Check the winners The Grow Awards 2026 🏆
Likes
Comments
Share
A couple days early because I have to leave town for a few days. I adjusted nutrients and added CaMg for the rest of the run. Came out to 450ppm, PH 6.3
Likes
2
Share
@Reskap
Follow
J’ai fait un peu de lst et de défoliation. J’ai des mouches de terreaux j’ai donc ajouter des pièges collant jaunes. Mes plantes sont tout de même petites quand je compare à d’autres journaux mais c’est la première fois. D’ailleurs si vous avez des conseils pour faire mieux je suis preneur
Likes
45
Share
I am happy with the outcome of this grow. This was my first time growing autoflowers and ILGM genetics. Total wet weight was 1301 grams Total dry weight 8.5 oz These plants are very hardy and grow tall very quickly with the tallest plant reaching 4 ft tall. Each plant grew very different bud structures which resulted in some very dense and very fluffy buds. If you are looking for a very uniform growing plant with dense buds you may need to look for another strain. The smell from these buds are strong and amazing. I would describe the smell as fruity glue with rubber. I am overall very pleased with how this grow went and I cant wait to grow some more!
Likes
6
Share
@Rinna
Follow
Looking okay, the highest leaves are burning quite a lot, but I’m not worried a lot as the buds are forming nicely. I’ll be feeding a little less from now on as she doesn’t seem to need a full dose every watering.
Likes
35
Share
[Day 50] 12/18/21 - filled 13 gallon reservoir with 7.5 ph well water adjusted to 6.4
Likes
2
Share
🗓️ Day - 23 ⏰ Hour - 8:20 am 🌬️Air Temp. - 77 💦Humidity - %68 ⛽️ TDC (ppm) - 780 ⚱️Reservoir Tmp. - 75 PH - 5.6 📝 Notes - at 8 pm added 2 gallons of tap water to bring down ppm (from 830 to 690) and to raise PH (from 5.6 to 5.8). 🗓️ Day - 24 ⏰ Hour - 8:30 am / 10:00 pm 🌬️Air Temp. - 76 💦Humidity - %64 / 52 ⛽️ TDC (ppm) - 710 / 490 ⚱️Reservoir Tmp. - 73 / 74 PH - 5.8 / 6.0 📝 Notes - Complete clean up of reservoir. Rinse and washed with hydrogen peroxide and tap water. The system was rinse until achieved a ppm of 100 with clean water before adding new water and nutrients. Feed 12 gallons of tap water with 1/4 Flora pro-series RDWC week #3 vegetation. 🌿 Daisy - She was cloned today. 4 Clones were taken from upper area. 2nd and 3rd node from top to bottom. Each around 2”-3”. Couple fan leaves were also removed. 🗓️ Day - 25 ⏰ Hour - 8:00 am / 11:10 pm 🌬️Air Temp. - 76 / 77 💦Humidity - %60 / 57 ⛽️ TDC (ppm) - 500 / 530 ⚱️Reservoir Tmp. - 76 / 72 PH - 6.1 / 6.1 📝 Notes - 3 ml of PH down were added to reservoir because PH was on 6.2 by 5 pm. 🌿Daisy - Removed two extra large fan leaves that were casting shadows over the exposed steam area. She still looks stressed . 🗓️ Day - 26 ⏰ Hour - 9:00 am / 11:30 pm 🌬️Air Temp. - 76 / 76 💦Humidity - % 60 / 52 ⛽️ TDC (ppm) - 540 / 570 ⚱️Reservoir Tmp. - 72 / 73 PH - 6.1 / 6.1 📝 Notes - The ppm levels are rising. They reached 560 by 6:00 pm. 🌿 Daisy : Still recovering, bouncing back. 🗓️ Day - 27 ⏰ Hour - 9:45 am / 🌬️Air Temp. - 76 / 💦Humidity - % 65 / ⛽️ TDC (ppm) - 580 / ⚱️Reservoir Tmp. - 73 / PH - 6.1 / 📝 Notes - The ppm reached 580 by 9:00 am. Reached 600 at 3:00 pm. 🌿 Daisy looks better. Leaves starting to lift again so I I went ahead and did some extra pruning and cleaning. 🗓️ Day - 28 ⏰ Hour - 8:30 am / 10:00 pm 🌬️Air Temp. - 74 / 77 💦Humidity - % 50 / 54 ⛽️ TDC (ppm) - 630 / 650 ⚱️Reservoir Tmp. - 73 / 72 PH - 6.1 / 6.1 📝 Notes - The ppm levels keep rising. 🌿 Daisy: Looks perky and happy after pruning. She’s is recovering very well. Her root system is showing new white roots so seams she’s liking the higher TDC levels.
Likes
14
Share
@Kdog27
Follow
Let’s see what the future holds for these lady’s
Likes
6
Share
@Rangaku
Follow
Wow , week 3 of flower and she’s in full thc mode . Crystals covering pistalls, smell is sweet and skunky . This plant is so thick and hearty the leaves are so thick . I’m expecting this biscotti vanilla by Dutchfem to be really special from what she’s showing early on
Likes
2
Share
cut on the 41st day from the first flower. it resisted 99% humidity without water or light for a week. it went into overfertilization 3 times up to 2.8 of ec the plant reacts great above this data the plant stops. I used Biobizz organic products not following the table. The plant was never drained until harvesting, by watering with little water and rich in salts the run off was 8.4 brought to 1.9 as the final harvesting figure. the plant smells like big babol, smoking it fresh incense flavor hits the nose like monk and strawberry candies
Likes
48
Share
Took of the humidity dome sooner than I wanted. I swear it makes em stretch. Also turned up the light! Got get the RH up a bit but these babies are up outta the ground and doing their thing! This will be the first grow that I try to water according to the plant and NOT a schedule, therefore prob wont be watering much this week! __________________________________________ Not much to see, but not much to worry about! Gave em a little water just to get the top layer wet. Being much more patient and calm with these seedlings. 2 of them did stretch more than my liking but it shouldn't matter at all soon.
Likes
6
Share
@Roberts
Follow
I am starting a Grape Octane Auto. I have scuffed the seed on both ends. I have placed the seed into water and will plant it in the rock wool. Thank you ILGM, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.
Likes
12
Share
@Pedro_88
Follow
Estoy muy satisfecho con el crecimiento de mi chemical bride, ayer hubo un fuerte viento y tumbo a mí watermelon skittlez no la pude encontrar, pero ya tenemos otra en proceso que verán en estos días
Likes
2
Share
Set up an evaporative cooler to act as an intake and to cool the temp through evaporation. It I was able to get the average temperature down to an average of 77°. Relative Humidity increased to an average of 55%. ~~~~~~~~~~~~~~~~~~~~~~ Evaporative Cooler: The evaporative cooler was way bigger than I thought and blowing all the air into the tent would be overkill and would throw off my ventilation given that I only have a 4inch exhaust fan blowing air out. So I had to rig an air duct onto the front to channel some, but not all, of the air coming from the evaporative cooler. I cut a hole in a plastic brownie box and zip tied right angle plate that I had leftover from an ikea furniture. Then I put velcro tape to easily attach and remove the air duct from the cooler for future maintentance and cleaning. I left the room where my tent is closed one day and the humidity went up to 84% which also increased the temperature to 90° but I found that simply leaving the room door open gives the cooler enough air circulation in order to function properly and averaged out at 55% RH and 77° F. ~~~~~~~~~~~~~~~~~~~~~~ Defoliated some ugly fan leaves that were shading a lot of lower buds.
Likes
28
Share
So far plain sailing, I raised the light as I was riding it a bit close and in a weeks time I will defoliate for the last time and remove any unwanted growth from the bottom.
Likes
6
Share
@Chucky324
Follow
This is the end of week 10 and the beginning of week 11 of veg. About another month of veg for these girls, before going into flowering near the end of May. The plants are healthy and doing good. They are just getting rainwater for now. There's lots of compost in the pots for them to feed from. they just need to get their roots into it. OK. Be Great. Chuck.
Likes
17
Share
@Lazuli
Follow
Final week shes getting flushed with cold rainwater and will finish in a cold room to get the fade dark