☀️ // Day 66 🍁 Chopping day Every grow must come to an end. Like I said in the Cookie Casket update, I can't be the only one who gets kinda sad when chopping down these plants. You take the best care you can for 4 months so that they're as happy and healthy as possible and from one day to the next, you kill them. That just breaks my heart, but that's how it is. I am telling myself that they basicially become a part of us through the endocannabinoid system, that actually helps haha This was my first grow with genetics from THC Titan. I had an amazing start, a very stressful mid section with mayor soil problems but in the end, it was a rather smooth sailing again. This plant was stabilized a week earlier than the Cookie Casket, that's why her leafs are not nearly as damaged. Overall, I am extremly happy with how this plant turned out. I expected a frost monster, but seeing that by myself in real life is just another experience. The trichome density and the thickness of the trichome heads is just unbelievable. I got a small bud pheno but I do not care at all about bud size. For me personally, buds need to be tight, rock hard and glistered with trichomes. As long as that is the case, I am happy WHEN IT COMES TO THE LOOKS. Of course, taste and effect is the most important aspect and I will tell you something about that in a month or so, when the final reviews come in. Another thing about the buds: The calyxes are extremly fat. 1 calyx from this plant equals 3-4 calyxes from the Cookie Casket plant and I just love that! It looks so amazing to me and the colors are also out of this world. A true deep purple. I cannot wait for their dryed look! Like I said, the review comes in about a month. I want to try them properly with a little cure in between. And I will update the review in months to come. So stay tuned for the harvest section. Thank you for hanging around here. I really love this community and I hope we all stick around for many years and experience this beloved hobby together! Peace, Ganjin 🌱

(UPDATE) Not bud rot, cabbage worms. Lame. Purchasing some BT killer. The week was going good until I (may have had a delusional) found some potential Bud Rot! I took photos and asked a question, no answer yet. So I cut the potentially infected area away and will monitor very very closely.

Begining week 5 of veg the Purple Goat Cheese I moving along all her tops are starting to come up after being topped an she is looking nice an healthy just a little bigger then the Strawberry Banana but a nice bush just like her The Purple Goat Cheese is doing good ending week 5 finally starting to pick up some size still the smallest tho but she's been catching up

Ok so this week I did a defoliation and a tigh down too the netting , I really was not planning on doing such a big defoliation but the leafs became thick and dense and there was almost no light penitration down too the lower branches of the plant , so she is opened right up now and the humidity and temperature has dropped loads and the air is moving alot better around the leaves and branches , I will not take anything more off her now , I have also added Cal mag too the nutrients for this week only , she is well into pre flower now but the stretch has not yet started so I figured it's no or never too defoliate and tigh them down , this grill really has grown right out this week and is unrecognisable from the plant just a few days ago , I am very happy with them so far and being new too all this it's all very exciting , Thanks for looking :)

Used RootMax mycorrhizae- bacillus + glomus: good root growth Top dressed with compost

2nd net is up. Early bud formations are promising. holding up to the extremes pretty well, some leaves taking minor damage, but overall, she is holding up, gave her 1 night at 50F see how she would react, stressful. Not advised as it messes with her metabolism, but I want to see if it triggers any anthocyanin response. Love to see her purp up but no signs yet. Remember, For every molecule of glucose produced during photosynthesis, a plant needs to split six molecules of water. This process provides the hydrogen needed for synthesizing glucose and other organic compounds, while oxygen is released as a byproduct. Homework. If Rubisco activity is impaired and it cannot properly function or regenerate its substrate, the plant's leaves are likely to turn a pale green or lime green, a condition known as chlorosis. Essentially, Rubisco activity is highly regulated and susceptible to various environmental and metabolic factors that can cause it to become inhibited, leading to an apparent failure in RuBP regeneration due to a lack of consumption. Rubisco regeneration is intrinsically linked to nitrogen supply because Rubisco is a major sink for nitrogen in plants, typically accounting for 15% to over 25% of total leaf nitrogen. The regeneration phase itself consumes nitrogen through the synthesis of the Rubisco enzyme and associated proteins (like Rubisco activase), and overall nitrogen status heavily influences the efficiency of RuBP regeneration. RuBisCO is a very large enzyme that constitutes a significant proportion (up to 50%) of leaf soluble protein and requires large investments in nitrogen. Insufficient nitrogen supply limits the plant's ability to produce adequate amounts of RuBisCO, thereby limiting the overall capacity for photosynthesis and carbon fixation. Maintaining the optimal, slightly alkaline pH is crucial for the proper function and regeneration of Rubisco. Deviations in either direction (too high or too low) disrupt the enzyme's structure, activation state, and interaction with its substrates, leading to decreased activity and impaired RuBP regeneration. (Lime/yellowing) Structural Component: Nitrogen is an essential building block for all proteins, and the sheer abundance of the Rubisco protein makes it the single largest storage of nitrogen in the leaf. Synthesis and Activity: Adequate nitrogen supply is crucial for the synthesis and maintenance of sufficient Rubisco enzyme and Rubisco activase (Rca), the regulatory protein responsible for maintaining Rubisco's active state. Nitrogen deficiency leads to a decrease in the content and activity of both Rubisco and Rca, which in turn limits the maximum carboxylation rate, Vmax, and the rate of RuBP regeneration Jmax, thus reducing overall photosynthetic capacity. Nitrogen Storage and Remobilization: Rubisco can act as a temporary nitrogen storage protein, which is degraded to remobilize nitrogen to other growing parts of the plant, especially under conditions of nitrogen deficiency or senescence. Nitrogen Use Efficiency (NUE): The allocation of nitrogen to Rubisco is a key determinant of a plant's photosynthetic nitrogen use efficiency (PNUE). In high-nitrogen conditions, plants may accumulate a surplus of Rubisco, which may not be fully activated, leading to a lower PNUE. Optimizing the amount and activity of Rubisco relative to nitrogen availability is a target for improving crop NUE. Photorespiration and Nitrogen Metabolism: Nitrogen metabolism is also linked to the photorespiration pathway (which competes with carboxylation at the Rubisco active site), particularly in the reassimilation of ammonia released during the process. To increase RuBisCO regeneration, which refers to the process of forming the CO2 acceptor molecule Ribulose-1,5-bisphosphate (RuBP) during photosynthesis, the primary methods involve optimizing the levels and activity of Rubisco activase (Rca) and enhancing the performance of other Calvin-Benson-Bassham (CBB) cycle enzymes. Biochemical and Environmental Approaches: Optimize Rubisco Activase (Rca) activity: Rca is a crucial chaperone protein that removes inhibitory sugar phosphates, such as CA1P (2-carboxy-D-arabinitol 1-phosphate), from the Rubisco active site, thus maintaining its catalytic competence. •Ensure optimal light conditions: Rca is light-activated via the chloroplast's redox status. Adequate light intensity ensures Rca can effectively maintain Rubisco in its active, carbamylated state. •Maintain optimal temperature: Rca is highly temperature-sensitive and can become unstable at moderately high temperatures (e.g., above 35°C/95F° in many C3 plants), which decreases its ability to activate Rubisco. Maintaining temperatures within the optimal range for a specific plant species is important. •Optimize Mg2+ concentration: Mg2+ is a key cofactor for both Rubisco carbamylation and Rca activity. In the light, Mg2+ concentration in the chloroplast stroma increases, promoting activation. •Manage ATP/ADP ratio: Rca activity depends on ATP hydrolysis and is inhibited by ADP. Conditions that maintain a high ATP/ADP ratio in the chloroplast stroma favor Rca activity. Enhance Calvin-Benson-Bassham (CBB) cycle enzyme activity: The overall rate of RuBP regeneration can be limited by other enzymes in the cycle. •Increase SBPase activity: Sedoheptulose-1,7-bisphosphatase (SBPase) is a key regulatory enzyme in the regeneration pathway, and increasing its activity can enhance RuBP regeneration and overall photosynthesis. •Optimize other enzymes: Overexpression of other CBB cycle enzymes such as fructose-1,6-bisphosphate aldolase (FBA) and triose phosphate isomerase (TPI) can also help to balance the metabolic flux and improve RuBP regeneration capacity. Magnesium ions, Mg2+, are specifically required for Rubisco activation because the cation plays a critical structural and chemical role in forming the active site: A specific lysine residue in the active site must be carbamylated by a CO2 molecule to activate the enzyme. The resulting negatively charged carbamyl group then facilitates the binding of the positively charged Mg2+ion. While other divalent metal ions like Mn2+ can bind to Rubisco, they alter the enzyme's substrate specificity and lead to dramatically lower activity or a higher rate of the non-productive oxygenation reaction compared to Mg2+, making them biologically unfavorable in the context of efficient carbon fixation. The concentration of Mg2+ in the chloroplast stroma naturally increases in the light due to ion potential balancing during ATP synthesis, providing a physiological mechanism to ensure the enzyme is activated when photosynthesis is possible. At the center of the porphyrin ring, nestled within its nitrogen atoms, is a Magnesium ion (Mg2+). This magnesium ion is crucial for the function of chlorophyll, and without it, the pigment cannot effectively capture and transfer light energy. Mg acts as a cofactor: Mg2+ binds to Rubisco after an activator CO2 molecule, forming a catalytically competent complex (Enzyme-CO2-Mg2+). High light + CO2) increases demand: Under high light (60 DLI is a very high intensity, potentially saturating) and high CO2, the plant's capacity for photosynthesis is high, and thus the demand for activated Rubisco and the necessary Mg2+ cofactor increases. Mg deficiency becomes limiting: If Mg2+ is deficient under these conditions, the higher levels of Rubisco and Rubisco activase produced cannot be fully activated, leading to lower photosynthetic rates and potential photo-oxidative damage. Optimal range: Studies show that adequate Mg2+ application can enhance Rubisco activation and stabilize net photosynthetic rates under stress conditions, but the required concentration is specific to the experimental setup. Monitoring is key: The most effective approach in a controlled environment is to monitor the plant's physiological responses e.g., leaf Mg2+ concentration, photosynthetic rate, Rubisco activation state, and adjust the nutrient solution/fertilizer to maintain adequate levels, rather than supplementing a fixed "extra" amount. In practice, this means ensuring that Mg2+ is not a limiting factor in the plant's standard nutrient solution when pushing the limits with high light and CO2. Applying Mg2+ through foliar spray is beneficial to Rubisco regeneration, particularly in alleviating the negative effects of magnesium (Mg) deficiency and high-temperature stress (HTS). While Mg can be leached from soil, within the plant it is considered a mobile nutrient, particularly in the phloem. Foliar-applied Mg is quickly absorbed by the leaves and can be translocate to other plant parts, including new growth and sink organs. Foliar application of: NATURES VERY OWN MgSO4 @ 15.0g L-1 in a spray bottle. For those high-intensity workouts when 1 meal a day is just not enough! Foliar sprays are often recommended as a rapid rescue measure for existing deficiencies or as a supplement during critical growth stages, when demand for Mg is high. Application in the early morning or late evening can improve absorption and prevent leaf burn. The plant was getting a little limey yellow in the centre. Shortly thereafter, she was back in business, green mostly regenerated. The starting point [of creativity] is curiosity: pondering why the default exists in the first place. We’re driven to question defaults when we experience vuja de, the opposite of déjà vu. Déjà vu occurs when we encounter something new, but it feels as if we’ve seen it before. Vuja de is the reverse—we face something familiar, but we see it with a fresh perspective that enables us to gain new insights into old problems. Confidence is evidence... nothing more. You are confident because you have driven 10,000 times, you are confident because you have spoken 10,000 times. People think confidence is a feeling, but it's not. If you want more confidence, then you need to create evidence, take more shots, collect more data, build more experiences, take more risks; fail, confidence doesn't come first; it is the reward you get for doing the work. no one else wants to do.

Wasser, Sonne, das war‘s.

Amazing experience with the Mix Pack, I will try it again next summer for sure. Love the variety.

En la 4ta semana aumentamos la dosis del fertilizante para crecimiento, regulamos su p.h en 6.0 e hicimos una poda apical en el 4to nodo de cada una de las plantas.

Day 77-84 (April 17th-24th) (Day 78) I honestly cant believe I’ve been vegging this long. The growth for almost 80 days of veg is laughable. I’ve compiled a little list of what has gone wrong so far. - I added too much glacial moraine which made the soil too water retentive - I’ve been foliar feeding too much kelp - I gave too many bloom nutrients for a plant in veg - EDIT: DID NOT WATER ENOUGH AT ONCE The plants have been drooping like crazy this past week and I’m going to try watering in a full gallon per plant. I first thought it was from the medium not drying out enough, soil compaction ect. and I’m sure those are definitely areas where my soil mix could improve but the bottom of the container is pretty damn dry. I could actually be under watering despite soaking the top with 500ml a day. I’m going to sit the pots on some plastic sheeting so they don’t evaporate as much from the bottom and water in a full gallon each making sure I get some runoff. I was going to wait until I get my air pump but fuck it, it’s coming tomorrow afternoon. The pots are so big that they’re not fully wetting to the bottom even with a gallon. I’m going to try to water in a gallon every 4 days while keeping the top soil moist with the sprayer. In hindsight 6 plants in 5-7 gallon pots would be the most ideal. (Day 79) Holy fuck did a full gallon watering make a difference. I should have been doing this the whole time. All 4 plants are praying and stretching upward like crazy. They just look more vigorous and happy within a day. I bet they will be even happier with that supplemental air. If things stay this smooth I should be able to flip around day 84, possibly earlier. Got my air pump in the mail today. This is kind of a shot in the dark so hopefully it works. It’s super loud and vibrates like crazy. First I’m going to try running it 24/7 and see if there is any improvement over the next few days. If it does work, I’ll try running it on my humidity controller so it’s not constantly humming and will only turn on when the humidity is high. I’m going to turn the night time temps down to 70f to prevent root problems now that I’m watering much bigger amounts less frequently and it’s getting warmer during the day. (Day 81/Day 1F) Ever since I’ve been watering in the proper amounts I have seen an absolute explosion in growth. I’ve decided to flip today, now that I’m confident my soil mix isn’t completely fucked. I might run into some N/mg problems during the stretch so I will make sure to give a final foliar feeding around the end of week 1. (Day 3F) So I’m literally seeing dwc growth rates now. Plants have grown more in the last 5 days than the last 3 weeks. If I had stayed at this pace of growth since day 1, I would have an 8 foot tall plant or I would be halfway through flower already. Oh well. Good learning experience. *grits teeth* I’m going to put up the second layer of trellis before these girls stretch out of control. Bbb#3 is seriously stretchy and will likely more than double in size in the next 2 weeks. The other 4 are all quite stout and bushy. I’m giving a light, preemptive defoliation each day and picking off some of the lower sucker branches. I will do a full strip around day 21F.

Defol near end of week

The purple kush has been the smallest seedling from the start. It has finally started to actually grow for like 2 weeks or so it looked exactly the same but it’s on its way This past week was smooth sailing I topped all the plants

🏝️thirty hours in water, time to plant🏝️

Flowering day 19 since the time change to 12/12. Hey all together 😀. This week she has developed beautifully ☺️. I poured it 3 times with 1.2 l this week. Tomorrow I will add the 2 g GHSC Powder Feeding Bio Bloom because the first blossoms are coming :-). I checked all the leaves thoroughly for pests or diseases and everything is fine ☺️. Next week I'll look at your roots as soon as the coconut is completely rooted. As every week, the tent was cleaned and the entire technology checked. The humidifier was also refilled every day 👍. In the next few days I will remove the bottom shoots so that the energy doesn't end up being wasted in the small popcorn buds. I wish you a lot of fun with the update. Stay healthy 🙏🏻 and let it grow 🍀 You can buy this Strain at : https://www.zamnesia.com/de/5165-zamnesia-seeds-kalini-asia-feminisiert.html Type: Kalini Asia ☝️🏼 Genetics: Black Domina x Purple Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Day 57 total (for plant 1) Day 8 of flower (for both) 2020-06-28 New week, changed the nutrients from 1000 to 800 ppm because I kept having to dilute with CaliMagic water last week. I tried jumping up the nutrients too quickly. No burn but the nutrient intake wasn't nearly as fast as the water intake. Pre-flowers are coming out all over :) 2020-06-28 Plant is still drinking far more than its taking in with nutrients. You really have to drop them a bit when you go into flowering because they start guzzling... Trying to keep them around EC=1.6 but I might have to go down to 1.4. Regardless, they are clearly happy and growing like crazy. Flowers are starting to emerge at the beginning of week 2 of flowering. I think that's a good sign. I continue to have to defoliate, especially plant 2! It's making these huge fan leaves every day. 2020-07-01 I typically have to top up Plant 01 every other day with water, so thirsty and growing so quickly, I wish it would stop.... I am posting an image of what I think is springtails. Gonna ask a grower question about it. 2020-07-04 Springtails don't seem to be hurting much. Tested and they seem to be fairly resistant to bleach AND hydrogen peroxide... They also seem to eat their dead very quickly and they congregate in clumps. They are bizarre to watch. Seem to have gotten a bit of nutrient burn on plant 2. I've kept the nutrients about 1650 but the ppm in the water keep going up because of the water usage. I keep diluting it down over the course of the week and it seems to be working.

Day 57: Watered each plant with 1L with nuts 1588 ppm, 3380 us/cm, 3.3 EC (purple punch, strawberry banana, wedding Cheesecake) 1690 ppm, 3595 us/cm, 3.5 EC (gorilla cookies) 2 different feedings for the 10 plants Day 60: Watered each plant with 1L with nuts 1563 ppm, 3325 us/cm, 3.3 EC Day 62: Watered each plant with 1L with nuts 1726 ppm, 3712 us/cm, 3.7 EC (purple punch, strawberry banana, wedding Cheesecake)(I gave them more than usual, by mistake) 1528 ppm, 3525 us/cm, 3.5 EC (gorilla cookies) 2 different feedings for the 10 plants Day 63: Watered each plant with 1L with nuts 1563 ppm, 3325us/cm, 3.3 EC (purple punch, strawberry banana, wedding Cheesecake) 1523 ppm, 3301 us/cm, 3.3 EC (gorilla cookies) 2 different feedings for the 10 plants Day 65: Watered each plant with 1L with nuts 1518 ppm, 3210 us/cm, 3.2 EC (purple punch, strawberry banana, wedding Cheesecake) 1359 ppm, 2891 us/cm, 2.9 EC (gorilla cookies) 2 different feedings for the 10 plants Next feeding I will start to flush some plants, 1st week with flawless finish, 2nd week clean water, 10x the pot, 150L each Day 67: Watered each plant with 1L with nuts 1379 ppm, 2908 us/cm, 2.9 EC (1 purple punch, wedding Cheesecake) 1250 ppm, 2687 us/cm, 2.7 EC (gorilla cookies) 285 ppm, 606 us/cm 0.6 EC (3 strawberry banana and 2 purple punch) (2L each) 3 different feedings for the 10 plants Started to flush all the strawberry banana and 2 purple punch with flawless finisher. (1st week flawless finisher, 2L each, 2nd week clear water, 150L)

Another week closer.... This grow went really well, we are at 43 days budding only have about 15 to 20 more days to go. Both the Gorilla Glue #4 and the Shiskaberry grew without any problems, Great genetics.. All 3 of the Shiskaberrys were the same and you would swear they came from a clone but no from seed and grew like twins..... Not much else to say. Until next week, smoke a fatty, help out your fellow grower.

I came to the conclusion that my issues all stem from the fact that I was doing two things wrong with my watering: 1. Too much (duh) 2. Too fast! I was using a watering can and it is talked about time and time again to use a hand sprayer to ensure even distribution and slow release. It is very challenging with a no till method because I’m impatient and I need to remember that I’m nurturing the living soil, not the plant and this method is far different from my outdoor and hydroponic experience. This weeks schedule looked like this: 12/27: Water and 1/4cup of kashi per plant top dressed 12/28: Nothing 12/29: Nothing 12/30: Water 12/31: Essential Oil foliar spray (ginger, eucalyptus, peppermint, bronners soap) 1/1: Nothing 1/2: Water/Aloe

They were good phenos. Very similar and nice buds. Super dense and dripping in resin. Lovely aromatic smell have been developed and was a great addition to my VERY LARGE crop this time. Both phenos grew great. P1 was just under 10 weeks. Pheno 2 was just touching into wk 7. Amazing smells from both. Dense buds. Big yields. Really happy to have ran this strain. Very fruity, exceptional quality & taste. Averaged about 70-90 grams for Pheno1 & Pheno 2. (Both plants cured 2 + months now. Really happy with my MSNL strains I ran this crop. Will be looking to add more in a few weeks for round 2 of my planned amount. Thanks to my sponsors from MSNL & XPERT NUTRIENTS. AMAZING DUO. Appreciate all who stop by. I thank you and look forward to seen your diaries. Either way thanks for dropping by. DISCOUNT CODE FOR XPERT NUTRIENTS 20% OFF CODE: