Likes
Comments
Share
Processing
Likes
31
Share
Week 11 Jan. 13 - 19, 2020 Jan. 17, 2020 I'm a few days late updating week 11. So here it goes. I harvested the 3 Zkittlez plants. I enjoyed growing these. They didn't get as tall as I'd liked but that was my fault, I kept my lights too close during the early stages of the grow. I learned that these auto flowers don't not need to be LST'd. My Zkittlez #1 I over stressed and it yielded out only half of what the other plants did. Of the other two plants...one was LST'd and the other was left to grow more naturally with very little training. They both yielded within 1 tenth of an ounce of each other. Final dry weight is 2.5 oz. Could've been better, but it's my first time and I learned a lot. Here's a link to my diary for Zkiitlez if you'd like to check out my first grow experience in more detail. https://growdiaries.com/diaries/44659-fastbuds-zkittlez-auto-grow-journal-by-weedwacker/week/212148 Looking forward to harvesting my Californian Snow plants which still fattening up and putting on major trichomes. No amber trichomes but wow the plants are frosty and they have a strong pungent smell. When the main cola is bent a little sideways it really begins out the smell. The smell is like a gassy fuel, diesel fuel, strong chemically smell. I love it. CS #3 is giving me some problems. The pics might show it. The leaf tips are curling up and thr leaf edges are turning brown. Not sure if I can correct this befor harvest. It's late into flower. I may just ride it out until then. I've topped dress once weekly for the last 4 weeks with kelp, and a blend from roots organic for bloom 4-6-3.
Likes
9
Share
Absolutely gutted. So sorry Sssc my pup plucked the damn thing! She was going so well!! I'm starting the other one, Tonight 😁 Win some, loose some ✌️💚
Likes
51
Share
@urbi09
Follow
Diary Plant was given nutrient solution every day when the sun went down in the concentration down bellow -    FloraSeries Gro-->1.8 mL/L -    FloraSeries Micro-->1.2 mL/L -    Flore Series Bloom-->0.6 mL/L -    Calcium solution-->1 mL/L I started with 1L of tap water measured at 240ppm. Then added Calcium fertilizer from gardening store and ppm were around 500. Then Flora series nutrients were mixed in and ppm reading was around 1000. This is to high so I diluted the solution with tap water to 650ppm. I ended up with 2 L of nutrient solution. Day 67 I topped again for the fourth time and did some prunning, plant now has 16 mains. I also did some bending. Firstly I had to build some kind of support where mains would be attached to. I shaped 1 m long steel wire into circle shape, drilled a hole into plastic pot and pushed the 50 cm long wooden stick through it. Then steel wire was zip tied on to wooden stick. Bending was quite easy to do. I used soft rubber wire to attach mains to the steel wire support. I bended in the way that mains were equaly distanced from eachother. Weather report Day 64-67 Weather was sunny, not a single cloud in the sky. Day temperatures were extreme, around 37 °C. Night temperatures were 29 °C Day 68-70 Weather was sunny but the temperatures calmed down a little bit. During the day I measured around 31 °C.
Likes
61
Share
@FoTwenny
Follow
Fo' Twenny here with an update on our little Gorilla x Cookies cultivar from Expert Seeds! 9/16 - Day 12: She is a beautiful shade of green and looks happy. I was one square pots short and when I bought this one, I accidentally got the 7" x 7" instead of the 6" x 6". It will bug me, because I am weird, but I planted her in it anyway. I put 1 tbsp Mycos, .5 tsp Recharge, and .25 tsp of Azos in the whole at the root zone. Sprinkled some White Dutch Clover seed after transplanting. Watered with plain water. BAD NEWS: Half of the blue diodes have gone out in the TMLAPY light. This light was actually gifted to me shortly after a friend purchased it from Amazon and realized it was too small for their space. It seemed to be serving it's purpose well for vegging photos and running bumper crops of autoflowers but it failed only four months after the warranty period ended! Weak-Sauce! GOOD NEWS: So, I upgraded the 24"x48" tent to Samsung LM301H boards. I ordered a 320w straight single piece heatsink with 3 boards from Geeklight. I went with the 3k spectrum and switchable UV/IR since all my autoflowers bloom under this light. $306 USD after all is said and done. https://app.alibaba.com/dynamiclink?touchId=1600101815945&type=product&schema=enalibaba%3A%2F%2Fdetail%3Fid%3D1600101815945%26ck%3Dshare_detail&ck=share_detail&shareScene=buyer 9/17 - Day 26: Installed new light NUTRITION: Mixing rundown Foliar Feed & Nutrient Solutiin 2 gal tap h2O run through x2 KDF filters Start ppm 630 Start ph 7.8 1 tsp/gal Gold Shield Silica Supplement 1 tsp/gal Fox Farm Gringo Rasta Cal-Mag 8.1 ph .33 tsp gal ph down pH: 6.5 PPM: 730 Serenade 3 tsp/gal (Always adjust pH prior to adding any microbial innocclants) Filled Spray bottle with 32 oz of the 2 gal mixed solution. Add 2 tsp/gal of Fox Farm Flower Kiss (.5 tsp 32oz) 6 tsp/gal Optic Foliar Transport PPM: 749 pH: 6.4 Added 1 tsp Recharge to the remainder of feed solution (to 1.75 gal) in the sprayer. Thanks for stopping by my garden! Please check out my other diaries & give me a follow! Happy growing my friends! ☺️🌱 Peace, ☮️✌️ Love, 💚🤟 & Frosty Nugs! ❄️🌲 - Fo' Twenny
Likes
10
Share
7/17 just feeding once a week. added worm castings and took a clone
Processing
Likes
13
Share
@neuraxis
Follow
Started from seed this lady's have 17 days under half load 4 X 50W Cree CXB3590 CRI 80 3000K custom build led. 7days in rockwool cube under a dome , 10 days in 750ml pot. Freshly transplanted into to final pot. They have received 250ml of fertilizer solution and transplation soil was moisted with 6.5PH water. Led now running on full load. This project have some custom/extra gadget, a prototype growing controler. Hardware Specs: Raspberry PI 4 4Go Ram + SSD 120Go Phat sparkfun qwiic i2c hub + i2c sensor for : temperature,humidity, co2, tvoc, air pressure and distance measurement(plant height) Linked with one custom wifi power bar for schedule and countdown. One sonoff pw r2 for energy monitoring. Both using ESP8266 chip and running on Tasmota alternative firmware. Linked to the controler using normal wifi AP. From Wall|----Sonoff-----Powerbar---: Led, Extraction Fan, Mouvement Fan, and the Rpi4 Software: Exploitation System: Custom Linux Buster Lite OpenHab : Open source domotic software for visualition and automation. Mosquito MQTT +TLS server : Used to publish and receive message/data from sensor etc. InfluxDB : DataBase for data retention Chronograph: Visualisation and transformation panel to analyse our data. Custom python code for running the sensor and publishing result into mqtt channel Chronograph have monitoring panel for now The growroom Sensor AkA spaceship The system sensor and hardware/computer monitoring : Memory, Disk space, CPU load and temperature. In/Out etc. Network etc The database: request per db ,memory heap, disk usage, http request etc. Working : Co2, humidty,temperature, Tvoc, Current,Voltage, Power, Daily/yesterday/Total energy consumption on kWh and $ Planned in version 1.0 : Mesuring plants height using ultrsonic sensor. Adding remote On/Off function on sensor using openhab. Adding power schedule in openhab. Adding basic automatic watering/dosing system, Planned In version 2: Adding relay and dimmer on the custom led to control/dim each cob. Adding custom small emerson effect led based on 3W led. Adding , automatic, PH, PPM and temperature monitoring for water/fertilizer. Adding PAR sensor for light monitoring. Adding soil moisture and PH sensor. ============================================ 2020-05-07 ============================================ Added security cam for streaming with rtsp, working on http conversion for addition in openhab Added snapshot. CO2 sensor down, some resoldering needed. =============================== ================================= 2020-05-08 =============================== Good: Updating fertilizer quantity from 250ml/day to 500ml. Watering planned for the end of the day. 2 days ago i've pinched the head of each plant Internode are booming. Started LST training s to help the lower internode. Bad: Noted some physiological/Nonparasitic leaf Roll on one plant ; humidify level is too low; Humidificator filter is broken, need to be replaced. Monitoring #4 for couples of days.
Likes
Comments
Share
@MrIssa3x3
Follow
Day 49. They’re starting to lean pretty good. Staked and tied a few branches. Still drinking normal, expect them to slow down this week. Ended up defoling and top dressing with small amount of craft blend, Kashi, and build a flower on like day 47. Plucked one or two sacs off the diesel donuts. Tall, purple jug life pheno in the loudest with sweet burned rubber nose. Ready to see how these girls finish.
Likes
28
Share
@Weedman46
Follow
So I said no more training but I couldn't help myself only second time I've done scrog and I'm trying to find a balance between plant height and light penetration you can see the plant on the right is clearly more defoliated I'm doing side by side comparison to see what works better
Processing
Likes
8
Share
Hello everyone, Well the greenhouse is getting really packed to walk in so all I have is a video for you guys to see how everything is going. Hope you guys enjoy... See you next week...
Likes
26
Share
9/18: New week...fed with Boomerang and Kangaroots 9/19: Applied Axiom harpin proteins and boomboom spray 9/20: Fed full strength TPS One...decent growth. The smaller one is less droopy now. 9/21: Tucked a few leaves and took some photos and a video. Looking good. Just a couple more days of 24/0... 9/22: Switched out the 560w of 5000k CCT lighting for 720w of 3000k CCT lighting and set the timer for 12/12. Decided against 13/11 with emerson effect...trying to save a few bucks on electricity. I'm keeping the lights at 30" from the tops for a day or two. 9/23: The girls loved their first night of sleep...so perky!
Likes
19
Share
📆 Semana 3: Esta variedad sera un cultivo mixto, interior y exterior para ver todo su poderio em ambos lugares. Ha sido una buena semana en la que han dado un gran cambio en sus lugares definitivo 😎. Se le ha aplicado un tratamiento insecticida con agua + tierra de diatomeas ( 1 cucharadita por litro de agua), también se le aplica un tratamiento fungicida con una infusión de cola de caballo para evitar futuro moho. A partir de ahora se aplica riego por goteo, 1/3 de la dosis recomendada por el fabricante ya que al estar en exterior y en buena tierra tiene bastante comida. En interior seguira el mismo plan nutricional que el resto, ajustando sus dosis de nutrientes segun sean requeridos. Potencia de la lámpara: 60% , se conecta el Marshydro TS-1000 para dar apoyo en la carpa de 1.50 x 1.50 x 1.50
Likes
34
Share
La segunda semana fue bien, a las plantas que estiraban más les causé Low Stress para mantener una altura igualada. De las 3 variedades que tengo, es la que antes ha mostrado las preflores. Un error vuelvo a repetir ha sido no tener medidor de EC-PH y otro ha sido el haberme excedido con los s riegos. Conecto pronto el CO2 a 630ppm par ver si así logro obtener un buen estiramiento esta semana. 📅 Día 15: 🔹 Descanso 📅 Día 16: 🔹 Riego según la tabla de nutrientes. Conecto CO2 a 700ppm. 📅 Día 17 : 🔹 Low Stress para que dé más luz a las ramas bajas y tengan más espacio para desarrollar. No quito hojas ya que creo que les quitas los paneles que las alimenta. El riego de ayer las sentó muy bien y están bebiendo el agua rápido por fin. 📅 Día 18:🔹 Descanso, puntualizar que he activado el CO2 a 730ppm y decir que se han bebido todo el agua, mañana toca riego. 📅 Día 19: 🔹Riego según la tabla de nutrientes. La EC me dio 2000 y el pH 6.3
Likes
32
Share
@Sadhus
Follow
😓😥😢attaque botrytis 😭 j'ai du couper les plus belle tête qui montré des signe de moisissures 😓 j'ai peur que sa se propage 🤯
Likes
1
Share
@A-C-H
Follow
Die Blüte schreitet voran, Caliconnectionn sind wunderschön.
Processing
Likes
6
Share
@Weedzoks
Follow
La plante a fortement jauni cette semaine et des taches sont apparues Flo 23: Arrosage eau Flo 24: Pulvérisation de 3ml de Vita Race
Likes
14
Share
@Naujas
Follow
I don't know what's wrong with her, but she's suffering, I don't give her any nutrients anymore, only pure 6.3 ph water. Although the leaves are suffering, the flowers are really maturing well, I think she has about two weeks left until the finish, the smell it gives off is fabulous!!!! I can't wait to taste it, it's really very resinous, I have no doubt that it will be amazing:) good luck to everyone.:)
Processing
Likes
23
Share
@Fabhz
Follow
A lot of rain, crazy weather.