Topped the plant in day 29 from seed. Nutrients concentration is dropping 10-20 PPM every 1-2 days. PH is drifting up every day, I have to drop the PH every 1 to 2 days. Light intensity for this week is at 46% ( Fluence Spydr 2i) . After toppling I dropped the light intensity to 36% for a day.

January 31st - Day 120 from seed. I flushed twice with flawless finish over the past 8 days, and harvest day finally arrived for this freak show CBD Cheese Pheno. When I started this grow I had no idea a phenotype from an auto-flower strain could take 120 days from start to finish. That said I'm not complaining about the extra time because she turned out beautifully. Massive, dense, sticky, and aromatic flowers. Thanks for following along. I will update final details once dried. Stay tuned!

I Need cut my plant before 1 week becouse in the night temperature go down 25 F

One more week and we're done !

Day 56 (flowering day 16): My stars of the show right here. These plants are beasts. I can only imagine how they would grow outside. I managed to get #1 as she had just gone to sleep. Her wilted look is due to having enough light for the day so she has dropped off like granny after Christmas Dinner while the kids carry on .lol The structures on these are amazing. They have een slower to flower and I expect a mid Jan 2020 harvest. #1 Sleeping beauty has not missed a beat the whole grow. She continues to wring every last morsel of nutrition from her soil. Tons of bud sites and each branch is looking like a mini version of a whole plant!!. #2 has een moved to the outside for more ligjt and so I can watch her more. she has shown signs of calmag issues so I have made sure to keep that up with the mega crop too. #3 while a lot less wide , has a very thick under belly to her branching. she should support a lot of weight. These ladies will benefit from the earlier harvested strains by getting a light each it seems. let's see what 300w each can do for their lady two weeks. Merry Christmas all

Week 2 and nice and green, we just gave some more organic nutrients like palm tree ash and some guanokalong powder, for the moment its seems to be all good, in 2 weeks I'll be adding some sugars and some more PK

well we are approaching the finish line :) the flowers look full and sticky, full of lots of trichomes,;) if the girl holds out I will let her grow for another 2 weeks.;) the girl drinks 3 liters every 2-3 days :) from today she will only get pure 6.3 ph water :) good luck to everyone.:)

Bien

She's looking very healthy and strong strong, now we're getting a beautiful bushy shape with a few bud sides as you guys can see, I'm about to flip my lady to flower very soon. Let's see what happens!

In love with all of my 5 plants of black cherry punch but this one is one of the most beautiful ones, 100% purple flowers, very dense and awesome fruity sweet smell love it!

My new grow pros solutions under canopy lights are really making the colors pop Introducing White Runtz, a truly unique addition to my garden. This tall, sturdy plant boasts thick stems that support its own weight, and its egg-shaped buds are unlike anything I've seen before. White Runtz has a striking resemblance to other plants I've encountered, yet it possesses a beauty all its own.

3 settimane fioritura

Video quality is so so for closeups with GoPro. Both phenos are super fire 2 more watering and will be flushing for about two weeks should take me near harvest at week 9-10. Mars Hydro FC4800 dimmed at 300w, will help lower temps and bring out those colours.

Vamos familia que ya actualizamos la cosecha de estas Frosted Guava de Zamnesia. Vaya flores que se han marcado repletas de tricomas, parecen escarcha y las flores se marcan aromas muy tropicales, la verdad que únicos. Es una variedad bastante fácil de cultivar pero al tener un periodo de floración algo más largo, hay que estar pendiente de alimentarlas bien, gracias Agrobeta en mi sala es posible. Temperaturas máximas en 24 y mínimas en 20 y una humedad estable en torno al 36%. Las mantuve 10 semanas pero facilmente si se quedan 11 tampoco estaría mal, yo las vi bien maduras y ya tenía tricomas ambar así que les di matarile. Os comento que tengo un descuento y para que compréis en la web de Zamnesia de un 20%, el código es ZAMMIGD2023 The discount 20% and the code is ZAMMIGD2023 https://www.zamnesia.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Espero que disfruteis este diario, buenos humos 💨💨💨

## Week 9 Update: Flowering Phase Progress 🌿🌟 ### 🌱 No Visible Flowering Yet 🌱 Welcome to Week 9! We're fully in the flowering phase now, with the light schedule at 12 hours on and 12 hours off. While we haven't yet observed any distinct flowering traits such as pistils or calyxes, the plants are continuing to grow and develop as expected. --- ### 🌿 Current Plant Status 🌿 **Greenhouse Super Lemon Haze 🌞** - **Growth:** The plant is showing robust vegetative growth, with a well-developed canopy. - **Flowering Progress:** No visible signs of flowering yet, but the plant is preparing for the transition with healthy growth and vigorous energy. **Humboldt Seed Bubba Kush 🌿** - **Growth:** This plant is maintaining its compact, bushy structure, ideal for supporting dense flower production. - **Flowering Progress:** Still no noticeable flowering characteristics. The plant seems to be focusing on building strength and stability. **Blueberry Muffin 🥞** - **Growth:** Continues to develop a strong, dense canopy. - **Flowering Progress:** No clear signs of flowers at this stage. The plant appears to be adjusting to the new light schedule and focusing on foundational growth. --- 🌱 Nutrient and Supplement Update 🌱 To support the plants through this transition phase, the following nutrient and supplement regimen has been applied: Power Roots (PLAGRON): 1 ml/l to enhance root development and overall plant vigor. Pure Zym (PLAGRON): 0.5 ml/l to promote root health and improve nutrient uptake. Terra Bloom (PLAGRON): 2 ml/l to provide essential nutrients for budding and flowering. Power Buds (PLAGRON): 0.5 ml/l to stimulate bud formation and increase flower density. Orgatrex (Bio Tabs): 2 ml/l to ensure a balanced nutrient profile and support plant health. 🌱🌱Feeding Schedule:🌱🌱 Adjusting the nutrient mix to ensure balanced support through early flowering, despite the absence of visible flower development. 🌱Environmental Conditions: 🌱Temperature & Humidity: Carefully monitored and adjusted to support healthy growth and prepare for flowering. T🌱raining & Defoliation: Ongoing: Continuing with LST and selective defoliation to maintain an even canopy and ensure proper light penetration. --- ### 🌸 Looking Ahead 🌸 While we haven't seen any flowering signs yet, the plants are progressing well in their transition to flowering. It's not uncommon for the first signs of flowering to take a little longer, especially if the plants are still focusing on strengthening their overall structure. In the coming weeks, we should begin to see the initial signs of flowering as the plants shift their energy from vegetative growth to bud development. I'll keep a close eye on their progress and make any necessary adjustments to ensure a successful flowering phase. Stay tuned for next week's update as we continue to monitor and support the plants through this important stage! Happy growing! 🌟💚

Forbidden Runtz Auto (Auto Klon) – Harvest ✂️🌿 Tak tenhle experiment vyšel na jedničku! Vzít klon z automatu Forbidden Runtz Auto se neskutečně vyplatilo. Sklizeň je absolutně brutální – to množství hustých palic na jednom klonu je až k neuvěření! Co mě ale dostalo nejvíc, jsou terpeny: vůně je ještě výraznější, ovocnější a pronikavější než u samotné mateřské kytky. Celý cyklus zvládla skvěle, nabrala neskutečnou váhu a vyrostl z ní těžkotonážní výnos. S tímhle auto-klonem maximální spokojenost! 🔥💨 —————————————————————- (EN) Forbidden Runtz Auto (Auto Clone) – Harvest Update ✂️🌿 What a wild experiment! Taking an auto clone from Forbidden Runtz Auto proved to be a massive success. The harvest turned out to be absolutely insane – the sheer amount of dense buds on this clone is unbelievable! What surprised me the most is the terpene profile: the aroma is even more intense, fruity, and sharp than the mother plant itself. It handled the whole cycle amazingly well, packed on serious weight, and turned into a heavy-yielding monster. Extremely satisfied with how this Auto-clone turned out! 🔥💨

I just fed for the last time a few days ago. I can tell she is getting ready because she is not drinking anymore. I think I will flush and let the soil dry then I will chop. She will be down by the end of February. I can't wait....this is the first photo I have ever grown. And I think I am stuck!!! She took about 5 or 6 weeks longer than the autos I've been growing but she is going to give me twice as much, and her buds are rock hard. Can't wait to see how they are when the are dried and cured!!

Partially drained the tank at the start of the week and topped up with ro water and 1ml of final solution per Litre. Last 2.5 days were in darkness. I trimmed the majority of fan leaves before hanging up to dry in the tent today. Started out trimming with the plants in the tent and soon realised it would be much easier to just cut them down whole, hang them upside down outside the tent and trim them up a bit. I have a small dehumidifier and a small fan heater setup in the tent and they have been keeping a humidity level of about 60% and a temp of 16 Celsius for the last few days while the lights have been off. I figure that's a good starting point for drying and I can increase the temperature if needed, that will drop the humidity also. Intake fan at the bottom and extract fan at the top are running constantly as they have been since the grow started (low power 4" fans). I might add back in a fan for circulation depending on how the drying goes, or maybe even trim or hang the plants better to get more airflow around the buds

Week 02 Introduction This week has been a bit of a struggle. Had my first experience dealing with slime and brown algae. But I think adding enzymes and increasing the beneficial bacteria helped to fix the issue. Also experienced nutrient burn for the first time. My nutrient solution strength got as high as 671 PPMs. So backed it down to about 430 PPMs during the end-of-week reservoir change. Also cut Hydroguard (expired?), CaliMagic, and Superthrive from this grow. Now she's still stunted, but is starting to recover. Hopefully... [START OF WEEK 02] Day 01 - Monday - 08/10/20 - Total Days: 008 ----------------------------------- - [0830]: Still looks a bit yellow. But getting larger! --- Solution strength was at 248 PPMs. --- Just topped off with a bit of distilled water --- PH went up to 6.1 so PH'd down to 5.8 --- Ran the top feed for a bit to wet the hydroton. - [2130]: She's looking even more yellow now. --- Even the new leaves are really yellow. --- Decided to add more base nutes. --- Added 4ml of Sensi A --- Added 4ml of Sensi B --- Now at about --- Solution Strength went up to 304 PPM. --- PH was at 6, --- Also raised the water level a bit more. --- I really hope it's a nutrient deficiency and not an over-watering issue. --- Please live! Day 02 - Tuesday - 08/11/20 - Total Days: 009 ----------------------------------- - [0830]: Looking less droopy. But still yellow. --- Decided to do a reservoir change. --- 4.5gal of distilled water --- 8ml of Sensi Grow A --- 8ml of Sensi Grow B --- 8ml of Voodoo Juice --- 4ml of B-52 --- 4ml of CaliMagic --- 4ml of Hydroguard --- 4 drops of Superthrive --- PH'd down to 5.8 --- Solution strength: 302 PPM --- Since I didn't want to risk over-watering the rockwool, I did not to do a top feed, may do one tonight after the sleep cycle (lights are still set to go off at 10am and back on at 4pm). --- As I was doing a reservoir change, I noticed that the tubes and bucket were a bit slimy. Didn't really stink or anything. Is this normal? Maybe due to the Hydroguard and Voodoo Juice? --- I hope she gets better soon! - [2215]: Getting larger! But still yellow. --- Also can see a root growing through the net pot! Tiny little thing but it's there! Will have to start dropping water once more appear. --- After looking over a few DWC diaries using AN nutes, seems like my solution strength is still too low. Most around this stage average around 500 PPMs with about 4ml per gallon. --- Top fed for a minute to wet the top of the hydroton. --- Solution strength went down to 263 PPM. --- Added 8ml more of Sensi A --- Added 8ml more of Sensi B --- Now base nutes are at 16ml for 4.5 gal of water. --- PPMs went up to 411. --- Still lower than 500 PPMs, but that's okay. --- PH was at 6. Not sure if I should adjust PH using AN nutes. So going to not ajdust unless PH goes above 6.1. Day 03 - Wednesday - 08/12/20 - Total Days: 010 ----------------------------------- - [0830]: Looks like more root growth! --- She still looks yellow. But leaves are perky. --- PH was at 6.2 so lowered down to 5.8. --- Solution strength was at 394 PPMs --- Since roots are still growing, I decide to lower the water level a bit. Now water level is a bit below the net pot. - [2200]: Root is getting longer! --- Slime is returning. Not sure why. --- Solution strength: 357 PPMs --- PH: 6.1 --- Decided to add an enzyme along with more beneficial bacteria to hopefully cure the slime. --- Added 16ml of Sensizym --- Added 5ml of Hydroguard --- Added 8ml of Voodoo Juice --- New solution strength: 430 PPMs --- New PH: 6.1 --- Top fed for a minute. --- This slimy residue is really freaking me out! I hope the added enzymes will help eliminate the slime. --- Going to do a full reservoir sterilization/nutrient change over the weekend. Please survive until then girl! Day 04 - Thursday - 08/13/20 - Total Days: 011 ----------------------------------- - [0930]: I think the enzymes worked! There is little to no slime now! --- Although I think the root was also dissolved in the process. It's now just a little stub sticking just below the net pot. The enzyme is also suppose to dissolved dead roots too but guess that root was too weak? Not sure what happened there. But I think the slime is cured! --- Solution strength went down to 395 PPMs. Decided to add more base nutrients. --- Added 8ml of Sensi A --- Added 8ml of Sensi B --- Added 4ml of B-52 --- Solution strength went up to 598 PPMs. --- PH was at 6.1 --- As long as the PH is between 5.5 and 6.3, I'm not going to use PH Up or Down. But still will monitor PH levels. - [1715]: Checked up on her after her nap and shes looking alive but stunted. But no slime! --- Decided to add some sugars to help maintain the enzymes and beneficial bacteria. --- Solution strength was at 587 PPMs. --- PH was at 6.2 --- Added 8ml of Bud Candy --- Solution strength went up to 671 PPMs. --- PH also went up to 6.3 --- Lowered water level a bit to hopefully promote more root growth. --- Top fed for a minute. --- She is getting bigger, but still looks yellow. Day 05 - Friday - 08/14/20 - Total Days: 012 ----------------------------------- - [0915]: Leaves look a little burnt on the tips. Still no slime. --- Going to back off on the PPMs to hopefully fix the nutrient toxicity. --- Solution strength was at 632 PPMs --- PH was at 6.3 --- Added/Removed water until PPMs were at 536. --- PH was still at 6.3 --- Raised water up a bit, then top fed for a minute. - [2200]: Looking better. Still yellow though. --- Solution strength: 514 PPMs --- PH: 6.5 --- Added PH down. --- New solution strength: 518 PPMs --- New PH: 5.2 --- PH was kind of high. So decided to PH down. Had to use quite a bit to bring it down. But eventually got it to drop down to 5.3. A little low, but so far, the PH has always gone up so wanted to start it really low. --- Ran the top feed for a minute to re-saturate the top of the hydroton. Day 06 - Saturday - 08/15/20 - Total Days: 013 ----------------------------------- - [0830]: She looks stunted. leaves are still yellow. --- Solution strength: 514 PPMs --- PH: 5.6 --- Top fed for a minute. --- Not sure what to do at this point. Going to do another reservoir change soon. Hoping she lives until then. - [2145]: Looking pretty much the same. --- A bit of slime has returned. Since I've been diluting the nutrient solution, the enzyme ratio has dropped. So I guess this is expected. --- Also noticed that slime build up was on the air-stones. Never really checked the stones so not sure how long that has been there. Looks brown too, which can't be good. --- Going to do an H202 sterilization of the system (minus the net pot) tomorrow so did not add anything. --- Lowered the water level to below the net pot. --- Then top fed for a minute. Day 07 - Sunday - 08/16/20 - Total Days: 014 ----------------------------------- - [0900]: STERILIZATION DAY! --- Decided to skip today's night cycle for a deep clean. --- I'm hoping that skipping a night cycle won't be too stressful. --- Temporarily moved her to a new bucket. --- Used about a half of gallon of straight distilled water to flush out the net pot. --- Drained the system and wiped up all the brown sludge. Also removed the air stones and cleaned up all the goo. --- Filled the system with 2 gallons of distilled water and at least 30ml of food grade hydrogen peroxide (35% strength). --- Yea its a lot, but since I'm not going to sterilize the system overnight, I went with a really high doseage. Basically I kept adding until I started to see little bubbles start to form. --- Then I ran the water pump. - [0915]: Boiled the air stones in tap water for about 10 min. Then reconnected them to the airlines. --- I let the air stones and hose soak in the sterilization solution for about 5 minutes so the peroxide can absorb into the stones. Then ran the air stone to help mix and agitate the solution. --- Occasionally, I'd repeat the process of turning the air pump off for a few minutes to let the stones soak. - [1000]: Covered the top two row of holes of the net pot with some aluminum tape. Hopefully this solves the light leaking in through the hydroton. - [1200]: Used an old toothbrush and scrubbed the pump clean. Then drained the system. --- Refilled with more distilled water and peroxide. Again added a lot. --- Ran system again to sterilize even more. - [1530]: Drained the system and refilled with distilled water to rinse. --- Ran the system for a few minutes, then drained and rinsed again. --- Did this a few more times over about an hour. - [1630]: Added 4 gallons of fresh distilled water. --- Added 15ml Sensi Grow A --- Added 15ml Sensi Grow B --- Added 12ml of B-52 --- Added 16ml of Voodoo Juice --- Added 16ml Sensizym --- Solution strength was at 430 PPMs --- PH was at 5.6 --- I was going to add Hydroguard, but I think the bottle is expired. Since 2017 or 2018!? I think Hydroguard is good for up to 2 years from the date on the bottle or 6 months after opening. So not going to use from now on. I wonder if this could have contributed to the slime build up. --- Also removed the CaliMagic and Superthrive too. Going to only use AN products to eliminate the chance of incompatible nutrients. --- Placed her back in the bucket and top fed for a minute. --- Here's hoping for the best. Going to let it ride until morning! Please feel better! [END OF WEEK 02]

Love this strain!! Nutty and meaty spicy terps one one of my favourite to medicate with and grow Both plants where grown in 1 gallon pots so nothing to big of a yield but was expected with the small pots . One plant was canna nutrients one was remo nutrients