preflower now. but branches not really growing out. 2 LST 1 NT. NOT REALLY BIG PLANTS FOR ME. PERHAPS NOT OPTIMAL CONDITIONS IN MY YARD.

Waiting……..

When you open the tent now,there are all Kinds of terps and colors that coming towards you. Just absolutely beautyful! 1.Rainbow Melon 2.Papaya Sherbert 3.Gorilla Melon

EDIT: I've added some pics and video of my negative pressure setup to ensure no smells in my little 8x8 office! In fact, this room has the freshest smelling air in the house because it's constantly filtered XD This is what hospitals do when they quarantine people -- they put you in a negative flow room so any drafts you feel under the door, from the ceiling and windows, microscopic holes in the room, etc are going INTO the room, and exhaust is controlled through some decontamination method (I'm unfamiliar with that part of it). This week was a huge struggle with the clones. Self-inflicted. I was going to keep them in the buckets for a while, but when I watered them mid-diary-week pot A was not draining even though it has some decent drain holes and rocks on the bottom. I tried digging out the sides down to the bottom to try to open it up, I tried mashing on the sides and bottom of the pot to break stuff up... But it just would not stop being a pool of standing water :( So, I had to do an emergency transplant into the new perlite hempy bucket. Now other than a washed out soil/root plug about the size of my fist, I'm hydro in 100% perlite. (Manual Hydro though, I am the pump! :P) Been giving it MaxiGro since, and I think it actually really loves being in the perlite :O After having such success with the transplant for A, I decided to transplant B right after just because. But, I didn't cut one of the LST strings all the way :facepalm: When I went to lift it out I didn't get very far at all and the main stem snapped off, leaving only one fan leaf and some tiny growth! I figured since it has a healthy root system, it'd eventually recover / stabilize. So I did one of those "whistle while sweeping it under the rug" things, and just put it back the way it was. I've noticed a bit of growth today on official end of week clone servicing day, so I went ahead and transplanted B into a hydro bucket too! Gave it 2-7-7 cactus food and a splash of CaliMagic, the higher P and K of the cactus food should help it recover faster (or so I've read). We'll see how this goes moving forward. Even if it's a flop, it'll at least be a learning experience. I've moved plenty of plants from pot to pot, but never from grow medium to grow medium -- which is actually quite stressful and dangerous to the plant if you don't do it perfectly with all the precautions in place (like using gloves so you don't touch the roots!) I'm excited at the prospect of not having to screw around with soil any more. I can just rinse and sterilize (will use steam most likely) the perlite and it's good to go for the next grow! A shout out to someone I met on here that has been patiently answering all my questions regarding the hempy buckets, perlite, hydro nutrients, etc. I don't want to reference them by name because I don't want to risk causing them to receive a flood of questions from a bunch of random people.

Hello. This is the end of week 2 and the beginning of week 3 of flowering. These girls sure stretched this week. Wow. I see 1 top about 10 inches from the top of the tent. That one branch might get super cropped if it keeps going up. Near the end of this week I want to get in here and do a final trim/prune. Paying attention to fan leaves that don't get enough light on the bottom and fan leaves that block light on the top. If you have a big plant try to leave 4 to 8 fanleaves at the end of each branch, with 8 on the lower branches and 4 on the smaller upper branches. I will also have a good look at the small branches to see if they are sucker branches or if they will put out a small bud. I know that I will put the plant into shock for a few days with the trim/pruning, but when the plant heals and starts to grow again it will go right into resin production, full speed. I will, generally not touch the plants till the end after that. I might take a few fanleaves off that block the light and I'll take off any yellow or dyeing leaves from the bottom too. Came into the tent a couple of days ago to water the plants and saw that the fan blade had disintegrated in it's cage, but it spewed out small bits of plastic all over the plants closest to them. About 5 weeks ago my other fan stopped working in the same place. Not enough lube I'm guessing. so I went and got that blade and it fit. So I didn't have to buy a new fan. 😃 I've got to get in here and vacuum that up before the resin starts flowing. Don't need small bits of plastic in my resin. 😝 See which fan blow up in the video. Oh yes, I also had to replace a automatic opening roof vent this week. It hardly opened a inch on a hot day. I bought one off Amazon, it was here in 3 days, and it works great. Ok. See ya next week. Be Cool! Chuck.

03/23/2024- Yoooo gang update!!!!! =============================== =============================== SOOO what's brackin gang!?! Did some training and increased light to canopy intensity and man did she really take off! So I'm using frozen water bottles of various sizes to make sure the water in the tank stays cold, trying to keep it between 60 and 66 Fahrenheit so it's not gunna develop unwanted issues t That comes with warm Temps in a dwc setup, using UC Cultured Solutions UC Roots, which is really great for increasing root development and also descaling and cleanliness but yea other than that we letting her really stretch, I AM GOING TO MAKE HER A MOTHER FOR THE NEXT TENT WHICH WILL BE UP IN LESS THAN ONE MONTH, but yea once her clones are rooted in the big tent I'm gunna flip her and she gunna take off!!! Thanks for stopping by guys let's keep it growing!!!! LFG!!!

Der Grow: Die Pflanze hat ordentlich gestretcht in der ersten Blüte Woche. 22 cm sind es geworden. Mal schauen wie viel es noch wird. Die Blütenansätze haben sich schön entwickelt. Neu Triebe ich immer sofort entfernt. Ich möchte bei den Trieben bleiben die ich durch das toppen erreicht habe. Die Parameter in Woche 6: Controller Einstellung Tag: Advanced AI Luftfeuchtigkeit 50% - 60% Controller Einstellung Nacht: Advanced AI Luftfeuchtigkeit 50% - 60% Durchschnittliche Tagestemperatur: 25 Grad Durchschnittliche Nachttemperatur: 22 Grad Durchschnittliche Luftfeuchtigkeit Tag: 55% Durchschnittliche Luftfeuchtigkeit Nacht: 55% Durchschnittlicher VPD Tag: 1,3 Durchschnittlicher VPD Nacht: 1,1 LED Leistung: 40% = 145 Watt Beleuchtungsdauer: 12 Stunden Umluft: Stufe 1 oszillierend

Sherbet Queen Auto deserves only praise. I really haven’t had any problems during these little over ten weeks. And in the end I got above average yield. I wrote earlier but I will repeat the basic information: 81 days from when it sprouted until it was harvested. 3 weeks of vegetation. 7 weeks of flowering. 14 days drying 70 g total yield. 1 Sherbet Queen plant. In the end it grew almost 90 cm which is almost ideal for the height of my grow box which is a total of 180 cm high. All ten or so weeks passed without any problems, and in the end it produced large hard flowers with a sweet scent. After 14 days of drying in a grow box in the dark, I did the final trimming after the check I weighed the dried flowers and put them back in the jars. I also added moisture fighters to the jars that will regulate the moisture during final curing in the jars. And here we are at the end, Sherbet Queen is definitely a recommendation to everyone, I have no doubt you will enjoy the sweet smokes if you opt for this strain. I made an effort to write as much information as possible to help future growers on their journey. Thank you all for the comments and a big thank you to James from RQS for the great support. See you soon.

Its.growing strong and healthy.

14 day dry | Curing in Grove bags, filled 7 QP bags & got 56g of keif out the trim bin from only 2 plants! More pictures coming! STAY FROSTY GROWMIES

Waited for the roots to develop more in the little pot before transplanting to the air pot. Started low stress training on the others. They started a little slow at first but going now.

Great stuff

🚀 Week 8 Overall | Flower Week 3: Taming the Beast! 🌿 What’s up growmies! Hopefully you are enjoying your Christmas time 🎅 Today is December 29th, marking the first day of Week 8 overall and the start of Week 3 of Flowering. The stretch has been absolutely relentless! Even after my last adjustments, the girls were still pushing too close to the light. Today, I had to do some final low-stress training (LST) and bending just to maintain at least a 20cm gap between the tops and the LED panel. I’ve got my fingers crossed that this is the final week of the stretch—I’m officially out of vertical space! Recap of the recent "Rescue Mission": • Heavy Lollipopping: I’ve cleared out the entire bottom section (the "skirt") to maximize airflow and focus energy where it matters. • Canopy Management: Raised the AC Infinity net and thinned out the jungle. It was a massive defoliation, but necessary for the plants to breathe. • Organic Strategy: I’m still seeing those yellow tips from my initial soil mix mistake, so I’ve started adding Organic Silica to help the plants handle the light stress and strengthen their structure. The plants are looking much more manageable now, even with the minor nutrient burn. Now it's time to stop the vertical growth and start stacking those flowers! 🌸❄️ How's your end-of-year grow looking? Any advice for the Week 3 "stretch-ender"? One Love & Happy New Year, growers! 🇯🇲💚

dense, sweet, creamy flavored buds, great taste, pleasant high! good stuff!

🌺👋Salut les amis, 🌺Nous sommes au 48ème jour de floraison ce 11/11. 🌺Je suis stupéfait par ce changement de couleur sur les feuilles, j'espère que les bourgeons seront bien gouteux 🤤 🌺Après avoir obtenu un peu plus d'informations, je sais que j'aurais pu mettre plus de nutriments dans mon sol. C'est prévu pour la prochaine culture.👌 🌺 🌺❤️️Récolte prévue pour la semaine prochaine ! 🙌 🌺 🌺🤲Avec les feuilles et les plus petites fleurs je prévois de faire du Ice hash avec des bubbles bags et une mini machine à laver. 🌺Je partagerais ça prochainement✌️🎥 🌺🌺🌺🌺🌺🌺🌺🌺🌺🌺🌺🌺 🌺Intensité de la FC3000: 90% 🌺Ventilation : Extracteur mars hydro 6 pouces avec filtre à charbon puissance : 4/10 (24h/24h) + 2 ventilateurs à l'intérieur ( ON 10/24h). ils s'activent à un horaire différent. 🌺Arrosage : J'ai arrosé une dernière fois avec 1.5L d'eau et je vais laisser sécher au moins 5 jours avant la récolte. 🌺Température & humidité : NUIT : 15°C & 60% / JOUR : 23°C & 45% ❤️️Mon instagram 🌱 https://www.instagram.com/hou_stone420/

Week went good girls are drinking like crazy and growing broke a cola on one week and half ago she hasnt grown much since but its about healed now but she should catch up now

So the plant did well in the 9L airpots, and had a really good root structure. Out of this grow she was one of the largest out of the 4 plants. She didn't quite pull out the colours that this strain usually manages, but that's probably due to me not being able to lower the temperature. The harvest was quite an easy one and I didn't really get any fluffy buds as I had trimmed the lower part of the plant early on in the grow.

Papaya is not the tastiest fruit BUT yes it smell papaya its subtle🤓 Purple Pheno : you know the grape sour candy?🍇🍬Thats the smell! Green Pheno : its Papaya but Green Papaya Peel its hard to explain😝 Super frosty⚡️

week 8