9.7 D85 Harvest day✂️ Last flush 10L Water PH 6.5 EC 0.3 Return PH 5.9 EC 3.4 Very high EC of soil. Above 15% amber. Triochoms at top cola start degradation. Defoliation&wet trim. 23inch tall. No training. 121g wet (but now freaking stems and leafs like people do 😂) 32.2g (73% return)

Setup the 4x4 tent with the new Gavita 1700e LED, self draining saucers, and the auto pumping drain to waste bucket. Topped all 5 plants for the first time.

01/17/22 Everything's starting to grow again from the LST and defoliation at the end of this week flipping to flower. Tested run off last watering it was 2250ppm, did straight water this watering. *Note plant 4 has had hiccups from the start when it popped out of its seed it's tap root was curled I fixed it with tweezers by pulling the skin off and then placed it into the Coco, it shows the most stress out of the 4 plants and does not respond well to anything I do to it, even with 2250 ppm runoff it's still showing signs of a nitrogen dificiency PH in run off at 6.0 so not sure why it's so finicky . It did get the worse light burn out of the 4 , me being a novice at this I'm not sure if early stress ruins the rest of the grow but I'm starting to think it does from past grows and this one. 01/23/22 Just watered plants , the lockout has been fixed that one plants not eating as much as the other three and due to future harvests suggested mixing was way to high 1200-1300 ppm I had to mix by there measurements then weaken it with water till I reached 800ppm. Thank you everyone who post info for me.

Purple really starting to come in, upgraded ventilation system has got my tent down to low 70s they seem to be living it !

Do-Si-dos auto is doing great. She was lollipopped today, and a selective defoliation In the canopy. She is stretching and developing more bud sites as well. Hopefully the stress doesn't bother her. She is ready to flower now. Nothing more to report. Thank you Medic Grow, Athena, and Zamnesia seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Weeks go by ... i use Canna COCO AB, Rhizotonic, Zhymes, CalMag

Hello growers day 49 in the garden with the blue monster she is popping off she is standing at 83cm at the moment she looks very healthy thought I was going to have problems outside but she’s taking it very well loving the zami genetics I’m just going to keep feeding her and let her ride it out staring to get some nice buds starting to form now getting excited can’t wait to try her buds so until next week be safe and happy growing ✌️

Lotta love Barney’s Farm 💚

We start to see the purple ☘️🤩 2.5ec 47day flowering

Another week done

The smells are becoming very strong in my house and truthfully I am still pretty pleased with trichome production although I definitely can tell the wish i had calmag 3 weeks earlier but better late then never about 3 weeks from harvest can't wait for this one been long road but a rewarding one.

Start of week 7, for the Super Lemon Haze, I'm repeating the week 6 feed cycle as she's going for at least one extra week 9, compared to only 8 weeks for the blueberries, before flushing. Last week was good, but the Super Lemon Haze continues to be a very hungry girl. She is very sticky and has a light lemon smell. The two blueberry plants continue to pack on weight and size, they have a very pungent smell and are starting to get sticky like the SLH.

Growace.com aircube only discount code NINJABUDS ELUFAH / Amazon discount NINJABUDS The plants are very close to being large enough to start useing the watering system to water them Black sugar 2.0 is a beast from the start I think it’s gonna be a monster plant

Hermosa planta 😍

This was a fun project that was a few years in the making and a year later to see if they would last a season for this upload to happen. Before any of this I would bike aorund town grabbing up all the old Ikea solid pine bed slats that I could find and storing them in the basement. I have a lot of wood down there, any size worked as long as I have enough of them. The hot days to find them were the first and last of the months because that's when people where moving in/out. I also kept an eye on the free section on local online classifieds as well. The entire purpose of this was to recycle as much off the streets as I could before buying anything to finalize the project. In the end I only bought sealer, screws and some takeaway/beers. All the wood was 100% free and salvaged off the streets of Toronto saving it from the dumpster bin. After collecting all the slats for about 2 years I was playing aorund with them on how I wanted to make this work. I had previously done a little project like this before but I messed it up and the boxes where crap. did not last longer then 2 seasons, they where thin and shallow as well could not grow much of anything in them. I Was talking to my friend who is renovating their house and we brainstormed some ideas on the boxes, I found some designs I liked online and said lets make something like this out of what I have here. We tossed out a few of the design features when looking at them as it would have been wasted wood and extra work not needed. If I had more wood them maybe it could have been an option but simple was the name of the game. They taught me what I needed to know like how the miter saw and sander worked, plus all the other tools I was using. They did help out with a table saw and creating the triangle support joints in the corners, They used some pine left overs they had while making a staircase indoors. I did not feel up to the task of using a table saw given all the relatives I know who have lost a finger to them. In the end we decided the design would be three boards high and take an alternating pattern on corners. layer one short, layer 2 long, layer 3 short. Went with a galvanized and painted deck screw so it can take the weathering. Ran into some problems like making everything level as some of the boards were warped and other ones had undesired aspects like knots and tacky sticker goo I could not remove. So I used them for the base that will not been seen so much. Clamped everything down and called it a day. Once it was all done and over with, I then brought them back home from my buddies work garage and started to seal them. I went with a boiled linseed oil as its a food safe option should the wood degrade into the soil I will plant in them. I will need to reapply it to the boxes year after year but the main coat is the most important one and I put it on 3 layers with a good dry in between coats. the inside of the boxes that where coated did not degrade at all as the sun did not hit them so it will not need a new coat just the outside. Overall the end result was very impressive for myself, I've never taken a woodworking class ever and It was a near perfect outcome for me. Heavy Duty Planter Boxes for all my gardening needs. I made a last min decision to add in a plastic liner to preserve the wood even longer and stapled that into the frame. it has held up quite well and may need replacing end of 2nd or 3rd year out in the sun. Used a thick moisture wrap plastic with UV protectors in its formula. Lets see what I can grow in them this year! m0use's haus of projects - garden box edition

Sproud/ Keimung The Seeds Are Made by myself I Mixed up Paradise Seeds Tangerine Sorbet with Banana OG 2 years ago. Last Year I breeded a male and some females of the New Lady Spider Strain. The Name of this cross. Then i Mixed Cali Genetics Purple Milkshake female with with a Lady Spider Male. The New Strain is called Black Venom. I believe it wil be Blackish/Purple Like The parents. About the Taste, we will know it maybe in a few weeks :) I Hope this 4 Babys Are females.

Start of week 3 is going very well. Plants look super healthy and have responded well the some LST. Watering every other day and feeding with FoxFarm Big Bloom twice a week.

🇩🇪 Alles sieht gut aus 👌🏻 🇺🇸 Everything looks good 👌🏻 🇪🇸 Todo se ve bien 👌🏻