Likes
6
Share
Ready to harvest 👌🏼👶🏻👌🏼 2 Days without light than i cut them off. The mother is on 12/12 again. This will be hopefully an endless Grow Diarie. Clones and revegge from Punch Pie 🥊👶🏻👌🏼
Likes
27
Share
How lovely these little girls are with their long leaves, they have been transplanted and to my disappointment I did not get any root photos. They are sitting in our 2X2 at the moment but as soon as they are ready we will take our clones and put them back into the other tent for a bloom run. As for defoliation, so far it’s been two leaves each! They are happy girls and we hope they stay that way, it is almost audition time after all!
Likes
5
Share
It’s getting cold and damp. Fingers crossed for a couple warm weeks into croptober
Likes
8
Share
@sweetkaya
Follow
Day 57 - Yesterday I noticed that the leaves are darker than they should be, so I re-made the mixing solution lowering the PPM from 750 to 550. I've tried to raise it to see how much nutes that ladies can handle since it's my first time in coco and I like to experiment. Now I'm going to finish this mixing solution and then stabilize the next ones on 650 PPM. Keep learning every day 🙏 Day 60 - Today I added one extra equivalent 75W LED to give the lower nodes more power. Some fan leaves touch it, wish they will not burn. New update in the next days.
Likes
6
Share
I found out i made a big mistake at the beginning, i didnt wash the Coco twice and that resulted in dirty Coco and a ph way too high, the way I fixed it was I Watered with 2.5 L water mixed with 1/4 strength fertilizer, water half the amount wait 3-5 minutes then give the rest, on all of them. I also forgot to mention i have started to give 0.5 ml/ calmag, since the coco take some of it because its inert, you need to give more than in soil. The next day i could See they were taking in the fertilizers and are growing Happy again. I have done more lst, i used gardening wire each 20 cm long, form them like i do The cbd ( crack ) have grown happy all the way through, she is the one I have been most excited about, its for freinds and family, who can't tolerate thc but I think this 1:1 balance, can help them 🙏 @Fast_Buds i hope you guys make a foto of one like this, These medical strains are very important to keep alive. A thing to know about clay pepples is, you need to put them in water that have a ph of 6.0 otherwise they will take the ph level way too much up, trust in your measurement devices more than the soil/coco company saying what the ph Is. PL is coming back and have started to grow again. happy growing and remember it's 420 somewhere ✌️💚
Likes
29
Share
Venga familia que ya viene la cosecha, que ganas que tenia ya de darles machetazo. No veas que pinta que tienen estas plantas. No son grandes pero si están bien gordas. No soy de plantar autoflorecientes pero e de comentar que con este cultivo e hasta disfrutado. Pronto la cataremos 💨💨💨. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Hasta aquí es todo , espero que lo disfrutéis, buenos humos 💨💨.
Likes
2
Share
Esta semana seleccionamos las plantas más adelantadas de nuestro cultivo, para colocarlas bajo la nueva luminaria Led LazerLite Pro 720 de The Pure Factory, con la potencia ajustada al 50%. Miramos de que las cuatro variedades estén representadas bajo el led y bajo las lamparas HID, de esta forma podremos ver las diferencias entre los dos sistemas. Seguimos con nuestra rutina de fertilización para la fase vegetativa Grow Soldier + Green Mystic by JUJU Royal y CALMAG de BioBizz. Al final de la semana, cambiamos el ciclo lumínico para pasar a 12/12 Floración.
Likes
13
Share
@AutoCrazy
Follow
This plant is the easiest plant I’ve grown! Takes well to everything organic!! She takes to training like an absolute champ! I can’t wait to see this Dinagirl in the end!! 🍿 😎
Likes
31
Share
@BudXs
Follow
Either yer scroggin or yer not. Scroggernaut 3.0 full of upgrades and surprises for 2021. Upgrades: 1. 12000 btu ac wall mounted to replace 7000 btu floor model. Will add more control to the enviro dials 2. Additional 240w 301b Viparspectra added (thank you Valerie for the unit) to run dedicated two plant scrog o cheese served on a platter from @greenhouselab 3. Incredible genwtics bred by @wicked_stix and gifted by @wildeweed @autoflowershow 4. Some dank as fuck auto genetics courtesy of Heather😍 and the team @fast_buds 5. Red, white, and blue color scheme (to match my eyes) 6. Aerocloner for all clones Will be running 3 crops over 7 months starting Feb 1. 16 autos to run whilst mothers and clones are developing. 21 photos will be the main show and the season will finish with a late run of another 16 autos. I have chosen my cultivars carefully, have been blessed with what i truly beleive are some of the best on the planet, and i will nake it my duty to bring the full potential out of these beans. Room is dialed and ready. 2160 true watts of top end led gear to make this year boss. Co2 setup courtesy of @Silverback_guerilla and the growmies on my wall to make sure it all goes down proper. 3 grow areas within : one 4x8, a 2x4 floating scrog o cheese, and a 4x4. Gonna pump it out Running Miicrobial Mass trials on 4 of 16 autos, really looming forward to those results. Keep an eye BudXs
Processing
Likes
2
Share
Likes
3
Share
Tuesday Ok so the plants are doing really well. One of the kalini Asia plants is in the only regular pot I’m using now. It’s a little larger than the AutoPot XL’s so therefore the plant is slightly bigger but spread out because I topped it a while ago and today I took all the bottom leaves as well as quite a few of the lower lateral branches that well small and weak. Hopefully this will encourage the energy to where it want it - The main growth tips! I think it was the other kalini Asia that is in the AutoPot XL that I ended up ‘super cropping’? Do correct me if I used the wrong term. The main growth stems were quite a lot higher than the large lateral branches so I squeezed the stem with my finger and flopped the main colas over then taped them and tied them to support them. The canopy is MUCH more even across all plants now. They look a bit bent over at the moment but I bet when I look tomorrow they are all facing the light again. Magic! They are def in the stretch phase now. They are growing like crazy. I’m really glad I did the nasty job of pulling each plant out and tying it down and cutting off the shit that won’t grow anything good. Oh I also gave them a watering from the top using lots of microbes (ecothrive biosys) and molasses dissolved into warm water. The res was basically empty and honestly the AutoPot XL’s don’t even look wet at all on top even though they are getting all the water they need. They don’t react negatively when I occasionally water goodies in from the top so it’s all good!!
Likes
59
Share
(12/23-12/29, days 56 to 62) Hope everyone enjoys the pictures. I will try to add a video and black back or cover pics by end of week every week. Week 6 Notes & Observations: No new issues to note, no mites found after the first and I have used Spinosad twice now just in case. P2 is getting stressed over ties and no ring, so I decided they will both go on a ring after i broke another branch without realizing it. Found it the next day and then topped the other side to gain two colas there - still 8 set but with varied start time's and points. Still looking to flip around new year’s day. Day 58 (last feed was day 55) Tested and Calibrated my ph pens. Starting weight from each pot was 18 lbs and 8 oz, this time P1 weighed 12lbs 1oz. (12lbs 10oz before last feed) and P2 weighed 11lbs 8oz before feed (11lbs 8oz before last feed). Each plant got 1.5 gallons of purified water with a mix of Veg/Bloom Mix concentrates - 300ppm Veg Mix (recipe on week 2) and 190ppm Bloom Mix (recipe on week 5) with 1.5ml of CaliMagic (General Hydroponics 1-0-0) . The ph on this feed was balanced to 6.75ph (6.25 last time). After feed this time, P1 weighed 21lbs 5oz and P2 also weighed 21lbs 11oz (both weighed 20lbs 9oz after last feed). I got ~8 cups of runoff on P1 and 10 cups on P2 this time (8 cups of runoff on P1 and 8 cups on P2 after last feed). Runoff for P1 ph was 6.42 with 970ppm (6.36 with 1110ppm last feed) and P2 was 6.41 with 980ppm ( 6.35 with 1170ppm last feed). no top soil tests this time as ph is mostly showing no issues - next feed will be 1.5 gallons of de-chlorinated water and 6.5 to 6.75ph again - I dont see any issues from feed or training.
Likes
44
Share
@Roberts
Follow
FBT2402 had a rough life. She had mites the whole grow. She was already flowering when I figured it out. So I could not treat the flower then. She has a strong piney, citrus, and sweet smell. It looks like it will be a few ounces once it is all done. Thank you Fast Buds, Medic Grow, Xpert Nutrients, and Athena. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g If anyone needs to purchase fastbuds here is a link for my affiliate program https://myfastbuds.com/?a_aid=60910eaff2419
Likes
10
Share
week six flower everything looks great so far :D buds are filling out & terps going crazy!! CherryPie 1: smells fresh like minty CherryPie 2: smells like cherrys very fruity I water them with 1.5l every 48h the light I use was set to 100% and it hangs 80cm away from the tops
Likes
4
Share
So far so good they are starting to fill out the 1/2 and 1 gallon velcro transplant bags with roots very nicely. I still havent fed them any grow nutrients just some mammoth mycos,hardy gro ultra-bio and a liquid soil inoculant i got from ebay. I will them some NPK raw grow and cal/mag next week.
Likes
Comments
Share
All water. Smells amazing and I started to flush the zombie death fuck. Probably too soon as I want 60% Amber's and it's barely 5%
Likes
16
Share
🌱 Eternity Cup 2025 – Woche 6 Update 🔥 Unser Eternity Cup 2025 Grow, powered by Zamnesia & Plagron, geht in die nächste Runde! 🚀 Die Runtz Autoflowers unter der Evo 301 (Samsung Chips, 180W) zeigen jetzt deutliche Unterschiede – jede Pflanze entwickelt sich nach ihrem eigenen Tempo. 🌿 🔍 Setup & Entwicklung nach 6 Wochen: 🌿 #1 – 20L Topf, nicht getoppt, aber LST Diese Dame steht jetzt voll in der Blüte! 🌸 Dank des großen Topfes hat sie sich super entwickelt, schöne Buds setzen sich langsam an. Sie bleibt stabil und gesund – die LST-Methode zahlt sich aus! ✅ 🌿 #2 – 8L Topf, getoppt & LST Während die anderen zwei sich voll auf die Blüte konzentrieren, legt #2 nochmal ordentlich in die Breite zu! 📏 Das Topping und LST zeigen ihre Wirkung – die Pflanze bleibt kompakt, aber buschig. Die ersten Blütenansätze sind zu sehen, aber sie nimmt sich weiter etwas mehr Zeit. 🌱 🌿 #3 – 8L Topf, nicht getoppt, kein Training Genau wie #1 steht auch diese Pflanze voll in der Blüte! 🌸 Sie ist von Natur aus etwas höher gewachsen und beginnt jetzt, schöne Buds auszubilden. 🌱 Fazit nach Woche 6: Die ungetoppten #1 & #3 sind mitten in der Blüte, während #2 sich weiter in die Breite entwickelt und noch ein wenig hinterherhinkt. 🌱💪 Aber alle drei sind kerngesund, und es bleibt spannend zu sehen, ob sich das Wachstum von #2 am Ende durch höhere Buddichte auszahlt! ➡️ Wie wird sich der Blütenaufbau in den nächsten Wochen entwickeln? Bleibt #2 länger in der Vegi? Wir halten euch auf dem Laufenden! Stay tuned für Woche 7! 🔥 Update vom 25.02 die explodieren ich muss das Zelt wechseln maximal 1 Woche noch und sie kommen in das doppelt so große Zelt !!! Ich bin so Happy bitte schaut euch #1,#3 an das sind Autos #EternityCup2025 #Zamnesia #Plagron #GrowDiaries #RuntzAuto #Homegrow #CannabisCommunity