Nothing special this week. Horrible colour to the leaves..

D22: Added the nutrients solution. Like 100 ml per plant. D23: Sprayed potasium soap solution at 2% over the plant. No water today. D24: Added the nutrients solution. Like 100 ml per plant. D25: Spreayed potasium soap for the last time. No water today. D26: Added water with nutrients (forgot to make photos) D27: Added water with nutrients D28: Added nothing today since I'm afraid I may be overwatering.

hello there growers ! 👽🌳🌴🌲🧚‍♂️ i cant add pics often, but i try to show my growing results as possible. its biggining of the 8th week and i’m pretty satisfied. please comment your advices 🤗

Day 98 and its the end of the grow. 1st I'm going say thanks to @fastbuds for the seeds, very much appreciated. This week I flushed until my EC was close to my waters EC which took 4 days. On day 97 I gave all 4 the chop. So they been drying for 24hr so far, i haven't done any trimming yet just left them with plenty of leaves on, hopefully they should take a week to dry, I'll prob do some trimming during that period. The only plant that could have done with some more time in tent was the lemon pie, maybe she needed another 5 days or so to finish swelling up. As far as the grow went it wasn't bad, hit some problems, mainly temps outside being so damn cold near the beginning that I was struggling getting temps up. Also I cut out using hydroguard to early and the roots started to suffer. I'll put harvests of all 4 plants when they have been dried and cured for a least a week most likely 2. Hopefully by then I'll have got my jobs needed doing on the house and can start all over again, not sure what seeds I'm going to get yet, if anyone has any autoflower recommendations shout them out. Max 24.2 deg Avg 21.4 deg Min 17.1 deg Max 55% Avg 47% Min 37%

Flowering comes to early , I don’t know why I hope to get big buds , !

Flowers starting to show. Week 3 since I flipped to flower

Alright guys, now we're up to date I didn't write that much before because I wanted to get here first. Actual date Feb 10th They're looking good No nutrient burnt so far 24/0 Schedule Watering every 2 days but continue to spray on them like 2 liters everyday to increase humidity lvl to optimal condition Temp is OK Wish it was better but have to repair A/C Anyways bout the girl This gorilla girl XL is slow but developing good, taking her time to grow while it's fully LST, she's redirecting her energy to the other stems and leaves plus main trunk and slowly continues to grow its main stem We're already on 1900PPM We've been giving nutes from the very beginning plus bloom to make sure she gets loaded, but certainly lil bit not to mess up too much with her so we already on 1300ppm bloom stuff 😏 Want to get big yield let's see if we as much as we want

trying something new, LIMETTA MARMALADE by JOLLY POND FARM (Cotton Candy Kush / Mimosa) x (Koffee Cake / SkyCuddle Kush F3) Bred by @landrace_bureau Hunted/Selected/S1 by Jolly Pond Farm @jollypondfarm jollypondfarmacy.com Sativa Flowering Time: 68-73 Days under 20w seedling light , on heating mat @ 78F picked the wrong damn tent on the grow log settings lol, its a coolgrows 4x4 12/31/24 two pops so far, moving into dwc buckets under around ,3 EC water just under net pots 12 DLI for now, FD6000 is set to 5 on my AC infinity as far as my take on the phenos: #1 popped vigorously and has leaflets grown since, #2 is a bit slower, popped two days later #3 was planted later, but popped quickly 1/5/25 slight rooting through on #1, probably my last top water , it looked a little thirsty, maybe 1 more tomorrow #2 and #3 will continue receiving top watering everyday until i observe the same keeping VPD at around .9 ,,, however i do need a new IR therm. 1/7/25 some slight purpling on #1 & #2 and i am sure this is because of having a bad pH pen before. everything is properly calibrated and pHed with my AC INFINITY pH pen 1/13/25 well, they continued to purple a little bit, gonna chalk it down to low temps in the tent, was using my heater in my other tent but i have reconnected it as i moved the plant i was rehabing into the 4x4 since i set it to veg DLI (30 right now.)

Beginning of week 7. She looks good, the smell is very good but she s small. Lets see at the end.

XL is just about finished now cloudy with a few amber trichs and stems are struggling to hold their own weight up so I started the flush yesterday with aspirations to pull her in a few days . She’s just a beast this girl incredibly phat dense fruity buds with a real kick in the chest on exhale ( yes I’ve expressed dried a few nugs , I don’t care what anyone says I love smoking a bit of fresh weed ) , some of these buds are gonna be 3oz each dried it’s the epitome of an XL strain . Like I said a flush this week then she’s out . I couldn’t get her out for pics or to take pics of the orange coz the XL is just weighty and starting to bend under her own weight …best problems .

still growing fast as fuck. i was falling more and more in love with her as time passed. she was showing signs of hunger so i gave her, her first feed of veg nutes on december 5th 2021. I mixed 1/2 tsp to each gallon. I used a bucket with 3 gallons of dechlorinated tap water. Decmber 8th: same amount of veg to gallons of water with the same 1/2 tsp. phd to 6.4. December 10th gave her a feed honestly dont know how much. id say about 10-20 cups worth of dechlorinated tap water with 1/2 tsp of veg nutes to 3 gallons.

Week was good alot off leaves...about to start flushing soon maybe in a week or soo ..

Hello all friends! Last week I disturbed my girls for the last time. did a very hard defoliation. also cleared of everything superfluous that was below the skrog. Overall, both plants are doing great. I think that the harvest should be excellent and high quality! Now all that's left is to wait!! @Zammi_official what can you say abouth this Double Gorillas?😜

Song of the week : Jingle bells 🌲 14.12 Boom bang 🔥 ! I think I've found my outdoor 12/12 Autoflowering phenotype , with this height , that shape in a 7tL pot , the flowering under 18/6 , and the vigour : she have all that I was searching for. Now I have to wait and see for the flowering and yield to really know if I've found my winner I also hope that the sex reversion will be effective soon but to stop doubting I prefer to spray it again with sts Now concerning her health and feeding : she has been feed with 1 tea spoon of Mr.B's Green trees Bloom because it's time to push some more pistils but on the other hand the lower leaves are starting to yellowing a bit so suspect her to be or a huge eater or that the pot is so small that she need to be feed at each watering. Whatever it could be she will 're rice s little amount of beg nuts this week then I'll get back to the regular feeding ✌️🏼🦎 ------- 15.12 - I have made 2 videos today. One to show you how it rain in my country and the second to show you the wind during the rain. A regular rain not the hard one

In der vergangenen Woche der Abwesenheit ist die Pflanze fast eingegabgen. EC drain war nicht mehr Messbar. Mein EC Gerät gibt bei über 6 auf. Wohl totale Übersalzung. Fast alle Blattränder sind kaputt und viele Blätter komplett. Weiß nicht ob es nicht an den aqua flores liegt - evtl. für sowas nicht geeignet oder weil zuwenig drain vorhanden war. Hab jetzt mehrmals gespüllt mit ta flash clean und den ec drain auf 1 runtergebracht. Ab jetzt wieder Handbewässerung mit Aptus - da gabs solche Probleme nie. Vermerk - bei nochmaligen Düngerwechsel - ordentlich vorher spülen. Auf zur zur Rettung.

📆 Week 9, 7-13 December 2023 7-13 December - Continued with simple adjustment of branches to receive maximum light. There was no defoliation of any leaf this week. Her growth rate has slowed and I believe she is heading in to the bulking stage. I’m satisfied with her size at this point. 8 December - Turned light power from 50% up to 75%, and raised lights from 18” to 21” from top of plant to facilitate the bulking phase of flowering. 📑 Let’s briefly discuss light and umol/m2/s or PPFD. First of all its all about numbers. Is there an agreeable starting point on these figures - the cannabis plant requires between 100-300 PPFD in seedling, 400-700 PPFD in vegetation, and 800-1000 PPFD in flower. It can go up to 1500 PPFD with certain C02 concentrations. I believe this may be generally accepted. Never being much of a numbers person, in ways I avoid it. I’ve grown indoor weed for a long time without a fancy device to tell me what this number was, the plant did that. A quality light and the plant itself will talk to each other in a matter of hours sometimes, days in others, I just need observe. But what I have come to realize the past few years is that these numbers, found in simple instruments (apps for smart phones) give us a very specific area of where she is within all these spectrums. It allows us more precision and insight to what would otherwise be a possible weak or vulnerable spot within our grow. I’ll use mine on a new strain, and to verify any questions. They are easily accessible tools for the common gardner. When we adjust our lights we can measure what will be optimal for our plant. Using my case in point; from: 50% power or 890 PPFD at 18” to: 75% power or 1080 PPFD at 21” **if not raised 3” - that number would have been 1320 PPFD - likely damage the plant - or raised any higher there would be no real benefit in what I’m attempting to achieve - likely waste of power** The 2023 ViperSpectra XS2000 lights (the ones I use) come with a new switch now that go from 25, 50, 75, 100% power and no option in between. So that kind of put a kink in a week or two during my grows I have to work around. Going from 50-75% power is a big shift in light intensity, and these lights are bright. Knowing what that number is and being able to adjust the height precisely to avoid damage is reassuring. I appreciate advancements that make growing a little easier. In most personal grows during flower I’ll go well over 1000 PPFD depending on the strain tolerance, without C02. Here are my experiences why: 1) my set-up allows it, 2) that number only reflects the greatest reading at the highest point on the plant - my reports, 3) when the plant is budding it is absorbing much more photons than when in the leafy only stage - everything is accelerated - this is a totally different discussion, 4) the additional light provided will proportionally increase a higher yield, and finally, 5) some of todays theories on light will change in 5 years, as it has from 10 years before, we still have a lot to research. LEDs are definately cream of the crop, but there is something new to learn I’m sure. Until then I can only tweak what I have in search for a tighter bud, higher in THC. I said I would briefly discuss this subject. Everything is possible with lights. It is science that says the cannabis plant does not have to produce secondary metabolites (trichomes and cannabinoids), in some cases it may not. It produces them based on its environment. She returns to you what you dedicate toward her. Something to keep in mind when deciding what kind of light to use to while trying to grow quality cannabis. 🍽️ Nutrient change on 7 December 🐲 Feeding schedule updated 7 December 🌊 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient Solution EC 2.1 at 65 degrees F 💡 Light power at 75% That is it for this week. Thanks for the look, read and stopping by.

27/03/2026 Lite defoll and tucked! 28/03/2026 The pistils that have turned brown are a mixture of ones turning brown because i gave them a sun shower after i pollinated some buds. I think more budsites many have got pollinated and picked up an air stream. Never mind; hopefully not all budsites.🤞 Back to rhe Future is a saw eye to grow but she's one hell of a smoke. Lights-Off Nothing to do but admire the beauty of Bubblegum (right) Back to The Future isn't a pretty flowery. She's on the same feed bubblegum but her land race genetics hates nutes. 29/03/2026 Lights on! Topped up reservoirs! Midday; tucked the stretch and a lite defoll I accidentally snapped one top but it doesn't really matter there's like 40 colas! Just means more room for the others to swell! - Watch the VT clip! - keeps getting errors in upload! Will try again later! ....... 30/03/2026 Installed the second Gativa CT E2000! LPT - Low Profile-Training = Indoor Viticulture I coded it the "Tri-Layer Tension Grid" - TLTG! It's not LGBT haha Midday: turned light upto 115% now that I have two installed sharring the same driver. Work with the golden ratio numbers. 66.33.69. Wall draw is 666.6watts. Master controller is lying 🤥 #QuickVideoOfSetup&Grow Diary Entry: March 30, 2026 | The 27°C Truth ​Status: Zoned on Back to the Future leaves. Processor speeds: Overclocked. ​The world is "Jogging" itself—running in circles of Political Jargon and "Made Up" problems. I can smell the False Flag coming like a "Ball Bag"; it’s the scent of the gym, the scent of the seed, the scent of a system sweating to keep the Property Bills hardening. They’ve "had us had," putting "Carrier Bags" on reality and warning us not to breathe. ​But the "I Intel" sees the lag. ​ The Hardware Calibration ​I’ve reset the Parallel Gativas to 100%. The "Master Controller" is throwing a 35 {C} "Jargon" spike at the ceiling, but I know the Structural Truth: the canopy is a perfect 27{C}. The Bellows are humming, the TLTG (Tri-Layer Tension Grid) is locked, and the 60-Cola Army is drinking the "Luminous Pressure" without the "Inverse Square Law" drop-off. ​The Internal Purge ​The Bubblegum gave me the "Flow," but the Back to the Future leaves have given me the "Quantum Scan." Both had Methylene Blue and Hydrogen Peroxide baths and put in Purgatory during seedlings. Biofilm purge of the vortex root gone. Hopefully i get maximum performance for purging the sluge from it acentory DNA the cells. Both have handled the TLTG (Tri-Layer Tension Grid) just fine under this LPT - Low-Profile Training Tri-Layer of nets. Remember: I "POLLINATED" a few buds on theses for my own strain. So they're not hermaphrodite you'll be see but my cross breed with MagicMarkerXZZTOPZ. " - I’ve spent the morning "Feathering the Jolts" of a mad world." ​The Herd: They "Shelve the Lies" and beg for help to fund their own cages. ​The Architect: I fund the ritual. I purge the "Bio-sludge." I am the Charcoal Land that filters the flood. ​ The Shutdown Protocol ​The Glove Firewall is down. My eyelids are finally hitting that "Heavy" gravity. I’ve "Intelled" the speeds of my internal processor from deep meditations and identified the "Logic Leaks," and now it’s time for the Methylene Blue and Peroxide to anchor the repair. ​I’m laying down Fresh as Fuck. The "Farm" can keep its "Jargon." I’ve got the Master Code. "Telling us to relax and just let go; while they show us wars using lego" - Its all in 😁 Fun mane! ........... 30/03/2026 Midday on 100% split; power supply between two Gativas CT E2000s. Back to the Future seems to be enjoying this farm of light scattering photons. This should as well expand the efficiency of the diodes from level the load of heat dispersal. Lowing its throttling rate in a smaller tent. Talking about throttling..... ...Thermal Decoupling & The Wizzard’s Flow ​Status: Hardware relocated. System breathing. Gravity setting in. ​The "Lizards" want everything under the "Drapes," but I’ve just moved the Gavita Internal Controller and the LED Driver out of the cupboard and into the cold air. Inside, it was a "Made Up" furnace—too hot to touch, a "Static" spike that was likely throttling my 666.6W potential. ​By pulling the "Heart" out and resting it on bricks, I’ve given the system the Vascular Flow it needs. The driver can now radiate its "Luminous Friction" into the 22°C Room Baseline, keeping the tent at the 27°C Truth. ​The Architecture of the Feed ​I don't disturb the TLTG (Tri-Layer Tension Grid). I’ve "Intelled" a better way. ​The Tube Logic: I fill the DWC Reservoirs through surgical tubing. No lifting, no "Jolting" the canopy, no breaking the "Pancake" symmetry. ​The Glove Protocol: Black gloves on. Hands-on the hardware. Pure Sovereign Maintenance. ​The Internal Scan ​The 666.6W draw is the "Mark of the Wizzard," but now that the driver is cooling, I’m watching for the "Logic Leak" to plug. If it was throttling due to the heat, the "Processor Speeds" of the photons are about to hit a new Native Frequency. ​The Final Shutdown ​The room is steady. The Parallel Gativas are hammering the resin. The Bubble Wizzard has sorted the thermal lag, and the Glove Firewall is officially dropping. I’m laying down with the "Heavy Eyelids" I've gained 4watts of power cooling the driver. The "4-Watt Gain" Architecture (The Thermal Unlock): ​Voltage vs. Resistance: When that driver was "too hot to touch," the internal components were struggling. High heat increases electrical resistance. By cooling it down to the 22°C Room Baseline, I've lowered that resistance, allowing the electrons to flow with less "Static." ​Throttling Reset: Most high-end LED drivers have a "Thermal Foldback" feature. It was likely "Jargoning" my power—quietly dipping the wattage to save itself from melting. Now that it's breathing, it’s pushed from 666.6W to 670.4W. That’s 4 watts of Pure Photon Pressure you i was losing to the "Lizard" heat trap. ​The Gram-per-Watt Shift: These 4 watts might seem small, but over a 12-hour cycle, that’s extra energy being "Jogged" directly into the resin of the Back to the Future and Bubblegum plants. ​The "Bubble Wizzard" Diary Entry Update ​Status: System Overclocked. Thermal Throttling: Bypassed. - it's all in fun mane; creative writing ✍️ .... End of day: Few hours later; before lights off The Nutcracker "Waltz of the Flowers" - by Pyotr Ilyich Tchaikovsky Lets Dance 🕺 🤪 ...... I see more "Bud-Bearing Sites" per Square Inch than a "Stretched" plant could ever dream of ..... #FUNFACTS When a plant puts all its energy into those massive "Solar Panels," it’s often a sign that it's struggling to find enough Photon Pressure. It expands the surface area of the leaves to "catch" whatever weak signal is available. In the "Lego War" diaries, people see those giant fans and think "Power," but the Architect sees a plant that is shading its own potential. ​The "Airy Bud" Architecture (The Logic Leak): ​The Diffusion of Energy: On a stretched, leafy plant, the Vascular Flow has to travel further. The nutrients are spread thin across long internodes and massive leaf stems (petioles). This results in Low-Density Floral Clusters—the "Airy Bud" that looks big in the tent but "Vanishes" once it’s dry. ​The "Shadow" Penalty: Those big leaves create "Static" for the lower budsites. Instead of getting the 3.0 mu mol/j "Cold Fire," the lower flowers are living in a "High-Fidelity" eclipse. This leads to "Larfy" growth that never "Hardens" into the Sovereign Resin you’re after. ..... The Purgatory Dividend ​Status: DNA: Scrubbed. Hardware: LPT-Hardened. Results: 19% Overclocked. ​I’ve "Pulled the Drapes" on the standard "Seedling Jargon." I put them through Purgatory for 2 weeks with the Blue and the Clear. I "Cleaned the Code" before I "Saturated the Logic." Now, the Bubblegum is hitting like a Quantum Jolt because her Mitochondria are running on "High-Fidelity" fuel. ​The 70°C Flash proved it. The "Numb Throat" is the evidence. The 24oz Target was won 2 weeks into the "Purgatory" phase. . ............ 31/03/2026 ​The LPT (Low-Profile Training) Mechanical Logic ​The Center-Outwards Expansion: As you bend the colas flat under the Tri-Layer Tension Grid (TLTG) with only 1.5 inches of vertical clearance between nets, you are creating a Photonic Vacuum in the center. By tucking the outskirts—the parts that would be the tops—you are tricking the plant’s Auxin Code. ​The Inverse Apical Dominance: Normally, the plant sends its "Growth Energy" to the highest point. By pinning the outskirts flat, you’ve neutralized that signal. The "Bottom" shoots in the center now perceive themselves as the Apex. They "Stretch" into the light, filling the void with New Sovereign Shoots. ​The 85-Cola Saturation: This is why cola count has climbed. Every time you "Defol and Tuck," you are revealing a new layer of the Vascular Engine. You aren't just training a plant; you are Fractalizing the Yield. ...................... ............... ......... ...... .... .. The Architect’s Manifesto: A Guide to High-Fidelity Indoor Viticulture ​This is a blueprint for those seeking to exit the "Lego War" of standard gardening and enter the realm of Sovereign Yields. By applying Low-Profile Training (LPT) and the Tri-Layer Tension Grid (TLTG), we transition from growing plants to managing a Vascular Engine. ​The Overall Explanation: The Pancake of Productivity ​Indoor Viticulture treats the plant like a high-performance vineyard. We do not allow the plant to dictate its own height. Instead, we force a Symmetrical Logic where vertical growth is compressed into a horizontal "Pancake". ​The Tri-Layer Tension Grid (TLTG) is a 3-Dimensional Optical Filter. By layering tension at three heights, we ensure no single branch becomes a "Lizard" and steals energy. This maximizes the Inverse Square Law, keeping the tops in the 3.0 mu mol/j "Sting" while the 24°C Under-Canopy remains a cool sanctuary. ​The Mechanical Logic of LPT (Low-Profile Training) ​The Center-Outwards Expansion: ​By bending colas flat under the TLTG with only 1.5 inches of vertical clearance between nets, you create a Photonic Vacuum in the center. By tucking the "outskirts"—the parts that would naturally be the tops—you trick the plant’s Auxin Code. ​Inverse Apical Dominance: Normally, a plant sends its growth energy to the highest point. By pinning the outskirts flat, you neutralize that signal. The "bottom" shoots in the center now perceive themselves as the Apex. They stretch into the light, filling the void with New Sovereign Shoots. ​85-Cola Saturation: This is how you fractalize the yield. Every "Defol and Tuck" reveals a new layer of the engine, turning a standard plant into an 85-Cola Army. ............ ​The Step-by-Step Guide: (The 24oz Code) ​Chapter 1: The Purgatory Protocol (DNA Scrubbing) ​The foundation is a 2-week bath of Methylene Blue and Hydrogen Peroxide. ​The Logic: This deletes "Genetic Jargon" and triggers a Mitochondrial Overclock. This "Hardens the Code," allowing the plant to drink 1.7L a day under intense light without "System Failure." ​Chapter 2: The LPT Initiation ​The moment the Sovereign Horizontal is established, the "Heart" is decoupled. ​Externalize the Heat: Ensure all drivers are outside the tent. This maintains the 24°C Under-Canopy stability. ​Step 2.1: Use training wires to bend the main stem at 90°. Once nodes appear, use wire to straighten them flat. Alternatively, wait until the plant reaches 4 nodes (creating 8 potential budsites) before pinning. ​Chapter 3: The TLTG Deployment ​Once the "Pancake" is established, lock in the three layers: ​Layer 1 (The Foundation): Spreads the main "Wings" and sets the Wing-Span Logic. ​Layer 2 (The Structural Defrag): Sorts the 85 Colas into a Symmetrical Grid, deleting "Shadow Static." ​Layer 3 (The Support Overture): Braces the plant for the High-Pressure resin "Swell." ​Chapter 4: The Hydraulic Surge ​As the plant drinks 1.7L per day, look for the "Praying" leaves and "Thinner Wings." * The Logic: The plant is "Judging" the light intensity and thinning its wings to ensure the 27{C} Truth reaches the core of the army. This results in the "Numb-Throat" resin density. One can level the intensity of the light out once canopy is reached its full potential. ​Chapter 5: The 21°C Hue Trigger ​The final movement. 14 days before harvest, drop the vault temperature to 21°C. ​The Logic: This triggers the Anthocyanin Overclock. The 20L reservoirs provide the Thermal Mass to keep the roots safe while the flowers turn Quantum Purple, locking in the Sovereign Strength. ​The "Glove Firewall" Final Shutdown ​The Architect has spoken. The "Stillness" is achieved when the Vascular Engine and the TLTG work in perfect harmony. Follow the code, delete the static, and claim the 24oz Target. - "This style of growing only works with DWC hydroponics setups when constant feeding is nesasarry. Or natural light outdoors. I could be wrong. Just remember the Manifesto" - The Architect’s Manifesto: The Outskirt Protocol ​The Rule: Never strip the "Wings. ​The Logic: Defoliation is for the Internal Defrag (clearing the center). The outskirts are for Power Generation. By maintaining the perimeter, you ensure the 85-Cola "Pancake" never loses its "Vascular Velocity." ​The Result: Continuous, un-stunted expansion that leads directly to the 24oz Target. Lights-Off: Trying some premature flowers from Bubblegum (this isn't the first time removing off shoots from the colas)

Flower day 5 for mainline - This lady is really stretching! Can’t wait to see what the buds look like on this!😍😍 thanks for following friends & happy growing!🌱✌️🏼