Likes
Comments
Share
Hi liebe Community and Welcome Back! 💚🌱 Nach der vierten Blütewoche entwickelt sich die Aficianado Pflanze sensationell! Sie ist in diesem Run definitiv die Beautyqueen. Die Struktur, die Buddichte, Interniodenabstände alles perfekt! ? Es scheint auch als würde sie eine Top Blütenperformance hinlegen. Die Trichome sprießen und dass Icing zieht sich wunderbar über die Sugarleafes. Langsam entwickelt sich ein süßliches etwas fruchtiges Aroma. Das Problem mit dem Lichtstress hat sich nun relativiert und die Pflanze hat sich wunderbar erholt. In dieser Woche hat sie einen Bio Tabs PK Booster Komposttee erhalten. Jetzt kann sie nochmal richtig Gas geben. Die Umgebungsgegebenheiten sind aktuell gut für die Endblüte, aber die Pflanze hat sich angepasst: ————— 🌞 Temp: 27 🌚 Temp: 18°C bis 19°C 💨 RH: 49% VPD: 1,42 kPa 🏜️ 💡ppfd: 830 mpm ————— Viele Grüße 👋
Likes
81
Share
Ok so this week I did a defoliation and a tigh down too the netting , I really was not planning on doing such a big defoliation but the leafs became thick and dense and there was almost no light penitration down too the lower branches of the plant , so she is opened right up now and the humidity and temperature has dropped loads and the air is moving alot better around the leaves and branches , I will not take anything more off her now , I have also added Cal mag too the nutrients for this week only , I am very happy with them so far and being new too all this it's all very exciting , Thanks for looking :)
Likes
14
Share
Likes
7
Share
@hooolian
Follow
12/11/2021 - held in a glass of filtered water for 24 hours and then used the paper towel method for 48 hours. Seeds planted today in 6 litre pots to germinate before being moved to 15 litre pots on week 3 of veg. high humidity this week - 70% - and 100ml of filtered water every other day. 16/11/21 - all 9 have broken the soil and are stretching slightly to the light 20/11/21 root juice
Likes
10
Share
@BodyByVio
Follow
This week I Supercrop all the plants and spred them out over both lights. One more week of Veg and they are ready to explode Check me out on Instagram @growmorestressless
Likes
54
Share
This was my first time with any of this so I messed up a bit by drowning the seeds in the beginning.. thankfully I caught it in time and raised them closer to the top of soil. The next day I started seeing my little girls sprouting. It’s now day 5 and they are looking pretty healthy .... I think? Let me know if you see anything I could improve on!!
Likes
40
Share
@BudXs
Follow
Bruce Banner is turning into the Hulk!!!!!!!!! Holy shit, what a strain. This will be a massive harvest on some very large buds. The frost is here and the bloom booster is in the daily fertigation regiment. Looking for these things to really fatten this week. Smell is strong and earthy so far, just the way I like it. Check out Med in Tropic growing the fast version of this strain outdoors in the Amazon
Likes
567
Share
MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND REACH FOR THE STARS WITH MARS🤘🤣. https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA So it's been 17 days under the new MARS HYDRO FC4800 and the TSW2000 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. Its the NEW blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I'm in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. I CANT BELIEVE the amount of crystals the plants have already🤘 they just started getting bigger hair clumps and I didn't expect to see this much already👍 awesome lights do an awesome job. So it's looking good for these strains I made👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll Instagram: @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll Instagram: @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll Instagram: @marshydropenny Happy growing to all my friends 🤜🤛
Processing
Likes
4
Share
Chugging right along were getting some stinky sticky ass buds. They smell my whole basement up of sweet citrusy with some skunks undertones(probably my photos that are also in bud but I dunno for sure) the buds are getting thicker daily and I mean daily doubling pretty well. I've never seen such a thing. I included the 4 photos I have that are also a month in to bud for a kind of comparison. The multi top frosty ass indica is the farthest along of the photos at 32days. I started them just before the autos went in. The other 3 are more sativa than frosty. They are all experimental to me so please excuse the way they are. I have been playing doctor since I bought this tent. Trying different things to see what works what doesn't what i am and am not capable of.Anyway I'm gonna start some Northern Lights x Big Bud Auto sometime after these 2 Short Riders get hung and i pull the indica . Ill keep a diary of it in case anyone starts following my adventures. Anyways I'm late with this one so enjoy my ramblings and my pics of my girls.
Likes
42
Share
@Siriuz
Follow
Finally got my blue dream from seedsman. Winner of the contest seeds of knowledge Here it is finally growing this beautiful lady I gotta say this one was almost broken, it arrived very well but since it was hidden as requested when I open the box with a razor to take out the seeds Packs my bad accidentally cut a tiny side of the seed Shell which I noticed and place into germination and now she is here with us and we are very happy to welcome her to our family Day 1 Tuesday Place into germination Fully at dark until next morning from 8AM Started to get light since she is a photoperiod At the end of the Day went and hid it in a box very well so its dark Day 2 Same process took her out and start again sunny Day for her indoors of course Day 3 Thursday finally got her showing its cotyledons doing the same process :3 And im guessing it goes with the sun At the end of the Day got to give her enough darkness she is a feminized seeds which I have to make her flower after idk some time so I will try and see how much she can grow and get STRESS for yield and potency, thanks a lot for your support Happy Friday btw 👽🌱 **** DAY 5 My girl is a monster and needs to recover Taproot was coming out of peatmoss and I didnt even notice so had to transplant to a Bigger pot soon, since she is not an auto she is way too fast cuz taproot was out in the bottom so I had to take the net out of the Peat moss so roots van expand comfortably but accidentally broke the tiny edge while sliding with lil to no pressure and it sucks but it was stuck and it was either that or just plant it like that but well probably I should have left her be but anyways she is young I think she will develop more since she is in a better soil mix now than just Peat moss, wish me luck cuz I really hope she is better and gets to grow huge, we will see at the process right This is whats all about Lets do our best tho We will! Enjoy & happy growing everyone ☺️
Likes
23
Share
Hi, everybody. RussianGrower Is Back. So it's time to prepare the plants for the guerrilla cultivation of the outdor 😎 We have prepared the following plants: 2 PCs Gorilla Glue Auto 4 PCs Dark Devil Auto 5 PCs Bubblelicious Auto 6 PCs Auto AK 47
Likes
18
Share
Both girls booming into flower now loving life 🌱 one shorted than the other but flipped so all running along side 💚 Now added images of strip went heavy with them tbh but on we plod 🤞
Likes
28
Share
@Bongman
Follow
Into week three of flowering: - Need to up CalMg this week cause all my last grows with this strain the plants were stressing and showing signs of Mg deficiency I think. - The buds are stacking up pretty tight. - The top of the plant is showing some red veins AGAIN, don't know if it is genetics? Or is it too much light? ANY SUGGESTIONS? - Usually what happens is that after week three top of plant will show red veins and some leaves will turn light green yellow. What type of deficiency is this? Thanks in advance for the help. Happy growing, BM 4TwenTee *****Update on LIGHT STRESS:***** Okay I think I got this figured out. Since my plant is showing the following symptoms: - Slow yellowing of top of cannopy - Fan leaves pointing up in a steep angle - Leaves are tacoing up a bit with sharp pointy serrated leaves pointing up - Veins are turning purple and some leaves are showing green veins and yellowing of outer part of the leaf REASONS FOR THE SYMPTOMS: - Since the light is too close to the top of the canopy, although my light is running at around 60% and it is at least a meter away from the light. I think because this was a mother and basically she is accustomed to top canopy PAR of around 180-220 and she was measuring around 600PAR so that is just too much for the plant to handle. So I've lowered the light output so the top canopy is around 420 PAR. - Also my humidity is pretty high at around 72% so I lowered it to around 65% - The reason why the leaves are tacoing up to the light is because the canopy cannot take the high PAR, the temp at the top of the canopy is only 76F so that is acceptable, but the plant is trying the sweat due to the high PAR, but because the humidity was also too high it was not sweating as much as it should. - The reason why a light stressed plant shows different deficiencies eg. magnesium and phosphate is due to the "extra sweating" that takes place, cannabis plants don't choose what they intake, if they need more water to sweat, extra nutrients will be absorbed and this will lockout some of the other nutrients in the solution. **End of week update: Tried multiple changes but still no luck on getting rid of red leaf stem. - Added a 1 hour sunrise and sundown light regiment - Decreased Humidity to 65% from low 70's - Top of canopy PAR decreased from 600 to 350. Leaves red stems still not going away and top of canopy still trying to get rid of moisture with fan leaves pointing up. If anyone can chime in that would be great thanks.
Likes
27
Share
Performed the "back building" technique this week to help bulk up the top cola. Watering the soil when dry, and defoliating the dry-dying fan leaves.
Likes
9
Share
@Delisi
Follow
Неделя прошла хорошо, кроме того что сломался вентилятор, из-за этого немного подскочила температура. Куст начинает цвести, уже выпустил стигмы
Likes
4
Share
01/08 day 1 of flower for these girls did one last aggressive tick and defoliation of canopy this morning now time to let em rock out raised vpd to 1.2 raised ppfd to 750-800