In questa settimana ho iniziato ad impostare gli steli nella rete, che sostituisce in parte le clip e consente l’espansione dello stelo andando a coprire il suo “quadrato” all interno della rete. Pulizia completa di tutto quello che si trova al di sotto della punta dello stelo in modo da favorire in nutrimento alla sola testa. Un altra settimana di attesa, il tempo che si allunghino gli altri steli ed arrivino più o meno tutti a livello e si procede con lo switch a 12/12 per partire con la fioritura (l’impostazione della lampada è ancora a 400w di potenza )

This week we start with some LST... The second Runtz didn't make it, so I've thrown it away now.

Another week closer to the finish line and the Chicken N' Wafflez continued to mature beautifully. Temperatures remained stable at 24°C during lights on and 20°C at night with a steady 50% RH, creating a comfortable environment for late flower development. 🌱 The most noticeable change this week was the continued increase in resin production. The buds and sugar leaves became even more coated in trichomes, giving the plant a frosted appearance from top to bottom. ❄️ The fade also progressed significantly, with deep purple tones spreading across much of the foliage and adding a lot of visual appeal. 💜 Bud development continued as well, although the flowers seemed to stack more vertically than expand outward. While they did gain some additional mass, the most obvious change was their increased length and structure rather than overall width. The main cola especially continued to build upward and now stands out as an impressive spear-shaped top. 🔥 Feeding remained very simple this week with only water and CalMag. Water consumption stayed consistent, showing that the plant is still actively transpiring but has likely entered the final stages of maturation. 💧 The aroma profile is becoming more defined. Alongside the sweet jam-like notes, a subtle spicy character has emerged, backed by a light gassy undertone. The combination creates a rich and unique scent that becomes more noticeable every day. 🍯 Trichome development is progressing nicely, with the majority now appearing milky while a smaller portion remains clear. Harvest is getting closer, but there is still a little room left for the plant to finish ripening. ✨ Overall, Week 12 was defined by increased frost, stronger colors, continued bud stacking and steady maturation. The Chicken N' Wafflez is looking healthy, highly resinous and is shaping up to be a very attractive late-flower plant. 🌿

Woche 5 Der kleinen geht es blendend, die einzelnen Triebe haben ordentlich an dicke zugelegt und langsam kann mit dem training begonnen werden. Tag 29 Die 6 Triebe werden gleichmäßig in 60° zu einander verlegt. Tag 33 Ein Tag Ruhe 🐦 Tag 35 Leider beim Training ein Ärmchen abgebrochen, jetzt müssen es halt zwei neue werden.

DAY 33 Vandaag ben ik begonnen met bloei voeding. De plantjes zien er goed uit. Zou het verstandig zijn om wat bladeren te knippen ? graag hoor ik jullie mening alvast bedankt.

@ 1.4-1.6 kPa Feels like she is developing her buds pretty slow for 8 week flower strain likely gonna need 2-3 weeks I would guess in my case.

#seedsman420growoff and #SeedsmanSeeds 📆 Week 5, 25-31 May 2024 25-27 May - Observed and let the plant grow. 28 May - Defoliated plant. 29 May - Placed scrog ring on trellis system, bent top of plant over 90 degrees, adjusted and spread branches (see pictures). 30-31 May - Observed and let the plant grow. 📑 I’m very pleased with the way this plant has responded to the nutrient schedule so far. Now it is time to see how she will do with training. I like using a version of the scrog method most because it gives me the greatest space for bud growth overall. My experiences have taught me that under these lights there is about 15-18” worth of quality vertical bud potential. Anything below that line is only draining on the plant, and not receiving adeqate DLI. So I dont need to focus on a tall plant - rather a wide one. Now that she is under a scrog the DLI has a significant canopy increase. What I’ve done with this plant is cut all side shoots off the main branches up to the scrog. She will grow for another week to allow all for growth to develop just above that and then be flipped to flower. I’ve never grown this plant before, but assumeing she can double her size during pre-flower, I’ll have plenty of room in my grow tent. The Trellis System: is made with 1/2” (12.7mm) white, SharkBite PEX, 1/2” pex clamps, small screws/nuts #6-32 x 3/8 in (to hold clamps opposite each other, this is what holds the structure together, side bars, rings, scrog), 1/2” pex straight coupling connectors (to connect rings, and extensions), nylon tape and nylon cord. The frame design is independant from the bucket and can be put on anytime before or after the start of the grow. It simply snaps together (nothing needs to be crimpted), the rings stay in tact with coupling and tape, the netting is strung once for the most part, I prefere 2” squares, and held in place by clamps. The size of the rings depends on the size of your pot, the bottom and top ring are measured seperately. The scrog ring is determined by the size of the tent or desired spread. It takes 5 side bars evenly spaced apart and snapped on the bottom ring 1st to hold the frame sturdy in place, their length should start flat from the bottom to about 8” above the top of the bucket. Place the pot into the bottom ring with 5 side bars already attached, lift up the bars, then put on and attach the top ring, this prevents it from moving. Both are then placed on a 12” Bonsai turn table for easy access and observation of the plant. The final scrog is placed on when the desired height is close to being achieved, then maneuvered down over the plant. A simple design that allows you to easily adjust the netting (place extenders on side bars faceing in opposite direction for additional height) and opens many other possabilities for training. See pictures for an example. 🍶 25 May nutrient solution changed 🍽️ 25 May feeding schedule updated 💧 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient Solution EC 2.3 at 73 degree F 🔆 Light power at 60%, DLI 30-35 canopy coverage at 18hrs 😤 Using General Hydroponics, HGC728040, Dual Diaphragm Air Pump, 320 GPH That is it for this week. Thanks for the look, read and stopping by.

2nd topped on day 20 and she is reacted well to HST, she is too busy with growing, there is no time to get stunted. I give her 1/3 of the feed schedule’s recommendation. Soon I will switch to bottom feed. DLI has been set to 30. Day 26 - today I installed the Megapot system. She has been transplanted from a 5 gal bag to a 6 gal one, it was quite a torture I must say. More stress for the plant. I had to do this for the better drainage. Was it a stupid move? We shall see.

Una planta que necesita bastante tiempo para madurar, tiene un olor dulce y afrutado con toques citricos y unos tonos a melocotón. Le ha faltado luz durante las primeras semanas y eso ha influido en el resultado funal.

Loving the frosty look of this canopy, there's buds everywhere. I think she may have been over trained though. I've thinned out a few tops that were never going to come to anything and this weeks pics are the results. I can see at least 20 tops on this beast. Some real nice development going on!

Que pasa familia, vamos con la cuarta semana de vida de estas F.U.H. feminizadas de Seedstockers. Vamos al lío, las plantas se trasplantaron a macetas de 7 litros. El ph se controla en 6.5, la temperatura la tenemos entre 24/22 grados y la humedad ronda el 70%. El ciclo de crecimiento puse 20h de luz, el foco está al 50% de potencia. Me gustaría estar más encima este cultivo pero la salud me está impidiendo un poco este 100% con el proyecto. Con suerte la semana que viene andaré mejor. - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨

One of the targets for that grow is to keep the height of the plant as low as possible, because i only have about 80 cm from the bottom of the box to the LED lights as available space for the plant, so i thought i will a give that LST a try. Additionally i slowly started incresing the power of the LED to 60%. By now (a few weeks later) I already know that i started the LST a little bit early, but the plant was reacting well and kept growing. Furthermore I added a cheap webcam to my setup to create some timelapse videos. It's not a high res camera, but I still find it very interesting to watch that plant grow in timelapse 😁

Ich habe mich heute schon zum Ernten entschieden und habe sie jetzt zum Trocknen aufgegangen 😄

Ende der 9 Woche Growmies! Der Frost und Geruch sind phenomenal. Die Entscheidung den Mainbud zu entfernen war wegen dem Mangel an Platz optimal wenn man sieht wie groß sie geworden ist!

Now that the plant has started flowering, I defoliated the excess leaf, focusing on apical buds. But unfortunately after defoliation and pressing the lst unfortunately plant b5 breaks the stem in its main apical bud. I was very sad but in life we have to learn from mistakes and stop complaining since the other 4 plants show good growth and vigor we will move on trying to minimize the errors.

Alaskan Purple auto is doing okay. She broke her top when she grew against my lst from last update. She is under a Medic Grow Mini Sun-2. Beside the top breaking everything else is looking okay. Thank you Medic Grow, and Seedsman. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Get ready for a fun and informative update, including the training techniques i am using to shape our Tangie into a true ninja warrior! Our Tangie has been flourishing with energy and vigor, showcasing her ninja skills at every turn. With each passing day, she grows taller and stronger, reaching for the sky like a true botanical ninja. Her vibrant green leaves are a testament to her health and vitality, shimmering in the grow room like emerald blades of a ninja's sword. To help guide our Tangie's growth and maximize her potential, i've employed the art of Low Stress Training (LST). Picture this: we're like plant whisperers, gently manipulating her branches to create a symphony of growth. Through the technique of leaf bending, i encourage her branches to spread out, creating a wide and even canopy. It's like teaching her the ancient martial art of flexibility and agility. By skillfully bending and tying down her branches, i ensure that each bud site receives an equal amount of light. This training technique not only promotes better light penetration but also encourages the growth of multiple colas, leading to a higher yield of resinous and potent buds. Our Tangie is like a ninja warrior, adapting to her environment and maximizing her potential with every training session. But training isn't limited to physical techniques alone. I am also nurturing our Tangie with the perfect balance of nutrients from Aptus Holland. Their specialized formulas act as her ninja fuel, providing her with the essential elements she needs to grow strong and healthy. With each nutrient feeding, she absorbs the power of growth and development, inching closer to becoming a legendary ninja of the cannabis realm. Of course, light plays a crucial role in our Tangie's training regime. She thrives under a PPFD (photosynthetic photon flux density) of 500, bathing in the intense glow of her training camp. These photons are like her training partners, pushing her to optimize photosynthesis, grow denser foliage, and develop the building blocks for future bud production. With each photon absorbed, she becomes a more formidable ninja warrior. Creating the ideal environment for our Tangie is essential for her training success. She prefers a cozy temperature range of 27 to 28 degrees Celsius, providing her with the warmth and comfort of a tropical paradise. With a relative humidity level of 60 to 70%, she thrives in the perfect balance of moisture and freshness, creating an environment that supports her ninja-like growth and training. Before we conclude, let's give another shoutout to Dutch Passion, the master breeders behind our Tangie strain. Their dedication to crafting top-notch genetics has allowed us to embark on this incredible journey. I am forever grateful for their expertise and commitment to the world of cannabis cultivation. So let's continue this thrilling adventure with our Lego Ninja Tropical Tangie Run. Embrace the power of LST and leaf bending as you shape your plants into formidable ninja warriors. Remember to provide them with the right nutrients, light, and environment to support their growth. May your gardens be filled with the spirit of the ninja, and may my Tangie's training lead to an abundance of resinous and flavorful buds. Stay tuned for the next update, where we'll unravel more tales from the captivating world of our Tangie. Until then, keep training with passion, harness the power of LST, and watch as your plants transform into stealthy ninja warriors. As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and blessed with you all in my life<3 <3 <3 #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #dutchpassion #dogdoctorofficial #legoninjago #growerslove 
 With true love comes happiness <3 <3 <3 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3 <3 <3 Friendly reminder all you see here is pure research and for educational purposes only <3 <3 <3 Growers Love To you All <3 <3 <3