ml Wasser gegossen, angereichert mit 1,5 ml Calmag, 6,5 ml Canna PK 13/14, 1 ml HY-PRO Epic Blast sowie 0,32 ml HY-PRO Generator. Der EC-Wert betrug 1,540 mS/cm und der pH-Wert lag bei 6,2. -Tag 69 da sie nicht so gut aussieht haben wir bei ihr der PH kontrolliert und der liegt bei 7 was nicht so gut ist, der EC-Wert lag bei 1330 wir haben ihr Wasser mit einem PH wert von 5,8 und Mikroorgansimen gegeben.

Start week 8. change Atami B´cuzz Bloom Stimulator for Plagron Green Sensation. 🍡🍭🍬

The plant is thriving in its fourth week of the 12/12 light cycle. Watering with CalMag and pH Down. I also gave it one extra feeding of 5 liters with Simplex PK Boost (1 ml/L). The hydroponic plant is about twice as wide—it has completely filled the 40x40 cm grow box. The fan leaves are nearly the size of a palm, and the foliage is dense. The day before yesterday, it shed four lower fan leaves on its own. It seems 40W of light is becoming insufficient. I’ve added Hesi Boost and Hesi PK to the nutrient solution, following the chart dosages. Every day, I top up with 1 liter of water containing CalMag and pH Down. I’m thinking about setting up an automated watering pump to run once a day. I’ve noticed the pH dropping to 5.5 daily; adding 1 ml/L of SillicX and a liter of filtered water brings it back to the 6.0–6.2 range. By the next day, however, it tends to drop to 5.5 or lower. It might be time to completely replace the nutrient solution.

And finally, it’s harvest time! What can I say? This is a strain I’ll definitely try growing again, maybe using topping and growing it organically. The terpenes are spectacular, in my opinion—apricot with a hint of that musky-minty note typical of Gorilla. Despite my mistakes with the nutrients, it still turned out amazing. I recommend it to anyone who loves fruity terpenes. It’s wonderful!

10/24/18-Pre-Bloom week. 16hr light schedule. 12/12 willl be next week.

Perfectly easy grow.

Another week down, smooth… mostly. I wasn’t ready for how savage these autos would get. Not “plant problems” just pure speed. One Hyperion got out of hand and is now over 100cm, basically taking up half the tent. Sounds like a win… until you remember there are 3 other plants in here and height is limited. Every time I think she’s done stretching, she’s somehow closer to the light again. Like she’s trying to merge with the fixture. To manage it, I hung a small plastic “shade” right above the tallest top to bring intensity back into a sane range. It was reading around 90k lux at the tip, now it’s closer to 56k in that hot spot. Overall the girls are happy. The one that started flowering first is setting big expectations — the leaves around the buds are already frosting up with trichomes, and I’ve honestly never seen that much this early. Hope she keeps that energy and the others follow. The only “plot twist”: the one still lagging behind is the Ranz. While everyone else is walking into flower, Ranz is still stretching like “nah, I’m good, I’ll clock in later.” Since they all share the same drip system + one reservoir, it slightly annoys the control freak in me I can’t dial the feed perfectly when one plant is on a different chapter than the rest. Fingers crossed she finishes the stretch soon and joins the flower party. Good luck to all growers and see you next week!