Original Sensible Seeds - Frosted Guava 🍈 🌸❄️ P-K 7-5 Boost 🌺🍭 Enjoy - Week 5 🌸 - 25-26 grad Celsius - 50-55% humidity level - 20l Air-Pot (75% BioBizz All-Mix, 25 % BioBizz Worm Humus) - RO-water (PH 6,3) Sanlight Evo 3-60 100%: about 1100-1300 PPFD Spider Farmer Glow30 12h/12h on

FBA2507 Light mix finito✔️BANG To the guy behind this strain : THANK YOU it's a one-way to the past when I was harvesting peaches in my grandpa's garden👨🏻‍🌾 Once again the quality of the buds 😳!!! In coco she s huge🚀 Same feeding + Green Sensation RoOoOaAaaADDD I've ever been down👻 Take care 💚

Day 8 | Sun. 7/22/18 N/A Day 9 | Mon. 7/23/18 2:30AM 1. Fed with Big Bloom, 5.8 pH RO/DI water 2. Setup time lapse camera for 6AM - 12AM (18 hrs.) (1 shot/30 seconds, 2160 frames, shown at 240 FPS) Day 10 | Tues. 7/24/18 1. Time Lapse Day 11 | Wed. 7/25/18 1. Time Lapse Day 12 | Thurs. 7/26/18 1. Time Lapse Day 13 - Fri. 7/27/18 N/A Day 14 - Sat. 7/28/18 12:00AM 1. Light water with 5.8 pH RO/DI water

Transplant to bigger pots, from 1gal to 5gal

Quick update just to upload some photos, but unfortunately I don't have many relevant news to report. Leaves are yellowing, but I can't understand if it's senescence or lack of nutrients. Since she's not gonna finish within the next 2 weeks, next week I'll add some nutrients in low dosage, which shouldn't be a problem since the runoff is more or less 250 PPMs. This week there are some videos too! 🎥 Day 136: 9L of tap water (PH 6.5). Runoff: PH 6.8, 256 PPMs. Day 139: 9L of tap water (PH 6.5). Runoff: PH 6.7, 245 PPMs.

nutrient change 7/18 had to remove scrog net was too difficult trying to move around their to change it out. Another week of explosive growth almost 2 feet tall already and starting to fill up the whole area already. Switched the light to bloom almost out room to move my light up.

I develop an application that measures the THC levels of cannabis and the result comes from 3 photos of buds... Godfather OG measured relatively well, it also measured other strains such as Fat Banana Automatic, Gorilla Cookies Automatic, Northern Lights Automatic,White Widow Automatic and Gelato Auto... See how it works in the video THC Meter... ----------------------------------------------------- Day50 : ----------------------------------------------------- Day air temperature: 28c Night air temperature: 24c Air humidity: 46% No Watering ----------------------------------------------------- Day51 : ----------------------------------------------------- Day air temperature: 27c Night air temperature: 24c Air humidity: 39% PH : 6.4 Watering : 0.4 l Bio Bloom 1 ml / l ----------------------------------------------------- Day52 : ----------------------------------------------------- Day air temperature: 27c Night air temperature: 23c Air humidity: 43% No Watering ----------------------------------------------------- Day53 : ----------------------------------------------------- Day air temperature: 29c Night air temperature: 25c Air humidity: 39% PH : 6.4 Watering : 0.4 l Bio Bloom 1 ml / l ----------------------------------------------------- Day54 : ----------------------------------------------------- Day air temperature: 30c Night air temperature: 26c Air humidity: 45% PH : 6.5 Watering : 0.4 l Bio Bloom 1 ml / l ----------------------------------------------------- Day55 : ----------------------------------------------------- Day air temperature: 30c Night air temperature: 26c Air humidity: 38% PH : 6.4 Watering : 0.4 l Bio Bloom 1 ml / l ----------------------------------------------------- Day56 : ----------------------------------------------------- Day air temperature: 28c Night air temperature: 24c Air humidity: 40% Flushing Before Harvest

For this grow I've used, For the growth 1 sf1000 2 fan 15w 1 extractor 150mm 350m3/h 1 carbon filter 150mm 1 Hydro Shoot 60x60x140 1 timer 1 thermostat Heating system for the winter month To start pot 2l, after 8l 18 Hours On, 6 hours off light For the soil I've used plagron light mix and rqs pellets. For the blooming 2 sf1000 2 fan 15w Extractor + Filter 150mm 1 Lite 60 box 2 timers 4 RQS Fabric Pot 15l 12/12 Plagron batmix + RQS Pellet After harvest, I'll not use my usual carton dry, last time I've got mold on few big buds, si this time I've put the stuff in a room with 15w fan (see video), Thanks for all my friends! And again thanks to RQS and @James

The pistils are starting to brown a little so we're nearing the end, but this is not a September finish! Colas and bulking up I think she's had her last feeding. For awhile there I was worried about how this strain was going to finish but in the last couple weeks she's been really strong. I can't wait to see how she looks on harvest day!

7/1/23 - Day 19 I do water changes weekly. The new weeks start off with a water change. Water changes always scare me, it's the mixing of nutes and balancing the PH. It sounds easy in theory but in practice you want to interfere with the PH asap. But I was able to let the LEAF box empty the water, I filled it up with RO water, LEAF then dosed all my nutes. After that i came in a PH balanced it. (PH balance is something LEAF will be able to do, but there was a bug in the software so instead of having LEAF dose the PH i decided to do it manually for now. The Roots are INSANE! I bet by time I'm done there will be 1+ gallons of water displaced by the roots. I almost started cutting her lower leaves at the base, but I decided to let them grow for a bit. If they grow out some more i will be able to scrogg them and then cut the leaves below after they are trained up a bit. The lights have kicked on and everything looks in order. The plant looks great too, she might be in a small amount of WTF because of all the PH changes but i think the drastic changes were kept to a minimum. She looks happy. As always ill update you tomorrow. 7/3/23 - Day 21- I trimmed some of the lower leaves on the bottom, I'm leaving her bushy still, I won't want to cut any more branches if I can, I need the branches from the bottom to reach the sides of the Scrogg net. In the next couple of days being apple to Scrogg and stretch her while Shes still moldable. 7/5/23 - Day 23 - I added some training lines to some of the branches. I need them to be as spread out as possible going into the Scrogg net. I'm a big fan of not trimming too much as she grows. I don't mind there being some foliage down below. I will cut as needed if it looks like the lower areas are sprouting too much of the little leaves, but for the most part, I let nature do its thing. She's drinking a ton of water now. I am getting my RO water dropped off by the five gal loads. I just got the membrane for my RO150 unit that I plan on having up and running within a couple of weeks so I can start making my own water. 7/6/23 - Day 24 - I added a picture of my RO water setup. It cannot be set up permanently, so this was a great solution. You can see how I was able to tie my branches down, next time I will drill a few holes on the side of the pot. This is a great solution for anyone looking to Scrogg and manage the vertical height. Also, you can see on the top branch there was some pulling, so much so that it started to pull the plant and it created a small lump. All good but just goes to show how pliable these plants are. Looking good and I'm excited for the next couple of weeks! If you are looking for this experience check out https://www.getleaf.co/

Zdravím.Dnes 49. den květu.Tak mi to nedalo a i když jsem nechtěl,holky šly na focení a prohlídku ze stanu.Neni to prdel je tam pak naskládat nazpět,člověk tam dá dvě a říká si kam s tou třetí.A stalo se to čeho jsem se bál,dvě větvičky jsem zlomil,takže si nechtěně zkusím i supercropping.Ale už je to dva dny a větvičky vypadají živě,takže myslim že to rozchodi.Jinak vše ok a pomálu se blížíme ke konci 💚Za týden na viděnou ?

Partially drained the tank at the start of the week and topped up with ro water and 1ml of final solution per Litre. Last 2.5 days were in darkness. I trimmed the majority of fan leaves before hanging up to dry in the tent today. Started out trimming with the plants in the tent and soon realised it would be much easier to just cut them down whole, hang them upside down outside the tent and trim them up a bit. I have a small dehumidifier and a small fan heater setup in the tent and they have been keeping a humidity level of about 60% and a temp of 16 Celsius for the last few days while the lights have been off. I figure that's a good starting point for drying and I can increase the temperature if needed, that will drop the humidity also. Intake fan at the bottom and extract fan at the top are running constantly as they have been since the grow started (low power 4" fans). I might add back in a fan for circulation depending on how the drying goes, or maybe even trim or hang the plants better to get more airflow around the buds

Light feed day 8. Day 12 I'm happy with the growth so far, I'm feeding maybe half a liter every couple days. Dumped a liter of water in the saucer to bottom water. Day 14, split a gallon of feed between the 3. Very happy at the end of week 2

Je me lance dans l'expérience du topping sur ma nouvelle plantation de cannabis. Bien que cela ne soit généralement pas recommandé pour les variétés automatiques, j'ai remarqué que de nombreux blogueurs le pratiquent. Après avoir obtenu de mauvais résultats avec la technique de LST (Low Stress Training), je me suis dit que je ne risquais pas grand-chose. Pour l'instant, je ne remarque pas de ralentissement significatif par rapport au LST. Cependant, lors de mon premier arrosage avec des nutriments, j'ai mis un 8e de la dose recommandée, ce qui a entraîné l'apparition de griffes sur les feuilles... Vraiment déconcertant, je cherche encore à comprendre cette réaction... Topping au 16 ème jour, 5eme noeuds. Engraissage : 1/8 de la dose et apparition de légères griffes sur les feuilles Merci de m'avoir lu 🌱

We don't hide behind a finger, nor behind a rolled joint nor behind anything, the Permanent Marker is the strain that has the most Hype at the moment in a few years and we also expect a lot from this one from Zamnesia. The cover of the seed pack alone is something spectacular, it seems to have been made by the best Street Writers. I know he is a master of Tattoo but here I see at least a minimum of past in Writing, in the hip hop sense of the term. If you only look at them a week ago it doesn't seem true, but when the plants start, they go and the Permanent Marken go like a rocket. In this diary you will find the plant worked with the techniques in this case the first topping was done, we cleaned everything else creating the Mainfold and we are going to work everything with the main lining. We are at the first topping and we have two mini branches growing. The other one you can find in the diary next worked without the application of techniques that involve cuts to preserve its speed. The comparison is the salt of the experience. We have started the Plagron fertilization program, we are in 100% organic configuration, the soil is recycled Promix + 1/3 fresh soil + 10% Perlite + RQS Mycorrhiza Mix (4gr in the mix, 1 gr under the small fiber pot). We are administering // 1 ml/l of Power Roots - 1 ml/l of Pure Zym - 1 ml/l of Sugar Royal - 3 ml/l of Alga Grow I have doubts about the compatibility of Pure Zym with mycorrhizae. If in doubt, ask the experts, don't mix too much at random. https://plagron.com/en Doubts about Pure Zym / Mycorrhizae compatibility have been dispelled, they can go well together according to Plagron experts. If someone tells you that enzymes eat mycorrhizae, which in principle may seem possible, explain to them that it is not true. https://www.royalqueenseeds.it/growing/452-easy-roots-mix-di-micorrhize.html Try this variety, it is a top strain of recent years very high level of thc ---- // https://www.zamnesia.io/it/12508-zamnesia-seeds-permanent-marker.html Brief description of Zamnesia // Here is a good opportunity to enrich your genetic library with another award-winning variety: Permanent Marker was crowned Strain of the Year 2023 by Leafly, thanks to its intense aromas, high levels of THC and its physical vivacity. Originally created by JBeezy and Seed Junky Genetics, our team managed to secure a cutting of this modern top cultivar, so you can grow it comfortably at home, whether indoors, outdoors or in a greenhouse. Permanent Marker fits perfectly in any environment! You can find the whole world of growing on Zamnesia and much more, take a tour of the site and you will find "all the best that nature has to offer" in various shapes and colors. The new strains are exceptional and the old ones are no less... p.s. for now zero Hermaphrodites, growers can you say the same? ---- // www.zamnesia.com

Day 28 from sprout, these girls are looking healthy and loving life...as far as I can tell. Topped them back on Monday 1-22 and then did my first top dressing today with some gaia green all purpose 4-4-4. some glacial rock dust and alittle mineralized phosphorus. Been staying at 6.5ph for all waterings

Divine Seeds Auto V.2 Contest Big Demon Auto W5V5 7/6-12 Big demon auto is stacked close together. I think there were 5 or 6 nodes so I topped her and used pins to tie down the limbs. I also lollipopped and cleaned out all the under growth.. She is 6 inches tall after topping. Giving water only for this grow. 7/6 2 liters ph 6.5, ppm 238 to get the pot wet. 7/8 1 liter ph 6.6, ppm 262 I included videos of the ph meter with water, iridium glass & iridium glass and copper. When in water only, the ph meter climbs steadly, in iridium, there is slight jumping in the register. When the readings are taken with copper and iridium, the ph meter jumps up and down in wide ranges. So there is marked energy emanating from the glass and from the copper. What is it doing? I don’t know but stay tuned thru the grow to find out. As aways, thank you all for stopping by, for the likes and most of all growers’ love and support. Stay green, growers love 💚🌿o 💫Natrona💫

Flushtime... 😃 last week started and I will flush them for 4-5 days. Dont want to change water 2 times a week Trichomes and buds looking good. Next week harvest 👊😋

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.