Likes
Comments
Share
I'm so happy to see pre flowers at 4 weeks... going into week 5 Dutch Blue Automatic is looking strong and robust growth everywhere. Thank you Marcel, @ Spliff Seeds for the opportunity to grow! Life is good! The true UVB light has been killing any insects and any mildew or mold... UVB is a must have in every garden.
Processing
Likes
32
Share
@Hawkbo
Follow
The first one is still a little weird its stocky and stiff the 2nd one is lookin good. my ph meter broke and Hannah Instruments sent me a new probe. When I got it and checked run off everything was fucked up so I did a heavy flush on everything and a feed. Found some shit called Gnatrol on Ebay for the fungus gnats larvae added to the mixidk if it will work tho. Pictures were taken on Day 7 of Bloom
Likes
16
Share
Day 100 - All ladies looking good at this point in the grow. Noemi's pistil hairs have mostly all curled up and turned amber in color. Also her trichomes are starting to appear amber in color. Will flush her pot with about 5 gallons of pH'd water soon. Natalia's pistils are about half curled up/amber and half white. Her buds still appear to be packing on trichomes and weight.
Likes
6
Share
@Excalibur
Follow
05/10/2018 New Tent setup. 4 plants - Veg room. 06/10/2018 Re-arranged the room to make it more practical. 07/10/2018 2x Seeds Pineapple Haze dropped into Root Riot. 08/10/2019 Propagation kit added 11/10/2018 Day 5 Sprouted 12/10/2018 Day 6 - Stretching 13/10/2018 Day 7 - Added to the tent setup.
Likes
43
Share
🌱: Smooth growing, 2 leaves removed, topped 💧 : 3l, SIP 3l 💡 : Dli 45 mol/m²/d 🤔: Nice even canopy
Likes
4
Share
@Sadom
Follow
27.07.: Zu Beginn von Woche 6 habe ich mich dazu entschieden die G41 an dem Großteil der Triebe zu topen. Dadurch erhoffe ich mir einen buschigeren Wuchs mit mehr Trieben und mehr Zeit für die PBB in Größe aufzuholen. An den Schnittstellen, wo die Pflanze getopt wurde ist an einigen Stellen ein roter fast blutähnlicher Saft ausgetreten. Ich hab vorher noch nie gehört oder gesehen, dass das passieren kann und weiß auch nicht woher das kommt. Die PBB brauche ich nur kaum zu trainieren, da benötigt die G41 mehr Zuwendung. Da die Pflanzen größer und die Töpfe mit der Zeit immer trockener werden, verlängere ich die Gießzeit auf 5 min. 28.07.: Heute sind mir zum ersten Mal die Stempelhaare an der PBB aufgefallen. Sie ist also schon bereit für die Blüte. Ich denke, das liegt daran, dass die PBB eine fast flowering Sorte ist. Sie muss aber noch warten, bis sie ihren Platz vollständig ausgefüllt hat. 30.07.: Beide sind gut gewachsen. Die PBB konnte gut gegenüber der G41 an Höhe aufholen. Jetzt sind sie fast gleich groß. Ansonsten gibt es nicht viel zu machen oder bemerken. 01.08.: Zum Ende von Woche 6 habe ich das Scrog Netz installiert. Die kommende Woche werde ich die Triebe immer wieder unter das Netz stecken, damit niedrigere Triebe aufholen können und ein möglichst einheitlicher Wuchs entsteht. Bei der G41 gefällt mir die Anzahl der Triebe schon sehr gut, bei der PBB ist noch Luft nach oben. Ich befürchte allerdings, dass bei der PBB nicht mehr sonderlich viel passieren wird. Nächstes Update ist dann in Woche 7.
Likes
85
Share
@Papa_T
Follow
Sunday Sep 12 Day 43 Flower -No water -Sugar leaves on buds still continuing to turn purple -May be genetics as I found other pictures online of Blue Jack with purpling sugar leaves -Fan leaves still struggling -Smells really nice -Trichomes are starting to turn milky -Is possible that I may be a week behind in my calculations. May already be in week 8 but it’s week 7 🤷‍♂️🏼 Day 44 Flower -No water -Not much change -Bud continues to ripen up -Not much more to say for today Day 45 Flower -Continue to initiate flush -May be a little early but I’d rather the plant self consume itself until harvest vs being late on a flush and having un smokable weed -Pushed 32 litres through in 8 litre intervals -1st 8 litres -6.33 PH tap water 62.5 PPM -Runoff 1.8L 6.28 PH - 1660 PPM -2nd 8 litres -6.33 PH - 63.7 PPM Runoff 2.8 L 6.41 PH 1220 PPM Runoff 2.9 L 6.52 PH 942 PPM Runoff 1.6 L 6.56 PH 739 PPM -3rd 8 litres -6.32 PH - 62.5 PPM Runoff 2.7 L 6.72 PH 495 PPM Runoff 2.7 L 6.86 PH 349 PPM Runoff 2.4 L 6.88 PH 272 PPM -4th 8 litres -6.33 PH 64.2 PPM Runoff 2.6 L 6.96 PH 235 PPM Runoff 2.5 L 7.03 PH 201 PPM Runoff 2.5 L 7.07 PH 184 PPM -That’s it 32 litres pushed through total -Don’t understand why the PH drifted that high when my water was at 6.3 the whole time -Buds are looking really nice and frosty -Smell nice -Fan leaves not so nice but we care about flower Day 46 Flower -Fan leaves not hot -Buds are awesome -The flush is on -Getting close to pulling her into her 72 hour dark period -Not much more to say today Day 47 Flower -No water -Fan leaves look more like shit -Buds seem to be getting fatter -Not much more to say -Counting down the days to harvest now Day 48 Flower -No water -Fan leaves are junk nothing new -Buds are just bursting out almost like fox tailing but not really -She’s really pushing though this flush Day 49 Flower -8 litres of water with 2 tsp of Lotus Carbo flush -8 litres 6.41 PH - 251 PPM - Runoff 1.5 L 6.88 PH - 409 PPM -Buds still getting fatter -Getting close to the finish line This is the end of week 7. We’re getting close to the finish line here. Flush is looking good and she’s consuming her fan leaves.
Likes
9
Share
I love it when the buds are so fat thick and heavy in weight that they bend the branches, All plants being flushed for the next 2 or 3 weeks to get that ripe sweet taste ALL MOST THERE ! ( patience patience) LOL.
Likes
1
Share
@Ananacio
Follow
Hola! Van por el dìa 20 de floración. Casi no he vuelto a defoliar, aunque esta bastante tupido no quiero estresarlas mucho. Saludos
Likes
47
Share
Day 64 - I've been patiently waiting for the time to come, and it's finally here! Changed the lights over to 12/12 to send the tent into flower. Current light settings R99 W99 B50 as suggested by California Lightworks. I did a full reservoir change - switching over to bloom nutes. I also added some Si28 and P31 Microbes to the reservoir to test out this new product that I was fortunate enough to receive samples of. I've seen the results of others with crazy booming root growth.... Let's see what happens! Day 65 - I swear, it's like she's been waiting for me to flip the light cycle. I kicked one plant out of the tent so now there's even more room for improved air circulation and light distribution. This plant is a serious beast! Day 67/ Day 3 of Flower - Last massive round of defoliation before I sit back and let her do her thang. ✌️
Processing
Likes
3
Share
@Nvchods3
Follow
inicio floracion tecnica LST + poda Apical
Likes
51
Share
@Waveform
Follow
Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.
Likes
31
Share
@bybil
Follow
на этой недели растения «чистились» слили все удобрения и 2 дня растения были на дистиллированной воде , растения отдохнули и вернули их на tds 600 , а позже 800
Likes
7
Share
@Pumbaa77
Follow
Anche stavolta provo questa Tecnica, quello d'infilzare alla Base del tronco con degli stuzzicadenti. Prima incido con un coltellino la base del tronco da dividere le due parti, poi successivamente infilo degli stuzzicadenti, (alcuni Growers, che hanno un bel tronco largo, ho visto che ci infilano un bastoncino-le bacchette cinesi) da mantenere separati le due parti. Questo dovrebbe comportare un aumento di resina sui calici e anche di volume. Boh speriamo.... Domani 21/06/2021 Farò un altra pulizia delle Radici(Acqua Flushing) da ridurre drasticamente l'EC(da ricordarsi che l'ultimo risciacquo era circa 2000 EC- pH circa 6)
Likes
2
Share
@TTerpz
Follow
Start of week 12: 4/29/25 Fed with nutrients: 4/29/30 Fed with plain ph water : 4/30/25 Fed with nutrients: 5/2/25 Fed with ph water: 5/5/25 End of week 5/5/25
Likes
4
Share
@Xpie77
Follow
Kweekverslag – Amnesia Lemon Kush (HY Seeds) Datum: Woensdag 10 juli 2025 Medium: Aarde Potgrootte: 11 liter potten Zaden: 25 zaden gezaaid – 20 succesvol ontkiemd Week: 5 van de groeifase --- 🌱 Status Week 5 – Groeifase Aantal planten: 20 Gemiddelde hoogte: ca. 28–35 cm Bladontwikkeling: Gezonde, brede waaiervormige bladeren. Donkergroen en glanzend. Stam: Verdere verdikking zichtbaar, stevige plantstructuur Structuur: Mooie spreiding – planten ontwikkelen meerdere zijtakken Training: Eerste ronde LST (Low Stress Training) toegepast bij 12 planten Lichtcyclus: 18/6 Watergift: Regelmatig, afhankelijk van gewicht pot (om de 2 dagen gemiddeld) Voeding: Groeivoeding verhoogd naar 75% aanbevolen dosering Temperatuur: 25–27°C overdag, 20–21°C ‘s nachts Luchtvochtigheid: 55–60% Afzuiging/ventilatie: Actief, extra circulatieventilator geplaatst voor luchtverdeling --- 📌 Opmerkingen & Acties LST goed ontvangen – geen tekenen van stress of herstelvertraging Planten reageren krachtig op ruimere potten, zichtbare groeispurt Start van pre-flower verschijnselen nog niet waargenomen Overweeg volgende week te beginnen met bloeivoeding als internodes volledig ontwikkeld zijn Controle op ongedierte: geen tekenen van trips, schimmels of tekorten
Likes
19
Share
Processing
Likes
27
Share
4/5: Took 4 cuttings from the shortie 4/12: All 4 are rooted and growing! 5/1: Transplanted from 1gallon pots to 5 gallon pots. 5/3: Decided to grow one of them in my tiny tent and the other 3 will go outdoors. 5/4: Took 2 of them outdoors under the 270w and sunshine. 5/6: Trained all of them today and fed some boomerang along with the kelp, molasses, big bloom, and silica. Foliar fed and took the last one outdoors. The one in the tent is really flourishing! 5/7 - 5/17: Excellent growth! The supplemental lights are making all the difference.👍 Did some more training on all of them early in the week. The one in the closet is spreading out nicely and budding up pretty quickly...but what's very cool is that all 4 clones outdoors are flowering?!?!? I sure hope they go ahead and finish rather than starting to revegetate as the days continue to get longer. Much rain for the past few days, but it let up long enough for me to install another 200w of waterproof 3000k LED lights a couple of feet above them. Very intense lighting, great bang for the buck. So now, I've got 350w of 3000k and 120w of 6500k in the outdoor garden. That's gonna have to do it, as I also am using 1400w in my indoor gardens, plus a/c..bills are getting ridiculous. 5/18 - 5/28: The clone in the tent is still stacking up really well. I guess the ones outdoors are too, but next to the seedling plants, they seem puny. Many buds though... Since they decided to flower early, I sprayed them all down with a product that is loaded with hormones and auxins and stuff that's supposed to retard vertical growth and promote branching. It's also supposed to speed arvest time by as much as a week. I hope they can finish before the summer solstice (June 21), otherwise they might try to reveg instead of finishing.. Hopefully it helps keep them from stretching so much that I'll have to supercrop them. Their mamma was a shortie, so they really shouldn't get too tall anyway. I also foliar fed them several times this week with something called MicroLife Maximum Blooms, Pow! They love the stuff! 5/28 - 5/31: I did some training on a two of the outdoor clones early in the week between rain showers, and foliar fed with Microlife maximum bloom formula. She was looking a little N deficient, so I assume the dry amendments have petered out. They were dry enough, so I top-fed her with another couple tablespoons of cavern culture and on the 31st. I gave them big bloom, tiger bloom, grow big, beastie bloomz, silica, endoboost, signal, humic acid, liquid kelp/fish emulsion, and liquid molasses. The indoor clone is looking awesome. I fed her heavily on the 30th. It just feels so strange that I'll be harvesting outdoor photos in June!?! That's it for week 8- 6/1 - 6/8: Early in the week I gave them about a half gallon of water with liquid molasses, cal-mag, silica, and beastie bloomz only. I foliar fed them a couple of times during the week, right at daybreak. I fed them on Saturday, the 6th..about a gallon each..beastie bloomz, microlife maximum blooms, cal-mag, humic acid, grow big, big bloom, sweet & sticky, and signal. They are looking very good..buds galore. The indoor clone got the same nutes, but on different days. She's also covered in buds, and they are beginning to fatten up.👍 6/9-7/4: Busy with other gardens, so not many updates... Indoor clone got to spend the last 2 weeks of her life in my closet under the quantum boards and UVB. I harvested and washed her buds on 6/28, let her hang dry and weighed and jarred her up on the 4th of July. She came in a 111g of cola and 45g of lower bud with only about 5g of larf. Nice!👍 She smells just like her mommy and has the same uber-dense buds. She was topped, so the buds aren't as mighty as the mamma's, but much more plentiful.👌 Outdoor clones: I had a massive spider mite attack, and during the same week, I had a grasshopper invasion...I lost a few plants, one of which as a FFT1 clone. I had just harvested my autos and my indoor clones from the closet, so I moved the remaining two clones in under the quantum boards. I treated them for spider mites several ways for several days and have given them much TLC. Hopefully their buds fatten up some more. They stanky, but they kinda slim... 7/11: I harvested the last two clones tonight. So sticky!!! I washed them and hung them to dry.
Likes
13
Share
Just look at it. All deformed and shit. Already has a fat stem on it.. maybe the nutes should be toned down? God knows. 4/2. It's like it's growing sooooo many leaves... plain water at end of week. Contemplating defoliating it...