Likes
Comments
Share
@Alvareas
Follow
Der Grow: Die Pflanze hat nachdem Umtopfen, erst einmal die Blätter, etwas hängen lassen. Dieser Zustand, in dem es auch kein sichtbares Wachstum gab, hat 3 Tage gedauert. Danach hatte sich die Pflanze vom Umtopfen erholt. Die Blätter haben sich langsam aufgerichtet und eine matte Dunkelgrüne Farbe bekommen. Am 4 Tag nachdem Umtopfen, wurden die untersten Triebe samt Blatt entfernt. Am vorletzten Tag der Woche, wurde nach den vierten Nodien, getoppt und die untersten Triebe, samt Blätter, erneut entfernt. So das am Ende 6 Hauptriebe übriggeblieben sind. Diese werde ich vermutlich, noch einmal toppen, zu einem späteren Zeitpunkt und dann mit 12 Trieben in ein Scrog Netz gehen. Das toppen hat die Pflanze gut verkraftet. Einen Wachstums Stopp konnte ich nicht feststellen. Das Cover Crop wuchert mittlerweile auch ganz ordentlich und muss regelmäßig zurückgeschnitten werden. Die Luftfeuchtigkeit wurde zum Start der Woche weiter gesenkt und die LED auf 20% Leistung erhöht. Die LED hängt 40cm entfernt von der Pflanze, sodass 350 PPFD bei der Pflanze, ankommen. Ich lasse die Pflanze jetzt langsam zur LED wachsen, sodass sich die PPFD, langsam erhöhen. Die Parameter in Woche 3: Controller Einstellung Tag: Advanced AI Luftfeuchtigkeit 60% - 70% Controller Einstellung Nacht: Advanced AI Luftfeuchtigkeit 55% - 65% Durchschnittliche Tagestemperatur: 26,7 Grad Durchschnittliche Nachttemperatur: 23,3 Grad Durchschnittliche Luftfeuchtigkeit Tag: 65,2% Durchschnittliche Luftfeuchtigkeit Tag: 60,4% Durchschnittlicher VPD Tag: 1,0 Durchschnittlicher VPD Nacht: 1,0 LED Leistung: 20% = 95 Watt Beleuchtungsdauer: 18 Stunden Umluft: Stufe 1 oszillierend
Likes
11
Share
@KobraCut
Follow
Musste Blätter entfernen , weil es viel zu viel wurde. Bisher bei beiden Pflanzen noch kein starker Stretch.
Likes
21
Share
@Bncgrower
Follow
In the penultimate week, the buds are dense, resinous, and most of the trichomes are amber. The smell is surreal; I believe this will be a very significant harvest... In these 15 days before harvest, I start watering only with RO water and a pH of 6.2. At the beginning of the last week, and around 3 days before harvest, I flush with RO + Cleanse 10mL.
Likes
Comments
Share
@gr3g4l
Follow
Esta semana podemos empezar a diferenciar claramente la formación de cogollos de unas u otras variedades. AMARETTO TARMAC Fruto del cruce entre Amaretto Sour y Apollo Black Cherry, esta genética de dominancia sativa promete un efecto de altos vuelos, cerebral y estimulante, que despierta la creatividad. MACK&CRACK The Mac (AKA Mac1 AKA miracle alien cookies) x Green Crack . De las pocas genéticas verificadas independientemente con más del 30% de THC.
Likes
1
Share
just filling up nutrient solution, adjusting light and took some small leafs away. Easy grow until now. Hope it stays this way and getting a nice purple pheno. Ordered a fan to get some air movement inside the tent. When the leafs lay on top of each other you get wet spots. Hope it arrvies soon. Update 27.06 Fan arrived and also Plagron Green Sensation and Power Buds. Used 1ml/L. Will Change the whole solution next Weekend. ————————— Deutsch Nur Nährlösung aufgefüllt, Lampenabstand geregelt, ca 35cm und ein paar kleinere Blätter entfernt. Düngeschema wie bisher. Bis jetzt läuft alles glatt, hoffe bekomme nen schönen purple Phänotyp. Einen Clipventilator bestellt für ein wenig mehr Luftbewegung wenn die Blattmasse zu dicht wird und aufeinander aufliegt. Es bilden sich dort sonst feuchte Stellen. Hoffe der kommt morgen wenn DHL es nicht vermasselt. Update 27.06.: Ventilator ist da und dazu Plagron Power Buds und Green Sensation, 1ml pro Liter direkt in den Eimer gegeben. Tausche die gesamte Lösung nächstes Wochenende.
Likes
3
Share
@cost420
Follow
Week 16: Purple on the buds and underneath the leaves, with a smell of gelato X milky cookies.
Likes
78
Share
Thanks for stopping by.. Please hit the like button if you like what you see and ill be sure to check you out too Growmies 🌱 First of all would like to give a BIG shout out to my sponsors for providing me with the necessary items for this grow 👍 🌟🌟🌟🌟Mars Hydro FC4800🌟🌟🌟🌟 Powered By Samsung LM301B Diodes: The Mars Hydro FC 4800 480-watt LED grow light is installed with high-performance Samsung LM301B chips, the top-bin horticultural diodes, to provide a high Photosynthetic photon efficacy efficiency of 2.85 μmol/j and a long-lasting color rendering capability, supporting indoor plants to grow and thrive. High PPF Output and Uniform Light Distribution: FC4800 provides a high PPF of 1,366 μmol/S. The multi-light bar design and the dense diode layout facilitate an even distribution of grow lighting making PPFD optimized for Photosynthesis to achieve consistent growth in every part of the coverage range. Exclusive Recipe Of Full Spectrum Lighting: The full spectrum is enhanced with blue and red light, in which the blue light stimulates plant growth and promotes the accumulation of plant-based phytochemicals; the abundant red light improves the maturing process and flower quality of the plants. 🌟🌟🌟🌟 FastBuds GG4 FF ⭐️ ⭐️⭐️⭐️ Bred from extremely potent and flavorful Gorilla Glue and Orange Sherbet genetics, GG4 Sherbet FF (Fastflowering) takes all the best traits to the next level, offering a high-yielding strain that can produce up to 600 g/m2 in a 7-week flowering time. This super resilient Indica-leaning hybrid thrives indoors and outdoors, and in all types of climates while producing mouth-watering sweet, fruity, spicy and earthy terps that translate into a delicious sugary hazelnut aroma. With up to 27% THC, expect an extremely relaxing and overall happy effect that’ll leave you with a huge smile from ear to ear. It’s the perfect strain for growers of all levels of experience seeking low-maintenance yet highly productive photoperiod varieties that deliver quality and quantity without extra effort. —————————————————————————————— 👊👊👊👊Down to Business 👊👊👊👊 Week 8 from seed and week 3 Flower Things are moving as they should shes looking happy and smells great 😎 Abit late with the update due to having family around 👊 Starting to pack the tent out nicely and stretching had slowed down so lets watch then buds grow 😏 Much love people 🙏🙏🙏
Processing
Likes
26
Share
@GrowGuy97
Follow
Day 42 - Ladies are growing great, some are growing a little faster than others but all in all very happy with this run so far! Thanks for following & happy growing friends!✌️🏼🌱 Day 43 - All of these ladies expect for 1 white widow & 1 orange sherbet keep having problems, yellowing leaves, rust spots, not sure if it’s me or what the issue is considering 2 of them are doing great😬😬 Day 44 - Watered the ladies today, going to give them some calmag next watering when my new PH meter gets here! Day 47 - Buds are starting to get much bigger on a few of the ladies & a lot more frosty!😍
Likes
6
Share
Likes
24
Share
Apple Betty Seedlings 🌱 are doing great! They are looking very healthy and happy. #1 was slow from the get-go but she has been building steam and is doing well. Routine this week was was just checking the humidifier every morning, and spritzing with my spray bottle x2 daily (very small amounts) starting at the base of the plant, but also making sure to get the exterior edges to allow those roots to be searching for water. Changed the light cycle to 18/6 around day 7, and also adjusted my BloomPlus BP 2500 to have 140 watts at the wall. Didn’t lower the light as the increased wattage seemed to slow down the stretch they initially had. Still using my small 250 watt heater behind my intake fan to draw some heat in and keep the tent nice and cozy, even during lights out (about 75-76 *F) By day 14, I started to water with a measuring cup, still using my 1 ml of Sensi Cal/Mag extra. Watering only about 1/4 cup of water all around the pot, and will wait until the soil is dry’ish (the old finger poke) before I start to increase the watering amount gradually. No nutrients yet, but I will be using the Advanced Nutrients- Grow, Micro and Bloom along with the Sensi Cal Mag extra. Happy Gardening 🇨🇦❤️🌱😎💨
Likes
151
Share
@PapaNugs
Follow
Was a great week overall in the tent. The girls are looking great at this point. They get water every day or two. I'm supposed water daily but you know how busy life is. So hoping to install the self watering pots after lollipopping and defoliating later this week. My issue is with my light schedule due to my timer. The timer seems to be off and I'm worried that's gonna mess up the girls. I say this cause the light schedule doesn't match day after day. Its my timer and gonna have to replace that one with a digital one.
Likes
12
Share
day 42 images are in last week, I can not count XD. bridal is stacking a lot of weight and is constantly shifting/leaning every morning, good things. I would chop any day but I will wait it out. water, tiny bit of humic and folvic to reduce chloromine, chlorine- air stones day 45 took a few nugs off on day 42, dried for 3 days. Tried bridal and blackberry. As a heavy recreational, thc is up there! bridal felt like having a blindfold over your eyes somewhat sativa uplift but heavy weight feelings. Very good. Lasted as good as 30%'s. Dr. Thunder was also very nice, nug was smaller so mixed with blackberry to have a small j. Also feels very good indica. Both trials were chopped on week 6 day 1. Very pleased with the results. I was worried bridal was more sativa; which charasteristica I am not looking for. So I believe this is a very good heavy hitter run with 4 plants. I can chop any day, but I am waiting for pink paradise to finish seeds. day45 took top nugs from bridal party, blackberry oreo bigstuff and dr. thunder. No touching pink paradise!! day 46 can chop anytime just waiting on pink paradise seeds to finish, bridal party leaning more day 47 bridal leaning hard from weight. day 48 stacking, day 48 video
Likes
12
Share
The buds are getting thicker and she's starting to smell, we're almost in the final stretch and I'm excited to see what else she'll produce this week.
Likes
9
Share
03.01.2026 – BT62 Es ist soweit: Die erste Pflanze wird geköpft. Gleichzeitig war sie auch die schwierigste von allen drei, dennoch bin ich mit dem Ergebnis zufrieden. Das Ganze wird nun mit der DryRocket getrocknet. Größere Sonnensegel wurden entfernt, zudem wurde darauf geachtet, dass sich möglichst wenige Buds oder Blätter berühren. Ich bin auf jeden Fall sehr gespannt, was das Teil kann und ob es für mich zukünftig eine Alternative zum Trocknen darstellt. Ich halte euch natürlich auf dem Laufenden. Des Weiteren möchte ich mich bei Shogun, DrainMaster und DryRocket für die Möglichkeit bedanken, ihre Produkte testen zu dürfen – das ist natürlich nicht selbstverständlich! Hier die Links zu den folgenden Brands: https://drain-master.de/ https://www.shogunfertilisers.com/de/ https://dryrocket.com/en/ ***UPDATE ZU DRYROCKET*** Ich habe die DryRocket am 03.01. gestartet. Zu Beginn lag die relative Luftfeuchtigkeit bei ca. 57–59 %, das Growzelt war vollständig geschlossen, inklusive aller Öffnungen. Anfangs habe ich versucht, das Zelt zusätzlich mit Tape abzudichten, allerdings hat sich dieses relativ schnell wieder gelöst. Am 05.01. habe ich das komplette Zelt mit Frischhaltefolie umwickelt. Dadurch konnte sich die RLF stabil bei 60–62,9 % einpendeln. Ab Tag 4 bzw. gegen Ende der Trocknung ist die Luftfeuchtigkeit dann kontinuierlich gefallen. Die Temperatur lag über den gesamten Zeitraum größtenteils konstant zwischen 19,5 und 21,5 °C. Lediglich für ein paar Stunden gab es einen Peak von 23,9 °C, ansonsten keine größeren Schwankungen. Die Buds waren überwiegend klein bis mittelgroß, optisch sehr sauber und das Terpenprofil ist nach wie vor sehr gut erhalten. Das Nassgewicht lag insgesamt bei ca. 335g. Nach Abschluss der Trocknung kamen die Buds für 2 Tage in ein luftdichtes Glas. Dort lag die RLF bei 52–54 %, was fürs Curen eher knapp, aber noch im Rahmen ist. Mittlerweile wurde alles in Grove Bags umgefüllt, dort hat sich die RLF bei ca. 55 % eingependelt. Die DryRocket funktioniert, man muss jedoch wirklich darauf achten, dass das Zelt so dicht wie möglich ist. Bei mir hat es ab Tag 3 deutlich geholfen, das komplette Zelt mit Frischhaltefolie zu umwickeln. Ich möchte klar sagen, dass ich für das Testen der DryRocket nicht bezahlt werde und mir die Rakete auch nicht geschenkt wurde. Grundsätzlich halte ich die Rakete für eine sehr gute und durchdachte Idee. Das Produkt ist Made in Germany, kommt aus meiner Region und in dieser Form gab es meines Wissens nach bisher nichts Vergleichbares. Der Ablauf ist extrem einfach: Pflanze ernten, aufhängen, Rakete starten – mehr muss man nicht tun. Aufgrund meiner Rückmeldung zur etwas zu niedrigen RLF wurde von DryRocket offen und lösungsorientiert reagiert. Es wurde nicht versucht, den Fehler auf den Kunden zu schieben. Stattdessen wird aktuell an Optimierungen für kleinere Mengen unter 500 g gearbeitet. Für die Zukunft würde ich mir wünschen, dass man das RocketFuel (Silica Gel) regenerieren oder zur Regeneration einschicken kann. Außerdem fände ich eine erweiterte App mit mehr Parametern und Einstellmöglichkeiten sehr sinnvoll. Der aktuelle Preis liegt bei 299 € inkl. Rocket Fuel. Ob einem das den Preis wert ist, muss jeder für sich selbst entscheiden. Produktion und Support sitzen in Deutschland was ein klarer Pluspunkt für mich ist. Ein weiterer Test folgt ! Wer mehr Informationen möchte, kann hier gerne reinschauen. In diesem Thread hat DryRocket viele Fragen zu ihrem Produkt beantwortet: https://forum.cannabisanbauen.net/t/nur-ein-entfeuchter-dryrocket-innovativ-oder-ueberfluessig-lasst-uns-das-klaeren-ama-mit-dryrocket/74222
Likes
11
Share
@GrowerGaz
Follow
The three small ones are in on day 14 , the bigger one is 5/7 days ahead. I gave them all a top dressing with a couple of grams each if bio grow from Greenhouse feed. Liking the @spiderfarmled , does not get to hot and seems brighter. I moved the light down to 40 cm , above the tallest plant.
Likes
2
Share
Plant seems to be growing well, she’s has some nice fans. I’ll be transplanting some time next week. Topped her this week too.
Likes
5
Share