Likes
Comments
Share
Starting the second week of flowering, first day! And they are beautiful. This week was crazy! They started producing fruit earlier than I expected, and with good shape and resin, they developed really well!
Likes
36
Share
@Roberts
Follow
Was great till hplvd destroyed my prior photoperiod run, and got transferred over to this one. So destroying this run today as I have met my Spider Farmer contract date. I can now clean and start over. I will be back. 👍🏻 Thank you Spider Farmer, and AMS. Www.amsterdammarijuanaseeds.com Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer G300w: https://amzn.to/3S2zvsd Spider Farmer 10X20 Heat Mat Kit - https://amz.fun/lsa0J Spider Farmer Amazon Store: https://www.amazon.com/spiderfarmer Spider Farmer Official Site: https://spider-farmer.com Discount code: saveurcash
Likes
2
Share
Soaked the seeds in distilled water for 15 minutes. After I put them on wet cotton pads and sealed those in Mylar bags. I placed those bags on top of my radiator. I made sure it is not running too hot. I don't really care about yield; I just want to do a little project inspired by a YouTuber called Weed in a Pot. I just want to see if I can bring it to the next level with this setup. I already switched out the light for the newer evo dimmable version since it was to strong. Also drilled a few more thicker holes in the bottom for better cold air intake.
Likes
10
Share
@Borberad
Follow
Woche 6 Tag 36 Die Topffläche ist weitestgehend ausgefüllt. Es wird umgestellt, nicht nur die Zeit sondern auch physisch. Das Blümchen wandert aus dem Keimzelt, was diesmal auch Veggizelt war, in ihr Blütezelt. Da beide Zelte zeitversetzt laufen, wird die erste Nacht auf etwa 21h verlängert indem sie in ein unbeleuchtetes Zelt zwischen geparkt wird. Anschließend wird im üblichen 12h Takt beleuchtet.
Likes
13
Share
@Dunk_Junk
Follow
Week 10 done!!! She is getting frosty!!!! Trichomes are going crazy this week. The only input from me this week was to water/feed her.
Likes
19
Share
Week 1 Day 1 - 8/12/2023 1st Water change Day! Such a special time it is when you remove the little bit of Nutes that you gave them as an appetizer and you give them their first real meal. Added 39 Gallons of Water to my system SILICA= .5mil/Gal = 19.5 = 20mil Root Drip = 1mil/Gal = 39mil Cal Mag= .25mil/Gal = 9.75 = 10mil FLoraMicro= 3.0mil/Gal = 114mil FloraGro = 2.0mil/Gal = 78mil FloraBloom = 2.0mil/Gal =78mil ORCA= .5mil/Gal = 19.5 = 20mil Week 1 Day 2 - 8/13/2023 Everything is looking good the roots are making thier way to the water and the new grow is looking nice and green. Week 1 Day 3- 8/14/2023 Everything is right on track, they are looking beautiful and in the praying postition all leaves happily lifting towards the light. Week 1 Day 4- 8/15/2023 Looking beautiful today and looked like she could use her first haircut.. gave her a TOP off. Roots are laying in the water everything is looking right on track.. Week 1 Day 5- 8/16/2023 walked in and the humidity was under 60.... ohh noooooo.. So I added 2 humidifiers to the tent and attached them to my InkBird controller which is set to 62. She had roots nicely in the water.. this grow is on!!! Week 1 Day 6- 8/17/2023 Humidity was a little low this morning, so I refilled the humidifiers. Other than that, the temp looks great, the PH looks great, the PPM looks good the plant is in the praying position and all damage from the little drowning seems to have been fixed. Happy Happy. Week 1 Day 7- 8/18/2023 Yay.. week 1 in the books, roots in the water growth has started first hair cut given and both side nodes are growing. Everything is looking good and on track.. A lot better than week one of the last grow when I had them drowning week 1. Really excited on how this grow is going to come out.
Likes
10
Share
Hallo zusammen 🤙. Das war es für sie wir sehen uns in 3 Wochen wieder.
Likes
8
Share
It's Day 54 Week 08 0f Flower For My 02 Kombucha Cream by atlasseed . And For My Snow White and SpliffStrawberry by Spliff Seeds Amsterdam . So Today I Started My Day By Checking My Tricomes On My 2 Kombucha Cream. The 02 Where Looking Fully Milky So My 02 Kombucha Cream Got Flushed TODAY with Some Flawless Finish by Advanced Nutrients . The 2 Received 80ml of Flawless Finish mix with 1OGallons Of Water Ph at 6.0. Tomorrow they will get Rinse off with ph balance water. Yesterday I watered my Snow White and SpliffStrawberry Ppm where down to 100ppm. All 4 Plants will get a nice ice bath in a few days. My plan is to check the Tricomes on the SpliffStrawberry In a few more days she was still Milky when I check her yesterday. I will chop her down next weekend. And the rest will get the chop at 30%Amber Tricomes. Happy Growing Growmies 🤘🏻
Likes
9
Share
@garchol
Follow
Getting closer but not quite there yet. Still looking for some more amber trichomes. At least the clear ones are becoming fewer while the amount of white ones raises. Buds are very thick now and the smell is amazing! After the daily trichome check the magnifying glasses smell deliciously sweet and creamy like blueberry ice cream. Gonna leave her in her normal light cycle until I‘m happy with the trichomes.
Likes
4
Share
@DE_BW
Follow
The plant continues to develop beautifully and is clearly hitting its stride now. Buds are visibly stacking and gaining density with every passing day. The fruit aroma is absolutely incredible, smelling intensely like fresh apricot jam and filling the room instantly. A real highlight is the stunning pink coloration, which is now spreading steadily from the top buds downward. Overall, this run is shaping up to be something very special.
Likes
9
Share
Had them veg somewhere else 1st days in tent
Likes
8
Share
She is so beautiful!!! Smell amazing
Likes
10
Share
week four flower everything looks fine so far :D I water them with 1.5l every 48h the light I use was set to 100% and it hangs 80cm away from the tops
Likes
51
Share
@Waveform
Follow
Once again, this week starts where the former one ended. With the exception of all the cables you can see in the first picture. I dared to install a minimalized version of the Raspi control only controlling the self-built humidifier and one blower/fan combination. I was very pleased to see how easily the simple diffusor can hold optimum VPD as long as temperatures are high and humidity tends to fall below optimum VPD. A single 10 seconds evaporation can hold the level for about 2–3 minutes. I am not pleased to see the Monsanto blowers rather underperform. It’s impossible to reduce humidity or temperature with both running on full speed, while a lifting of the tent door will bring immediate changes. With the Raspi/Arduino success so far*, I am thinking about using old Power Mac fans which are WCM controllable and use 12 V. At least one to increase air intake, and maybe even the blowers. * It wasn’t any problem at all to have the Arduino collect CO2 and soil moisture data, so after some more cable manufacturing (aka helpless soldering), I could extend the Raspi control. I’m still uncertain about the camera module (@trelorny impressed me with his time lapse videos). I don’t want to put the hardware into the tent with its not so electronics friendly climate, already risking some rare outages of the temp/hum sensor. But the camera module cannot be placed far away. So maybe I’ll use the 3A model I own as a spare part as a camera driver. Any maybe, if it works, invest in a better camera module. Mine is generation 1. Oh, and the ladies! Gave them slightly fertilised water yesterday, and even it or the better VPD yesterday or a combination of both make me believe bud growth is a bit more visible today. The smell in the morning when I open the tent to release accumulated humidity is outstanding. They were already thirsty on day 57 again, so pure RO + a bit of tap water until it spilled out of their pot’s bottoms. Many fan leaves turning autumnally now, and the smallest Sherbet suffered a bit from over-fertilisation as I wrote. But it this stage I don’t go for leaf beauty anymore. Just another learning: Don’t use differently sized pots anymore. Hard to feed them individually this way. VPD was mostly in best range yesterday, and I have the feeling it really supports their bud growth. I added an "Evening time" option to my Raspi control that allows the humidity to sink a selected time before lights shut down. That made it possible to have humidity in best range for most of the night time too. They were even dry again on day 58 morning. Another time just water. The blowers cannot cope with the flowers’ smell anymore, and so sometimes my flat cannot hide who shares it with me. Day 60 presents me with a problem: I’ll leave on Friday for a few days. Considering the microscope pictures are not from the tops buds: Would you say it’s safe to give them another week? Problem solved on day 61. Only clean water from now on, and next week will be their last. You won’t see any new pictures for some days now. Me too … Something I wanted to share with you before I leave: I just finished to update my grow box control with a new PWM fan hat that keeps the Raspi cool, while at the same an infrared sensor can now measure real leaf and additional ambient temperature. Setup is much cleaner and more robust now, but I wish my flux would not make the solder stick to the tip of the machine instead of making it flow and stick at the tiny tiny spots I have to hit …
Likes
18
Share
@ODNTrick
Follow
Cut the little Canuck on day 75 before dawn and placed in tub of clean water for 4 hours to remove debris. Then hung under a shady tree to dry excess water. Very dry breezy day. By evening I weigh it at 168 grams stem and all. Then hung upside down bag open to dry. It was beginning to wilt after 48 hours... hopefully long enough to break down some carbs. I’ll be checking every day an if rain threatens I’ll put in shed. Hope to trim and bag in shed after 7 days to finish drying. Pyramid is ready to cut. It will get the same treatment. I know this is a little unorthodox and a bit risky getting the plant so wet before drying. I feel like it just gives the plant an extra day to use up any nutrients and break down those starches.
Likes
32
Share
•She was started for fun. •Not much to say about her just letting her do her. •Week 3 fead her with 2ml off grow auto from living Soils.
Likes
38
Share
A lot going on this week!! Feeding 3 quarts every Sunday and Wednesday at this point. I did a light defoliation on Monday and did a more thorough defoliation on Friday! I opened up a lot of bud sights and it shows in the pics from late in the week!! I just turned the fan and carbon filter on. Temps are currently holding at 73-74F and the humidity is between 43-45%. I'm very happy with that! I hope to keep them both happy!! Enjoy!
Likes
50
Share
@Hou_Stone
Follow
👋 Here I am with 5 Nori cake seedlings, I want to grow 3 plants of this variety, I will keep the prettiest seedlings and continue the adventure with them🙏🌲 After a short week of growth I place my seedlings in their final 7Liters pot with a mixture that I made. I use unfertilized soil as a base. And I add organic nutrients from GreenHouseFeeding that I mix at the top of the pot (35Grams BioGrow 14Grams Biobloom) Then I water each pot with 1L of water. I use tap water. I lower the pH and sometimes add a little BioEnhancer😘 My Instagram 🌱❤️️ : https://www.instagram.com/hou_stone420/ ------------------------------------------ Equipment used : Light FC3000 Mars hydro. power 25% at 30cm Extractor 6 inch Mars Hydro. power 1/10. ON 24/24h No other fan this week Heating mat Romberg 95x95cm. ON half an hour every hour 👌 ☄️🌠🌠🌠🌟 Have a nice day buddies, thanks for your visit 🤩👋