Ciao a tutti! Settimana spettacolare! I fiori sono veramente raddoppiati, non ho mai avuto tutto questo profumo che mi invade letteralmente tutta casa e oltre, veramente uno spettacolo, dolcissimo, fruttato! 😂🤣 non sono mai riuscito ad ottenere tutti questi tricomi e terpeni vari, non vedo l'ora di raccogliere! Ancora una settimana / 10 giorni di acqua fertilizzata poi penserò al flush! 20 giorni scarsi e ci siamo 🤩🤩🤩🍀🍀🍀😎😎😎💪🏼💪🏼💪🏼

Welcome to the new week. Don't forget to bookmark and follow. The plants are getting fatter and I do start to see a nutrient burn on them due to excess food. I plan to flush this in the last two week of the grow. For now they will be pushed with 1.8ec, fed every day or every other one. I'm getting closer to the end.. I'm not happy with the hight of them but this is on me as I didn't let them to stay in veg enough after placing them in the tent..

scratch what I said last week, trichomes still milky and buds just getting more and more dense, in my last grows i’ve always been low on weed by the time harvest rolls around but i’m not this time so i’ll just be letting it go until I have to pull it.

Go go go 🚀

So at day 22 I got a small grow tent (36"x20"x63" because it's starting to get cold outside and plant was in a not so insulated shed. Hopefully my grow light will keep her warm enough for now. I will eventually have to invest in a small space heater with a thermostat. She's been though a lot of obstacles (temperature, humidity etc.) But I must say she's looking a lot better. I am open to any suggestions and thanks to the guys that gave me some info. I'm looking to get a cheap efficient fix for heating for my grow tent, if anyone have any suggestions please let me know. Thanks Day 23......so my little grow tent is is doing it's job. Temperature is staying at about 78 to 82° so I'm a little happy. Still running grow light constantly until I figure out a way to heat efficiently. I do notice some water inside my tent but I do have a an inlet fan coming soon but I might just use it as an exaust. Day 24 bigger and prettier. She growing, I guess I'm doing something right😊. Day 25...... installed an exaust fan because I was getting sweat inside my tent because it's (my grow tent) is in a shed and with the heat inside the tent and the temp in the shed. Hopefully this helps my situation. I also got temperature sensor hooked up to a heated bulb so we'll see where this goes. But my plant is growing fine for now and I'm actually seeing some growth. Let me know what you guys think.

FLOWERING IS UPON US for all of the strains I wanted to let the 2 purple berry Kush veg for another week but forgot to put them under the TS-1000 but hopefully there still gone grow fine it is experiment achter all. Have made the switch for 12/12 couple day's ago and i see them all developing 😍 hopefully by the end of next week it will get interesting 👌🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

3 November Sunset Sherbet Well by the week this cupboard is just getting smellier, danker and bushier.
Vey good I’d say, most of all the branches had reached the scrog net and most of the branches has already been threaded through to maintain the same height. While flipping to flower I noticed that the Sunset-Sherbet is making a lot more pistols due to this but not as fast as the Do-Si-Wine plant is making pistols. ( biggest leaf 17cm 😵 ) Do-Si-Wine This lady while growing vigorously to the top has thin stems which it makes more prone to bending / snapping but luckily haven’t had that problem het of a side branch bending while threading it through the scrog, but I did notice that the branches are a bit more fragile. This lady is making pistols like no tomorrow, every cola / node I can see is making pistols and this lady just wants to go full throttle. On the site it said that this is moderate growth difficulty and yes it is, thin branches, fragile and long lengthy branches. ( biggest leaf 14 cm )

Hello, fellow growers I thank you for having dedicated your attention to my garden and I hope that the contents are to your liking and help for your growth. Happy and abundant harvests for all of you

inizio lavaggio radici

Ok

🌱 Sticky Broccoli – Grow Diary 🌱 Week 8 | Vegetative Stage | Coco + Perlite This week continued with LST and additional topping ✂️🌿 Plant is responding well with multiple new tops forming. Canopy is becoming wider and more even 🌐 LST is keeping growth low and spread out for better light penetration. New shoots are developing rapidly from all trained branches 🚀 Structure is now bushy with strong lateral growth. Stem remains thick and flexible, handling training well 💪 Foliage is healthy green with no signs of stress or deficiency. Roots fully established in the larger pot ? Watering consistent with light runoff 💧 Environment remains stable with steady airflow 🌬️ 📈 Focus next week: maintain LST, stop topping soon, and begin final canopy shaping before transition to flower 🌸🔥

Very strongly cut off, I prepare to the beginning of flowering, he released a call that for some reason had a pair of leaves, because of which it turned out to be a little more torn off than it cost, I will give her a couple of days and we will begin the translation into flowering, also revealed a call which has 3 points of growth on each floor. Changed lighting: 37 watts white 55 watts blue, 38.5 watts red, Today I fully watched the side lighting and the electrics, controlled from a smartphone similar to the top lamp

i know this diarie has been abandoned and im sorry for that , now the girl is in stage of flowering , i recently bought some nutrients for her ..

She seems to be budding nicely. However in the past few days all her lower leaves are turning yellow. I know this plant is a heavy feeder and I thought I was feeding enough. She is not growing anymore, but she looks like she has a nitrogen deficiency. I do use the same water which has a low 6 ph. Today I gave her water with a 7.0 ph. Just to get her out the constant ph zone she has been in. 9/17 fed 15 MLS of foxfarm Tiger Bloom 9/19 fed 15 MLS of Tiger Bloom. 9/21 fed 4 tablespoons Foxfarm Big Bloom, 1/2 Teaspoon Foxfarm Beasti Bloom and 12 MLS of Foxfarm Grow Big. Per 2 gallons. Day 98 She has a lot of yellow lower leaves. So I hit her up with a little grow big. From what I read, she still needs some nitrogen. Lower leaves turning yellow. Think it's a little too early for that. She is a big eater and it looks like she has not been getting enough base nutrients. Her pot is very heavy, so now I'm going to hold back water until she drys a little. Getting cold out at night. Every morning I go out and she was drenched in dew. This plant I'm counting on giving me bud until at least spring. So now I have been sneaking her in the garage at night with 47 percent humidity. She seems to be very happy about this. Right now 9 pm 60 degrees, humidity 71. Humidity is way too high for her to be sitting outside. Her buds are fattening up. Some time last week I gave her a feeding of just Foxfarm Beasti Bloom. Beasti has no nitrogen and she was not happy about that. A lot of lower leaves turned yellow. So I gave her Foxfarm Tiger Bloom and that seemed to make her happy again. Will not make that mistake again.

www.blumenbot.com Week 2 here we grow! Upgraded the light to the 4 arm 6500k model. Hoping to drop the coco pot into the main pot at the end of the week. I shut off the circulation fan to bring up the temp and humidity. Seems to have helped a bit. Added a clear Tupperware container as a seedling dome to keep humidity in and she seems to like that so I got a bigger one designed for the purpose on the way. Got the legit seedling/veg dome, things are looking better for the little lady. 12/16 - last feeding with current nutes, switching to NPK RAW All in one Grow schedule. 12/17 - upped the size of the dome. Helped make the seedling zone a bit more ideal 12/20 - dome is doing a great job of keeping the lady happy. First feeding of NPK RAW coming up tomorrow! Waiting on one last packet of their nutes.....oh annnnd stickers arrived!!!!!