FLOWERING IS UPON US for all of the strains I wanted to let the 2 purple berry Kush veg for another week but forgot to put them under the TS-1000 but hopefully there still gone grow fine it is experiment achter all. Have made the switch for 12/12 couple day's ago and i see them all developing 😍 hopefully by the end of next week it will get interesting 👌🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

They are growing healthy. They all recovered from the issues, but they are all small.. They are drinking a lot lately, I've been struggling to keep the temperature below 27/28°. The only plant who didn't had any agressive movimentation, handling, whatever, has 90 cm, huge.

Servus Moin! Die Epic Buzz zeigt jetzt in der letzten Woche nochmal, dass sie noch ein wenig nach reift. Sie bekommt jetzt noch 2 Tage Licht, dann 2 Tage Dunkelheit. Dannach wird sie im Zelt zum trocknen aufgehangen.

My first attempt of growing with my own DIY setup. Specs : - PC box 19x42x43cm (after a few weeks I changed it with a bigger carton box) - 4 x Bridgelux Vero 10, 3000K, 9.1 Watts, 80 CRI, 270mA, 143Lm/W - Mean Well HLG-60H-C350B 70W LED driver - 100k Linear Potentiometer for dimming lights - Aluminum profile 30x7cm for mounting LEDs - ESP32 Dev Board - DHT22 temperature & humidity sensor - 2 x Noctua-NF-S12A for ventilation with PWM control by microcontroller - 3lt pot - Blynk IoT app for remote control Started germination of 1 feminized Northern Lights seed from SensiSeeds using paper towel method. Sprayed with some water and store it in small plastic food container. Seed popped after 24 hours and after 48 it was ready for pot. Unfortunately didn't take any photos of the process.

21/05 Last day of this res EC: 1,2 PH: 6,1 22/05 CHANGED RES Made Defolation EC: 1,6 PH: 6,04 23/05 EC: 1,58 PH: 6,3 24/05 something wrong in the leafs. it looks like light burn: so I've choose to keep on only red light (bloom) and lowered the lighting time to 18-6 EC: 1,48 PH: 5,5 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍 Lesson Learned: IN THIS PHASE IT'S POSSIBLE TO USE ONLY BLOM LIGHT (RED) 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍 25/05 EC: 1,47 PH: 5,9 26/05 EC: 1,38 PH: 5,51 27/05 EC: 1,47 PH: 6,1

Alright, guys, today is officially day 7. Which wraps up the first week of this little girl's life.. So far, she's off to a great start. I actually just before making his diary gave them they're very first feeding of just maxi bloom, but very little, maybe .05 of a tsp per gallon.. I think i'm gonna let this girl grow naturally like i did my cream and cheese.. Thank you to Kannabia Seeds for making this grow possible.. I hope everyone is doing well and so are there ladies , God bless and happy growing ✌️

Finally broke out of the shock that they were in.

Nicely

Ajoooooo das ist bzw war mal ne lange check Liste..Gefällt mir definitiv:) Die WW muss noch trocken habe sie Komplett Manikürt da vielen 30g Zucker Blätter nass ab und zu Butter verarbeitet Schätze werden so 75g trocken.

Lots of pics not much to report. Flushing and starting to yellowing nicely. Trichomes are in check so I plugged light out and left these two girls in darkness for 36-48h. These yielded clearly most in this round. Nice job Barney's with this one 👌 Can't wait to smoke this one out once cured couple weeks 👊😍

🌬️ Dry & Cure Process: • Hung whole for 12-14 days @ 66-73°F / 48-61% RH • Cure in glass for 3 weeks, burp jar’s for 30 min → Result: Smooth, rich, and loud. Gas upfront, fruity on the back. No harshness, just quality. 🌟 Benefits of This Strain: 🧠 Spiritual: Deep introspection, great for meditation or creative flow 💊 Medical: Calms inflammation, eases tension, lifts mood — great for end-of-day recovery 💪🏾 Physical: Full-body melt, especially helpful post-workout or long shifts 🏾 Overall: Euphoric & sedating without being too heavy. Night-time favorite. ‼️I’m not a physician or practitioner of medicine I just grow the herbs of my ancestors who used them for medicine

Was another easy week - lots of healthy growth. Simply watered when dry, did some daily LST and leaf tucking. The green crack is definitely the fastest growing out of all the plants, and the one runt LSD25 is a bit smaller but still chugging along.

Hear we go finally week 11!! Getting really close last 1 week in a half to 2 weeks and she is coming down. Looks like the Hidro Mars ts1000 is Healping and giving the plant a good push! I started to flush hear out 3 days ago already,no ph't water. She is looking Amaizing !!!❤️😎 The colors 🎨🎨 The smeal 😤 The Buds 🌲🌲 All wunderfol ❤️❤️ Thanks all for healping out and supporting really makes me happy and willing to grow more !! If you enjoyd and like't mi diarie hit that like Button and support ✌️😎😎 Thanks to All ❤️

Plants are now on the autopilot phase of the grow. The stretch has stopped and the buds have began to fill the branch tips. It's going to be very nice when they fill in.

Let´s get this going asap 😎 See you again very soon 😍

Giorno 2 Molto molto appiccicosa e molto profumata, le cime sotto non sono ancora tanto piene ma i pistilli stanno iniziando a maturare in quantità. Il taglio è fissato a 1 settimana e mezzo da adesso per la parte superiore più matura della pianta, e la parte inferiore rimarrà una settimana in più a maturare.

Sorry I got mixed up with the weeks (newbie on growdiaries as well). So it took 8 weeks of vegetation to come to the latest pictures. Unfortunately only one plant made it. I lived in warmer regions before and used empty car tires as a pot for a long time, they were usually been able to grow three plants and more in it but that’s another topic. This is my first grow in colder conditions. Around week 6 of vegetation I started adding BioBizz Grow to the water.

Week 2 in the books here and all is still Lookn good. Should be coming up on fim day pretty soon so that we can better manage plant heights through the stretch. Don’t expect to take much more than another week or so before we make the flip to flower. The Ghost Train clone is still fighting for roots so we’ll likely wait and see based on this cut. As soon as she starts to perk up we’ll move em over. Alls well so far👍. Background I’m killing a few birds with one cycle here. Got some famed breeder strains to show off - genetics that we just haven’t gotten around to growing successfully. Details as follows; Outlaw Seeds - Muffin Berry Why these guys aren’t listed on GD is surprising to me. All the hallmarks of a budding quality breeder from what he read although, I admit, this is our first go in real time. Just another addition to the berry strains as we continue our everlasting quest to find that “best berry” of them all.👍 AMS - Pineapple Express Great co. And I’ve got a full stable of their genetics kicking off this year. This strain has been a massive unicorn for us in the past and I still have yet to see one flower out to the finish proper. Can’t wait to see what this one does. The reviews have been terrific so 🤞. OSS - Banana Sherbet A kick in freebie that came with 2 other strains by OSS. Proven and reliable breeder with excellent hybrid combos. I expect this banana sherbet to be no different and early signs are that she’ll be one of the strongest👌. AMS - Ghost Train (clone) Another unicorn that we’ve had issues with. Our outdoor plant that was supposed to be an auto and turned out to be a photo. Unlikely with the typical fall weather that she’ll see harvest so this is an opportunity to take a cut and possibly salvage that grow. Really looking forward to this one for sure. They’ll all sit in bucket company bags and containers and we’ll be irrigating on drip lines with fewer plants than usual in this space. Hopefully we don’t run into any deficiency issues given that these buckets are a slight detraction from our typical dutchies. Only time will tell, here we go again👍🤞.

I trimmed some leaves to allow the light in beter. Plant A and C have lst applied (started week 3) and plant B is just left to grow mostly normal. plant B is 62 cm high and plant C is 47 cm high.